NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. net.ipv6.conf.all.addr_gen_mode = 0 Memory mapped at address 0xffffbea79000. Read at address 0x00600018 (0xffffbea79018): 0x00000000 Write at address 0x00600018 (0xffffbea79018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae24a000. Read at address 0x00600018 (0xffffae24a018): 0x00000000 Write at address 0x00600018 (0xffffae24a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff839fa000. Read at address 0x00600018 (0xffff839fa018): 0x00000000 Write at address 0x00600018 (0xffff839fa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa36a6000. Read at address 0x00600018 (0xffffa36a6018): 0x00000000 Write at address 0x00600018 (0xffffa36a6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba465000. Read at address 0x00600018 (0xffffba465018): 0x00000000 Write at address 0x00600018 (0xffffba465018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done Waiting data available... [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fb0b000. Read at address 0x00600018 (0xffff7fb0b018): 0x00000000 Write at address 0x00600018 (0xffff7fb0b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff96cc7000. Read at address 0x00600018 (0xffff96cc7018): 0x00000000 Write at address 0x00600018 (0xffff96cc7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 0 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 Waiting data available... Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89462000. Read at address 0x00600018 (0xffff89462018): 0x00000000 Write at address 0x00600018 (0xffff89462018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87de9000. Read at address 0x00600018 (0xffff87de9018): 0x00000000 Write at address 0x00600018 (0xffff87de9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9fa81000. Read at address 0x00600018 (0xffff9fa81018): 0x00000000 Write at address 0x00600018 (0xffff9fa81018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 0 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 Waiting data available... Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f2c6000. Read at address 0x00600018 (0xffff8f2c6018): 0x00000000 Write at address 0x00600018 (0xffff8f2c6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84895000. Read at address 0x00600018 (0xffff84895018): 0x00000000 Write at address 0x00600018 (0xffff84895018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa84e3000. Read at address 0x00600018 (0xffffa84e3018): 0x00000000 Write at address 0x00600018 (0xffffa84e3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff88e6b000. Read at address 0x00600018 (0xffff88e6b018): 0x00000000 Write at address 0x00600018 (0xffff88e6b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf3dc000. Read at address 0x00600018 (0xffffaf3dc018): 0x00000000 Write at address 0x00600018 (0xffffaf3dc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 0 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 Waiting data available... Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa312d000. Read at address 0x00600018 (0xffffa312d018): 0x00000000 Write at address 0x00600018 (0xffffa312d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffae31c000. Read at address 0x00600018 (0xffffae31c018): 0x00000000 Write at address 0x00600018 (0xffffae31c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb6a8c000. Read at address 0x00600018 (0xffffb6a8c018): 0x00000000 Write at address 0x00600018 (0xffffb6a8c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 Waiting data available... DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen net.ipv6.conf.all.disable_ipv6 = 0 stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94833000. Read at address 0x00600018 (0xffff94833018): 0x00000000 Write at address 0x00600018 (0xffff94833018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 ubi2:dml_code is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbf40c000. Read at address 0x00600018 (0xffffbf40c018): 0x00000000 Write at address 0x00600018 (0xffffbf40c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbdfb5000. Read at address 0x00600018 (0xffffbdfb5018): 0x00000000 Write at address 0x00600018 (0xffffbdfb5018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: Waiting data available... done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8e716000. Read at address 0x00600018 (0xffff8e716018): 0x00000000 Write at address 0x00600018 (0xffff8e716018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff99233000. Read at address 0x00600018 (0xffff99233018): 0x00000000 Write at address 0x00600018 (0xffff99233018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa7c33000. Read at address 0x00600018 (0xffffa7c33018): 0x00000000 Write at address 0x00600018 (0xffffa7c33018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6858000. Read at address 0x00600018 (0xffffa6858018): 0x00000000 Write at address 0x00600018 (0xffffa6858018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff973a6000. Read at address 0x00600018 (0xffff973a6018): 0x00000000 Write at address 0x00600018 (0xffff973a6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92174000. Read at address 0x00600018 (0xffff92174018): 0x00000000 Write at address 0x00600018 (0xffff92174018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 0 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 Waiting data available... Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87c2f000. Read at address 0x00600018 (0xffff87c2f018): 0x00000000 Write at address 0x00600018 (0xffff87c2f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87fe3000. Read at address 0x00600018 (0xffff87fe3018): 0x00000000 Write at address 0x00600018 (0xffff87fe3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87200000. Read at address 0x00600018 (0xffff87200018): 0x00000000 Write at address 0x00600018 (0xffff87200018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf1f9000. Read at address 0x00600018 (0xffffbf1f9018): 0x00000000 Write at address 0x00600018 (0xffffbf1f9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0450000. Read at address 0x00600018 (0xffffb0450018): 0x00000000 Write at address 0x00600018 (0xffffb0450018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done Waiting data available... [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbb409000. Read at address 0x00600018 (0xffffbb409018): 0x00000000 Write at address 0x00600018 (0xffffbb409018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 0 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 Waiting data available... Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ff0d000. Read at address 0x00600018 (0xffff9ff0d018): 0x00000000 Write at address 0x00600018 (0xffff9ff0d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa93ac000. Read at address 0x00600018 (0xffffa93ac018): 0x00000000 Write at address 0x00600018 (0xffffa93ac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 net.ipv6.conf.eth0.dad_transmits = 0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe898000. Read at address 0x00600018 (0xffffbe898018): 0x00000000 Write at address 0x00600018 (0xffffbe898018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cad1000. Read at address 0x00600018 (0xffff9cad1018): 0x00000000 Write at address 0x00600018 (0xffff9cad1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: Waiting data available... done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4f65000. Read at address 0x00600018 (0xffffa4f65018): 0x00000000 Write at address 0x00600018 (0xffffa4f65018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd755000. Read at address 0x00600018 (0xffffbd755018): 0x00000000 Write at address 0x00600018 (0xffffbd755018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2a04000. Read at address 0x00600018 (0xffffa2a04018): 0x00000000 Write at address 0x00600018 (0xffffa2a04018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb1c9e000. Read at address 0x00600018 (0xffffb1c9e018): 0x00000000 Write at address 0x00600018 (0xffffb1c9e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8844000. Read at address 0x00600018 (0xffffb8844018): 0x00000000 Write at address 0x00600018 (0xffffb8844018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9121000. Read at address 0x00600018 (0xffffb9121018): 0x00000000 Write at address 0x00600018 (0xffffb9121018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9df8c000. Read at address 0x00600018 (0xffff9df8c018): 0x00000000 Write at address 0x00600018 (0xffff9df8c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb69c1000. Read at address 0x00600018 (0xffffb69c1018): 0x00000000 Write at address 0x00600018 (0xffffb69c1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bce6000. Read at address 0x00600018 (0xffff9bce6018): 0x00000000 Write at address 0x00600018 (0xffff9bce6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa1324000. Read at address 0x00600018 (0xffffa1324018): 0x00000000 Write at address 0x00600018 (0xffffa1324018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90991000. Read at address 0x00600018 (0xffff90991018): 0x00000000 Write at address 0x00600018 (0xffff90991018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb72ac000. Read at address 0x00600018 (0xffffb72ac018): 0x00000000 Write at address 0x00600018 (0xffffb72ac018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97d6d000. Read at address 0x00600018 (0xffff97d6d018): 0x00000000 Write at address 0x00600018 (0xffff97d6d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa1a3a000. Read at address 0x00600018 (0xffffa1a3a018): 0x00000000 Write at address 0x00600018 (0xffffa1a3a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff924ee000. Read at address 0x00600018 (0xffff924ee018): 0x00000000 Write at address 0x00600018 (0xffff924ee018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff946f5000. Read at address 0x00600018 (0xffff946f5018): 0x00000000 Write at address 0x00600018 (0xffff946f5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2217000. Read at address 0x00600018 (0xffffa2217018): 0x00000000 Write at address 0x00600018 (0xffffa2217018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 0 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 Waiting data available... Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 3 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb0aad000. Read at address 0x00600018 (0xffffb0aad018): 0x00000000 Write at address 0x00600018 (0xffffb0aad018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9aa9f000. Read at address 0x00600018 (0xffff9aa9f018): 0x00000000 Write at address 0x00600018 (0xffff9aa9f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97e8d000. Read at address 0x00600018 (0xffff97e8d018): 0x00000000 Write at address 0x00600018 (0xffff97e8d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 0 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 Waiting data available... Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87421000. Read at address 0x00600018 (0xffff87421018): 0x00000000 Write at address 0x00600018 (0xffff87421018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb4012000. Read at address 0x00600018 (0xffffb4012018): 0x00000000 Write at address 0x00600018 (0xffffb4012018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab7f0000. Read at address 0x00600018 (0xffffab7f0018): 0x00000000 Write at address 0x00600018 (0xffffab7f0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1a09000. Read at address 0x00600018 (0xffffa1a09018): 0x00000000 Write at address 0x00600018 (0xffffa1a09018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: Waiting data available... done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8902000. Read at address 0x00600018 (0xffffa8902018): 0x00000000 Write at address 0x00600018 (0xffffa8902018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9fdf9000. Read at address 0x00600018 (0xffff9fdf9018): 0x00000000 Write at address 0x00600018 (0xffff9fdf9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa864d000. Read at address 0x00600018 (0xffffa864d018): 0x00000000 Write at address 0x00600018 (0xffffa864d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7a3a000. Read at address 0x00600018 (0xffffa7a3a018): 0x00000000 Write at address 0x00600018 (0xffffa7a3a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb2dca000. Read at address 0x00600018 (0xffffb2dca018): 0x00000000 Write at address 0x00600018 (0xffffb2dca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 net.ipv6.conf.eth0.dad_transmits = 0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fcf7000. Read at address 0x00600018 (0xffff8fcf7018): 0x00000000 Write at address 0x00600018 (0xffff8fcf7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb536d000. Read at address 0x00600018 (0xffffb536d018): 0x00000000 Write at address 0x00600018 (0xffffb536d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa939e000. Read at address 0x00600018 (0xffffa939e018): 0x00000000 Write at address 0x00600018 (0xffffa939e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96a39000. Read at address 0x00600018 (0xffff96a39018): 0x00000000 Write at address 0x00600018 (0xffff96a39018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87c22000. Read at address 0x00600018 (0xffff87c22018): 0x00000000 Write at address 0x00600018 (0xffff87c22018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7545000. Read at address 0x00600018 (0xffffb7545018): 0x00000000 Write at address 0x00600018 (0xffffb7545018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff85531000. Read at address 0x00600018 (0xffff85531018): 0x00000000 Write at address 0x00600018 (0xffff85531018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: Waiting data available... done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb10d8000. Read at address 0x00600018 (0xffffb10d8018): 0x00000000 Write at address 0x00600018 (0xffffb10d8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 Waiting data available... DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa3c7d000. Read at address 0x00600018 (0xffffa3c7d018): 0x00000000 Write at address 0x00600018 (0xffffa3c7d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa894c000. Read at address 0x00600018 (0xffffa894c018): 0x00000000 Write at address 0x00600018 (0xffffa894c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 0 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 Waiting data available... Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbcc64000. Read at address 0x00600018 (0xffffbcc64018): 0x00000000 Write at address 0x00600018 (0xffffbcc64018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffafa0f000. Read at address 0x00600018 (0xffffafa0f018): 0x00000000 Write at address 0x00600018 (0xffffafa0f018): 0x00400040, readback 0x00400040 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff986b5000. Read at address 0x00600018 (0xffff986b5018): 0x00000000 Write at address 0x00600018 (0xffff986b5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff903ec000. Read at address 0x00600018 (0xffff903ec018): 0x00000000 Write at address 0x00600018 (0xffff903ec018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa38b0000. Read at address 0x00600018 (0xffffa38b0018): 0x00000000 Write at address 0x00600018 (0xffffa38b0018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff925d6000. Read at address 0x00600018 (0xffff925d6018): 0x00000000 Write at address 0x00600018 (0xffff925d6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89ec2000. Read at address 0x00600018 (0xffff89ec2018): 0x00000000 Write at address 0x00600018 (0xffff89ec2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff86316000. Read at address 0x00600018 (0xffff86316018): 0x00000000 Write at address 0x00600018 (0xffff86316018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89ba1000. Read at address 0x00600018 (0xffff89ba1018): 0x00000000 Write at address 0x00600018 (0xffff89ba1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8f679000. Read at address 0x00600018 (0xffff8f679018): 0x00000000 Write at address 0x00600018 (0xffff8f679018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff921f5000. Read at address 0x00600018 (0xffff921f5018): 0x00000000 Write at address 0x00600018 (0xffff921f5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0361000. Read at address 0x00600018 (0xffffa0361018): 0x00000000 Write at address 0x00600018 (0xffffa0361018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9be94000. Read at address 0x00600018 (0xffff9be94018): 0x00000000 Write at address 0x00600018 (0xffff9be94018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8b9b000. Read at address 0x00600018 (0xffffa8b9b018): 0x00000000 Write at address 0x00600018 (0xffffa8b9b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81a49000. Read at address 0x00600018 (0xffff81a49018): 0x00000000 Write at address 0x00600018 (0xffff81a49018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4044000. Read at address 0x00600018 (0xffffa4044018): 0x00000000 Write at address 0x00600018 (0xffffa4044018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbca2a000. Read at address 0x00600018 (0xffffbca2a018): 0x00000000 Write at address 0x00600018 (0xffffbca2a018): 0x00400040, readback 0x00400040 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 0 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 Waiting data available... Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bf3b000. Read at address 0x00600018 (0xffff9bf3b018): 0x00000000 Write at address 0x00600018 (0xffff9bf3b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf081000. Read at address 0x00600018 (0xffffbf081018): 0x00000000 Write at address 0x00600018 (0xffffbf081018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffaef3c000. Read at address 0x00600018 (0xffffaef3c018): 0x00000000 Write at address 0x00600018 (0xffffaef3c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8d20000. Read at address 0x00600018 (0xffffa8d20018): 0x00000000 Write at address 0x00600018 (0xffffa8d20018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8774b000. Read at address 0x00600018 (0xffff8774b018): 0x00000000 Write at address 0x00600018 (0xffff8774b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95eed000. Read at address 0x00600018 (0xffff95eed018): 0x00000000 Write at address 0x00600018 (0xffff95eed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95d42000. Read at address 0x00600018 (0xffff95d42018): 0x00000000 Write at address 0x00600018 (0xffff95d42018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9543f000. Read at address 0x00600018 (0xffff9543f018): 0x00000000 Write at address 0x00600018 (0xffff9543f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb8cb000. Read at address 0x00600018 (0xffffbb8cb018): 0x00000000 Write at address 0x00600018 (0xffffbb8cb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 0 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 Waiting data available... Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa515e000. Read at address 0x00600018 (0xffffa515e018): 0x00000000 Write at address 0x00600018 (0xffffa515e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: Waiting data available... done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1cc6000. Read at address 0x00600018 (0xffffa1cc6018): 0x00000000 Write at address 0x00600018 (0xffffa1cc6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: Waiting data available... done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff802f0000. Read at address 0x00600018 (0xffff802f0018): 0x00000000 Write at address 0x00600018 (0xffff802f0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf290000. Read at address 0x00600018 (0xffffbf290018): 0x00000000 Write at address 0x00600018 (0xffffbf290018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91a45000. Read at address 0x00600018 (0xffff91a45018): 0x00000000 Write at address 0x00600018 (0xffff91a45018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf548000. Read at address 0x00600018 (0xffffbf548018): 0x00000000 Write at address 0x00600018 (0xffffbf548018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Loaded PowerVR consumer services. [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 0 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 Waiting data available... Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 3 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbb0d2000. Read at address 0x00600018 (0xffffbb0d2018): 0x00000000 Write at address 0x00600018 (0xffffbb0d2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff924dc000. Read at address 0x00600018 (0xffff924dc018): 0x00000000 Write at address 0x00600018 (0xffff924dc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc529000. Read at address 0x00600018 (0xffffbc529018): 0x00000000 Write at address 0x00600018 (0xffffbc529018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff98560000. Read at address 0x00600018 (0xffff98560018): 0x00000000 Write at address 0x00600018 (0xffff98560018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb78b4000. Read at address 0x00600018 (0xffffb78b4018): 0x00000000 Write at address 0x00600018 (0xffffb78b4018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbde1b000. Read at address 0x00600018 (0xffffbde1b018): 0x00000000 Write at address 0x00600018 (0xffffbde1b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffae8e3000. Read at address 0x00600018 (0xffffae8e3018): 0x00000000 Write at address 0x00600018 (0xffffae8e3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa76db000. Read at address 0x00600018 (0xffffa76db018): 0x00000000 Write at address 0x00600018 (0xffffa76db018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1781000. Read at address 0x00600018 (0xffffb1781018): 0x00000000 Write at address 0x00600018 (0xffffb1781018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbdea000. Read at address 0x00600018 (0xffffbbdea018): 0x00000000 Write at address 0x00600018 (0xffffbbdea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8eb4a000. Read at address 0x00600018 (0xffff8eb4a018): 0x00000000 Write at address 0x00600018 (0xffff8eb4a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 Waiting data available... DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa6866000. Read at address 0x00600018 (0xffffa6866018): 0x00000000 Write at address 0x00600018 (0xffffa6866018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf733000. Read at address 0x00600018 (0xffffaf733018): 0x00000000 Write at address 0x00600018 (0xffffaf733018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: Waiting data available... done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff992b4000. Read at address 0x00600018 (0xffff992b4018): 0x00000000 Write at address 0x00600018 (0xffff992b4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83238000. Read at address 0x00600018 (0xffff83238018): 0x00000000 Write at address 0x00600018 (0xffff83238018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94e0c000. Read at address 0x00600018 (0xffff94e0c018): 0x00000000 Write at address 0x00600018 (0xffff94e0c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0509000. Read at address 0x00600018 (0xffffb0509018): 0x00000000 Write at address 0x00600018 (0xffffb0509018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa28f0000. Read at address 0x00600018 (0xffffa28f0018): 0x00000000 Write at address 0x00600018 (0xffffa28f0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9b263000. Read at address 0x00600018 (0xffff9b263018): 0x00000000 Write at address 0x00600018 (0xffff9b263018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a255000. Read at address 0x00600018 (0xffff8a255018): 0x00000000 Write at address 0x00600018 (0xffff8a255018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f67a000. Read at address 0x00600018 (0xffff9f67a018): 0x00000000 Write at address 0x00600018 (0xffff9f67a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff80311000. Read at address 0x00600018 (0xffff80311018): 0x00000000 Write at address 0x00600018 (0xffff80311018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: Waiting data available... done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d0ff000. Read at address 0x00600018 (0xffff8d0ff018): 0x00000000 Write at address 0x00600018 (0xffff8d0ff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8acb8000. Read at address 0x00600018 (0xffff8acb8018): 0x00000000 Write at address 0x00600018 (0xffff8acb8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: Waiting data available... done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ab20000. Read at address 0x00600018 (0xffff8ab20018): 0x00000000 Write at address 0x00600018 (0xffff8ab20018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95e0d000. Read at address 0x00600018 (0xffff95e0d018): 0x00000000 Write at address 0x00600018 (0xffff95e0d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb12fa000. Read at address 0x00600018 (0xffffb12fa018): 0x00000000 Write at address 0x00600018 (0xffffb12fa018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88be4000. Read at address 0x00600018 (0xffff88be4018): 0x00000000 Write at address 0x00600018 (0xffff88be4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff88c49000. Read at address 0x00600018 (0xffff88c49018): 0x00000000 Write at address 0x00600018 (0xffff88c49018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bc36000. Read at address 0x00600018 (0xffff9bc36018): 0x00000000 Write at address 0x00600018 (0xffff9bc36018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6f03000. Read at address 0x00600018 (0xffffa6f03018): 0x00000000 Write at address 0x00600018 (0xffffa6f03018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89a18000. Read at address 0x00600018 (0xffff89a18018): 0x00000000 Write at address 0x00600018 (0xffff89a18018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8eb81000. Read at address 0x00600018 (0xffff8eb81018): 0x00000000 Write at address 0x00600018 (0xffff8eb81018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8386c000. Read at address 0x00600018 (0xffff8386c018): 0x00000000 Write at address 0x00600018 (0xffff8386c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff7ff95000. Read at address 0x00600018 (0xffff7ff95018): 0x00000000 Write at address 0x00600018 (0xffff7ff95018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89d73000. Read at address 0x00600018 (0xffff89d73018): 0x00000000 Write at address 0x00600018 (0xffff89d73018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8422d000. Read at address 0x00600018 (0xffff8422d018): 0x00000000 Write at address 0x00600018 (0xffff8422d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5b37000. Read at address 0x00600018 (0xffffb5b37018): 0x00000000 Write at address 0x00600018 (0xffffb5b37018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb72b7000. Read at address 0x00600018 (0xffffb72b7018): 0x00000000 Write at address 0x00600018 (0xffffb72b7018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff923d0000. Read at address 0x00600018 (0xffff923d0018): 0x00000000 Write at address 0x00600018 (0xffff923d0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa12b4000. Read at address 0x00600018 (0xffffa12b4018): 0x00000000 Write at address 0x00600018 (0xffffa12b4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90672000. Read at address 0x00600018 (0xffff90672018): 0x00000000 Write at address 0x00600018 (0xffff90672018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 0 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 Waiting data available... Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 3 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8ce2d000. Read at address 0x00600018 (0xffff8ce2d018): 0x00000000 Write at address 0x00600018 (0xffff8ce2d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa65c7000. Read at address 0x00600018 (0xffffa65c7018): 0x00000000 Write at address 0x00600018 (0xffffa65c7018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f247000. Read at address 0x00600018 (0xffff8f247018): 0x00000000 Write at address 0x00600018 (0xffff8f247018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff91e8c000. Read at address 0x00600018 (0xffff91e8c018): 0x00000000 Write at address 0x00600018 (0xffff91e8c018): 0x00400040, readback 0x00400040 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa4fb6000. Read at address 0x00600018 (0xffffa4fb6018): 0x00000000 Write at address 0x00600018 (0xffffa4fb6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd8ad000. Read at address 0x00600018 (0xffffbd8ad018): 0x00000000 Write at address 0x00600018 (0xffffbd8ad018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94390000. Read at address 0x00600018 (0xffff94390018): 0x00000000 Write at address 0x00600018 (0xffff94390018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9ee63000. Read at address 0x00600018 (0xffff9ee63018): 0x00000000 Write at address 0x00600018 (0xffff9ee63018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff7fd66000. Read at address 0x00600018 (0xffff7fd66018): 0x00000000 Write at address 0x00600018 (0xffff7fd66018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81cd0000. Read at address 0x00600018 (0xffff81cd0018): 0x00000000 Write at address 0x00600018 (0xffff81cd0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d88b000. Read at address 0x00600018 (0xffff8d88b018): 0x00000000 Write at address 0x00600018 (0xffff8d88b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8d530000. Read at address 0x00600018 (0xffff8d530018): 0x00000000 Write at address 0x00600018 (0xffff8d530018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80911000. Read at address 0x00600018 (0xffff80911018): 0x00000000 Write at address 0x00600018 (0xffff80911018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff83125000. Read at address 0x00600018 (0xffff83125018): 0x00000000 Write at address 0x00600018 (0xffff83125018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8a941000. Read at address 0x00600018 (0xffff8a941018): 0x00000000 Write at address 0x00600018 (0xffff8a941018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb57f9000. Read at address 0x00600018 (0xffffb57f9018): 0x00000000 Write at address 0x00600018 (0xffffb57f9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff7fffd000. Read at address 0x00600018 (0xffff7fffd018): 0x00000000 Write at address 0x00600018 (0xffff7fffd018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8f2e000. Read at address 0x00600018 (0xffffa8f2e018): 0x00000000 Write at address 0x00600018 (0xffffa8f2e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9e3ca000. Read at address 0x00600018 (0xffff9e3ca018): 0x00000000 Write at address 0x00600018 (0xffff9e3ca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff7fa0f000. Read at address 0x00600018 (0xffff7fa0f018): 0x00000000 Write at address 0x00600018 (0xffff7fa0f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff995a1000. Read at address 0x00600018 (0xffff995a1018): 0x00000000 Write at address 0x00600018 (0xffff995a1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8d56b000. Read at address 0x00600018 (0xffff8d56b018): 0x00000000 Write at address 0x00600018 (0xffff8d56b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb4d0a000. Read at address 0x00600018 (0xffffb4d0a018): 0x00000000 Write at address 0x00600018 (0xffffb4d0a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa48af000. Read at address 0x00600018 (0xffffa48af018): 0x00000000 Write at address 0x00600018 (0xffffa48af018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff957a6000. Read at address 0x00600018 (0xffff957a6018): 0x00000000 Write at address 0x00600018 (0xffff957a6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9c8cb000. Read at address 0x00600018 (0xffff9c8cb018): 0x00000000 Write at address 0x00600018 (0xffff9c8cb018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8aa18000. Read at address 0x00600018 (0xffff8aa18018): 0x00000000 Write at address 0x00600018 (0xffff8aa18018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d799000. Read at address 0x00600018 (0xffff9d799018): 0x00000000 Write at address 0x00600018 (0xffff9d799018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff936ad000. Read at address 0x00600018 (0xffff936ad018): 0x00000000 Write at address 0x00600018 (0xffff936ad018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa637b000. Read at address 0x00600018 (0xffffa637b018): 0x00000000 Write at address 0x00600018 (0xffffa637b018): 0x00400040, readback 0x00400040 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94ae9000. Read at address 0x00600018 (0xffff94ae9018): 0x00000000 Write at address 0x00600018 (0xffff94ae9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9237b000. Read at address 0x00600018 (0xffff9237b018): 0x00000000 Write at address 0x00600018 (0xffff9237b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81cf3000. Read at address 0x00600018 (0xffff81cf3018): 0x00000000 Write at address 0x00600018 (0xffff81cf3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94812000. Read at address 0x00600018 (0xffff94812018): 0x00000000 Write at address 0x00600018 (0xffff94812018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae761000. Read at address 0x00600018 (0xffffae761018): 0x00000000 Write at address 0x00600018 (0xffffae761018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa58ed000. Read at address 0x00600018 (0xffffa58ed018): 0x00000000 Write at address 0x00600018 (0xffffa58ed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb42bc000. Read at address 0x00600018 (0xffffb42bc018): 0x00000000 Write at address 0x00600018 (0xffffb42bc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89807000. Read at address 0x00600018 (0xffff89807018): 0x00000000 Write at address 0x00600018 (0xffff89807018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: Waiting data available... done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8753c000. Read at address 0x00600018 (0xffff8753c018): 0x00000000 Write at address 0x00600018 (0xffff8753c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 0 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 Waiting data available... Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa5228000. Read at address 0x00600018 (0xffffa5228018): 0x00000000 Write at address 0x00600018 (0xffffa5228018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8bf23000. Read at address 0x00600018 (0xffff8bf23018): 0x00000000 Write at address 0x00600018 (0xffff8bf23018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb69e6000. Read at address 0x00600018 (0xffffb69e6018): 0x00000000 Write at address 0x00600018 (0xffffb69e6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7ac9000. Read at address 0x00600018 (0xffffb7ac9018): 0x00000000 Write at address 0x00600018 (0xffffb7ac9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9d7e000. Read at address 0x00600018 (0xffffa9d7e018): 0x00000000 Write at address 0x00600018 (0xffffa9d7e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa3988000. Read at address 0x00600018 (0xffffa3988018): 0x00000000 Write at address 0x00600018 (0xffffa3988018): 0x00400040, readback 0x00400040 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa44cc000. Read at address 0x00600018 (0xffffa44cc018): 0x00000000 Write at address 0x00600018 (0xffffa44cc018): 0x00400040, readback 0x00400040 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9db5f000. Read at address 0x00600018 (0xffff9db5f018): 0x00000000 Write at address 0x00600018 (0xffff9db5f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6e50000. Read at address 0x00600018 (0xffffb6e50018): 0x00000000 Write at address 0x00600018 (0xffffb6e50018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b951000. Read at address 0x00600018 (0xffff9b951018): 0x00000000 Write at address 0x00600018 (0xffff9b951018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb34e4000. Read at address 0x00600018 (0xffffb34e4018): 0x00000000 Write at address 0x00600018 (0xffffb34e4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95286000. Read at address 0x00600018 (0xffff95286018): 0x00000000 Write at address 0x00600018 (0xffff95286018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8a511000. Read at address 0x00600018 (0xffff8a511018): 0x00000000 Write at address 0x00600018 (0xffff8a511018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff93dff000. Read at address 0x00600018 (0xffff93dff018): 0x00000000 Write at address 0x00600018 (0xffff93dff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb046b000. Read at address 0x00600018 (0xffffb046b018): 0x00000000 Write at address 0x00600018 (0xffffb046b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffab96c000. Read at address 0x00600018 (0xffffab96c018): 0x00000000 Write at address 0x00600018 (0xffffab96c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2245000. Read at address 0x00600018 (0xffffa2245018): 0x00000000 Write at address 0x00600018 (0xffffa2245018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa2798000. Read at address 0x00600018 (0xffffa2798018): 0x00000000 Write at address 0x00600018 (0xffffa2798018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff92e47000. Read at address 0x00600018 (0xffff92e47018): 0x00000000 Write at address 0x00600018 (0xffff92e47018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bb7c000. Read at address 0x00600018 (0xffff9bb7c018): 0x00000000 Write at address 0x00600018 (0xffff9bb7c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8bb26000. Read at address 0x00600018 (0xffff8bb26018): 0x00000000 Write at address 0x00600018 (0xffff8bb26018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8c11000. Read at address 0x00600018 (0xffffb8c11018): 0x00000000 Write at address 0x00600018 (0xffffb8c11018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad7fe000. Read at address 0x00600018 (0xffffad7fe018): 0x00000000 Write at address 0x00600018 (0xffffad7fe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8c71c000. Read at address 0x00600018 (0xffff8c71c018): 0x00000000 Write at address 0x00600018 (0xffff8c71c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff811dc000. Read at address 0x00600018 (0xffff811dc018): 0x00000000 Write at address 0x00600018 (0xffff811dc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe771000. Read at address 0x00600018 (0xffffbe771018): 0x00000000 Write at address 0x00600018 (0xffffbe771018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e637000. Read at address 0x00600018 (0xffff8e637018): 0x00000000 Write at address 0x00600018 (0xffff8e637018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff832ae000. Read at address 0x00600018 (0xffff832ae018): 0x00000000 Write at address 0x00600018 (0xffff832ae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83e06000. Read at address 0x00600018 (0xffff83e06018): 0x00000000 Write at address 0x00600018 (0xffff83e06018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86dac000. Read at address 0x00600018 (0xffff86dac018): 0x00000000 Write at address 0x00600018 (0xffff86dac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbc1e2000. Read at address 0x00600018 (0xffffbc1e2018): 0x00000000 Write at address 0x00600018 (0xffffbc1e2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6e53000. Read at address 0x00600018 (0xffffa6e53018): 0x00000000 Write at address 0x00600018 (0xffffa6e53018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff92c32000. Read at address 0x00600018 (0xffff92c32018): 0x00000000 Write at address 0x00600018 (0xffff92c32018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe69f000. Read at address 0x00600018 (0xffffbe69f018): 0x00000000 Write at address 0x00600018 (0xffffbe69f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88d70000. Read at address 0x00600018 (0xffff88d70018): 0x00000000 Write at address 0x00600018 (0xffff88d70018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3eb1000. Read at address 0x00600018 (0xffffa3eb1018): 0x00000000 Write at address 0x00600018 (0xffffa3eb1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0a87000. Read at address 0x00600018 (0xffffb0a87018): 0x00000000 Write at address 0x00600018 (0xffffb0a87018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa744000. Read at address 0x00600018 (0xffffaa744018): 0x00000000 Write at address 0x00600018 (0xffffaa744018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8e19000. Read at address 0x00600018 (0xffffa8e19018): 0x00000000 Write at address 0x00600018 (0xffffa8e19018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: Waiting data available... done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8cd9b000. Read at address 0x00600018 (0xffff8cd9b018): 0x00000000 Write at address 0x00600018 (0xffff8cd9b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa95e4000. Read at address 0x00600018 (0xffffa95e4018): 0x00000000 Write at address 0x00600018 (0xffffa95e4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9041b000. Read at address 0x00600018 (0xffff9041b018): 0x00000000 Write at address 0x00600018 (0xffff9041b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8eec7000. Read at address 0x00600018 (0xffff8eec7018): 0x00000000 Write at address 0x00600018 (0xffff8eec7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0202000. Read at address 0x00600018 (0xffffa0202018): 0x00000000 Write at address 0x00600018 (0xffffa0202018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbf29d000. Read at address 0x00600018 (0xffffbf29d018): 0x00000000 Write at address 0x00600018 (0xffffbf29d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbdd6d000. Read at address 0x00600018 (0xffffbdd6d018): 0x00000000 Write at address 0x00600018 (0xffffbdd6d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Waiting data available... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8bf35000. Read at address 0x00600018 (0xffff8bf35018): 0x00000000 Write at address 0x00600018 (0xffff8bf35018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff988ad000. Read at address 0x00600018 (0xffff988ad018): 0x00000000 Write at address 0x00600018 (0xffff988ad018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87e79000. Read at address 0x00600018 (0xffff87e79018): 0x00000000 Write at address 0x00600018 (0xffff87e79018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0599000. Read at address 0x00600018 (0xffffa0599018): 0x00000000 Write at address 0x00600018 (0xffffa0599018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8a261000. Read at address 0x00600018 (0xffff8a261018): 0x00000000 Write at address 0x00600018 (0xffff8a261018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb2f40000. Read at address 0x00600018 (0xffffb2f40018): 0x00000000 Write at address 0x00600018 (0xffffb2f40018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb3f7000. Read at address 0x00600018 (0xffffbb3f7018): 0x00000000 Write at address 0x00600018 (0xffffbb3f7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9057f000. Read at address 0x00600018 (0xffff9057f018): 0x00000000 Write at address 0x00600018 (0xffff9057f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa58a6000. Read at address 0x00600018 (0xffffa58a6018): 0x00000000 Write at address 0x00600018 (0xffffa58a6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa1c68000. Read at address 0x00600018 (0xffffa1c68018): 0x00000000 Write at address 0x00600018 (0xffffa1c68018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa4b63000. Read at address 0x00600018 (0xffffa4b63018): 0x00000000 Write at address 0x00600018 (0xffffa4b63018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb2af000. Read at address 0x00600018 (0xffffbb2af018): 0x00000000 Write at address 0x00600018 (0xffffbb2af018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99fb1000. Read at address 0x00600018 (0xffff99fb1018): 0x00000000 Write at address 0x00600018 (0xffff99fb1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb744d000. Read at address 0x00600018 (0xffffb744d018): 0x00000000 Write at address 0x00600018 (0xffffb744d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8102c000. Read at address 0x00600018 (0xffff8102c018): 0x00000000 Write at address 0x00600018 (0xffff8102c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8fe68000. Read at address 0x00600018 (0xffff8fe68018): 0x00000000 Write at address 0x00600018 (0xffff8fe68018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5271000. Read at address 0x00600018 (0xffffb5271018): 0x00000000 Write at address 0x00600018 (0xffffb5271018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9967f000. Read at address 0x00600018 (0xffff9967f018): 0x00000000 Write at address 0x00600018 (0xffff9967f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffac4dd000. Read at address 0x00600018 (0xffffac4dd018): 0x00000000 Write at address 0x00600018 (0xffffac4dd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf234000. Read at address 0x00600018 (0xffffaf234018): 0x00000000 Write at address 0x00600018 (0xffffaf234018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff88f36000. Read at address 0x00600018 (0xffff88f36018): 0x00000000 Write at address 0x00600018 (0xffff88f36018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff940fb000. Read at address 0x00600018 (0xffff940fb018): 0x00000000 Write at address 0x00600018 (0xffff940fb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff849b1000. Read at address 0x00600018 (0xffff849b1018): 0x00000000 Write at address 0x00600018 (0xffff849b1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa07c1000. Read at address 0x00600018 (0xffffa07c1018): 0x00000000 Write at address 0x00600018 (0xffffa07c1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9fbf4000. Read at address 0x00600018 (0xffff9fbf4018): 0x00000000 Write at address 0x00600018 (0xffff9fbf4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa64ed000. Read at address 0x00600018 (0xffffa64ed018): 0x00000000 Write at address 0x00600018 (0xffffa64ed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9da58000. Read at address 0x00600018 (0xffff9da58018): 0x00000000 Write at address 0x00600018 (0xffff9da58018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e188000. Read at address 0x00600018 (0xffff8e188018): 0x00000000 Write at address 0x00600018 (0xffff8e188018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94763000. Read at address 0x00600018 (0xffff94763018): 0x00000000 Write at address 0x00600018 (0xffff94763018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Waiting data available... Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff93b82000. Read at address 0x00600018 (0xffff93b82018): 0x00000000 Write at address 0x00600018 (0xffff93b82018): 0x00400040, readback 0x00400040 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81d5a000. Read at address 0x00600018 (0xffff81d5a018): 0x00000000 Write at address 0x00600018 (0xffff81d5a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8ed3a000. Read at address 0x00600018 (0xffff8ed3a018): 0x00000000 Write at address 0x00600018 (0xffff8ed3a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac2f4000. Read at address 0x00600018 (0xffffac2f4018): 0x00000000 Write at address 0x00600018 (0xffffac2f4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a31e000. Read at address 0x00600018 (0xffff9a31e018): 0x00000000 Write at address 0x00600018 (0xffff9a31e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba2ab000. Read at address 0x00600018 (0xffffba2ab018): 0x00000000 Write at address 0x00600018 (0xffffba2ab018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7ff72000. Read at address 0x00600018 (0xffff7ff72018): 0x00000000 Write at address 0x00600018 (0xffff7ff72018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists mtd32 attached net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff83d98000. Read at address 0x00600018 (0xffff83d98018): 0x00000000 Write at address 0x00600018 (0xffff83d98018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffba90d000. Read at address 0x00600018 (0xffffba90d018): 0x00000000 Write at address 0x00600018 (0xffffba90d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4aef000. Read at address 0x00600018 (0xffffb4aef018): 0x00000000 Write at address 0x00600018 (0xffffb4aef018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82883000. Read at address 0x00600018 (0xffff82883018): 0x00000000 Write at address 0x00600018 (0xffff82883018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa3c14000. Read at address 0x00600018 (0xffffa3c14018): 0x00000000 Write at address 0x00600018 (0xffffa3c14018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e483000. Read at address 0x00600018 (0xffff8e483018): 0x00000000 Write at address 0x00600018 (0xffff8e483018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb602e000. Read at address 0x00600018 (0xffffb602e018): 0x00000000 Write at address 0x00600018 (0xffffb602e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Memory mapped at address 0xffffa6a81000. Read at address 0x00600018 (0xffffa6a81018): 0x00000000 Write at address 0x00600018 (0xffffa6a81018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8e76c000. Read at address 0x00600018 (0xffff8e76c018): 0x00000000 Write at address 0x00600018 (0xffff8e76c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa56ba000. Read at address 0x00600018 (0xffffa56ba018): 0x00000000 Write at address 0x00600018 (0xffffa56ba018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff84f01000. Read at address 0x00600018 (0xffff84f01018): 0x00000000 Write at address 0x00600018 (0xffff84f01018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff88068000. Read at address 0x00600018 (0xffff88068018): 0x00000000 Write at address 0x00600018 (0xffff88068018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa21c4000. Read at address 0x00600018 (0xffffa21c4018): 0x00000000 Write at address 0x00600018 (0xffffa21c4018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbcede000. Read at address 0x00600018 (0xffffbcede018): 0x00000000 Write at address 0x00600018 (0xffffbcede018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa169b000. Read at address 0x00600018 (0xffffa169b018): 0x00000000 Write at address 0x00600018 (0xffffa169b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9061a000. Read at address 0x00600018 (0xffff9061a018): 0x00000000 Write at address 0x00600018 (0xffff9061a018): 0x00400040, readback 0x00400040 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5bff000. Read at address 0x00600018 (0xffffb5bff018): 0x00000000 Write at address 0x00600018 (0xffffb5bff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8affd000. Read at address 0x00600018 (0xffff8affd018): 0x00000000 Write at address 0x00600018 (0xffff8affd018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff80100000. Read at address 0x00600018 (0xffff80100018): 0x00000000 Write at address 0x00600018 (0xffff80100018): 0x00400040, readback 0x00400040 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb25a7000. Read at address 0x00600018 (0xffffb25a7018): 0x00000000 Write at address 0x00600018 (0xffffb25a7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa684a000. Read at address 0x00600018 (0xffffa684a018): 0x00000000 Write at address 0x00600018 (0xffffa684a018): 0x00400040, readback 0x00400040 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: Waiting data available... done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98af5000. Read at address 0x00600018 (0xffff98af5018): 0x00000000 Write at address 0x00600018 (0xffff98af5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff84dd4000. Read at address 0x00600018 (0xffff84dd4018): 0x00000000 Write at address 0x00600018 (0xffff84dd4018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb2498000. Read at address 0x00600018 (0xffffb2498018): 0x00000000 Write at address 0x00600018 (0xffffb2498018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa427000. Read at address 0x00600018 (0xffffaa427018): 0x00000000 Write at address 0x00600018 (0xffffaa427018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb31f6000. Read at address 0x00600018 (0xffffb31f6018): 0x00000000 Write at address 0x00600018 (0xffffb31f6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff98981000. Read at address 0x00600018 (0xffff98981018): 0x00000000 Write at address 0x00600018 (0xffff98981018): 0x00400040, readback 0x00400040 Bsw_Wrapper_Status_isReady Waiting data available... Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8238000. Read at address 0x00600018 (0xffffb8238018): 0x00000000 Write at address 0x00600018 (0xffffb8238018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92a4d000. Read at address 0x00600018 (0xffff92a4d018): 0x00000000 Write at address 0x00600018 (0xffff92a4d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85fef000. Read at address 0x00600018 (0xffff85fef018): 0x00000000 Write at address 0x00600018 (0xffff85fef018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff88154000. Read at address 0x00600018 (0xffff88154018): 0x00000000 Write at address 0x00600018 (0xffff88154018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8770b000. Read at address 0x00600018 (0xffff8770b018): 0x00000000 Write at address 0x00600018 (0xffff8770b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82733000. Read at address 0x00600018 (0xffff82733018): 0x00000000 Write at address 0x00600018 (0xffff82733018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb88e7000. Read at address 0x00600018 (0xffffb88e7018): 0x00000000 Write at address 0x00600018 (0xffffb88e7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafa53000. Read at address 0x00600018 (0xffffafa53018): 0x00000000 Write at address 0x00600018 (0xffffafa53018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6227000. Read at address 0x00600018 (0xffffa6227018): 0x00000000 Write at address 0x00600018 (0xffffa6227018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb1b9d000. Read at address 0x00600018 (0xffffb1b9d018): 0x00000000 Write at address 0x00600018 (0xffffb1b9d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbc76000. Read at address 0x00600018 (0xffffbbc76018): 0x00000000 Write at address 0x00600018 (0xffffbbc76018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81be5000. Read at address 0x00600018 (0xffff81be5018): 0x00000000 Write at address 0x00600018 (0xffff81be5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8f461000. Read at address 0x00600018 (0xffff8f461018): 0x00000000 Write at address 0x00600018 (0xffff8f461018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa8bfb000. Read at address 0x00600018 (0xffffa8bfb018): 0x00000000 Write at address 0x00600018 (0xffffa8bfb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff94301000. Read at address 0x00600018 (0xffff94301018): 0x00000000 Write at address 0x00600018 (0xffff94301018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbcdc000. Read at address 0x00600018 (0xffffbbcdc018): 0x00000000 Write at address 0x00600018 (0xffffbbcdc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbcf2f000. Read at address 0x00600018 (0xffffbcf2f018): 0x00000000 Write at address 0x00600018 (0xffffbcf2f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 net.ipv6.conf.all.disable_ipv6 = 0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9fb3000. Read at address 0x00600018 (0xffffa9fb3018): 0x00000000 Write at address 0x00600018 (0xffffa9fb3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b9fa000. Read at address 0x00600018 (0xffff8b9fa018): 0x00000000 Write at address 0x00600018 (0xffff8b9fa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb28eb000. Read at address 0x00600018 (0xffffb28eb018): 0x00000000 Write at address 0x00600018 (0xffffb28eb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6c75000. Read at address 0x00600018 (0xffffa6c75018): 0x00000000 Write at address 0x00600018 (0xffffa6c75018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff89f29000. Read at address 0x00600018 (0xffff89f29018): 0x00000000 Write at address 0x00600018 (0xffff89f29018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff820d8000. Read at address 0x00600018 (0xffff820d8018): 0x00000000 Write at address 0x00600018 (0xffff820d8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb94d2000. Read at address 0x00600018 (0xffffb94d2018): 0x00000000 Write at address 0x00600018 (0xffffb94d2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85e25000. Read at address 0x00600018 (0xffff85e25018): 0x00000000 Write at address 0x00600018 (0xffff85e25018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b288000. Read at address 0x00600018 (0xffff9b288018): 0x00000000 Write at address 0x00600018 (0xffff9b288018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff843b6000. Read at address 0x00600018 (0xffff843b6018): 0x00000000 Write at address 0x00600018 (0xffff843b6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb523000. Read at address 0x00600018 (0xffffbb523018): 0x00000000 Write at address 0x00600018 (0xffffbb523018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9728c000. Read at address 0x00600018 (0xffff9728c018): 0x00000000 Write at address 0x00600018 (0xffff9728c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffac8c9000. Read at address 0x00600018 (0xffffac8c9018): 0x00000000 Write at address 0x00600018 (0xffffac8c9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbeb19000. Read at address 0x00600018 (0xffffbeb19018): 0x00000000 Write at address 0x00600018 (0xffffbeb19018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8d17c000. Read at address 0x00600018 (0xffff8d17c018): 0x00000000 Write at address 0x00600018 (0xffff8d17c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb36f2000. Read at address 0x00600018 (0xffffb36f2018): 0x00000000 Write at address 0x00600018 (0xffffb36f2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91ce2000. Read at address 0x00600018 (0xffff91ce2018): 0x00000000 Write at address 0x00600018 (0xffff91ce2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba730000. Read at address 0x00600018 (0xffffba730018): 0x00000000 Write at address 0x00600018 (0xffffba730018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff96cb4000. Read at address 0x00600018 (0xffff96cb4018): 0x00000000 Write at address 0x00600018 (0xffff96cb4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb4a24000. Read at address 0x00600018 (0xffffb4a24018): 0x00000000 Write at address 0x00600018 (0xffffb4a24018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff913a4000. Read at address 0x00600018 (0xffff913a4018): 0x00000000 Write at address 0x00600018 (0xffff913a4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 220 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9095e000. Read at address 0x00600018 (0xffff9095e018): 0x00000000 Write at address 0x00600018 (0xffff9095e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 ubi2:dml_code is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb1882000. Read at address 0x00600018 (0xffffb1882018): 0x00000000 Write at address 0x00600018 (0xffffb1882018): 0x00400040, readback 0x00400040 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa86a1000. Read at address 0x00600018 (0xffffa86a1018): 0x00000000 Write at address 0x00600018 (0xffffa86a1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9de34000. Read at address 0x00600018 (0xffff9de34018): 0x00000000 Write at address 0x00600018 (0xffff9de34018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb291f000. Read at address 0x00600018 (0xffffb291f018): 0x00000000 Write at address 0x00600018 (0xffffb291f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff88c93000. Read at address 0x00600018 (0xffff88c93018): 0x00000000 Write at address 0x00600018 (0xffff88c93018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85c74000. Read at address 0x00600018 (0xffff85c74018): 0x00000000 Write at address 0x00600018 (0xffff85c74018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb40bc000. Read at address 0x00600018 (0xffffb40bc018): 0x00000000 Write at address 0x00600018 (0xffffb40bc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff819df000. Read at address 0x00600018 (0xffff819df018): 0x00000000 Write at address 0x00600018 (0xffff819df018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9daed000. Read at address 0x00600018 (0xffff9daed018): 0x00000000 Write at address 0x00600018 (0xffff9daed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb05c9000. Read at address 0x00600018 (0xffffb05c9018): 0x00000000 Write at address 0x00600018 (0xffffb05c9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff849b5000. Read at address 0x00600018 (0xffff849b5018): 0x00000000 Write at address 0x00600018 (0xffff849b5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9f1ea000. Read at address 0x00600018 (0xffff9f1ea018): 0x00000000 Write at address 0x00600018 (0xffff9f1ea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f876000. Read at address 0x00600018 (0xffff8f876018): 0x00000000 Write at address 0x00600018 (0xffff8f876018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff84ca3000. Read at address 0x00600018 (0xffff84ca3018): 0x00000000 Write at address 0x00600018 (0xffff84ca3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb71f6000. Read at address 0x00600018 (0xffffb71f6018): 0x00000000 Write at address 0x00600018 (0xffffb71f6018): 0x00400040, readback 0x00400040 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9aefc000. Read at address 0x00600018 (0xffff9aefc018): 0x00000000 Write at address 0x00600018 (0xffff9aefc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa510c000. Read at address 0x00600018 (0xffffa510c018): 0x00000000 Write at address 0x00600018 (0xffffa510c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ef5b000. Read at address 0x00600018 (0xffff9ef5b018): 0x00000000 Write at address 0x00600018 (0xffff9ef5b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d1d4000. Read at address 0x00600018 (0xffff9d1d4018): 0x00000000 Write at address 0x00600018 (0xffff9d1d4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba86b000. Read at address 0x00600018 (0xffffba86b018): 0x00000000 Write at address 0x00600018 (0xffffba86b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb87f2000. Read at address 0x00600018 (0xffffb87f2018): 0x00000000 Write at address 0x00600018 (0xffffb87f2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffac43c000. Read at address 0x00600018 (0xffffac43c018): 0x00000000 Write at address 0x00600018 (0xffffac43c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa67f1000. Read at address 0x00600018 (0xffffa67f1018): 0x00000000 Write at address 0x00600018 (0xffffa67f1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb8e62000. Read at address 0x00600018 (0xffffb8e62018): 0x00000000 Write at address 0x00600018 (0xffffb8e62018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84776000. Read at address 0x00600018 (0xffff84776018): 0x00000000 Write at address 0x00600018 (0xffff84776018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Waiting data available... Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb36cb000. Read at address 0x00600018 (0xffffb36cb018): 0x00000000 Write at address 0x00600018 (0xffffb36cb018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa40ff000. Read at address 0x00600018 (0xffffa40ff018): 0x00000000 Write at address 0x00600018 (0xffffa40ff018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e4f4000. Read at address 0x00600018 (0xffff8e4f4018): 0x00000000 Write at address 0x00600018 (0xffff8e4f4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff91183000. Read at address 0x00600018 (0xffff91183018): 0x00000000 Write at address 0x00600018 (0xffff91183018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa7604000. Read at address 0x00600018 (0xffffa7604018): 0x00000000 Write at address 0x00600018 (0xffffa7604018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff878e1000. Read at address 0x00600018 (0xffff878e1018): 0x00000000 Write at address 0x00600018 (0xffff878e1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa71f0000. Read at address 0x00600018 (0xffffa71f0018): 0x00000000 Write at address 0x00600018 (0xffffa71f0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffac41a000. Read at address 0x00600018 (0xffffac41a018): 0x00000000 Write at address 0x00600018 (0xffffac41a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff85b84000. Read at address 0x00600018 (0xffff85b84018): 0x00000000 Write at address 0x00600018 (0xffff85b84018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa1943000. Read at address 0x00600018 (0xffffa1943018): 0x00000000 Write at address 0x00600018 (0xffffa1943018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7e36000. Read at address 0x00600018 (0xffffb7e36018): 0x00000000 Write at address 0x00600018 (0xffffb7e36018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c47c000. Read at address 0x00600018 (0xffff9c47c018): 0x00000000 Write at address 0x00600018 (0xffff9c47c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6e48000. Read at address 0x00600018 (0xffffa6e48018): 0x00000000 Write at address 0x00600018 (0xffffa6e48018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa9eff000. Read at address 0x00600018 (0xffffa9eff018): 0x00000000 Write at address 0x00600018 (0xffffa9eff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89076000. Read at address 0x00600018 (0xffff89076018): 0x00000000 Write at address 0x00600018 (0xffff89076018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0697000. Read at address 0x00600018 (0xffffb0697018): 0x00000000 Write at address 0x00600018 (0xffffb0697018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff872bb000. Read at address 0x00600018 (0xffff872bb018): 0x00000000 Write at address 0x00600018 (0xffff872bb018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff918ac000. Read at address 0x00600018 (0xffff918ac018): 0x00000000 Write at address 0x00600018 (0xffff918ac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff944a8000. Read at address 0x00600018 (0xffff944a8018): 0x00000000 Write at address 0x00600018 (0xffff944a8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb73df000. Read at address 0x00600018 (0xffffb73df018): 0x00000000 Write at address 0x00600018 (0xffffb73df018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb3862000. Read at address 0x00600018 (0xffffb3862018): 0x00000000 Write at address 0x00600018 (0xffffb3862018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff836a4000. Read at address 0x00600018 (0xffff836a4018): 0x00000000 Write at address 0x00600018 (0xffff836a4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad600000. Read at address 0x00600018 (0xffffad600018): 0x00000000 Write at address 0x00600018 (0xffffad600018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81890000. Read at address 0x00600018 (0xffff81890018): 0x00000000 Write at address 0x00600018 (0xffff81890018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ad10000. Read at address 0x00600018 (0xffff9ad10018): 0x00000000 Write at address 0x00600018 (0xffff9ad10018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa59de000. Read at address 0x00600018 (0xffffa59de018): 0x00000000 Write at address 0x00600018 (0xffffa59de018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff834a9000. Read at address 0x00600018 (0xffff834a9018): 0x00000000 Write at address 0x00600018 (0xffff834a9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8181000. Read at address 0x00600018 (0xffffb8181018): 0x00000000 Write at address 0x00600018 (0xffffb8181018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff89f85000. Read at address 0x00600018 (0xffff89f85018): 0x00000000 Write at address 0x00600018 (0xffff89f85018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffafeea000. Read at address 0x00600018 (0xffffafeea018): 0x00000000 Write at address 0x00600018 (0xffffafeea018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1fdb000. Read at address 0x00600018 (0xffffa1fdb018): 0x00000000 Write at address 0x00600018 (0xffffa1fdb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff895d5000. Read at address 0x00600018 (0xffff895d5018): 0x00000000 Write at address 0x00600018 (0xffff895d5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92fbe000. Read at address 0x00600018 (0xffff92fbe018): 0x00000000 Write at address 0x00600018 (0xffff92fbe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94aba000. Read at address 0x00600018 (0xffff94aba018): 0x00000000 Write at address 0x00600018 (0xffff94aba018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91de8000. Read at address 0x00600018 (0xffff91de8018): 0x00000000 Write at address 0x00600018 (0xffff91de8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaedc4000. Read at address 0x00600018 (0xffffaedc4018): 0x00000000 Write at address 0x00600018 (0xffffaedc4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82577000. Read at address 0x00600018 (0xffff82577018): 0x00000000 Write at address 0x00600018 (0xffff82577018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90cc2000. Read at address 0x00600018 (0xffff90cc2018): 0x00000000 Write at address 0x00600018 (0xffff90cc2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ab62000. Read at address 0x00600018 (0xffff8ab62018): 0x00000000 Write at address 0x00600018 (0xffff8ab62018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83f43000. Read at address 0x00600018 (0xffff83f43018): 0x00000000 Write at address 0x00600018 (0xffff83f43018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Waiting data available... Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8bee6000. Read at address 0x00600018 (0xffff8bee6018): 0x00000000 Write at address 0x00600018 (0xffff8bee6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9fa33000. Read at address 0x00600018 (0xffff9fa33018): 0x00000000 Write at address 0x00600018 (0xffff9fa33018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d1e8000. Read at address 0x00600018 (0xffff9d1e8018): 0x00000000 Write at address 0x00600018 (0xffff9d1e8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbcca0000. Read at address 0x00600018 (0xffffbcca0018): 0x00000000 Write at address 0x00600018 (0xffffbcca0018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa364b000. Read at address 0x00600018 (0xffffa364b018): 0x00000000 Write at address 0x00600018 (0xffffa364b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82d61000. Read at address 0x00600018 (0xffff82d61018): 0x00000000 Write at address 0x00600018 (0xffff82d61018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb23cb000. Read at address 0x00600018 (0xffffb23cb018): 0x00000000 Write at address 0x00600018 (0xffffb23cb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 220 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff96989000. Read at address 0x00600018 (0xffff96989018): 0x00000000 Write at address 0x00600018 (0xffff96989018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff820c8000. Read at address 0x00600018 (0xffff820c8018): 0x00000000 Write at address 0x00600018 (0xffff820c8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f242000. Read at address 0x00600018 (0xffff8f242018): 0x00000000 Write at address 0x00600018 (0xffff8f242018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbb8af000. Read at address 0x00600018 (0xffffbb8af018): 0x00000000 Write at address 0x00600018 (0xffffbb8af018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb87da000. Read at address 0x00600018 (0xffffb87da018): 0x00000000 Write at address 0x00600018 (0xffffb87da018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa41ce000. Read at address 0x00600018 (0xffffa41ce018): 0x00000000 Write at address 0x00600018 (0xffffa41ce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1dbd000. Read at address 0x00600018 (0xffffa1dbd018): 0x00000000 Write at address 0x00600018 (0xffffa1dbd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Waiting data available... Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9787c000. Read at address 0x00600018 (0xffff9787c018): 0x00000000 Write at address 0x00600018 (0xffff9787c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f9d6000. Read at address 0x00600018 (0xffff8f9d6018): 0x00000000 Write at address 0x00600018 (0xffff8f9d6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fbd5000. Read at address 0x00600018 (0xffff7fbd5018): 0x00000000 Write at address 0x00600018 (0xffff7fbd5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffadecf000. Read at address 0x00600018 (0xffffadecf018): 0x00000000 Write at address 0x00600018 (0xffffadecf018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8088e000. Read at address 0x00600018 (0xffff8088e018): 0x00000000 Write at address 0x00600018 (0xffff8088e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1100000. Read at address 0x00600018 (0xffffa1100018): 0x00000000 Write at address 0x00600018 (0xffffa1100018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaeb68000. Read at address 0x00600018 (0xffffaeb68018): 0x00000000 Write at address 0x00600018 (0xffffaeb68018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5921000. Read at address 0x00600018 (0xffffa5921018): 0x00000000 Write at address 0x00600018 (0xffffa5921018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff933e4000. Read at address 0x00600018 (0xffff933e4018): 0x00000000 Write at address 0x00600018 (0xffff933e4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb730a000. Read at address 0x00600018 (0xffffb730a018): 0x00000000 Write at address 0x00600018 (0xffffb730a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa0c69000. Read at address 0x00600018 (0xffffa0c69018): 0x00000000 Write at address 0x00600018 (0xffffa0c69018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92921000. Read at address 0x00600018 (0xffff92921018): 0x00000000 Write at address 0x00600018 (0xffff92921018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1abd000. Read at address 0x00600018 (0xffffb1abd018): 0x00000000 Write at address 0x00600018 (0xffffb1abd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb62df000. Read at address 0x00600018 (0xffffb62df018): 0x00000000 Write at address 0x00600018 (0xffffb62df018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff804f3000. Read at address 0x00600018 (0xffff804f3018): 0x00000000 Write at address 0x00600018 (0xffff804f3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8d7e5000. Read at address 0x00600018 (0xffff8d7e5018): 0x00000000 Write at address 0x00600018 (0xffff8d7e5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff872b8000. Read at address 0x00600018 (0xffff872b8018): 0x00000000 Write at address 0x00600018 (0xffff872b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa66ea000. Read at address 0x00600018 (0xffffa66ea018): 0x00000000 Write at address 0x00600018 (0xffffa66ea018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7695000. Read at address 0x00600018 (0xffffa7695018): 0x00000000 Write at address 0x00600018 (0xffffa7695018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95acc000. Read at address 0x00600018 (0xffff95acc018): 0x00000000 Write at address 0x00600018 (0xffff95acc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff981b6000. Read at address 0x00600018 (0xffff981b6018): 0x00000000 Write at address 0x00600018 (0xffff981b6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff96606000. Read at address 0x00600018 (0xffff96606018): 0x00000000 Write at address 0x00600018 (0xffff96606018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ec78000. Read at address 0x00600018 (0xffff8ec78018): 0x00000000 Write at address 0x00600018 (0xffff8ec78018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbdc8e000. Read at address 0x00600018 (0xffffbdc8e018): 0x00000000 Write at address 0x00600018 (0xffffbdc8e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa622b000. Read at address 0x00600018 (0xffffa622b018): 0x00000000 Write at address 0x00600018 (0xffffa622b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82a50000. Read at address 0x00600018 (0xffff82a50018): 0x00000000 Write at address 0x00600018 (0xffff82a50018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9478e000. Read at address 0x00600018 (0xffff9478e018): 0x00000000 Write at address 0x00600018 (0xffff9478e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 net.ipv6.conf.eth0.dad_transmits = 0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa51ac000. Read at address 0x00600018 (0xffffa51ac018): 0x00000000 Write at address 0x00600018 (0xffffa51ac018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbd5aa000. Read at address 0x00600018 (0xffffbd5aa018): 0x00000000 Write at address 0x00600018 (0xffffbd5aa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9681000. Read at address 0x00600018 (0xffffa9681018): 0x00000000 Write at address 0x00600018 (0xffffa9681018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb40b4000. Read at address 0x00600018 (0xffffb40b4018): 0x00000000 Write at address 0x00600018 (0xffffb40b4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8db7c000. Read at address 0x00600018 (0xffff8db7c018): 0x00000000 Write at address 0x00600018 (0xffff8db7c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3d78000. Read at address 0x00600018 (0xffffa3d78018): 0x00000000 Write at address 0x00600018 (0xffffa3d78018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff83204000. Read at address 0x00600018 (0xffff83204018): 0x00000000 Write at address 0x00600018 (0xffff83204018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Waiting data available... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97dbf000. Read at address 0x00600018 (0xffff97dbf018): 0x00000000 Write at address 0x00600018 (0xffff97dbf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95054000. Read at address 0x00600018 (0xffff95054018): 0x00000000 Write at address 0x00600018 (0xffff95054018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7bc4000. Read at address 0x00600018 (0xffffb7bc4018): 0x00000000 Write at address 0x00600018 (0xffffb7bc4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4585000. Read at address 0x00600018 (0xffffa4585018): 0x00000000 Write at address 0x00600018 (0xffffa4585018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Waiting data available... Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81256000. Read at address 0x00600018 (0xffff81256018): 0x00000000 Write at address 0x00600018 (0xffff81256018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff92e9a000. Read at address 0x00600018 (0xffff92e9a018): 0x00000000 Write at address 0x00600018 (0xffff92e9a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9165e000. Read at address 0x00600018 (0xffff9165e018): 0x00000000 Write at address 0x00600018 (0xffff9165e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff917e9000. Read at address 0x00600018 (0xffff917e9018): 0x00000000 Write at address 0x00600018 (0xffff917e9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff904e5000. Read at address 0x00600018 (0xffff904e5018): 0x00000000 Write at address 0x00600018 (0xffff904e5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8ddbb000. Read at address 0x00600018 (0xffff8ddbb018): 0x00000000 Write at address 0x00600018 (0xffff8ddbb018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff993b8000. Read at address 0x00600018 (0xffff993b8018): 0x00000000 Write at address 0x00600018 (0xffff993b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Waiting data available... Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff824c7000. Read at address 0x00600018 (0xffff824c7018): 0x00000000 Write at address 0x00600018 (0xffff824c7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab438000. Read at address 0x00600018 (0xffffab438018): 0x00000000 Write at address 0x00600018 (0xffffab438018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81511000. Read at address 0x00600018 (0xffff81511018): 0x00000000 Write at address 0x00600018 (0xffff81511018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa3f85000. Read at address 0x00600018 (0xffffa3f85018): 0x00000000 Write at address 0x00600018 (0xffffa3f85018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb632f000. Read at address 0x00600018 (0xffffb632f018): 0x00000000 Write at address 0x00600018 (0xffffb632f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8de63000. Read at address 0x00600018 (0xffff8de63018): 0x00000000 Write at address 0x00600018 (0xffff8de63018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90fb0000. Read at address 0x00600018 (0xffff90fb0018): 0x00000000 Write at address 0x00600018 (0xffff90fb0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff88493000. Read at address 0x00600018 (0xffff88493018): 0x00000000 Write at address 0x00600018 (0xffff88493018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97ef2000. Read at address 0x00600018 (0xffff97ef2018): 0x00000000 Write at address 0x00600018 (0xffff97ef2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9df3e000. Read at address 0x00600018 (0xffff9df3e018): 0x00000000 Write at address 0x00600018 (0xffff9df3e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff980e6000. Read at address 0x00600018 (0xffff980e6018): 0x00000000 Write at address 0x00600018 (0xffff980e6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88a90000. Read at address 0x00600018 (0xffff88a90018): 0x00000000 Write at address 0x00600018 (0xffff88a90018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90732000. Read at address 0x00600018 (0xffff90732018): 0x00000000 Write at address 0x00600018 (0xffff90732018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff848d1000. Read at address 0x00600018 (0xffff848d1018): 0x00000000 Write at address 0x00600018 (0xffff848d1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c301000. Read at address 0x00600018 (0xffff8c301018): 0x00000000 Write at address 0x00600018 (0xffff8c301018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8093d000. Read at address 0x00600018 (0xffff8093d018): 0x00000000 Write at address 0x00600018 (0xffff8093d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff991a5000. Read at address 0x00600018 (0xffff991a5018): 0x00000000 Write at address 0x00600018 (0xffff991a5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa43af000. Read at address 0x00600018 (0xffffa43af018): 0x00000000 Write at address 0x00600018 (0xffffa43af018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc166000. Read at address 0x00600018 (0xffffbc166018): 0x00000000 Write at address 0x00600018 (0xffffbc166018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff90abd000. Read at address 0x00600018 (0xffff90abd018): 0x00000000 Write at address 0x00600018 (0xffff90abd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa838e000. Read at address 0x00600018 (0xffffa838e018): 0x00000000 Write at address 0x00600018 (0xffffa838e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf256000. Read at address 0x00600018 (0xffffaf256018): 0x00000000 Write at address 0x00600018 (0xffffaf256018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb06ad000. Read at address 0x00600018 (0xffffb06ad018): 0x00000000 Write at address 0x00600018 (0xffffb06ad018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffac824000. Read at address 0x00600018 (0xffffac824018): 0x00000000 Write at address 0x00600018 (0xffffac824018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 237 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbcde6000. Read at address 0x00600018 (0xffffbcde6018): 0x00000000 Write at address 0x00600018 (0xffffbcde6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fa15000. Read at address 0x00600018 (0xffff8fa15018): 0x00000000 Write at address 0x00600018 (0xffff8fa15018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8035000. Read at address 0x00600018 (0xffffb8035018): 0x00000000 Write at address 0x00600018 (0xffffb8035018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff955b5000. Read at address 0x00600018 (0xffff955b5018): 0x00000000 Write at address 0x00600018 (0xffff955b5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8d574000. Read at address 0x00600018 (0xffff8d574018): 0x00000000 Write at address 0x00600018 (0xffff8d574018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d83b000. Read at address 0x00600018 (0xffff9d83b018): 0x00000000 Write at address 0x00600018 (0xffff9d83b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89b4d000. Read at address 0x00600018 (0xffff89b4d018): 0x00000000 Write at address 0x00600018 (0xffff89b4d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88df8000. Read at address 0x00600018 (0xffff88df8018): 0x00000000 Write at address 0x00600018 (0xffff88df8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Waiting data available... Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8dca6000. Read at address 0x00600018 (0xffff8dca6018): 0x00000000 Write at address 0x00600018 (0xffff8dca6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf4f7000. Read at address 0x00600018 (0xffffbf4f7018): 0x00000000 Write at address 0x00600018 (0xffffbf4f7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0a46000. Read at address 0x00600018 (0xffffb0a46018): 0x00000000 Write at address 0x00600018 (0xffffb0a46018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 net.ipv6.conf.all.disable_ipv6 = 0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa5677000. Read at address 0x00600018 (0xffffa5677018): 0x00000000 Write at address 0x00600018 (0xffffa5677018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8e4f7000. Read at address 0x00600018 (0xffff8e4f7018): 0x00000000 Write at address 0x00600018 (0xffff8e4f7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffba3fc000. Read at address 0x00600018 (0xffffba3fc018): 0x00000000 Write at address 0x00600018 (0xffffba3fc018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff96783000. Read at address 0x00600018 (0xffff96783018): 0x00000000 Write at address 0x00600018 (0xffff96783018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae589000. Read at address 0x00600018 (0xffffae589018): 0x00000000 Write at address 0x00600018 (0xffffae589018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbe737000. Read at address 0x00600018 (0xffffbe737018): 0x00000000 Write at address 0x00600018 (0xffffbe737018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cec8000. Read at address 0x00600018 (0xffff9cec8018): 0x00000000 Write at address 0x00600018 (0xffff9cec8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b8c4000. Read at address 0x00600018 (0xffff9b8c4018): 0x00000000 Write at address 0x00600018 (0xffff9b8c4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81834000. Read at address 0x00600018 (0xffff81834018): 0x00000000 Write at address 0x00600018 (0xffff81834018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe84b000. Read at address 0x00600018 (0xffffbe84b018): 0x00000000 Write at address 0x00600018 (0xffffbe84b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff99fff000. Read at address 0x00600018 (0xffff99fff018): 0x00000000 Write at address 0x00600018 (0xffff99fff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c88e000. Read at address 0x00600018 (0xffff8c88e018): 0x00000000 Write at address 0x00600018 (0xffff8c88e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8997d000. Read at address 0x00600018 (0xffff8997d018): 0x00000000 Write at address 0x00600018 (0xffff8997d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa6d85000. Read at address 0x00600018 (0xffffa6d85018): 0x00000000 net.ipv6.conf.all.addr_gen_mode = 0 Write at address 0x00600018 (0xffffa6d85018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb8df2000. Read at address 0x00600018 (0xffffb8df2018): 0x00000000 Write at address 0x00600018 (0xffffb8df2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ff37000. Read at address 0x00600018 (0xffff8ff37018): 0x00000000 Write at address 0x00600018 (0xffff8ff37018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c307000. Read at address 0x00600018 (0xffff9c307018): 0x00000000 Write at address 0x00600018 (0xffff9c307018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80972000. Read at address 0x00600018 (0xffff80972018): 0x00000000 Write at address 0x00600018 (0xffff80972018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbe880000. Read at address 0x00600018 (0xffffbe880018): 0x00000000 Write at address 0x00600018 (0xffffbe880018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3246000. Read at address 0x00600018 (0xffffb3246018): 0x00000000 Write at address 0x00600018 (0xffffb3246018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab86b000. Read at address 0x00600018 (0xffffab86b018): 0x00000000 Write at address 0x00600018 (0xffffab86b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f221000. Read at address 0x00600018 (0xffff9f221018): 0x00000000 Write at address 0x00600018 (0xffff9f221018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaca62000. Read at address 0x00600018 (0xffffaca62018): 0x00000000 Write at address 0x00600018 (0xffffaca62018): 0x00400040, readback 0x00400040 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96edd000. Read at address 0x00600018 (0xffff96edd018): 0x00000000 Write at address 0x00600018 (0xffff96edd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb39a2000. Read at address 0x00600018 (0xffffb39a2018): 0x00000000 Write at address 0x00600018 (0xffffb39a2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93a5c000. Read at address 0x00600018 (0xffff93a5c018): 0x00000000 Write at address 0x00600018 (0xffff93a5c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d063000. Read at address 0x00600018 (0xffff8d063018): 0x00000000 Write at address 0x00600018 (0xffff8d063018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa1b31000. Read at address 0x00600018 (0xffffa1b31018): 0x00000000 Write at address 0x00600018 (0xffffa1b31018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96a28000. Read at address 0x00600018 (0xffff96a28018): 0x00000000 Write at address 0x00600018 (0xffff96a28018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6b5c000. Read at address 0x00600018 (0xffffb6b5c018): 0x00000000 Write at address 0x00600018 (0xffffb6b5c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b9d0000. Read at address 0x00600018 (0xffff9b9d0018): 0x00000000 Write at address 0x00600018 (0xffff9b9d0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb797f000. Read at address 0x00600018 (0xffffb797f018): 0x00000000 Write at address 0x00600018 (0xffffb797f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c0d0000. Read at address 0x00600018 (0xffff8c0d0018): 0x00000000 Write at address 0x00600018 (0xffff8c0d0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9d6c5000. Read at address 0x00600018 (0xffff9d6c5018): 0x00000000 Write at address 0x00600018 (0xffff9d6c5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8770d000. Read at address 0x00600018 (0xffff8770d018): 0x00000000 Write at address 0x00600018 (0xffff8770d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa362b000. Read at address 0x00600018 (0xffffa362b018): 0x00000000 Write at address 0x00600018 (0xffffa362b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff94489000. Read at address 0x00600018 (0xffff94489018): 0x00000000 Write at address 0x00600018 (0xffff94489018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaca1d000. Read at address 0x00600018 (0xffffaca1d018): 0x00000000 Write at address 0x00600018 (0xffffaca1d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa814c000. Read at address 0x00600018 (0xffffa814c018): 0x00000000 Write at address 0x00600018 (0xffffa814c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbef41000. Read at address 0x00600018 (0xffffbef41018): 0x00000000 Write at address 0x00600018 (0xffffbef41018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbd309000. Read at address 0x00600018 (0xffffbd309018): 0x00000000 Write at address 0x00600018 (0xffffbd309018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbcb13000. Read at address 0x00600018 (0xffffbcb13018): 0x00000000 Write at address 0x00600018 (0xffffbcb13018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff99dba000. Read at address 0x00600018 (0xffff99dba018): 0x00000000 Write at address 0x00600018 (0xffff99dba018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8afe6000. Read at address 0x00600018 (0xffff8afe6018): 0x00000000 Write at address 0x00600018 (0xffff8afe6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99757000. Read at address 0x00600018 (0xffff99757018): 0x00000000 Write at address 0x00600018 (0xffff99757018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb372b000. Read at address 0x00600018 (0xffffb372b018): 0x00000000 Write at address 0x00600018 (0xffffb372b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86912000. Read at address 0x00600018 (0xffff86912018): 0x00000000 Write at address 0x00600018 (0xffff86912018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8609b000. Read at address 0x00600018 (0xffff8609b018): 0x00000000 Write at address 0x00600018 (0xffff8609b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa711e000. Read at address 0x00600018 (0xffffa711e018): 0x00000000 Write at address 0x00600018 (0xffffa711e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e6fe000. Read at address 0x00600018 (0xffff9e6fe018): 0x00000000 Write at address 0x00600018 (0xffff9e6fe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8ad90000. Read at address 0x00600018 (0xffff8ad90018): 0x00000000 Write at address 0x00600018 (0xffff8ad90018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff904bc000. Read at address 0x00600018 (0xffff904bc018): 0x00000000 Write at address 0x00600018 (0xffff904bc018): 0x00400040, readback 0x00400040 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95294000. Read at address 0x00600018 (0xffff95294018): 0x00000000 Write at address 0x00600018 (0xffff95294018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a359000. Read at address 0x00600018 (0xffff8a359018): 0x00000000 Write at address 0x00600018 (0xffff8a359018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6946000. Read at address 0x00600018 (0xffffa6946018): 0x00000000 Write at address 0x00600018 (0xffffa6946018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82266000. Read at address 0x00600018 (0xffff82266018): 0x00000000 Write at address 0x00600018 (0xffff82266018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0bcd000. Read at address 0x00600018 (0xffffb0bcd018): 0x00000000 Write at address 0x00600018 (0xffffb0bcd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2cc4000. Read at address 0x00600018 (0xffffa2cc4018): 0x00000000 Write at address 0x00600018 (0xffffa2cc4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb99eb000. Read at address 0x00600018 (0xffffb99eb018): 0x00000000 Write at address 0x00600018 (0xffffb99eb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0d69000. Read at address 0x00600018 (0xffffa0d69018): 0x00000000 Write at address 0x00600018 (0xffffa0d69018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9ec3e000. Read at address 0x00600018 (0xffff9ec3e018): 0x00000000 Write at address 0x00600018 (0xffff9ec3e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fb2a000. Read at address 0x00600018 (0xffff7fb2a018): 0x00000000 Write at address 0x00600018 (0xffff7fb2a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf270000. Read at address 0x00600018 (0xffffaf270018): 0x00000000 Write at address 0x00600018 (0xffffaf270018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffabb7a000. Read at address 0x00600018 (0xffffabb7a018): 0x00000000 Write at address 0x00600018 (0xffffabb7a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8eb18000. Read at address 0x00600018 (0xffff8eb18018): 0x00000000 Write at address 0x00600018 (0xffff8eb18018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8bd26000. Read at address 0x00600018 (0xffff8bd26018): 0x00000000 Write at address 0x00600018 (0xffff8bd26018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8328c000. Read at address 0x00600018 (0xffff8328c018): 0x00000000 Write at address 0x00600018 (0xffff8328c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9dceb000. Read at address 0x00600018 (0xffff9dceb018): 0x00000000 Write at address 0x00600018 (0xffff9dceb018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a50a000. Read at address 0x00600018 (0xffff8a50a018): 0x00000000 Write at address 0x00600018 (0xffff8a50a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd172000. Read at address 0x00600018 (0xffffbd172018): 0x00000000 Write at address 0x00600018 (0xffffbd172018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbaf4b000. Read at address 0x00600018 (0xffffbaf4b018): 0x00000000 Write at address 0x00600018 (0xffffbaf4b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf34e000. Read at address 0x00600018 (0xffffbf34e018): 0x00000000 Write at address 0x00600018 (0xffffbf34e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c560000. Read at address 0x00600018 (0xffff8c560018): 0x00000000 Write at address 0x00600018 (0xffff8c560018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff863d4000. Read at address 0x00600018 (0xffff863d4018): 0x00000000 Write at address 0x00600018 (0xffff863d4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaeaba000. Read at address 0x00600018 (0xffffaeaba018): 0x00000000 Write at address 0x00600018 (0xffffaeaba018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91439000. Read at address 0x00600018 (0xffff91439018): 0x00000000 Write at address 0x00600018 (0xffff91439018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8386000. Read at address 0x00600018 (0xffffb8386018): 0x00000000 Write at address 0x00600018 (0xffffb8386018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaeeb2000. Read at address 0x00600018 (0xffffaeeb2018): 0x00000000 Write at address 0x00600018 (0xffffaeeb2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Waiting data available... Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaa0ac000. Read at address 0x00600018 (0xffffaa0ac018): 0x00000000 Write at address 0x00600018 (0xffffaa0ac018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3654000. Read at address 0x00600018 (0xffffb3654018): 0x00000000 Write at address 0x00600018 (0xffffb3654018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9298c000. Read at address 0x00600018 (0xffff9298c018): 0x00000000 Write at address 0x00600018 (0xffff9298c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa148a000. Read at address 0x00600018 (0xffffa148a018): 0x00000000 Write at address 0x00600018 (0xffffa148a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8583d000. Read at address 0x00600018 (0xffff8583d018): 0x00000000 Write at address 0x00600018 (0xffff8583d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff814d7000. Read at address 0x00600018 (0xffff814d7018): 0x00000000 Write at address 0x00600018 (0xffff814d7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4704000. Read at address 0x00600018 (0xffffb4704018): 0x00000000 Write at address 0x00600018 (0xffffb4704018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1144000. Read at address 0x00600018 (0xffffb1144018): 0x00000000 Write at address 0x00600018 (0xffffb1144018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb5fd9000. Read at address 0x00600018 (0xffffb5fd9018): 0x00000000 Write at address 0x00600018 (0xffffb5fd9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff840a0000. Read at address 0x00600018 (0xffff840a0018): 0x00000000 Write at address 0x00600018 (0xffff840a0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff963cc000. Read at address 0x00600018 (0xffff963cc018): 0x00000000 Write at address 0x00600018 (0xffff963cc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd9e0000. Read at address 0x00600018 (0xffffbd9e0018): 0x00000000 Write at address 0x00600018 (0xffffbd9e0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2aeb000. Read at address 0x00600018 (0xffffb2aeb018): 0x00000000 Write at address 0x00600018 (0xffffb2aeb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1378000. Read at address 0x00600018 (0xffffa1378018): 0x00000000 Write at address 0x00600018 (0xffffa1378018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8882a000. Read at address 0x00600018 (0xffff8882a018): 0x00000000 Write at address 0x00600018 (0xffff8882a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff872e5000. Read at address 0x00600018 (0xffff872e5018): 0x00000000 Write at address 0x00600018 (0xffff872e5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached ubi0:textures is mounted. mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9aa73000. Read at address 0x00600018 (0xffff9aa73018): 0x00000000 Write at address 0x00600018 (0xffff9aa73018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaba1a000. Read at address 0x00600018 (0xffffaba1a018): 0x00000000 Write at address 0x00600018 (0xffffaba1a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1439000. Read at address 0x00600018 (0xffffa1439018): 0x00000000 Write at address 0x00600018 (0xffffa1439018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaf056000. Read at address 0x00600018 (0xffffaf056018): 0x00000000 Write at address 0x00600018 (0xffffaf056018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7260000. Read at address 0x00600018 (0xffffb7260018): 0x00000000 Write at address 0x00600018 (0xffffb7260018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb9328000. Read at address 0x00600018 (0xffffb9328018): 0x00000000 Write at address 0x00600018 (0xffffb9328018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa590000. Read at address 0x00600018 (0xffffaa590018): 0x00000000 Write at address 0x00600018 (0xffffaa590018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff981eb000. Read at address 0x00600018 (0xffff981eb018): 0x00000000 Write at address 0x00600018 (0xffff981eb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa8db9000. Read at address 0x00600018 (0xffffa8db9018): 0x00000000 Write at address 0x00600018 (0xffffa8db9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9fb5f000. Read at address 0x00600018 (0xffff9fb5f018): 0x00000000 Write at address 0x00600018 (0xffff9fb5f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9287f000. Read at address 0x00600018 (0xffff9287f018): 0x00000000 Write at address 0x00600018 (0xffff9287f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9d9ec000. Read at address 0x00600018 (0xffff9d9ec018): 0x00000000 Write at address 0x00600018 (0xffff9d9ec018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7ffb6000. Read at address 0x00600018 (0xffff7ffb6018): 0x00000000 Write at address 0x00600018 (0xffff7ffb6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb588c000. Read at address 0x00600018 (0xffffb588c018): 0x00000000 Write at address 0x00600018 (0xffffb588c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaee00000. Read at address 0x00600018 (0xffffaee00018): 0x00000000 Write at address 0x00600018 (0xffffaee00018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb553d000. Read at address 0x00600018 (0xffffb553d018): 0x00000000 Write at address 0x00600018 (0xffffb553d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ca40000. Read at address 0x00600018 (0xffff9ca40018): 0x00000000 Write at address 0x00600018 (0xffff9ca40018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff861bc000. Read at address 0x00600018 (0xffff861bc018): 0x00000000 Write at address 0x00600018 (0xffff861bc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8d259000. Read at address 0x00600018 (0xffff8d259018): 0x00000000 Write at address 0x00600018 (0xffff8d259018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8becd000. Read at address 0x00600018 (0xffff8becd018): 0x00000000 Write at address 0x00600018 (0xffff8becd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae669000. Read at address 0x00600018 (0xffffae669018): 0x00000000 Write at address 0x00600018 (0xffffae669018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb1637000. Read at address 0x00600018 (0xffffb1637018): 0x00000000 Write at address 0x00600018 (0xffffb1637018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8472000. Read at address 0x00600018 (0xffffa8472018): 0x00000000 Write at address 0x00600018 (0xffffa8472018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbc806000. Read at address 0x00600018 (0xffffbc806018): 0x00000000 Write at address 0x00600018 (0xffffbc806018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6612000. Read at address 0x00600018 (0xffffb6612018): 0x00000000 Write at address 0x00600018 (0xffffb6612018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa29fe000. Read at address 0x00600018 (0xffffa29fe018): 0x00000000 Write at address 0x00600018 (0xffffa29fe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff99243000. Read at address 0x00600018 (0xffff99243018): 0x00000000 Write at address 0x00600018 (0xffff99243018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd48f000. Read at address 0x00600018 (0xffffbd48f018): 0x00000000 Write at address 0x00600018 (0xffffbd48f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3ac3000. Read at address 0x00600018 (0xffffa3ac3018): 0x00000000 Write at address 0x00600018 (0xffffa3ac3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87cfc000. Read at address 0x00600018 (0xffff87cfc018): 0x00000000 Write at address 0x00600018 (0xffff87cfc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb154b000. Read at address 0x00600018 (0xffffb154b018): 0x00000000 Write at address 0x00600018 (0xffffb154b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad15c000. Read at address 0x00600018 (0xffffad15c018): 0x00000000 Write at address 0x00600018 (0xffffad15c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached ubi0:animations is mounted. mtd24 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb0874000. Read at address 0x00600018 (0xffffb0874018): 0x00000000 Write at address 0x00600018 (0xffffb0874018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8caec000. Read at address 0x00600018 (0xffff8caec018): 0x00000000 Write at address 0x00600018 (0xffff8caec018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi2:dml_code is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb4aa000. Read at address 0x00600018 (0xffffbb4aa018): 0x00000000 Write at address 0x00600018 (0xffffbb4aa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8aec000. Read at address 0x00600018 (0xffffb8aec018): 0x00000000 Write at address 0x00600018 (0xffffb8aec018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa244d000. Read at address 0x00600018 (0xffffa244d018): 0x00000000 Write at address 0x00600018 (0xffffa244d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2c00000. Read at address 0x00600018 (0xffffb2c00018): 0x00000000 Write at address 0x00600018 (0xffffb2c00018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff919db000. Read at address 0x00600018 (0xffff919db018): 0x00000000 Write at address 0x00600018 (0xffff919db018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9efe6000. Read at address 0x00600018 (0xffff9efe6018): 0x00000000 Write at address 0x00600018 (0xffff9efe6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9dbb2000. Read at address 0x00600018 (0xffff9dbb2018): 0x00000000 Write at address 0x00600018 (0xffff9dbb2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab411000. Read at address 0x00600018 (0xffffab411018): 0x00000000 Write at address 0x00600018 (0xffffab411018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd795000. Read at address 0x00600018 (0xffffbd795018): 0x00000000 Write at address 0x00600018 (0xffffbd795018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88bbb000. Read at address 0x00600018 (0xffff88bbb018): 0x00000000 Write at address 0x00600018 (0xffff88bbb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaf3d9000. Read at address 0x00600018 (0xffffaf3d9018): 0x00000000 Write at address 0x00600018 (0xffffaf3d9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8699000. Read at address 0x00600018 (0xffffb8699018): 0x00000000 Write at address 0x00600018 (0xffffb8699018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8e853000. Read at address 0x00600018 (0xffff8e853018): 0x00000000 Write at address 0x00600018 (0xffff8e853018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff865fa000. Read at address 0x00600018 (0xffff865fa018): 0x00000000 Write at address 0x00600018 (0xffff865fa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff843b9000. Read at address 0x00600018 (0xffff843b9018): 0x00000000 Write at address 0x00600018 (0xffff843b9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa433d000. Read at address 0x00600018 (0xffffa433d018): 0x00000000 Write at address 0x00600018 (0xffffa433d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8f1b2000. Read at address 0x00600018 (0xffff8f1b2018): 0x00000000 Write at address 0x00600018 (0xffff8f1b2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85626000. Read at address 0x00600018 (0xffff85626018): 0x00000000 Write at address 0x00600018 (0xffff85626018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82728000. Read at address 0x00600018 (0xffff82728018): 0x00000000 Write at address 0x00600018 (0xffff82728018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb85e5000. Read at address 0x00600018 (0xffffb85e5018): 0x00000000 Write at address 0x00600018 (0xffffb85e5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff93b06000. Read at address 0x00600018 (0xffff93b06018): 0x00000000 Write at address 0x00600018 (0xffff93b06018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ba8a000. Read at address 0x00600018 (0xffff8ba8a018): 0x00000000 Write at address 0x00600018 (0xffff8ba8a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84ee1000. Read at address 0x00600018 (0xffff84ee1018): 0x00000000 Write at address 0x00600018 (0xffff84ee1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9ae2000. Read at address 0x00600018 (0xffffa9ae2018): 0x00000000 Write at address 0x00600018 (0xffffa9ae2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9e265000. Read at address 0x00600018 (0xffff9e265018): 0x00000000 Write at address 0x00600018 (0xffff9e265018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9dbdf000. Read at address 0x00600018 (0xffff9dbdf018): 0x00000000 Write at address 0x00600018 (0xffff9dbdf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba7e5000. Read at address 0x00600018 (0xffffba7e5018): 0x00000000 Write at address 0x00600018 (0xffffba7e5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaa559000. Read at address 0x00600018 (0xffffaa559018): 0x00000000 Write at address 0x00600018 (0xffffaa559018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91c71000. Read at address 0x00600018 (0xffff91c71018): 0x00000000 Write at address 0x00600018 (0xffff91c71018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff93aeb000. Read at address 0x00600018 (0xffff93aeb018): 0x00000000 Write at address 0x00600018 (0xffff93aeb018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbea01000. Read at address 0x00600018 (0xffffbea01018): 0x00000000 Write at address 0x00600018 (0xffffbea01018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff86844000. Read at address 0x00600018 (0xffff86844018): 0x00000000 Write at address 0x00600018 (0xffff86844018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa17e3000. Read at address 0x00600018 (0xffffa17e3018): 0x00000000 Write at address 0x00600018 (0xffffa17e3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa58af000. Read at address 0x00600018 (0xffffa58af018): 0x00000000 Write at address 0x00600018 (0xffffa58af018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa4792000. Read at address 0x00600018 (0xffffa4792018): 0x00000000 Write at address 0x00600018 (0xffffa4792018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cdd4000. Read at address 0x00600018 (0xffff9cdd4018): 0x00000000 Write at address 0x00600018 (0xffff9cdd4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa4a8f000. Read at address 0x00600018 (0xffffa4a8f018): 0x00000000 Write at address 0x00600018 (0xffffa4a8f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8515e000. Read at address 0x00600018 (0xffff8515e018): 0x00000000 Write at address 0x00600018 (0xffff8515e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9928000. Read at address 0x00600018 (0xffffa9928018): 0x00000000 Write at address 0x00600018 (0xffffa9928018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9fb78000. Read at address 0x00600018 (0xffff9fb78018): 0x00000000 Write at address 0x00600018 (0xffff9fb78018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffba92b000. Read at address 0x00600018 (0xffffba92b018): 0x00000000 Write at address 0x00600018 (0xffffba92b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbcc8e000. Read at address 0x00600018 (0xffffbcc8e018): 0x00000000 Write at address 0x00600018 (0xffffbcc8e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffadb40000. Read at address 0x00600018 (0xffffadb40018): 0x00000000 Write at address 0x00600018 (0xffffadb40018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff862fe000. Read at address 0x00600018 (0xffff862fe018): 0x00000000 Write at address 0x00600018 (0xffff862fe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa9445000. Read at address 0x00600018 (0xffffa9445018): 0x00000000 Write at address 0x00600018 (0xffffa9445018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi2:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbdae9000. Read at address 0x00600018 (0xffffbdae9018): 0x00000000 Write at address 0x00600018 (0xffffbdae9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff927eb000. Read at address 0x00600018 (0xffff927eb018): 0x00000000 Write at address 0x00600018 (0xffff927eb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffad858000. Read at address 0x00600018 (0xffffad858018): 0x00000000 Write at address 0x00600018 (0xffffad858018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8458000. Read at address 0x00600018 (0xffffb8458018): 0x00000000 Write at address 0x00600018 (0xffffb8458018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8cdd5000. Read at address 0x00600018 (0xffff8cdd5018): 0x00000000 Write at address 0x00600018 (0xffff8cdd5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8739e000. Read at address 0x00600018 (0xffff8739e018): 0x00000000 Write at address 0x00600018 (0xffff8739e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9e724000. Read at address 0x00600018 (0xffff9e724018): 0x00000000 Write at address 0x00600018 (0xffff9e724018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. ubi1:textures is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94d51000. Read at address 0x00600018 (0xffff94d51018): 0x00000000 Write at address 0x00600018 (0xffff94d51018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91c9c000. Read at address 0x00600018 (0xffff91c9c018): 0x00000000 Write at address 0x00600018 (0xffff91c9c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d6aa000. Read at address 0x00600018 (0xffff9d6aa018): 0x00000000 Write at address 0x00600018 (0xffff9d6aa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb751f000. Read at address 0x00600018 (0xffffb751f018): 0x00000000 Write at address 0x00600018 (0xffffb751f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa666b000. Read at address 0x00600018 (0xffffa666b018): 0x00000000 Write at address 0x00600018 (0xffffa666b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86258000. Read at address 0x00600018 (0xffff86258018): 0x00000000 Write at address 0x00600018 (0xffff86258018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff87e35000. Read at address 0x00600018 (0xffff87e35018): 0x00000000 Write at address 0x00600018 (0xffff87e35018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab837000. Read at address 0x00600018 (0xffffab837018): 0x00000000 Write at address 0x00600018 (0xffffab837018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c790000. Read at address 0x00600018 (0xffff8c790018): 0x00000000 Write at address 0x00600018 (0xffff8c790018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9feb6000. Read at address 0x00600018 (0xffff9feb6018): 0x00000000 Write at address 0x00600018 (0xffff9feb6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff7f72e000. Read at address 0x00600018 (0xffff7f72e018): 0x00000000 Write at address 0x00600018 (0xffff7f72e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 236 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9fe7a000. Read at address 0x00600018 (0xffff9fe7a018): 0x00000000 Write at address 0x00600018 (0xffff9fe7a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8be6f000. Read at address 0x00600018 (0xffff8be6f018): 0x00000000 Write at address 0x00600018 (0xffff8be6f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb1de6000. Read at address 0x00600018 (0xffffb1de6018): 0x00000000 Write at address 0x00600018 (0xffffb1de6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2a95000. Read at address 0x00600018 (0xffffa2a95018): 0x00000000 Write at address 0x00600018 (0xffffa2a95018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb6b65000. Read at address 0x00600018 (0xffffb6b65018): 0x00000000 Write at address 0x00600018 (0xffffb6b65018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a458000. Read at address 0x00600018 (0xffff8a458018): 0x00000000 Write at address 0x00600018 (0xffff8a458018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8deb6000. Read at address 0x00600018 (0xffff8deb6018): 0x00000000 Write at address 0x00600018 (0xffff8deb6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb0f78000. Read at address 0x00600018 (0xffffb0f78018): 0x00000000 Write at address 0x00600018 (0xffffb0f78018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96b04000. Read at address 0x00600018 (0xffff96b04018): 0x00000000 Write at address 0x00600018 (0xffff96b04018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Bsw_Wrapper_Status_isReady Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8ce82000. Read at address 0x00600018 (0xffff8ce82018): 0x00000000 Write at address 0x00600018 (0xffff8ce82018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb1d44000. Read at address 0x00600018 (0xffffb1d44018): 0x00000000 Write at address 0x00600018 (0xffffb1d44018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6716000. Read at address 0x00600018 (0xffffa6716018): 0x00000000 Write at address 0x00600018 (0xffffa6716018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb5986000. Read at address 0x00600018 (0xffffb5986018): 0x00000000 Write at address 0x00600018 (0xffffb5986018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa04bd000. Read at address 0x00600018 (0xffffa04bd018): 0x00000000 Write at address 0x00600018 (0xffffa04bd018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97e85000. Read at address 0x00600018 (0xffff97e85018): 0x00000000 Write at address 0x00600018 (0xffff97e85018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb81d3000. Read at address 0x00600018 (0xffffb81d3018): 0x00000000 Write at address 0x00600018 (0xffffb81d3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff925c8000. Read at address 0x00600018 (0xffff925c8018): 0x00000000 Write at address 0x00600018 (0xffff925c8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1336000. Read at address 0x00600018 (0xffffa1336018): 0x00000000 Write at address 0x00600018 (0xffffa1336018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7559000. Read at address 0x00600018 (0xffffa7559018): 0x00000000 Write at address 0x00600018 (0xffffa7559018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbabb000. Read at address 0x00600018 (0xffffbbabb018): 0x00000000 Write at address 0x00600018 (0xffffbbabb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2e14000. Read at address 0x00600018 (0xffffa2e14018): 0x00000000 Write at address 0x00600018 (0xffffa2e14018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffad556000. Read at address 0x00600018 (0xffffad556018): 0x00000000 Write at address 0x00600018 (0xffffad556018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa55eb000. Read at address 0x00600018 (0xffffa55eb018): 0x00000000 Write at address 0x00600018 (0xffffa55eb018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9241e000. Read at address 0x00600018 (0xffff9241e018): 0x00000000 Write at address 0x00600018 (0xffff9241e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98075000. Read at address 0x00600018 (0xffff98075018): 0x00000000 Write at address 0x00600018 (0xffff98075018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff84018000. Read at address 0x00600018 (0xffff84018018): 0x00000000 Write at address 0x00600018 (0xffff84018018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8448f000. Read at address 0x00600018 (0xffff8448f018): 0x00000000 Write at address 0x00600018 (0xffff8448f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb1f45000. Read at address 0x00600018 (0xffffb1f45018): 0x00000000 Write at address 0x00600018 (0xffffb1f45018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86d8d000. Read at address 0x00600018 (0xffff86d8d018): 0x00000000 Write at address 0x00600018 (0xffff86d8d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafddb000. Read at address 0x00600018 (0xffffafddb018): 0x00000000 Write at address 0x00600018 (0xffffafddb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff92e86000. Read at address 0x00600018 (0xffff92e86018): 0x00000000 Write at address 0x00600018 (0xffff92e86018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbd996000. Read at address 0x00600018 (0xffffbd996018): 0x00000000 Write at address 0x00600018 (0xffffbd996018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f1ed000. Read at address 0x00600018 (0xffff9f1ed018): 0x00000000 Write at address 0x00600018 (0xffff9f1ed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8cde7000. Read at address 0x00600018 (0xffff8cde7018): 0x00000000 Write at address 0x00600018 (0xffff8cde7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbf214000. Read at address 0x00600018 (0xffffbf214018): 0x00000000 Write at address 0x00600018 (0xffffbf214018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xfffface0c000. Read at address 0x00600018 (0xfffface0c018): 0x00000000 Write at address 0x00600018 (0xfffface0c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9fbb2000. Read at address 0x00600018 (0xffff9fbb2018): 0x00000000 Write at address 0x00600018 (0xffff9fbb2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97709000. Read at address 0x00600018 (0xffff97709018): 0x00000000 Write at address 0x00600018 (0xffff97709018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbb16f000. Read at address 0x00600018 (0xffffbb16f018): 0x00000000 Write at address 0x00600018 (0xffffbb16f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ea40000. Read at address 0x00600018 (0xffff9ea40018): 0x00000000 Write at address 0x00600018 (0xffff9ea40018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9837000. Read at address 0x00600018 (0xffffa9837018): 0x00000000 Write at address 0x00600018 (0xffffa9837018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff884da000. Read at address 0x00600018 (0xffff884da018): 0x00000000 Write at address 0x00600018 (0xffff884da018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8deef000. Read at address 0x00600018 (0xffff8deef018): 0x00000000 Write at address 0x00600018 (0xffff8deef018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa6599000. Read at address 0x00600018 (0xffffa6599018): 0x00000000 Write at address 0x00600018 (0xffffa6599018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa115f000. Read at address 0x00600018 (0xffffa115f018): 0x00000000 Write at address 0x00600018 (0xffffa115f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb13e3000. Read at address 0x00600018 (0xffffb13e3018): 0x00000000 Write at address 0x00600018 (0xffffb13e3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb78fd000. Read at address 0x00600018 (0xffffb78fd018): 0x00000000 Write at address 0x00600018 (0xffffb78fd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4351000. Read at address 0x00600018 (0xffffb4351018): 0x00000000 Write at address 0x00600018 (0xffffb4351018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff85ebb000. Read at address 0x00600018 (0xffff85ebb018): 0x00000000 Write at address 0x00600018 (0xffff85ebb018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95554000. Read at address 0x00600018 (0xffff95554018): 0x00000000 Write at address 0x00600018 (0xffff95554018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7a04000. Read at address 0x00600018 (0xffffa7a04018): 0x00000000 Write at address 0x00600018 (0xffffa7a04018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa643f000. Read at address 0x00600018 (0xffffa643f018): 0x00000000 Write at address 0x00600018 (0xffffa643f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff837ad000. Read at address 0x00600018 (0xffff837ad018): 0x00000000 Write at address 0x00600018 (0xffff837ad018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf1f6000. Read at address 0x00600018 (0xffffaf1f6018): 0x00000000 Write at address 0x00600018 (0xffffaf1f6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff83e51000. Read at address 0x00600018 (0xffff83e51018): 0x00000000 Write at address 0x00600018 (0xffff83e51018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90510000. Read at address 0x00600018 (0xffff90510018): 0x00000000 Write at address 0x00600018 (0xffff90510018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e083000. Read at address 0x00600018 (0xffff8e083018): 0x00000000 Write at address 0x00600018 (0xffff8e083018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa07c2000. Read at address 0x00600018 (0xffffa07c2018): 0x00000000 Write at address 0x00600018 (0xffffa07c2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99180000. Read at address 0x00600018 (0xffff99180018): 0x00000000 Write at address 0x00600018 (0xffff99180018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ed06000. Read at address 0x00600018 (0xffff9ed06018): 0x00000000 Write at address 0x00600018 (0xffff9ed06018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 ubi1:dml_code is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 ubi2:textures is mounted. data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff85977000. Read at address 0x00600018 (0xffff85977018): 0x00000000 Write at address 0x00600018 (0xffff85977018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4287000. Read at address 0x00600018 (0xffffb4287018): 0x00000000 Write at address 0x00600018 (0xffffb4287018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa68be000. Read at address 0x00600018 (0xffffa68be018): 0x00000000 Write at address 0x00600018 (0xffffa68be018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffba29e000. Read at address 0x00600018 (0xffffba29e018): 0x00000000 Write at address 0x00600018 (0xffffba29e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e39d000. Read at address 0x00600018 (0xffff8e39d018): 0x00000000 Write at address 0x00600018 (0xffff8e39d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff95056000. Read at address 0x00600018 (0xffff95056018): 0x00000000 Write at address 0x00600018 (0xffff95056018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80036000. Read at address 0x00600018 (0xffff80036018): 0x00000000 Write at address 0x00600018 (0xffff80036018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbdb6a000. Read at address 0x00600018 (0xffffbdb6a018): 0x00000000 Write at address 0x00600018 (0xffffbdb6a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d892000. Read at address 0x00600018 (0xffff8d892018): 0x00000000 Write at address 0x00600018 (0xffff8d892018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff80821000. Read at address 0x00600018 (0xffff80821018): 0x00000000 Write at address 0x00600018 (0xffff80821018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff85c23000. Read at address 0x00600018 (0xffff85c23018): 0x00000000 Write at address 0x00600018 (0xffff85c23018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffabd5e000. Read at address 0x00600018 (0xffffabd5e018): 0x00000000 Write at address 0x00600018 (0xffffabd5e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb527d000. Read at address 0x00600018 (0xffffb527d018): 0x00000000 Write at address 0x00600018 (0xffffb527d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0e1f000. Read at address 0x00600018 (0xffffa0e1f018): 0x00000000 Write at address 0x00600018 (0xffffa0e1f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 220 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbecea000. Read at address 0x00600018 (0xffffbecea018): 0x00000000 Write at address 0x00600018 (0xffffbecea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba3e5000. Read at address 0x00600018 (0xffffba3e5018): 0x00000000 Write at address 0x00600018 (0xffffba3e5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff956ea000. Read at address 0x00600018 (0xffff956ea018): 0x00000000 Write at address 0x00600018 (0xffff956ea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80384000. Read at address 0x00600018 (0xffff80384018): 0x00000000 Write at address 0x00600018 (0xffff80384018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ae4a000. Read at address 0x00600018 (0xffff8ae4a018): 0x00000000 Write at address 0x00600018 (0xffff8ae4a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbb25000. Read at address 0x00600018 (0xffffbbb25018): 0x00000000 Write at address 0x00600018 (0xffffbbb25018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb095f000. Read at address 0x00600018 (0xffffb095f018): 0x00000000 Write at address 0x00600018 (0xffffb095f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff949c7000. Read at address 0x00600018 (0xffff949c7018): 0x00000000 Write at address 0x00600018 (0xffff949c7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4379000. Read at address 0x00600018 (0xffffb4379018): 0x00000000 Write at address 0x00600018 (0xffffb4379018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 net.ipv6.conf.all.disable_ipv6 = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f089000. Read at address 0x00600018 (0xffff9f089018): 0x00000000 Write at address 0x00600018 (0xffff9f089018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb620d000. Read at address 0x00600018 (0xffffb620d018): 0x00000000 Write at address 0x00600018 (0xffffb620d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd8b9000. Read at address 0x00600018 (0xffffbd8b9018): 0x00000000 Write at address 0x00600018 (0xffffbd8b9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9e069000. Read at address 0x00600018 (0xffff9e069018): 0x00000000 Write at address 0x00600018 (0xffff9e069018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabe59000. Read at address 0x00600018 (0xffffabe59018): 0x00000000 Write at address 0x00600018 (0xffffabe59018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb74c3000. Read at address 0x00600018 (0xffffb74c3018): 0x00000000 Write at address 0x00600018 (0xffffb74c3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffad842000. Read at address 0x00600018 (0xffffad842018): 0x00000000 Write at address 0x00600018 (0xffffad842018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf077000. Read at address 0x00600018 (0xffffaf077018): 0x00000000 Write at address 0x00600018 (0xffffaf077018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff91542000. Read at address 0x00600018 (0xffff91542018): 0x00000000 Write at address 0x00600018 (0xffff91542018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa6cd6000. Read at address 0x00600018 (0xffffa6cd6018): 0x00000000 Write at address 0x00600018 (0xffffa6cd6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8a03b000. Read at address 0x00600018 (0xffff8a03b018): 0x00000000 Write at address 0x00600018 (0xffff8a03b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91cac000. Read at address 0x00600018 (0xffff91cac018): 0x00000000 Write at address 0x00600018 (0xffff91cac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f3ed000. Read at address 0x00600018 (0xffff8f3ed018): 0x00000000 Write at address 0x00600018 (0xffff8f3ed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb683000. Read at address 0x00600018 (0xffffbb683018): 0x00000000 Write at address 0x00600018 (0xffffbb683018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95dd3000. Read at address 0x00600018 (0xffff95dd3018): 0x00000000 Write at address 0x00600018 (0xffff95dd3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen net.ipv6.neigh.eth0/2.retrans_time_ms = 0 stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbef1a000. Read at address 0x00600018 (0xffffbef1a018): 0x00000000 Write at address 0x00600018 (0xffffbef1a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4246000. Read at address 0x00600018 (0xffffb4246018): 0x00000000 Write at address 0x00600018 (0xffffb4246018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7131000. Read at address 0x00600018 (0xffffa7131018): 0x00000000 Write at address 0x00600018 (0xffffa7131018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8c6a000. Read at address 0x00600018 (0xffffa8c6a018): 0x00000000 Write at address 0x00600018 (0xffffa8c6a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadf39000. Read at address 0x00600018 (0xffffadf39018): 0x00000000 Write at address 0x00600018 (0xffffadf39018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad6d5000. Read at address 0x00600018 (0xffffad6d5018): 0x00000000 Write at address 0x00600018 (0xffffad6d5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb54ee000. Read at address 0x00600018 (0xffffb54ee018): 0x00000000 Write at address 0x00600018 (0xffffb54ee018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff989d3000. Read at address 0x00600018 (0xffff989d3018): 0x00000000 Write at address 0x00600018 (0xffff989d3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffab26f000. Read at address 0x00600018 (0xffffab26f018): 0x00000000 Write at address 0x00600018 (0xffffab26f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2e7c000. Read at address 0x00600018 (0xffffb2e7c018): 0x00000000 Write at address 0x00600018 (0xffffb2e7c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbcb39000. Read at address 0x00600018 (0xffffbcb39018): 0x00000000 Write at address 0x00600018 (0xffffbcb39018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! Verified OK [Authenticate]: The dataset 2 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb452d000. Read at address 0x00600018 (0xffffb452d018): 0x00000000 Write at address 0x00600018 (0xffffb452d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb2499000. Read at address 0x00600018 (0xffffb2499018): 0x00000000 Write at address 0x00600018 (0xffffb2499018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92763000. Read at address 0x00600018 (0xffff92763018): 0x00000000 Write at address 0x00600018 (0xffff92763018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa502a000. Read at address 0x00600018 (0xffffa502a018): 0x00000000 Write at address 0x00600018 (0xffffa502a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff90aed000. Read at address 0x00600018 (0xffff90aed018): 0x00000000 Write at address 0x00600018 (0xffff90aed018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafcab000. Read at address 0x00600018 (0xffffafcab018): 0x00000000 Write at address 0x00600018 (0xffffafcab018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa16e4000. Read at address 0x00600018 (0xffffa16e4018): 0x00000000 Write at address 0x00600018 (0xffffa16e4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaaffd000. Read at address 0x00600018 (0xffffaaffd018): 0x00000000 Write at address 0x00600018 (0xffffaaffd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa025e000. Read at address 0x00600018 (0xffffa025e018): 0x00000000 Write at address 0x00600018 (0xffffa025e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff870b8000. Read at address 0x00600018 (0xffff870b8018): 0x00000000 Write at address 0x00600018 (0xffff870b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabe3f000. Read at address 0x00600018 (0xffffabe3f018): 0x00000000 Write at address 0x00600018 (0xffffabe3f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1b49000. Read at address 0x00600018 (0xffffa1b49018): 0x00000000 Write at address 0x00600018 (0xffffa1b49018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb6161000. Read at address 0x00600018 (0xffffb6161018): 0x00000000 Write at address 0x00600018 (0xffffb6161018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached ubi0:animations is mounted. mtd24 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaab00000. Read at address 0x00600018 (0xffffaab00018): 0x00000000 Write at address 0x00600018 (0xffffaab00018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached ubi0:animations is mounted. mtd24 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf177000. Read at address 0x00600018 (0xffffaf177018): 0x00000000 Write at address 0x00600018 (0xffffaf177018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa449a000. Read at address 0x00600018 (0xffffa449a018): 0x00000000 Write at address 0x00600018 (0xffffa449a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2395000. Read at address 0x00600018 (0xffffa2395018): 0x00000000 Write at address 0x00600018 (0xffffa2395018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb7b25000. Read at address 0x00600018 (0xffffb7b25018): 0x00000000 Write at address 0x00600018 (0xffffb7b25018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90030000. Read at address 0x00600018 (0xffff90030018): 0x00000000 Write at address 0x00600018 (0xffff90030018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8e269000. Read at address 0x00600018 (0xffff8e269018): 0x00000000 Write at address 0x00600018 (0xffff8e269018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9840000. Read at address 0x00600018 (0xffffa9840018): 0x00000000 Write at address 0x00600018 (0xffffa9840018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c9ae000. Read at address 0x00600018 (0xffff9c9ae018): 0x00000000 Write at address 0x00600018 (0xffff9c9ae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffba7a0000. Read at address 0x00600018 (0xffffba7a0018): 0x00000000 Write at address 0x00600018 (0xffffba7a0018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8304c000. Read at address 0x00600018 (0xffff8304c018): 0x00000000 Write at address 0x00600018 (0xffff8304c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa4ec0000. Read at address 0x00600018 (0xffffa4ec0018): 0x00000000 Write at address 0x00600018 (0xffffa4ec0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c312000. Read at address 0x00600018 (0xffff9c312018): 0x00000000 Write at address 0x00600018 (0xffff9c312018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83b3b000. Read at address 0x00600018 (0xffff83b3b018): 0x00000000 Write at address 0x00600018 (0xffff83b3b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb10f8000. Read at address 0x00600018 (0xffffb10f8018): 0x00000000 Write at address 0x00600018 (0xffffb10f8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff957bb000. Read at address 0x00600018 (0xffff957bb018): 0x00000000 Write at address 0x00600018 (0xffff957bb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7f949000. Read at address 0x00600018 (0xffff7f949018): 0x00000000 Write at address 0x00600018 (0xffff7f949018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff87f7a000. Read at address 0x00600018 (0xffff87f7a018): 0x00000000 Write at address 0x00600018 (0xffff87f7a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c447000. Read at address 0x00600018 (0xffff8c447018): 0x00000000 Write at address 0x00600018 (0xffff8c447018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98a08000. Read at address 0x00600018 (0xffff98a08018): 0x00000000 Write at address 0x00600018 (0xffff98a08018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbe37f000. Read at address 0x00600018 (0xffffbe37f018): 0x00000000 Write at address 0x00600018 (0xffffbe37f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9a942000. Read at address 0x00600018 (0xffff9a942018): 0x00000000 Write at address 0x00600018 (0xffff9a942018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3d83000. Read at address 0x00600018 (0xffffa3d83018): 0x00000000 Write at address 0x00600018 (0xffffa3d83018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ef4f000. net.ipv6.conf.all.addr_gen_mode = 0 Read at address 0x00600018 (0xffff9ef4f018): 0x00000000 Write at address 0x00600018 (0xffff9ef4f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff81955000. Read at address 0x00600018 (0xffff81955018): 0x00000000 Write at address 0x00600018 (0xffff81955018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98a68000. Read at address 0x00600018 (0xffff98a68018): 0x00000000 Write at address 0x00600018 (0xffff98a68018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa345e000. Read at address 0x00600018 (0xffffa345e018): 0x00000000 Write at address 0x00600018 (0xffffa345e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82942000. Read at address 0x00600018 (0xffff82942018): 0x00000000 Write at address 0x00600018 (0xffff82942018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffad8f9000. Read at address 0x00600018 (0xffffad8f9018): 0x00000000 Write at address 0x00600018 (0xffffad8f9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9dba000. Read at address 0x00600018 (0xffffb9dba018): 0x00000000 Write at address 0x00600018 (0xffffb9dba018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8e2ba000. Read at address 0x00600018 (0xffff8e2ba018): 0x00000000 Write at address 0x00600018 (0xffff8e2ba018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f8f9000. Read at address 0x00600018 (0xffff8f8f9018): 0x00000000 Write at address 0x00600018 (0xffff8f8f9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9b0a9000. Read at address 0x00600018 (0xffff9b0a9018): 0x00000000 Write at address 0x00600018 (0xffff9b0a9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad32d000. Read at address 0x00600018 (0xffffad32d018): 0x00000000 Write at address 0x00600018 (0xffffad32d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff86568000. Read at address 0x00600018 (0xffff86568018): 0x00000000 Write at address 0x00600018 (0xffff86568018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82e3d000. Read at address 0x00600018 (0xffff82e3d018): 0x00000000 Write at address 0x00600018 (0xffff82e3d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94555000. Read at address 0x00600018 (0xffff94555018): 0x00000000 Write at address 0x00600018 (0xffff94555018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb1737000. Read at address 0x00600018 (0xffffb1737018): 0x00000000 Write at address 0x00600018 (0xffffb1737018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb47e9000. Read at address 0x00600018 (0xffffb47e9018): 0x00000000 Write at address 0x00600018 (0xffffb47e9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff950ff000. Read at address 0x00600018 (0xffff950ff018): 0x00000000 Write at address 0x00600018 (0xffff950ff018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb3978000. Read at address 0x00600018 (0xffffb3978018): 0x00000000 Write at address 0x00600018 (0xffffb3978018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbd7b000. Read at address 0x00600018 (0xffffbbd7b018): 0x00000000 Write at address 0x00600018 (0xffffbbd7b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffad971000. Read at address 0x00600018 (0xffffad971018): 0x00000000 Write at address 0x00600018 (0xffffad971018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98a9d000. Read at address 0x00600018 (0xffff98a9d018): 0x00000000 Write at address 0x00600018 (0xffff98a9d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff81800000. Read at address 0x00600018 (0xffff81800018): 0x00000000 Write at address 0x00600018 (0xffff81800018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffac2cc000. Read at address 0x00600018 (0xffffac2cc018): 0x00000000 Write at address 0x00600018 (0xffffac2cc018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8aa87000. Read at address 0x00600018 (0xffff8aa87018): 0x00000000 Write at address 0x00600018 (0xffff8aa87018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0ba0000. Read at address 0x00600018 (0xffffb0ba0018): 0x00000000 Write at address 0x00600018 (0xffffb0ba0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7492000. Read at address 0x00600018 (0xffffa7492018): 0x00000000 Write at address 0x00600018 (0xffffa7492018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80481000. Read at address 0x00600018 (0xffff80481018): 0x00000000 Write at address 0x00600018 (0xffff80481018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd5ed000. Read at address 0x00600018 (0xffffbd5ed018): 0x00000000 Write at address 0x00600018 (0xffffbd5ed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7020000. Read at address 0x00600018 (0xffffb7020018): 0x00000000 Write at address 0x00600018 (0xffffb7020018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff91fe4000. Read at address 0x00600018 (0xffff91fe4018): 0x00000000 Write at address 0x00600018 (0xffff91fe4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81365000. Read at address 0x00600018 (0xffff81365018): 0x00000000 Write at address 0x00600018 (0xffff81365018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9fae0000. Read at address 0x00600018 (0xffff9fae0018): 0x00000000 Write at address 0x00600018 (0xffff9fae0018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa39a7000. Read at address 0x00600018 (0xffffa39a7018): 0x00000000 Write at address 0x00600018 (0xffffa39a7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87c1d000. Read at address 0x00600018 (0xffff87c1d018): 0x00000000 Write at address 0x00600018 (0xffff87c1d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa2825000. Read at address 0x00600018 (0xffffa2825018): 0x00000000 Write at address 0x00600018 (0xffffa2825018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94fdc000. Read at address 0x00600018 (0xffff94fdc018): 0x00000000 Write at address 0x00600018 (0xffff94fdc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafb26000. Read at address 0x00600018 (0xffffafb26018): 0x00000000 Write at address 0x00600018 (0xffffafb26018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9ebe0000. Read at address 0x00600018 (0xffff9ebe0018): 0x00000000 Write at address 0x00600018 (0xffff9ebe0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd568000. Read at address 0x00600018 (0xffffbd568018): 0x00000000 Write at address 0x00600018 (0xffffbd568018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa19a8000. Read at address 0x00600018 (0xffffa19a8018): 0x00000000 Write at address 0x00600018 (0xffffa19a8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa8563000. Read at address 0x00600018 (0xffffa8563018): 0x00000000 Write at address 0x00600018 (0xffffa8563018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9b356000. Read at address 0x00600018 (0xffff9b356018): 0x00000000 Write at address 0x00600018 (0xffff9b356018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ef28000. Read at address 0x00600018 (0xffff8ef28018): 0x00000000 Write at address 0x00600018 (0xffff8ef28018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi0:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaa3c4000. Read at address 0x00600018 (0xffffaa3c4018): 0x00000000 Write at address 0x00600018 (0xffffaa3c4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7805000. Read at address 0x00600018 (0xffffb7805018): 0x00000000 Write at address 0x00600018 (0xffffb7805018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi0:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8815d000. Read at address 0x00600018 (0xffff8815d018): 0x00000000 Write at address 0x00600018 (0xffff8815d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff7fa59000. Read at address 0x00600018 (0xffff7fa59018): 0x00000000 Write at address 0x00600018 (0xffff7fa59018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb286c000. Read at address 0x00600018 (0xffffb286c018): 0x00000000 Write at address 0x00600018 (0xffffb286c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9707e000. Read at address 0x00600018 (0xffff9707e018): 0x00000000 Write at address 0x00600018 (0xffff9707e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi1:animations is mounted. ubi0:textures is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8c00e000. Read at address 0x00600018 (0xffff8c00e018): 0x00000000 Write at address 0x00600018 (0xffff8c00e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaf8af000. Read at address 0x00600018 (0xffffaf8af018): 0x00000000 Write at address 0x00600018 (0xffffaf8af018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b57f000. Read at address 0x00600018 (0xffff8b57f018): 0x00000000 Write at address 0x00600018 (0xffff8b57f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa43c000. Read at address 0x00600018 (0xffffaa43c018): 0x00000000 Write at address 0x00600018 (0xffffaa43c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbedfd000. Read at address 0x00600018 (0xffffbedfd018): 0x00000000 Write at address 0x00600018 (0xffffbedfd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbd276000. Read at address 0x00600018 (0xffffbd276018): 0x00000000 Write at address 0x00600018 (0xffffbd276018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9d423000. Read at address 0x00600018 (0xffff9d423018): 0x00000000 Write at address 0x00600018 (0xffff9d423018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff85b04000. Read at address 0x00600018 (0xffff85b04018): 0x00000000 Write at address 0x00600018 (0xffff85b04018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9632000. Read at address 0x00600018 (0xffffb9632018): 0x00000000 Write at address 0x00600018 (0xffffb9632018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f6f9000. Read at address 0x00600018 (0xffff9f6f9018): 0x00000000 Write at address 0x00600018 (0xffff9f6f9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa1bac000. Read at address 0x00600018 (0xffffa1bac018): 0x00000000 Write at address 0x00600018 (0xffffa1bac018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8a455000. Read at address 0x00600018 (0xffff8a455018): 0x00000000 Write at address 0x00600018 (0xffff8a455018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0a86000. Read at address 0x00600018 (0xffffb0a86018): 0x00000000 Write at address 0x00600018 (0xffffb0a86018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbce09000. Read at address 0x00600018 (0xffffbce09018): 0x00000000 Write at address 0x00600018 (0xffffbce09018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa23f4000. Read at address 0x00600018 (0xffffa23f4018): 0x00000000 Write at address 0x00600018 (0xffffa23f4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Memory mapped at address 0xffff9749c000. Read at address 0x00600018 (0xffff9749c018): 0x00000000 Write at address 0x00600018 (0xffff9749c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff905c6000. Read at address 0x00600018 (0xffff905c6018): 0x00000000 Write at address 0x00600018 (0xffff905c6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9785000. Read at address 0x00600018 (0xffffb9785018): 0x00000000 Write at address 0x00600018 (0xffffb9785018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8dece000. Read at address 0x00600018 (0xffff8dece018): 0x00000000 Write at address 0x00600018 (0xffff8dece018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80f3a000. Read at address 0x00600018 (0xffff80f3a018): 0x00000000 Write at address 0x00600018 (0xffff80f3a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff995fc000. Read at address 0x00600018 (0xffff995fc018): 0x00000000 Write at address 0x00600018 (0xffff995fc018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffba522000. Read at address 0x00600018 (0xffffba522018): 0x00000000 Write at address 0x00600018 (0xffffba522018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaaa81000. Read at address 0x00600018 (0xffffaaa81018): 0x00000000 Write at address 0x00600018 (0xffffaaa81018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb02f2000. Read at address 0x00600018 (0xffffb02f2018): 0x00000000 Write at address 0x00600018 (0xffffb02f2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb0848000. Read at address 0x00600018 (0xffffb0848018): 0x00000000 Write at address 0x00600018 (0xffffb0848018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf907000. Read at address 0x00600018 (0xffffaf907018): 0x00000000 Write at address 0x00600018 (0xffffaf907018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi2:textures is mounted. ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6179000. Read at address 0x00600018 (0xffffb6179018): 0x00000000 Write at address 0x00600018 (0xffffb6179018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffab158000. Read at address 0x00600018 (0xffffab158018): 0x00000000 Write at address 0x00600018 (0xffffab158018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90015000. Read at address 0x00600018 (0xffff90015018): 0x00000000 Write at address 0x00600018 (0xffff90015018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8cf56000. Read at address 0x00600018 (0xffff8cf56018): 0x00000000 Write at address 0x00600018 (0xffff8cf56018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98f35000. Read at address 0x00600018 (0xffff98f35018): 0x00000000 Write at address 0x00600018 (0xffff98f35018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8ead000. Read at address 0x00600018 (0xffffa8ead018): 0x00000000 Write at address 0x00600018 (0xffffa8ead018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96712000. Read at address 0x00600018 (0xffff96712018): 0x00000000 Write at address 0x00600018 (0xffff96712018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9dc89000. Read at address 0x00600018 (0xffff9dc89018): 0x00000000 Write at address 0x00600018 (0xffff9dc89018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4deb000. Read at address 0x00600018 (0xffffa4deb018): 0x00000000 Write at address 0x00600018 (0xffffa4deb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86b2f000. Read at address 0x00600018 (0xffff86b2f018): 0x00000000 Write at address 0x00600018 (0xffff86b2f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9fc9b000. Read at address 0x00600018 (0xffff9fc9b018): 0x00000000 Write at address 0x00600018 (0xffff9fc9b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3dab000. Read at address 0x00600018 (0xffffa3dab018): 0x00000000 Write at address 0x00600018 (0xffffa3dab018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d42b000. Read at address 0x00600018 (0xffff8d42b018): 0x00000000 Write at address 0x00600018 (0xffff8d42b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92803000. Read at address 0x00600018 (0xffff92803018): 0x00000000 Write at address 0x00600018 (0xffff92803018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d883000. Read at address 0x00600018 (0xffff8d883018): 0x00000000 Write at address 0x00600018 (0xffff8d883018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94fba000. Read at address 0x00600018 (0xffff94fba018): 0x00000000 Write at address 0x00600018 (0xffff94fba018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91f96000. Read at address 0x00600018 (0xffff91f96018): 0x00000000 Write at address 0x00600018 (0xffff91f96018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff81ad4000. Read at address 0x00600018 (0xffff81ad4018): 0x00000000 Write at address 0x00600018 (0xffff81ad4018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5bf4000. Read at address 0x00600018 (0xffffa5bf4018): 0x00000000 Write at address 0x00600018 (0xffffa5bf4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1ff4000. Read at address 0x00600018 (0xffffa1ff4018): 0x00000000 Write at address 0x00600018 (0xffffa1ff4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8a8d6000. Read at address 0x00600018 (0xffff8a8d6018): 0x00000000 Write at address 0x00600018 (0xffff8a8d6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8dd24000. Read at address 0x00600018 (0xffff8dd24018): 0x00000000 Write at address 0x00600018 (0xffff8dd24018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4c4f000. Read at address 0x00600018 (0xffffa4c4f018): 0x00000000 Write at address 0x00600018 (0xffffa4c4f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa58ce000. Read at address 0x00600018 (0xffffa58ce018): 0x00000000 Write at address 0x00600018 (0xffffa58ce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f009000. Read at address 0x00600018 (0xffff9f009018): 0x00000000 Write at address 0x00600018 (0xffff9f009018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf3f3000. Read at address 0x00600018 (0xffffbf3f3018): 0x00000000 Write at address 0x00600018 (0xffffbf3f3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99324000. Read at address 0x00600018 (0xffff99324018): 0x00000000 Write at address 0x00600018 (0xffff99324018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff868bd000. Read at address 0x00600018 (0xffff868bd018): 0x00000000 Write at address 0x00600018 (0xffff868bd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb22a1000. Read at address 0x00600018 (0xffffb22a1018): 0x00000000 Write at address 0x00600018 (0xffffb22a1018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9316e000. Read at address 0x00600018 (0xffff9316e018): 0x00000000 Write at address 0x00600018 (0xffff9316e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94b6b000. Read at address 0x00600018 (0xffff94b6b018): 0x00000000 Write at address 0x00600018 (0xffff94b6b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb13e4000. Read at address 0x00600018 (0xffffb13e4018): 0x00000000 Write at address 0x00600018 (0xffffb13e4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb6e08000. Read at address 0x00600018 (0xffffb6e08018): 0x00000000 Write at address 0x00600018 (0xffffb6e08018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90523000. Read at address 0x00600018 (0xffff90523018): 0x00000000 Write at address 0x00600018 (0xffff90523018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0aa7000. Read at address 0x00600018 (0xffffa0aa7018): 0x00000000 Write at address 0x00600018 (0xffffa0aa7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa76b6000. Read at address 0x00600018 (0xffffa76b6018): 0x00000000 Write at address 0x00600018 (0xffffa76b6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbc959000. Read at address 0x00600018 (0xffffbc959018): 0x00000000 Write at address 0x00600018 (0xffffbc959018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff946d9000. Read at address 0x00600018 (0xffff946d9018): 0x00000000 Write at address 0x00600018 (0xffff946d9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6bc5000. Read at address 0x00600018 (0xffffa6bc5018): 0x00000000 Write at address 0x00600018 (0xffffa6bc5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb06df000. Read at address 0x00600018 (0xffffb06df018): 0x00000000 Write at address 0x00600018 (0xffffb06df018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9dbff000. Read at address 0x00600018 (0xffff9dbff018): 0x00000000 Write at address 0x00600018 (0xffff9dbff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi1:dml_code is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a186000. Read at address 0x00600018 (0xffff9a186018): 0x00000000 Write at address 0x00600018 (0xffff9a186018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94648000. Read at address 0x00600018 (0xffff94648018): 0x00000000 Write at address 0x00600018 (0xffff94648018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7e19000. Read at address 0x00600018 (0xffffa7e19018): 0x00000000 Write at address 0x00600018 (0xffffa7e19018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbc09000. Read at address 0x00600018 (0xffffbbc09018): 0x00000000 Write at address 0x00600018 (0xffffbbc09018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff83665000. Read at address 0x00600018 (0xffff83665018): 0x00000000 Write at address 0x00600018 (0xffff83665018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Memory mapped at address 0xffffaa643000. Read at address 0x00600018 (0xffffaa643018): 0x00000000 Write at address 0x00600018 (0xffffaa643018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff959b6000. Read at address 0x00600018 (0xffff959b6018): 0x00000000 Write at address 0x00600018 (0xffff959b6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91985000. Read at address 0x00600018 (0xffff91985018): 0x00000000 Write at address 0x00600018 (0xffff91985018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffab608000. Read at address 0x00600018 (0xffffab608018): 0x00000000 Write at address 0x00600018 (0xffffab608018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6a13000. Read at address 0x00600018 (0xffffa6a13018): 0x00000000 Write at address 0x00600018 (0xffffa6a13018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaaf8d000. Read at address 0x00600018 (0xffffaaf8d018): 0x00000000 Write at address 0x00600018 (0xffffaaf8d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff916b0000. Read at address 0x00600018 (0xffff916b0018): 0x00000000 Write at address 0x00600018 (0xffff916b0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8455e000. Read at address 0x00600018 (0xffff8455e018): 0x00000000 Write at address 0x00600018 (0xffff8455e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9354d000. Read at address 0x00600018 (0xffff9354d018): 0x00000000 Write at address 0x00600018 (0xffff9354d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92bb9000. Read at address 0x00600018 (0xffff92bb9018): 0x00000000 Write at address 0x00600018 (0xffff92bb9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff98d3d000. Read at address 0x00600018 (0xffff98d3d018): 0x00000000 Write at address 0x00600018 (0xffff98d3d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8607e000. Read at address 0x00600018 (0xffff8607e018): 0x00000000 Write at address 0x00600018 (0xffff8607e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92ac9000. Read at address 0x00600018 (0xffff92ac9018): 0x00000000 Write at address 0x00600018 (0xffff92ac9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0bc8000. Read at address 0x00600018 (0xffffa0bc8018): 0x00000000 Write at address 0x00600018 (0xffffa0bc8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97856000. Read at address 0x00600018 (0xffff97856018): 0x00000000 Write at address 0x00600018 (0xffff97856018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac9e8000. Read at address 0x00600018 (0xffffac9e8018): 0x00000000 Write at address 0x00600018 (0xffffac9e8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf611000. Read at address 0x00600018 (0xffffbf611018): 0x00000000 Write at address 0x00600018 (0xffffbf611018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb66a7000. Read at address 0x00600018 (0xffffb66a7018): 0x00000000 Write at address 0x00600018 (0xffffb66a7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88214000. Read at address 0x00600018 (0xffff88214018): 0x00000000 Write at address 0x00600018 (0xffff88214018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88d20000. Read at address 0x00600018 (0xffff88d20018): 0x00000000 Write at address 0x00600018 (0xffff88d20018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab0f1000. Read at address 0x00600018 (0xffffab0f1018): 0x00000000 Write at address 0x00600018 (0xffffab0f1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8daa1000. Read at address 0x00600018 (0xffff8daa1018): 0x00000000 Write at address 0x00600018 (0xffff8daa1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe395000. Read at address 0x00600018 (0xffffbe395018): 0x00000000 Write at address 0x00600018 (0xffffbe395018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa264000. Read at address 0x00600018 (0xffffaa264018): 0x00000000 Write at address 0x00600018 (0xffffaa264018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffba761000. Read at address 0x00600018 (0xffffba761018): 0x00000000 Write at address 0x00600018 (0xffffba761018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff834b4000. Read at address 0x00600018 (0xffff834b4018): 0x00000000 Write at address 0x00600018 (0xffff834b4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82533000. Read at address 0x00600018 (0xffff82533018): 0x00000000 Write at address 0x00600018 (0xffff82533018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff89567000. Read at address 0x00600018 (0xffff89567018): 0x00000000 Write at address 0x00600018 (0xffff89567018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c410000. Read at address 0x00600018 (0xffff9c410018): 0x00000000 Write at address 0x00600018 (0xffff9c410018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb37c4000. Read at address 0x00600018 (0xffffb37c4018): 0x00000000 Write at address 0x00600018 (0xffffb37c4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94210000. Read at address 0x00600018 (0xffff94210018): 0x00000000 Write at address 0x00600018 (0xffff94210018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa52d2000. Read at address 0x00600018 (0xffffa52d2018): 0x00000000 Write at address 0x00600018 (0xffffa52d2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8968d000. Read at address 0x00600018 (0xffff8968d018): 0x00000000 Write at address 0x00600018 (0xffff8968d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb265a000. Read at address 0x00600018 (0xffffb265a018): 0x00000000 Write at address 0x00600018 (0xffffb265a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0f2c000. Read at address 0x00600018 (0xffffb0f2c018): 0x00000000 Write at address 0x00600018 (0xffffb0f2c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa6e3e000. Read at address 0x00600018 (0xffffa6e3e018): 0x00000000 Write at address 0x00600018 (0xffffa6e3e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c908000. Read at address 0x00600018 (0xffff9c908018): 0x00000000 Write at address 0x00600018 (0xffff9c908018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8df8c000. Read at address 0x00600018 (0xffff8df8c018): 0x00000000 Write at address 0x00600018 (0xffff8df8c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff94a2b000. Read at address 0x00600018 (0xffff94a2b018): 0x00000000 Write at address 0x00600018 (0xffff94a2b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb373e000. Read at address 0x00600018 (0xffffb373e018): 0x00000000 Write at address 0x00600018 (0xffffb373e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88974000. Read at address 0x00600018 (0xffff88974018): 0x00000000 Write at address 0x00600018 (0xffff88974018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff888cf000. Read at address 0x00600018 (0xffff888cf018): 0x00000000 Write at address 0x00600018 (0xffff888cf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff92a66000. Read at address 0x00600018 (0xffff92a66018): 0x00000000 Write at address 0x00600018 (0xffff92a66018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96e5a000. Read at address 0x00600018 (0xffff96e5a018): 0x00000000 Write at address 0x00600018 (0xffff96e5a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3a3d000. Read at address 0x00600018 (0xffffa3a3d018): 0x00000000 Write at address 0x00600018 (0xffffa3a3d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb88fc000. Read at address 0x00600018 (0xffffb88fc018): 0x00000000 Write at address 0x00600018 (0xffffb88fc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff93cdc000. Read at address 0x00600018 (0xffff93cdc018): 0x00000000 Write at address 0x00600018 (0xffff93cdc018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb892f000. Read at address 0x00600018 (0xffffb892f018): 0x00000000 Write at address 0x00600018 (0xffffb892f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa318f000. Read at address 0x00600018 (0xffffa318f018): 0x00000000 Write at address 0x00600018 (0xffffa318f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9eee1000. Read at address 0x00600018 (0xffff9eee1018): 0x00000000 Write at address 0x00600018 (0xffff9eee1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbed73000. Read at address 0x00600018 (0xffffbed73018): 0x00000000 Write at address 0x00600018 (0xffffbed73018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb5e9a000. Read at address 0x00600018 (0xffffb5e9a018): 0x00000000 Write at address 0x00600018 (0xffffb5e9a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb8a1a000. Read at address 0x00600018 (0xffffb8a1a018): 0x00000000 Write at address 0x00600018 (0xffffb8a1a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1596000. Read at address 0x00600018 (0xffffb1596018): 0x00000000 Write at address 0x00600018 (0xffffb1596018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffabbff000. Read at address 0x00600018 (0xffffabbff018): 0x00000000 Write at address 0x00600018 (0xffffabbff018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb7b20000. Read at address 0x00600018 (0xffffb7b20018): 0x00000000 Write at address 0x00600018 (0xffffb7b20018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa868f000. Read at address 0x00600018 (0xffffa868f018): 0x00000000 Write at address 0x00600018 (0xffffa868f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8bea9000. Read at address 0x00600018 (0xffff8bea9018): 0x00000000 Write at address 0x00600018 (0xffff8bea9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8cfdd000. Read at address 0x00600018 (0xffff8cfdd018): 0x00000000 Write at address 0x00600018 (0xffff8cfdd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff828f7000. Read at address 0x00600018 (0xffff828f7018): 0x00000000 Write at address 0x00600018 (0xffff828f7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 net.ipv6.conf.eth0.dad_transmits = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa0f8000. Read at address 0x00600018 (0xffffaa0f8018): 0x00000000 Write at address 0x00600018 (0xffffaa0f8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8d45c000. Read at address 0x00600018 (0xffff8d45c018): 0x00000000 Write at address 0x00600018 (0xffff8d45c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85229000. Read at address 0x00600018 (0xffff85229018): 0x00000000 Write at address 0x00600018 (0xffff85229018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff99dfc000. Read at address 0x00600018 (0xffff99dfc018): 0x00000000 Write at address 0x00600018 (0xffff99dfc018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d50a000. Read at address 0x00600018 (0xffff8d50a018): 0x00000000 Write at address 0x00600018 (0xffff8d50a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbdd4e000. Read at address 0x00600018 (0xffffbdd4e018): 0x00000000 Write at address 0x00600018 (0xffffbdd4e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b841000. Read at address 0x00600018 (0xffff8b841018): 0x00000000 Write at address 0x00600018 (0xffff8b841018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc62e000. Read at address 0x00600018 (0xffffbc62e018): 0x00000000 Write at address 0x00600018 (0xffffbc62e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff820e7000. Read at address 0x00600018 (0xffff820e7018): 0x00000000 Write at address 0x00600018 (0xffff820e7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbcfdc000. Read at address 0x00600018 (0xffffbcfdc018): 0x00000000 Write at address 0x00600018 (0xffffbcfdc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96e2c000. Read at address 0x00600018 (0xffff96e2c018): 0x00000000 Write at address 0x00600018 (0xffff96e2c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff968ca000. Read at address 0x00600018 (0xffff968ca018): 0x00000000 Write at address 0x00600018 (0xffff968ca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8446000. Read at address 0x00600018 (0xffffb8446018): 0x00000000 Write at address 0x00600018 (0xffffb8446018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8841e000. Read at address 0x00600018 (0xffff8841e018): 0x00000000 Write at address 0x00600018 (0xffff8841e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb4008000. Read at address 0x00600018 (0xffffb4008018): 0x00000000 Write at address 0x00600018 (0xffffb4008018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91193000. Read at address 0x00600018 (0xffff91193018): 0x00000000 Write at address 0x00600018 (0xffff91193018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81ac8000. Read at address 0x00600018 (0xffff81ac8018): 0x00000000 Write at address 0x00600018 (0xffff81ac8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa0e52000. Read at address 0x00600018 (0xffffa0e52018): 0x00000000 Write at address 0x00600018 (0xffffa0e52018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaf16a000. Read at address 0x00600018 (0xffffaf16a018): 0x00000000 Write at address 0x00600018 (0xffffaf16a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa80bf000. Read at address 0x00600018 (0xffffa80bf018): 0x00000000 Write at address 0x00600018 (0xffffa80bf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a685000. Read at address 0x00600018 (0xffff8a685018): 0x00000000 Write at address 0x00600018 (0xffff8a685018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb3a6e000. Read at address 0x00600018 (0xffffb3a6e018): 0x00000000 Write at address 0x00600018 (0xffffb3a6e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff97fcd000. Read at address 0x00600018 (0xffff97fcd018): 0x00000000 Write at address 0x00600018 (0xffff97fcd018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff985d1000. Read at address 0x00600018 (0xffff985d1018): 0x00000000 Write at address 0x00600018 (0xffff985d1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb3724000. Read at address 0x00600018 (0xffffb3724018): 0x00000000 Write at address 0x00600018 (0xffffb3724018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa3f63000. Read at address 0x00600018 (0xffffa3f63018): 0x00000000 Write at address 0x00600018 (0xffffa3f63018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98ea3000. Read at address 0x00600018 (0xffff98ea3018): 0x00000000 Write at address 0x00600018 (0xffff98ea3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 net.ipv6.conf.all.disable_ipv6 = 0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb02b000. Read at address 0x00600018 (0xffffbb02b018): 0x00000000 Write at address 0x00600018 (0xffffbb02b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff84492000. Read at address 0x00600018 (0xffff84492018): 0x00000000 Write at address 0x00600018 (0xffff84492018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95be7000. Read at address 0x00600018 (0xffff95be7018): 0x00000000 Write at address 0x00600018 (0xffff95be7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbae4d000. Read at address 0x00600018 (0xffffbae4d018): 0x00000000 Write at address 0x00600018 (0xffffbae4d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff94b3d000. Read at address 0x00600018 (0xffff94b3d018): 0x00000000 Write at address 0x00600018 (0xffff94b3d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8a3c5000. Read at address 0x00600018 (0xffff8a3c5018): 0x00000000 Write at address 0x00600018 (0xffff8a3c5018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fe73000. Read at address 0x00600018 (0xffff8fe73018): 0x00000000 Write at address 0x00600018 (0xffff8fe73018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff922d6000. Read at address 0x00600018 (0xffff922d6018): 0x00000000 Write at address 0x00600018 (0xffff922d6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0907000. Read at address 0x00600018 (0xffffa0907018): 0x00000000 Write at address 0x00600018 (0xffffa0907018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8cf4b000. Read at address 0x00600018 (0xffff8cf4b018): 0x00000000 Write at address 0x00600018 (0xffff8cf4b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8a175000. Read at address 0x00600018 (0xffff8a175018): 0x00000000 Write at address 0x00600018 (0xffff8a175018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb1896000. Read at address 0x00600018 (0xffffb1896018): 0x00000000 Write at address 0x00600018 (0xffffb1896018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa43b0000. Read at address 0x00600018 (0xffffa43b0018): 0x00000000 Write at address 0x00600018 (0xffffa43b0018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff834e9000. Read at address 0x00600018 (0xffff834e9018): 0x00000000 Write at address 0x00600018 (0xffff834e9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cb80000. Read at address 0x00600018 (0xffff9cb80018): 0x00000000 Write at address 0x00600018 (0xffff9cb80018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8b710000. Read at address 0x00600018 (0xffff8b710018): 0x00000000 Write at address 0x00600018 (0xffff8b710018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff89b19000. Read at address 0x00600018 (0xffff89b19018): 0x00000000 Write at address 0x00600018 (0xffff89b19018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93902000. Read at address 0x00600018 (0xffff93902018): 0x00000000 Write at address 0x00600018 (0xffff93902018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Memory mapped at address 0xffffbf699000. Read at address 0x00600018 (0xffffbf699018): 0x00000000 Write at address 0x00600018 (0xffffbf699018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9ab0d000. Read at address 0x00600018 (0xffff9ab0d018): 0x00000000 Write at address 0x00600018 (0xffff9ab0d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb06d4000. Read at address 0x00600018 (0xffffb06d4018): 0x00000000 Write at address 0x00600018 (0xffffb06d4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa51c4000. Read at address 0x00600018 (0xffffa51c4018): 0x00000000 Write at address 0x00600018 (0xffffa51c4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ae04000. Read at address 0x00600018 (0xffff8ae04018): 0x00000000 Write at address 0x00600018 (0xffff8ae04018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffae0d0000. Read at address 0x00600018 (0xffffae0d0018): 0x00000000 Write at address 0x00600018 (0xffffae0d0018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81039000. Read at address 0x00600018 (0xffff81039018): 0x00000000 Write at address 0x00600018 (0xffff81039018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0ba6000. Read at address 0x00600018 (0xffffa0ba6018): 0x00000000 Write at address 0x00600018 (0xffffa0ba6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff872d7000. Read at address 0x00600018 (0xffff872d7018): 0x00000000 Write at address 0x00600018 (0xffff872d7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa464c000. Read at address 0x00600018 (0xffffa464c018): 0x00000000 Write at address 0x00600018 (0xffffa464c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93871000. Read at address 0x00600018 (0xffff93871018): 0x00000000 Write at address 0x00600018 (0xffff93871018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffad8db000. Read at address 0x00600018 (0xffffad8db018): 0x00000000 Write at address 0x00600018 (0xffffad8db018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94d01000. Read at address 0x00600018 (0xffff94d01018): 0x00000000 Write at address 0x00600018 (0xffff94d01018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9fb31000. Read at address 0x00600018 (0xffff9fb31018): 0x00000000 Write at address 0x00600018 (0xffff9fb31018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9df1b000. Read at address 0x00600018 (0xffff9df1b018): 0x00000000 Write at address 0x00600018 (0xffff9df1b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc0ad000. Read at address 0x00600018 (0xffffbc0ad018): 0x00000000 Write at address 0x00600018 (0xffffbc0ad018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb219a000. Read at address 0x00600018 (0xffffb219a018): 0x00000000 Write at address 0x00600018 (0xffffb219a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa37a8000. Read at address 0x00600018 (0xffffa37a8018): 0x00000000 Write at address 0x00600018 (0xffffa37a8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff802c3000. Read at address 0x00600018 (0xffff802c3018): 0x00000000 Write at address 0x00600018 (0xffff802c3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ca91000. Read at address 0x00600018 (0xffff9ca91018): 0x00000000 Write at address 0x00600018 (0xffff9ca91018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bb01000. Read at address 0x00600018 (0xffff9bb01018): 0x00000000 Write at address 0x00600018 (0xffff9bb01018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff97427000. Read at address 0x00600018 (0xffff97427018): 0x00000000 Write at address 0x00600018 (0xffff97427018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90ebc000. Read at address 0x00600018 (0xffff90ebc018): 0x00000000 Write at address 0x00600018 (0xffff90ebc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa895e000. Read at address 0x00600018 (0xffffa895e018): 0x00000000 Write at address 0x00600018 (0xffffa895e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa628b000. Read at address 0x00600018 (0xffffa628b018): 0x00000000 Write at address 0x00600018 (0xffffa628b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5ea9000. Read at address 0x00600018 (0xffffb5ea9018): 0x00000000 Write at address 0x00600018 (0xffffb5ea9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff92135000. Read at address 0x00600018 (0xffff92135018): 0x00000000 Write at address 0x00600018 (0xffff92135018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad84d000. Read at address 0x00600018 (0xffffad84d018): 0x00000000 Write at address 0x00600018 (0xffffad84d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbec67000. Read at address 0x00600018 (0xffffbec67018): 0x00000000 Write at address 0x00600018 (0xffffbec67018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7db5000. Read at address 0x00600018 (0xffffb7db5018): 0x00000000 Write at address 0x00600018 (0xffffb7db5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb635a000. Read at address 0x00600018 (0xffffb635a018): 0x00000000 Write at address 0x00600018 (0xffffb635a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81688000. Read at address 0x00600018 (0xffff81688018): 0x00000000 Write at address 0x00600018 (0xffff81688018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8d483000. Read at address 0x00600018 (0xffff8d483018): 0x00000000 Write at address 0x00600018 (0xffff8d483018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa00fc000. Read at address 0x00600018 (0xffffa00fc018): 0x00000000 Write at address 0x00600018 (0xffffa00fc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9ef5b000. Read at address 0x00600018 (0xffff9ef5b018): 0x00000000 Write at address 0x00600018 (0xffff9ef5b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8a79f000. Read at address 0x00600018 (0xffff8a79f018): 0x00000000 Write at address 0x00600018 (0xffff8a79f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96343000. Read at address 0x00600018 (0xffff96343018): 0x00000000 Write at address 0x00600018 (0xffff96343018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98739000. Read at address 0x00600018 (0xffff98739018): 0x00000000 Write at address 0x00600018 (0xffff98739018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8ba9c000. Read at address 0x00600018 (0xffff8ba9c018): 0x00000000 Write at address 0x00600018 (0xffff8ba9c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9fb6f000. Read at address 0x00600018 (0xffff9fb6f018): 0x00000000 Write at address 0x00600018 (0xffff9fb6f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb9b62000. Read at address 0x00600018 (0xffffb9b62018): 0x00000000 Write at address 0x00600018 (0xffffb9b62018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3eeb000. Read at address 0x00600018 (0xffffa3eeb018): 0x00000000 Write at address 0x00600018 (0xffffa3eeb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbe0a3000. Read at address 0x00600018 (0xffffbe0a3018): 0x00000000 Write at address 0x00600018 (0xffffbe0a3018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb27d7000. Read at address 0x00600018 (0xffffb27d7018): 0x00000000 Write at address 0x00600018 (0xffffb27d7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9fd78000. Read at address 0x00600018 (0xffff9fd78018): 0x00000000 Write at address 0x00600018 (0xffff9fd78018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad0f4000. Read at address 0x00600018 (0xffffad0f4018): 0x00000000 Write at address 0x00600018 (0xffffad0f4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff958e6000. Read at address 0x00600018 (0xffff958e6018): 0x00000000 Write at address 0x00600018 (0xffff958e6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffabe97000. Read at address 0x00600018 (0xffffabe97018): 0x00000000 Write at address 0x00600018 (0xffffabe97018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8ff5000. Read at address 0x00600018 (0xffffb8ff5018): 0x00000000 Write at address 0x00600018 (0xffffb8ff5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb836f000. Read at address 0x00600018 (0xffffb836f018): 0x00000000 Write at address 0x00600018 (0xffffb836f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff834df000. Read at address 0x00600018 (0xffff834df018): 0x00000000 Write at address 0x00600018 (0xffff834df018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8cad000. Read at address 0x00600018 (0xffffa8cad018): 0x00000000 Write at address 0x00600018 (0xffffa8cad018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9027f000. Read at address 0x00600018 (0xffff9027f018): 0x00000000 Write at address 0x00600018 (0xffff9027f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8318c000. Read at address 0x00600018 (0xffff8318c018): 0x00000000 Write at address 0x00600018 (0xffff8318c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8d4c000. Read at address 0x00600018 (0xffffb8d4c018): 0x00000000 Write at address 0x00600018 (0xffffb8d4c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8ee4a000. Read at address 0x00600018 (0xffff8ee4a018): 0x00000000 Write at address 0x00600018 (0xffff8ee4a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5518000. Read at address 0x00600018 (0xffffa5518018): 0x00000000 Write at address 0x00600018 (0xffffa5518018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8084e000. Read at address 0x00600018 (0xffff8084e018): 0x00000000 Write at address 0x00600018 (0xffff8084e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba0be000. Read at address 0x00600018 (0xffffba0be018): 0x00000000 Write at address 0x00600018 (0xffffba0be018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff816e8000. Read at address 0x00600018 (0xffff816e8018): 0x00000000 Write at address 0x00600018 (0xffff816e8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96708000. Read at address 0x00600018 (0xffff96708018): 0x00000000 Write at address 0x00600018 (0xffff96708018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb78b3000. Read at address 0x00600018 (0xffffb78b3018): 0x00000000 Write at address 0x00600018 (0xffffb78b3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa0a5a000. Read at address 0x00600018 (0xffffa0a5a018): 0x00000000 Write at address 0x00600018 (0xffffa0a5a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90ceb000. Read at address 0x00600018 (0xffff90ceb018): 0x00000000 Write at address 0x00600018 (0xffff90ceb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffafb1a000. Read at address 0x00600018 (0xffffafb1a018): 0x00000000 Write at address 0x00600018 (0xffffafb1a018): 0x00400040, readback 0x00400040 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 net.ipv6.conf.all.disable_ipv6 = 0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8cf54000. Read at address 0x00600018 (0xffff8cf54018): 0x00000000 Write at address 0x00600018 (0xffff8cf54018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafa94000. Read at address 0x00600018 (0xffffafa94018): 0x00000000 Write at address 0x00600018 (0xffffafa94018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa117000. Read at address 0x00600018 (0xffffaa117018): 0x00000000 Write at address 0x00600018 (0xffffaa117018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa440000. Read at address 0x00600018 (0xffffaa440018): 0x00000000 Write at address 0x00600018 (0xffffaa440018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8083f000. Read at address 0x00600018 (0xffff8083f018): 0x00000000 Write at address 0x00600018 (0xffff8083f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 236 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3be9000. Read at address 0x00600018 (0xffffa3be9018): 0x00000000 Write at address 0x00600018 (0xffffa3be9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb711a000. Read at address 0x00600018 (0xffffb711a018): 0x00000000 Write at address 0x00600018 (0xffffb711a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbaf5f000. Read at address 0x00600018 (0xffffbaf5f018): 0x00000000 Write at address 0x00600018 (0xffffbaf5f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97d28000. Read at address 0x00600018 (0xffff97d28018): 0x00000000 Write at address 0x00600018 (0xffff97d28018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafee4000. Read at address 0x00600018 (0xffffafee4018): 0x00000000 Write at address 0x00600018 (0xffffafee4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91e8e000. Read at address 0x00600018 (0xffff91e8e018): 0x00000000 Write at address 0x00600018 (0xffff91e8e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8a6d3000. Read at address 0x00600018 (0xffff8a6d3018): 0x00000000 Write at address 0x00600018 (0xffff8a6d3018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. ubi1:dml_code is mounted. mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff880b9000. Read at address 0x00600018 (0xffff880b9018): 0x00000000 Write at address 0x00600018 (0xffff880b9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8bbe6000. Read at address 0x00600018 (0xffff8bbe6018): 0x00000000 Write at address 0x00600018 (0xffff8bbe6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8d35b000. Read at address 0x00600018 (0xffff8d35b018): 0x00000000 Write at address 0x00600018 (0xffff8d35b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 net.ipv6.conf.eth0.dad_transmits = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb8909000. Read at address 0x00600018 (0xffffb8909018): 0x00000000 Write at address 0x00600018 (0xffffb8909018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8febf000. Read at address 0x00600018 (0xffff8febf018): 0x00000000 Write at address 0x00600018 (0xffff8febf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb22a0000. Read at address 0x00600018 (0xffffb22a0018): 0x00000000 Write at address 0x00600018 (0xffffb22a0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b9c3000. Read at address 0x00600018 (0xffff9b9c3018): 0x00000000 Write at address 0x00600018 (0xffff9b9c3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7be0000. Read at address 0x00600018 (0xffffa7be0018): 0x00000000 Write at address 0x00600018 (0xffffa7be0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98dc7000. Read at address 0x00600018 (0xffff98dc7018): 0x00000000 Write at address 0x00600018 (0xffff98dc7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb72fa000. Read at address 0x00600018 (0xffffb72fa018): 0x00000000 Write at address 0x00600018 (0xffffb72fa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaaf6e000. Read at address 0x00600018 (0xffffaaf6e018): 0x00000000 Write at address 0x00600018 (0xffffaaf6e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa981d000. Read at address 0x00600018 (0xffffa981d018): 0x00000000 Write at address 0x00600018 (0xffffa981d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff893e2000. Read at address 0x00600018 (0xffff893e2018): 0x00000000 Write at address 0x00600018 (0xffff893e2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff987eb000. Read at address 0x00600018 (0xffff987eb018): 0x00000000 Write at address 0x00600018 (0xffff987eb018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff928d5000. Read at address 0x00600018 (0xffff928d5018): 0x00000000 Write at address 0x00600018 (0xffff928d5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff866a7000. Read at address 0x00600018 (0xffff866a7018): 0x00000000 Write at address 0x00600018 (0xffff866a7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81223000. Read at address 0x00600018 (0xffff81223018): 0x00000000 Write at address 0x00600018 (0xffff81223018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92a2d000. Read at address 0x00600018 (0xffff92a2d018): 0x00000000 Write at address 0x00600018 (0xffff92a2d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa6bbd000. Read at address 0x00600018 (0xffffa6bbd018): 0x00000000 Write at address 0x00600018 (0xffffa6bbd018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92900000. Read at address 0x00600018 (0xffff92900018): 0x00000000 Write at address 0x00600018 (0xffff92900018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff844d2000. Read at address 0x00600018 (0xffff844d2018): 0x00000000 Write at address 0x00600018 (0xffff844d2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c699000. Read at address 0x00600018 (0xffff8c699018): 0x00000000 Write at address 0x00600018 (0xffff8c699018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa6a17000. Read at address 0x00600018 (0xffffa6a17018): 0x00000000 Write at address 0x00600018 (0xffffa6a17018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb84b6000. Read at address 0x00600018 (0xffffb84b6018): 0x00000000 Write at address 0x00600018 (0xffffb84b6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88745000. Read at address 0x00600018 (0xffff88745018): 0x00000000 Write at address 0x00600018 (0xffff88745018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafcbb000. Read at address 0x00600018 (0xffffafcbb018): 0x00000000 Write at address 0x00600018 (0xffffafcbb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffac9d1000. Read at address 0x00600018 (0xffffac9d1018): 0x00000000 Write at address 0x00600018 (0xffffac9d1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8a4de000. Read at address 0x00600018 (0xffff8a4de018): 0x00000000 Write at address 0x00600018 (0xffff8a4de018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6098000. Read at address 0x00600018 (0xffffa6098018): 0x00000000 Write at address 0x00600018 (0xffffa6098018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85d13000. Read at address 0x00600018 (0xffff85d13018): 0x00000000 Write at address 0x00600018 (0xffff85d13018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f8f0000. Read at address 0x00600018 (0xffff9f8f0018): 0x00000000 Write at address 0x00600018 (0xffff9f8f0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa63ae000. Read at address 0x00600018 (0xffffa63ae018): 0x00000000 Write at address 0x00600018 (0xffffa63ae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb95d0000. Read at address 0x00600018 (0xffffb95d0018): 0x00000000 Write at address 0x00600018 (0xffffb95d0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb7ecf000. Read at address 0x00600018 (0xffffb7ecf018): 0x00000000 Write at address 0x00600018 (0xffffb7ecf018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffba269000. Read at address 0x00600018 (0xffffba269018): 0x00000000 Write at address 0x00600018 (0xffffba269018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88bbf000. Read at address 0x00600018 (0xffff88bbf018): 0x00000000 Write at address 0x00600018 (0xffff88bbf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffad4d7000. Read at address 0x00600018 (0xffffad4d7018): 0x00000000 Write at address 0x00600018 (0xffffad4d7018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbafd9000. Read at address 0x00600018 (0xffffbafd9018): 0x00000000 Write at address 0x00600018 (0xffffbafd9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff822ed000. Read at address 0x00600018 (0xffff822ed018): 0x00000000 Write at address 0x00600018 (0xffff822ed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa51cf000. Read at address 0x00600018 (0xffffa51cf018): 0x00000000 Write at address 0x00600018 (0xffffa51cf018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaeabc000. Read at address 0x00600018 (0xffffaeabc018): 0x00000000 Write at address 0x00600018 (0xffffaeabc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff88931000. Read at address 0x00600018 (0xffff88931018): 0x00000000 Write at address 0x00600018 (0xffff88931018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff81c35000. Read at address 0x00600018 (0xffff81c35018): 0x00000000 Write at address 0x00600018 (0xffff81c35018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa7354000. Read at address 0x00600018 (0xffffa7354018): 0x00000000 Write at address 0x00600018 (0xffffa7354018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb557d000. Read at address 0x00600018 (0xffffb557d018): 0x00000000 Write at address 0x00600018 (0xffffb557d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8b70c000. Read at address 0x00600018 (0xffff8b70c018): 0x00000000 Write at address 0x00600018 (0xffff8b70c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbbab0000. Read at address 0x00600018 (0xffffbbab0018): 0x00000000 Write at address 0x00600018 (0xffffbbab0018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8504a000. Read at address 0x00600018 (0xffff8504a018): 0x00000000 Write at address 0x00600018 (0xffff8504a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff897c9000. Read at address 0x00600018 (0xffff897c9018): 0x00000000 Write at address 0x00600018 (0xffff897c9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb70f8000. Read at address 0x00600018 (0xffffb70f8018): 0x00000000 Write at address 0x00600018 (0xffffb70f8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7923000. Read at address 0x00600018 (0xffffa7923018): 0x00000000 Write at address 0x00600018 (0xffffa7923018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb40aa000. Read at address 0x00600018 (0xffffb40aa018): 0x00000000 Write at address 0x00600018 (0xffffb40aa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb0a79000. Read at address 0x00600018 (0xffffb0a79018): 0x00000000 Write at address 0x00600018 (0xffffb0a79018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2a1a000. Read at address 0x00600018 (0xffffb2a1a018): 0x00000000 Write at address 0x00600018 (0xffffb2a1a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff905e1000. Read at address 0x00600018 (0xffff905e1018): 0x00000000 Write at address 0x00600018 (0xffff905e1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffba59e000. Read at address 0x00600018 (0xffffba59e018): 0x00000000 Write at address 0x00600018 (0xffffba59e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d8a7000. Read at address 0x00600018 (0xffff8d8a7018): 0x00000000 Write at address 0x00600018 (0xffff8d8a7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a813000. Read at address 0x00600018 (0xffff9a813018): 0x00000000 Write at address 0x00600018 (0xffff9a813018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6e06000. Read at address 0x00600018 (0xffffa6e06018): 0x00000000 Write at address 0x00600018 (0xffffa6e06018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa003d000. Read at address 0x00600018 (0xffffa003d018): 0x00000000 Write at address 0x00600018 (0xffffa003d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0df7000. Read at address 0x00600018 (0xffffa0df7018): 0x00000000 Write at address 0x00600018 (0xffffa0df7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa939f000. Read at address 0x00600018 (0xffffa939f018): 0x00000000 Write at address 0x00600018 (0xffffa939f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab87e000. Read at address 0x00600018 (0xffffab87e018): 0x00000000 Write at address 0x00600018 (0xffffab87e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb739b000. Read at address 0x00600018 (0xffffb739b018): 0x00000000 Write at address 0x00600018 (0xffffb739b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0470000. Read at address 0x00600018 (0xffffa0470018): 0x00000000 Write at address 0x00600018 (0xffffa0470018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff869de000. Read at address 0x00600018 (0xffff869de018): 0x00000000 Write at address 0x00600018 (0xffff869de018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b813000. Read at address 0x00600018 (0xffff8b813018): 0x00000000 Write at address 0x00600018 (0xffff8b813018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1907000. Read at address 0x00600018 (0xffffa1907018): 0x00000000 Write at address 0x00600018 (0xffffa1907018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ac0b000. Read at address 0x00600018 (0xffff8ac0b018): 0x00000000 Write at address 0x00600018 (0xffff8ac0b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff834b1000. Read at address 0x00600018 (0xffff834b1018): 0x00000000 Write at address 0x00600018 (0xffff834b1018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9d79a000. Read at address 0x00600018 (0xffff9d79a018): 0x00000000 Write at address 0x00600018 (0xffff9d79a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff899f3000. Read at address 0x00600018 (0xffff899f3018): 0x00000000 Write at address 0x00600018 (0xffff899f3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88f28000. Read at address 0x00600018 (0xffff88f28018): 0x00000000 Write at address 0x00600018 (0xffff88f28018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8510a000. Read at address 0x00600018 (0xffff8510a018): 0x00000000 Write at address 0x00600018 (0xffff8510a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8ce68000. Read at address 0x00600018 (0xffff8ce68018): 0x00000000 Write at address 0x00600018 (0xffff8ce68018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffaf24a000. Read at address 0x00600018 (0xffffaf24a018): 0x00000000 Write at address 0x00600018 (0xffffaf24a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8408f000. Read at address 0x00600018 (0xffff8408f018): 0x00000000 Write at address 0x00600018 (0xffff8408f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbdfc3000. Read at address 0x00600018 (0xffffbdfc3018): 0x00000000 Write at address 0x00600018 (0xffffbdfc3018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaef5d000. Read at address 0x00600018 (0xffffaef5d018): 0x00000000 Write at address 0x00600018 (0xffffaef5d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8d05000. Read at address 0x00600018 (0xffffa8d05018): 0x00000000 Write at address 0x00600018 (0xffffa8d05018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa28fd000. Read at address 0x00600018 (0xffffa28fd018): 0x00000000 Write at address 0x00600018 (0xffffa28fd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9768a000. Read at address 0x00600018 (0xffff9768a018): 0x00000000 Write at address 0x00600018 (0xffff9768a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff98674000. Read at address 0x00600018 (0xffff98674018): 0x00000000 Write at address 0x00600018 (0xffff98674018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90452000. Read at address 0x00600018 (0xffff90452018): 0x00000000 Write at address 0x00600018 (0xffff90452018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 220 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffab5ad000. Read at address 0x00600018 (0xffffab5ad018): 0x00000000 Write at address 0x00600018 (0xffffab5ad018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa90de000. Read at address 0x00600018 (0xffffa90de018): 0x00000000 Write at address 0x00600018 (0xffffa90de018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9a161000. Read at address 0x00600018 (0xffff9a161018): 0x00000000 Write at address 0x00600018 (0xffff9a161018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa61a8000. Read at address 0x00600018 (0xffffa61a8018): 0x00000000 Write at address 0x00600018 (0xffffa61a8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbee0a000. Read at address 0x00600018 (0xffffbee0a018): 0x00000000 Write at address 0x00600018 (0xffffbee0a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e08c000. Read at address 0x00600018 (0xffff8e08c018): 0x00000000 Write at address 0x00600018 (0xffff8e08c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91309000. Read at address 0x00600018 (0xffff91309018): 0x00000000 Write at address 0x00600018 (0xffff91309018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82813000. Read at address 0x00600018 (0xffff82813018): 0x00000000 Write at address 0x00600018 (0xffff82813018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb89af000. Read at address 0x00600018 (0xffffb89af018): 0x00000000 Write at address 0x00600018 (0xffffb89af018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff910e7000. Read at address 0x00600018 (0xffff910e7018): 0x00000000 Write at address 0x00600018 (0xffff910e7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a6a3000. Read at address 0x00600018 (0xffff8a6a3018): 0x00000000 Write at address 0x00600018 (0xffff8a6a3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff834e7000. Read at address 0x00600018 (0xffff834e7018): 0x00000000 Write at address 0x00600018 (0xffff834e7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0d90000. Read at address 0x00600018 (0xffffb0d90018): 0x00000000 Write at address 0x00600018 (0xffffb0d90018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fda5000. Read at address 0x00600018 (0xffff8fda5018): 0x00000000 Write at address 0x00600018 (0xffff8fda5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9699c000. Read at address 0x00600018 (0xffff9699c018): 0x00000000 Write at address 0x00600018 (0xffff9699c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb25b7000. Read at address 0x00600018 (0xffffb25b7018): 0x00000000 Write at address 0x00600018 (0xffffb25b7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffae64f000. Read at address 0x00600018 (0xffffae64f018): 0x00000000 Write at address 0x00600018 (0xffffae64f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa33d0000. Read at address 0x00600018 (0xffffa33d0018): 0x00000000 Write at address 0x00600018 (0xffffa33d0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa05d4000. Read at address 0x00600018 (0xffffa05d4018): 0x00000000 Write at address 0x00600018 (0xffffa05d4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a34e000. Read at address 0x00600018 (0xffff8a34e018): 0x00000000 Write at address 0x00600018 (0xffff8a34e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbd75a000. Read at address 0x00600018 (0xffffbd75a018): 0x00000000 Write at address 0x00600018 (0xffffbd75a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9044a000. Read at address 0x00600018 (0xffff9044a018): 0x00000000 Write at address 0x00600018 (0xffff9044a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb6cbe000. Read at address 0x00600018 (0xffffb6cbe018): 0x00000000 Write at address 0x00600018 (0xffffb6cbe018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4ea7000. Read at address 0x00600018 (0xffffb4ea7018): 0x00000000 Write at address 0x00600018 (0xffffb4ea7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83c8f000. Read at address 0x00600018 (0xffff83c8f018): 0x00000000 Write at address 0x00600018 (0xffff83c8f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff93082000. Read at address 0x00600018 (0xffff93082018): 0x00000000 Write at address 0x00600018 (0xffff93082018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbf21000. Read at address 0x00600018 (0xffffbbf21018): 0x00000000 Write at address 0x00600018 (0xffffbbf21018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb375f000. Read at address 0x00600018 (0xffffb375f018): 0x00000000 Write at address 0x00600018 (0xffffb375f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff963c2000. Read at address 0x00600018 (0xffff963c2018): 0x00000000 Write at address 0x00600018 (0xffff963c2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb908000. Read at address 0x00600018 (0xffffbb908018): 0x00000000 Write at address 0x00600018 (0xffffbb908018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi2:animations is mounted. ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbddb9000. Read at address 0x00600018 (0xffffbddb9018): 0x00000000 Write at address 0x00600018 (0xffffbddb9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa2d02000. Read at address 0x00600018 (0xffffa2d02018): 0x00000000 Write at address 0x00600018 (0xffffa2d02018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa94b7000. Read at address 0x00600018 (0xffffa94b7018): 0x00000000 Write at address 0x00600018 (0xffffa94b7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8337e000. Read at address 0x00600018 (0xffff8337e018): 0x00000000 Write at address 0x00600018 (0xffff8337e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9dfdd000. Read at address 0x00600018 (0xffff9dfdd018): 0x00000000 Write at address 0x00600018 (0xffff9dfdd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad37b000. Read at address 0x00600018 (0xffffad37b018): 0x00000000 Write at address 0x00600018 (0xffffad37b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff901f1000. Read at address 0x00600018 (0xffff901f1018): 0x00000000 Write at address 0x00600018 (0xffff901f1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb945c000. Read at address 0x00600018 (0xffffb945c018): 0x00000000 Write at address 0x00600018 (0xffffb945c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9ec0c000. Read at address 0x00600018 (0xffff9ec0c018): 0x00000000 Write at address 0x00600018 (0xffff9ec0c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafe2e000. Read at address 0x00600018 (0xffffafe2e018): 0x00000000 Write at address 0x00600018 (0xffffafe2e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffae3c2000. Read at address 0x00600018 (0xffffae3c2018): 0x00000000 Write at address 0x00600018 (0xffffae3c2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9666a000. Read at address 0x00600018 (0xffff9666a018): 0x00000000 Write at address 0x00600018 (0xffff9666a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa25c000. Read at address 0x00600018 (0xffffaa25c018): 0x00000000 Write at address 0x00600018 (0xffffaa25c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8cf6000. Read at address 0x00600018 (0xffffa8cf6018): 0x00000000 Write at address 0x00600018 (0xffffa8cf6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9371c000. Read at address 0x00600018 (0xffff9371c018): 0x00000000 Write at address 0x00600018 (0xffff9371c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbea60000. Read at address 0x00600018 (0xffffbea60018): 0x00000000 Write at address 0x00600018 (0xffffbea60018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffad402000. Read at address 0x00600018 (0xffffad402018): 0x00000000 Write at address 0x00600018 (0xffffad402018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6477000. Read at address 0x00600018 (0xffffb6477018): 0x00000000 Write at address 0x00600018 (0xffffb6477018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e006000. Read at address 0x00600018 (0xffff9e006018): 0x00000000 Write at address 0x00600018 (0xffff9e006018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6ef5000. Read at address 0x00600018 (0xffffb6ef5018): 0x00000000 Write at address 0x00600018 (0xffffb6ef5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87f4b000. Read at address 0x00600018 (0xffff87f4b018): 0x00000000 Write at address 0x00600018 (0xffff87f4b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad91d000. Read at address 0x00600018 (0xffffad91d018): 0x00000000 Write at address 0x00600018 (0xffffad91d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff91388000. Read at address 0x00600018 (0xffff91388018): 0x00000000 Write at address 0x00600018 (0xffff91388018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff95ead000. Read at address 0x00600018 (0xffff95ead018): 0x00000000 Write at address 0x00600018 (0xffff95ead018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa662c000. Read at address 0x00600018 (0xffffa662c018): 0x00000000 Write at address 0x00600018 (0xffffa662c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8d525000. Read at address 0x00600018 (0xffff8d525018): 0x00000000 Write at address 0x00600018 (0xffff8d525018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e8c7000. Read at address 0x00600018 (0xffff8e8c7018): 0x00000000 Write at address 0x00600018 (0xffff8e8c7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff987d8000. Read at address 0x00600018 (0xffff987d8018): 0x00000000 Write at address 0x00600018 (0xffff987d8018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fb71000. Read at address 0x00600018 (0xffff8fb71018): 0x00000000 Write at address 0x00600018 (0xffff8fb71018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83695000. Read at address 0x00600018 (0xffff83695018): 0x00000000 Write at address 0x00600018 (0xffff83695018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba52b000. Read at address 0x00600018 (0xffffba52b018): 0x00000000 Write at address 0x00600018 (0xffffba52b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff91fff000. Read at address 0x00600018 (0xffff91fff018): 0x00000000 Write at address 0x00600018 (0xffff91fff018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4c2a000. Read at address 0x00600018 (0xffffb4c2a018): 0x00000000 Write at address 0x00600018 (0xffffb4c2a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb38b2000. Read at address 0x00600018 (0xffffb38b2018): 0x00000000 Write at address 0x00600018 (0xffffb38b2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9050000. Read at address 0x00600018 (0xffffb9050018): 0x00000000 Write at address 0x00600018 (0xffffb9050018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9017e000. Read at address 0x00600018 (0xffff9017e018): 0x00000000 Write at address 0x00600018 (0xffff9017e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97f91000. Read at address 0x00600018 (0xffff97f91018): 0x00000000 Write at address 0x00600018 (0xffff97f91018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d661000. Read at address 0x00600018 (0xffff8d661018): 0x00000000 Write at address 0x00600018 (0xffff8d661018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff95ee2000. Read at address 0x00600018 (0xffff95ee2018): 0x00000000 Write at address 0x00600018 (0xffff95ee2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6148000. Read at address 0x00600018 (0xffffb6148018): 0x00000000 Write at address 0x00600018 (0xffffb6148018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85f21000. Read at address 0x00600018 (0xffff85f21018): 0x00000000 Write at address 0x00600018 (0xffff85f21018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7a6b000. Read at address 0x00600018 (0xffffb7a6b018): 0x00000000 Write at address 0x00600018 (0xffffb7a6b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1642000. Read at address 0x00600018 (0xffffb1642018): 0x00000000 Write at address 0x00600018 (0xffffb1642018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92010000. Read at address 0x00600018 (0xffff92010018): 0x00000000 Write at address 0x00600018 (0xffff92010018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91ebe000. Read at address 0x00600018 (0xffff91ebe018): 0x00000000 Write at address 0x00600018 (0xffff91ebe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe986000. Read at address 0x00600018 (0xffffbe986018): 0x00000000 Write at address 0x00600018 (0xffffbe986018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6e79000. Read at address 0x00600018 (0xffffb6e79018): 0x00000000 Write at address 0x00600018 (0xffffb6e79018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff995a6000. Read at address 0x00600018 (0xffff995a6018): 0x00000000 Write at address 0x00600018 (0xffff995a6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f093000. Read at address 0x00600018 (0xffff9f093018): 0x00000000 Write at address 0x00600018 (0xffff9f093018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84015000. Read at address 0x00600018 (0xffff84015018): 0x00000000 Write at address 0x00600018 (0xffff84015018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff81a21000. Read at address 0x00600018 (0xffff81a21018): 0x00000000 Write at address 0x00600018 (0xffff81a21018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8de63000. Read at address 0x00600018 (0xffff8de63018): 0x00000000 Write at address 0x00600018 (0xffff8de63018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa075e000. Read at address 0x00600018 (0xffffa075e018): 0x00000000 Write at address 0x00600018 (0xffffa075e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96509000. Read at address 0x00600018 (0xffff96509018): 0x00000000 Write at address 0x00600018 (0xffff96509018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f86a000. Read at address 0x00600018 (0xffff8f86a018): 0x00000000 Write at address 0x00600018 (0xffff8f86a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84ca7000. Read at address 0x00600018 (0xffff84ca7018): 0x00000000 Write at address 0x00600018 (0xffff84ca7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d437000. Read at address 0x00600018 (0xffff9d437018): 0x00000000 Write at address 0x00600018 (0xffff9d437018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff821f0000. Read at address 0x00600018 (0xffff821f0018): 0x00000000 Write at address 0x00600018 (0xffff821f0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96345000. Read at address 0x00600018 (0xffff96345018): 0x00000000 Write at address 0x00600018 (0xffff96345018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98933000. Read at address 0x00600018 (0xffff98933018): 0x00000000 Write at address 0x00600018 (0xffff98933018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb140c000. Read at address 0x00600018 (0xffffb140c018): 0x00000000 Write at address 0x00600018 (0xffffb140c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffae3e3000. Read at address 0x00600018 (0xffffae3e3018): 0x00000000 Write at address 0x00600018 (0xffffae3e3018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff90bc7000. Read at address 0x00600018 (0xffff90bc7018): 0x00000000 Write at address 0x00600018 (0xffff90bc7018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa4d4000. Read at address 0x00600018 (0xffffaa4d4018): 0x00000000 Write at address 0x00600018 (0xffffaa4d4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf536000. Read at address 0x00600018 (0xffffaf536018): 0x00000000 Write at address 0x00600018 (0xffffaf536018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff84b7a000. Read at address 0x00600018 (0xffff84b7a018): 0x00000000 Write at address 0x00600018 (0xffff84b7a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff910a1000. Read at address 0x00600018 (0xffff910a1018): 0x00000000 Write at address 0x00600018 (0xffff910a1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb0c35000. Read at address 0x00600018 (0xffffb0c35018): 0x00000000 Write at address 0x00600018 (0xffffb0c35018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb8fdb000. Read at address 0x00600018 (0xffffb8fdb018): 0x00000000 Write at address 0x00600018 (0xffffb8fdb018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8e214000. Read at address 0x00600018 (0xffff8e214018): 0x00000000 Write at address 0x00600018 (0xffff8e214018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff879bb000. Read at address 0x00600018 (0xffff879bb018): 0x00000000 Write at address 0x00600018 (0xffff879bb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89521000. Read at address 0x00600018 (0xffff89521018): 0x00000000 Write at address 0x00600018 (0xffff89521018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf798000. Read at address 0x00600018 (0xffffaf798018): 0x00000000 Write at address 0x00600018 (0xffffaf798018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff905d0000. Read at address 0x00600018 (0xffff905d0018): 0x00000000 Write at address 0x00600018 (0xffff905d0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa61dc000. Read at address 0x00600018 (0xffffa61dc018): 0x00000000 Write at address 0x00600018 (0xffffa61dc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff904f9000. Read at address 0x00600018 (0xffff904f9018): 0x00000000 Write at address 0x00600018 (0xffff904f9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a5e1000. Read at address 0x00600018 (0xffff9a5e1018): 0x00000000 Write at address 0x00600018 (0xffff9a5e1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81177000. Read at address 0x00600018 (0xffff81177018): 0x00000000 Write at address 0x00600018 (0xffff81177018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff897dc000. Read at address 0x00600018 (0xffff897dc018): 0x00000000 Write at address 0x00600018 (0xffff897dc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffabd5b000. Read at address 0x00600018 (0xffffabd5b018): 0x00000000 Write at address 0x00600018 (0xffffabd5b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99c99000. Read at address 0x00600018 (0xffff99c99018): 0x00000000 Write at address 0x00600018 (0xffff99c99018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82232000. Read at address 0x00600018 (0xffff82232018): 0x00000000 Write at address 0x00600018 (0xffff82232018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b1e0000. Read at address 0x00600018 (0xffff9b1e0018): 0x00000000 Write at address 0x00600018 (0xffff9b1e0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8a2bb000. Read at address 0x00600018 (0xffff8a2bb018): 0x00000000 Write at address 0x00600018 (0xffff8a2bb018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb81bd000. Read at address 0x00600018 (0xffffb81bd018): 0x00000000 Write at address 0x00600018 (0xffffb81bd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2541000. Read at address 0x00600018 (0xffffa2541018): 0x00000000 Write at address 0x00600018 (0xffffa2541018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff84c20000. Read at address 0x00600018 (0xffff84c20018): 0x00000000 Write at address 0x00600018 (0xffff84c20018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbed1000. Read at address 0x00600018 (0xffffbbed1018): 0x00000000 Write at address 0x00600018 (0xffffbbed1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80373000. Read at address 0x00600018 (0xffff80373018): 0x00000000 Write at address 0x00600018 (0xffff80373018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1b09000. Read at address 0x00600018 (0xffffb1b09018): 0x00000000 Write at address 0x00600018 (0xffffb1b09018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb36a7000. Read at address 0x00600018 (0xffffb36a7018): 0x00000000 Write at address 0x00600018 (0xffffb36a7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff91605000. Read at address 0x00600018 (0xffff91605018): 0x00000000 Write at address 0x00600018 (0xffff91605018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c6ea000. Read at address 0x00600018 (0xffff9c6ea018): 0x00000000 Write at address 0x00600018 (0xffff9c6ea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9074000. Read at address 0x00600018 (0xffffb9074018): 0x00000000 Write at address 0x00600018 (0xffffb9074018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb4c29000. Read at address 0x00600018 (0xffffb4c29018): 0x00000000 Write at address 0x00600018 (0xffffb4c29018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa1798000. Read at address 0x00600018 (0xffffa1798018): 0x00000000 Write at address 0x00600018 (0xffffa1798018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8be98000. Read at address 0x00600018 (0xffff8be98018): 0x00000000 Write at address 0x00600018 (0xffff8be98018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8046a000. Read at address 0x00600018 (0xffff8046a018): 0x00000000 Write at address 0x00600018 (0xffff8046a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88a2e000. Read at address 0x00600018 (0xffff88a2e018): 0x00000000 Write at address 0x00600018 (0xffff88a2e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff86b6c000. Read at address 0x00600018 (0xffff86b6c018): 0x00000000 Write at address 0x00600018 (0xffff86b6c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaee66000. Read at address 0x00600018 (0xffffaee66018): 0x00000000 Write at address 0x00600018 (0xffffaee66018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbab90000. Read at address 0x00600018 (0xffffbab90018): 0x00000000 Write at address 0x00600018 (0xffffbab90018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbe358000. Read at address 0x00600018 (0xffffbe358018): 0x00000000 Write at address 0x00600018 (0xffffbe358018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8772e000. Read at address 0x00600018 (0xffff8772e018): 0x00000000 Write at address 0x00600018 (0xffff8772e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff98422000. Read at address 0x00600018 (0xffff98422018): 0x00000000 Write at address 0x00600018 (0xffff98422018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffba49f000. Read at address 0x00600018 (0xffffba49f018): 0x00000000 Write at address 0x00600018 (0xffffba49f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac613000. Read at address 0x00600018 (0xffffac613018): 0x00000000 Write at address 0x00600018 (0xffffac613018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa277e000. Read at address 0x00600018 (0xffffa277e018): 0x00000000 Write at address 0x00600018 (0xffffa277e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99fc7000. Read at address 0x00600018 (0xffff99fc7018): 0x00000000 Write at address 0x00600018 (0xffff99fc7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff89122000. Read at address 0x00600018 (0xffff89122018): 0x00000000 Write at address 0x00600018 (0xffff89122018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b839000. Read at address 0x00600018 (0xffff9b839018): 0x00000000 Write at address 0x00600018 (0xffff9b839018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff822ca000. Read at address 0x00600018 (0xffff822ca018): 0x00000000 Write at address 0x00600018 (0xffff822ca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9155d000. Read at address 0x00600018 (0xffff9155d018): 0x00000000 Write at address 0x00600018 (0xffff9155d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84f18000. Read at address 0x00600018 (0xffff84f18018): 0x00000000 Write at address 0x00600018 (0xffff84f18018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff887e8000. Read at address 0x00600018 (0xffff887e8018): 0x00000000 Write at address 0x00600018 (0xffff887e8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa97bc000. Read at address 0x00600018 (0xffffa97bc018): 0x00000000 Write at address 0x00600018 (0xffffa97bc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffacc93000. Read at address 0x00600018 (0xffffacc93018): 0x00000000 Write at address 0x00600018 (0xffffacc93018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9dee0000. Read at address 0x00600018 (0xffff9dee0018): 0x00000000 Write at address 0x00600018 (0xffff9dee0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 /dev/mem opened. Memory mapped at address 0xffff89b49000. Read at address 0x00600018 (0xffff89b49018): 0x00000000 Write at address 0x00600018 (0xffff89b49018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6f6b000. Read at address 0x00600018 (0xffffb6f6b018): 0x00000000 Write at address 0x00600018 (0xffffb6f6b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4d89000. Read at address 0x00600018 (0xffffa4d89018): 0x00000000 Write at address 0x00600018 (0xffffa4d89018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d8f9000. Read at address 0x00600018 (0xffff9d8f9018): 0x00000000 Write at address 0x00600018 (0xffff9d8f9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb744000. Read at address 0x00600018 (0xffffbb744018): 0x00000000 Write at address 0x00600018 (0xffffbb744018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb94cf000. Read at address 0x00600018 (0xffffb94cf018): 0x00000000 Write at address 0x00600018 (0xffffb94cf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8237b000. Read at address 0x00600018 (0xffff8237b018): 0x00000000 Write at address 0x00600018 (0xffff8237b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff902ec000. Read at address 0x00600018 (0xffff902ec018): 0x00000000 Write at address 0x00600018 (0xffff902ec018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbbe0000. Read at address 0x00600018 (0xffffbbbe0018): 0x00000000 Write at address 0x00600018 (0xffffbbbe0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbe5f7000. Read at address 0x00600018 (0xffffbe5f7018): 0x00000000 Write at address 0x00600018 (0xffffbe5f7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85468000. Read at address 0x00600018 (0xffff85468018): 0x00000000 Write at address 0x00600018 (0xffff85468018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff822d9000. Read at address 0x00600018 (0xffff822d9018): 0x00000000 Write at address 0x00600018 (0xffff822d9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8feb3000. Read at address 0x00600018 (0xffff8feb3018): 0x00000000 Write at address 0x00600018 (0xffff8feb3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa5f25000. Read at address 0x00600018 (0xffffa5f25018): 0x00000000 Write at address 0x00600018 (0xffffa5f25018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82747000. Read at address 0x00600018 (0xffff82747018): 0x00000000 Write at address 0x00600018 (0xffff82747018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff93463000. Read at address 0x00600018 (0xffff93463018): 0x00000000 Write at address 0x00600018 (0xffff93463018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff857a2000. Read at address 0x00600018 (0xffff857a2018): 0x00000000 Write at address 0x00600018 (0xffff857a2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1d1f000. Read at address 0x00600018 (0xffffa1d1f018): 0x00000000 Write at address 0x00600018 (0xffffa1d1f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82df3000. Read at address 0x00600018 (0xffff82df3018): 0x00000000 Write at address 0x00600018 (0xffff82df3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff807bb000. Read at address 0x00600018 (0xffff807bb018): 0x00000000 Write at address 0x00600018 (0xffff807bb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a545000. Read at address 0x00600018 (0xffff9a545018): 0x00000000 Write at address 0x00600018 (0xffff9a545018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8acaf000. Read at address 0x00600018 (0xffff8acaf018): 0x00000000 Write at address 0x00600018 (0xffff8acaf018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0814000. Read at address 0x00600018 (0xffffb0814018): 0x00000000 Write at address 0x00600018 (0xffffb0814018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9ef50000. Read at address 0x00600018 (0xffff9ef50018): 0x00000000 Write at address 0x00600018 (0xffff9ef50018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0393000. Read at address 0x00600018 (0xffffb0393018): 0x00000000 Write at address 0x00600018 (0xffffb0393018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83a12000. Read at address 0x00600018 (0xffff83a12018): 0x00000000 Write at address 0x00600018 (0xffff83a12018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98923000. Read at address 0x00600018 (0xffff98923018): 0x00000000 Write at address 0x00600018 (0xffff98923018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3ecb000. Read at address 0x00600018 (0xffffa3ecb018): 0x00000000 Write at address 0x00600018 (0xffffa3ecb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb122b000. Read at address 0x00600018 (0xffffb122b018): 0x00000000 Write at address 0x00600018 (0xffffb122b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff81793000. Read at address 0x00600018 (0xffff81793018): 0x00000000 Write at address 0x00600018 (0xffff81793018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97f47000. Read at address 0x00600018 (0xffff97f47018): 0x00000000 Write at address 0x00600018 (0xffff97f47018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa64b8000. Read at address 0x00600018 (0xffffa64b8018): 0x00000000 Write at address 0x00600018 (0xffffa64b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9115b000. Read at address 0x00600018 (0xffff9115b018): 0x00000000 Write at address 0x00600018 (0xffff9115b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94559000. Read at address 0x00600018 (0xffff94559018): 0x00000000 Write at address 0x00600018 (0xffff94559018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabe68000. Read at address 0x00600018 (0xffffabe68018): 0x00000000 Write at address 0x00600018 (0xffffabe68018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a4d0000. Read at address 0x00600018 (0xffff9a4d0018): 0x00000000 Write at address 0x00600018 (0xffff9a4d0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa0fb7000. Read at address 0x00600018 (0xffffa0fb7018): 0x00000000 Write at address 0x00600018 (0xffffa0fb7018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf343000. Read at address 0x00600018 (0xffffaf343018): 0x00000000 Write at address 0x00600018 (0xffffaf343018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff88b6d000. Read at address 0x00600018 (0xffff88b6d018): 0x00000000 Write at address 0x00600018 (0xffff88b6d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2086000. Read at address 0x00600018 (0xffffa2086018): 0x00000000 Write at address 0x00600018 (0xffffa2086018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c4ca000. Read at address 0x00600018 (0xffff9c4ca018): 0x00000000 Write at address 0x00600018 (0xffff9c4ca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e856000. Read at address 0x00600018 (0xffff8e856018): 0x00000000 Write at address 0x00600018 (0xffff8e856018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaecf8000. Read at address 0x00600018 (0xffffaecf8018): 0x00000000 Write at address 0x00600018 (0xffffaecf8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb57a4000. Read at address 0x00600018 (0xffffb57a4018): 0x00000000 Write at address 0x00600018 (0xffffb57a4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba0b6000. Read at address 0x00600018 (0xffffba0b6018): 0x00000000 Write at address 0x00600018 (0xffffba0b6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9a7b8000. Read at address 0x00600018 (0xffff9a7b8018): 0x00000000 Write at address 0x00600018 (0xffff9a7b8018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff92647000. Read at address 0x00600018 (0xffff92647018): 0x00000000 Write at address 0x00600018 (0xffff92647018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9ddd000. Read at address 0x00600018 (0xffffa9ddd018): 0x00000000 Write at address 0x00600018 (0xffffa9ddd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff86a1c000. Read at address 0x00600018 (0xffff86a1c018): 0x00000000 Write at address 0x00600018 (0xffff86a1c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb8df2000. Read at address 0x00600018 (0xffffb8df2018): 0x00000000 Write at address 0x00600018 (0xffffb8df2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff92127000. Read at address 0x00600018 (0xffff92127018): 0x00000000 Write at address 0x00600018 (0xffff92127018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff946c2000. Read at address 0x00600018 (0xffff946c2018): 0x00000000 Write at address 0x00600018 (0xffff946c2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82f95000. Read at address 0x00600018 (0xffff82f95018): 0x00000000 Write at address 0x00600018 (0xffff82f95018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa14ad000. Read at address 0x00600018 (0xffffa14ad018): 0x00000000 Write at address 0x00600018 (0xffffa14ad018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1bc7000. Read at address 0x00600018 (0xffffb1bc7018): 0x00000000 Write at address 0x00600018 (0xffffb1bc7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaba32000. Read at address 0x00600018 (0xffffaba32018): 0x00000000 Write at address 0x00600018 (0xffffaba32018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9d7c000. Read at address 0x00600018 (0xffffb9d7c018): 0x00000000 Write at address 0x00600018 (0xffffb9d7c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a8ea000. Read at address 0x00600018 (0xffff9a8ea018): 0x00000000 Write at address 0x00600018 (0xffff9a8ea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff886f5000. Read at address 0x00600018 (0xffff886f5018): 0x00000000 Write at address 0x00600018 (0xffff886f5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8b608000. Read at address 0x00600018 (0xffff8b608018): 0x00000000 Write at address 0x00600018 (0xffff8b608018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbb88b000. Read at address 0x00600018 (0xffffbb88b018): 0x00000000 Write at address 0x00600018 (0xffffbb88b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa0c1a000. Read at address 0x00600018 (0xffffa0c1a018): 0x00000000 Write at address 0x00600018 (0xffffa0c1a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb1dc3000. Read at address 0x00600018 (0xffffb1dc3018): 0x00000000 Write at address 0x00600018 (0xffffb1dc3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8fd33000. Read at address 0x00600018 (0xffff8fd33018): 0x00000000 Write at address 0x00600018 (0xffff8fd33018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbb31a000. Read at address 0x00600018 (0xffffbb31a018): 0x00000000 Write at address 0x00600018 (0xffffbb31a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb3fbe000. Read at address 0x00600018 (0xffffb3fbe018): 0x00000000 Write at address 0x00600018 (0xffffb3fbe018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1e30000. Read at address 0x00600018 (0xffffb1e30018): 0x00000000 Write at address 0x00600018 (0xffffb1e30018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9d448000. Read at address 0x00600018 (0xffff9d448018): 0x00000000 Write at address 0x00600018 (0xffff9d448018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaa3f2000. Read at address 0x00600018 (0xffffaa3f2018): 0x00000000 Write at address 0x00600018 (0xffffaa3f2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff859c9000. Read at address 0x00600018 (0xffff859c9018): 0x00000000 Write at address 0x00600018 (0xffff859c9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8a573000. Read at address 0x00600018 (0xffff8a573018): 0x00000000 Write at address 0x00600018 (0xffff8a573018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9a350000. Read at address 0x00600018 (0xffff9a350018): 0x00000000 Write at address 0x00600018 (0xffff9a350018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6252000. Read at address 0x00600018 (0xffffa6252018): 0x00000000 Write at address 0x00600018 (0xffffa6252018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9e3ed000. Read at address 0x00600018 (0xffff9e3ed018): 0x00000000 Write at address 0x00600018 (0xffff9e3ed018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9cd72000. Read at address 0x00600018 (0xffff9cd72018): 0x00000000 Write at address 0x00600018 (0xffff9cd72018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8db16000. Read at address 0x00600018 (0xffff8db16018): 0x00000000 Write at address 0x00600018 (0xffff8db16018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba465000. Read at address 0x00600018 (0xffffba465018): 0x00000000 Write at address 0x00600018 (0xffffba465018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff83e09000. Read at address 0x00600018 (0xffff83e09018): 0x00000000 Write at address 0x00600018 (0xffff83e09018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa018e000. Read at address 0x00600018 (0xffffa018e018): 0x00000000 Write at address 0x00600018 (0xffffa018e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4389000. Read at address 0x00600018 (0xffffa4389018): 0x00000000 Write at address 0x00600018 (0xffffa4389018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff827eb000. Read at address 0x00600018 (0xffff827eb018): 0x00000000 Write at address 0x00600018 (0xffff827eb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff88e81000. Read at address 0x00600018 (0xffff88e81018): 0x00000000 Write at address 0x00600018 (0xffff88e81018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb6e56000. Read at address 0x00600018 (0xffffb6e56018): 0x00000000 Write at address 0x00600018 (0xffffb6e56018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b97f000. Read at address 0x00600018 (0xffff9b97f018): 0x00000000 Write at address 0x00600018 (0xffff9b97f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff80a68000. Read at address 0x00600018 (0xffff80a68018): 0x00000000 Write at address 0x00600018 (0xffff80a68018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8839c000. Read at address 0x00600018 (0xffff8839c018): 0x00000000 Write at address 0x00600018 (0xffff8839c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb15e000. Read at address 0x00600018 (0xffffbb15e018): 0x00000000 Write at address 0x00600018 (0xffffbb15e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2190000. Read at address 0x00600018 (0xffffb2190018): 0x00000000 Write at address 0x00600018 (0xffffb2190018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d067000. Read at address 0x00600018 (0xffff8d067018): 0x00000000 Write at address 0x00600018 (0xffff8d067018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8fba2000. Read at address 0x00600018 (0xffff8fba2018): 0x00000000 Write at address 0x00600018 (0xffff8fba2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa18d2000. Read at address 0x00600018 (0xffffa18d2018): 0x00000000 Write at address 0x00600018 (0xffffa18d2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb246e000. Read at address 0x00600018 (0xffffb246e018): 0x00000000 Write at address 0x00600018 (0xffffb246e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8164a000. Read at address 0x00600018 (0xffff8164a018): 0x00000000 Write at address 0x00600018 (0xffff8164a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff94efd000. Read at address 0x00600018 (0xffff94efd018): 0x00000000 Write at address 0x00600018 (0xffff94efd018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb14ae000. Read at address 0x00600018 (0xffffb14ae018): 0x00000000 Write at address 0x00600018 (0xffffb14ae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ac51000. Read at address 0x00600018 (0xffff8ac51018): 0x00000000 Write at address 0x00600018 (0xffff8ac51018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a7aa000. Read at address 0x00600018 (0xffff9a7aa018): 0x00000000 Write at address 0x00600018 (0xffff9a7aa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8db9a000. Read at address 0x00600018 (0xffff8db9a018): 0x00000000 Write at address 0x00600018 (0xffff8db9a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3c67000. Read at address 0x00600018 (0xffffa3c67018): 0x00000000 Write at address 0x00600018 (0xffffa3c67018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff88e10000. Read at address 0x00600018 (0xffff88e10018): 0x00000000 Write at address 0x00600018 (0xffff88e10018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8342e000. Read at address 0x00600018 (0xffff8342e018): 0x00000000 Write at address 0x00600018 (0xffff8342e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8526e000. Read at address 0x00600018 (0xffff8526e018): 0x00000000 Write at address 0x00600018 (0xffff8526e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1348000. Read at address 0x00600018 (0xffffa1348018): 0x00000000 Write at address 0x00600018 (0xffffa1348018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8a097000. Read at address 0x00600018 (0xffff8a097018): 0x00000000 Write at address 0x00600018 (0xffff8a097018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbdc2f000. Read at address 0x00600018 (0xffffbdc2f018): 0x00000000 Write at address 0x00600018 (0xffffbdc2f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8bcf2000. Read at address 0x00600018 (0xffff8bcf2018): 0x00000000 Write at address 0x00600018 (0xffff8bcf2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff90fdd000. Read at address 0x00600018 (0xffff90fdd018): 0x00000000 Write at address 0x00600018 (0xffff90fdd018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff85678000. Read at address 0x00600018 (0xffff85678018): 0x00000000 Write at address 0x00600018 (0xffff85678018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbbc3000. Read at address 0x00600018 (0xffffbbbc3018): 0x00000000 Write at address 0x00600018 (0xffffbbbc3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff7fa63000. Read at address 0x00600018 (0xffff7fa63018): 0x00000000 Write at address 0x00600018 (0xffff7fa63018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89041000. Read at address 0x00600018 (0xffff89041018): 0x00000000 Write at address 0x00600018 (0xffff89041018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1fe0000. Read at address 0x00600018 (0xffffa1fe0018): 0x00000000 Write at address 0x00600018 (0xffffa1fe0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff850ed000. Read at address 0x00600018 (0xffff850ed018): 0x00000000 Write at address 0x00600018 (0xffff850ed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff86aa2000. Read at address 0x00600018 (0xffff86aa2018): 0x00000000 Write at address 0x00600018 (0xffff86aa2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92ada000. Read at address 0x00600018 (0xffff92ada018): 0x00000000 Write at address 0x00600018 (0xffff92ada018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9185000. Read at address 0x00600018 (0xffffb9185018): 0x00000000 Write at address 0x00600018 (0xffffb9185018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffabaa1000. Read at address 0x00600018 (0xffffabaa1018): 0x00000000 Write at address 0x00600018 (0xffffabaa1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84aab000. Read at address 0x00600018 (0xffff84aab018): 0x00000000 Write at address 0x00600018 (0xffff84aab018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6c5e000. Read at address 0x00600018 (0xffffa6c5e018): 0x00000000 Write at address 0x00600018 (0xffffa6c5e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff967e4000. Read at address 0x00600018 (0xffff967e4018): 0x00000000 Write at address 0x00600018 (0xffff967e4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Memory mapped at address 0xffff96607000. Read at address 0x00600018 (0xffff96607018): 0x00000000 Write at address 0x00600018 (0xffff96607018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7762000. Read at address 0x00600018 (0xffffa7762018): 0x00000000 Write at address 0x00600018 (0xffffa7762018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff80ac4000. Read at address 0x00600018 (0xffff80ac4018): 0x00000000 Write at address 0x00600018 (0xffff80ac4018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8599c000. Read at address 0x00600018 (0xffff8599c018): 0x00000000 Write at address 0x00600018 (0xffff8599c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa0c57000. Read at address 0x00600018 (0xffffa0c57018): 0x00000000 Write at address 0x00600018 (0xffffa0c57018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbcc2e000. Read at address 0x00600018 (0xffffbcc2e018): 0x00000000 Write at address 0x00600018 (0xffffbcc2e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb87f7000. Read at address 0x00600018 (0xffffb87f7018): 0x00000000 Write at address 0x00600018 (0xffffb87f7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb391e000. Read at address 0x00600018 (0xffffb391e018): 0x00000000 Write at address 0x00600018 (0xffffb391e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadeca000. Read at address 0x00600018 (0xffffadeca018): 0x00000000 Write at address 0x00600018 (0xffffadeca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f852000. Read at address 0x00600018 (0xffff9f852018): 0x00000000 Write at address 0x00600018 (0xffff9f852018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa1c24000. Read at address 0x00600018 (0xffffa1c24018): 0x00000000 Write at address 0x00600018 (0xffffa1c24018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2be8000. Read at address 0x00600018 (0xffffa2be8018): 0x00000000 Write at address 0x00600018 (0xffffa2be8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb966f000. Read at address 0x00600018 (0xffffb966f018): 0x00000000 Write at address 0x00600018 (0xffffb966f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ca7b000. Read at address 0x00600018 (0xffff8ca7b018): 0x00000000 Write at address 0x00600018 (0xffff8ca7b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb7148000. Read at address 0x00600018 (0xffffb7148018): 0x00000000 Write at address 0x00600018 (0xffffb7148018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6a49000. Read at address 0x00600018 (0xffffb6a49018): 0x00000000 Write at address 0x00600018 (0xffffb6a49018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff960c0000. Read at address 0x00600018 (0xffff960c0018): 0x00000000 Write at address 0x00600018 (0xffff960c0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb42bf000. Read at address 0x00600018 (0xffffb42bf018): 0x00000000 Write at address 0x00600018 (0xffffb42bf018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98ae4000. Read at address 0x00600018 (0xffff98ae4018): 0x00000000 Write at address 0x00600018 (0xffff98ae4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8697000. Read at address 0x00600018 (0xffffb8697018): 0x00000000 Write at address 0x00600018 (0xffffb8697018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Memory mapped at address 0xffffbe608000. Read at address 0x00600018 (0xffffbe608018): 0x00000000 Write at address 0x00600018 (0xffffbe608018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbc822000. Read at address 0x00600018 (0xffffbc822018): 0x00000000 Write at address 0x00600018 (0xffffbc822018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ed0c000. Read at address 0x00600018 (0xffff8ed0c018): 0x00000000 Write at address 0x00600018 (0xffff8ed0c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff92746000. Read at address 0x00600018 (0xffff92746018): 0x00000000 Write at address 0x00600018 (0xffff92746018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff94d93000. Read at address 0x00600018 (0xffff94d93018): 0x00000000 Write at address 0x00600018 (0xffff94d93018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93c42000. Read at address 0x00600018 (0xffff93c42018): 0x00000000 Write at address 0x00600018 (0xffff93c42018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb1c91000. Read at address 0x00600018 (0xffffb1c91018): 0x00000000 Write at address 0x00600018 (0xffffb1c91018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a63c000. Read at address 0x00600018 (0xffff9a63c018): 0x00000000 Write at address 0x00600018 (0xffff9a63c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1f6c000. Read at address 0x00600018 (0xffffb1f6c018): 0x00000000 Write at address 0x00600018 (0xffffb1f6c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98c5c000. Read at address 0x00600018 (0xffff98c5c018): 0x00000000 Write at address 0x00600018 (0xffff98c5c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa938b000. Read at address 0x00600018 (0xffffa938b018): 0x00000000 Write at address 0x00600018 (0xffffa938b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2534000. Read at address 0x00600018 (0xffffa2534018): 0x00000000 Write at address 0x00600018 (0xffffa2534018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9f4e3000. Read at address 0x00600018 (0xffff9f4e3018): 0x00000000 Write at address 0x00600018 (0xffff9f4e3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff978f5000. Read at address 0x00600018 (0xffff978f5018): 0x00000000 Write at address 0x00600018 (0xffff978f5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91b79000. Read at address 0x00600018 (0xffff91b79018): 0x00000000 Write at address 0x00600018 (0xffff91b79018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83859000. Read at address 0x00600018 (0xffff83859018): 0x00000000 Write at address 0x00600018 (0xffff83859018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached ubi0:animations is mounted. mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff952c1000. Read at address 0x00600018 (0xffff952c1018): 0x00000000 Write at address 0x00600018 (0xffff952c1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb577c000. Read at address 0x00600018 (0xffffb577c018): 0x00000000 Write at address 0x00600018 (0xffffb577c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85b98000. Read at address 0x00600018 (0xffff85b98018): 0x00000000 Write at address 0x00600018 (0xffff85b98018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8f0da000. Read at address 0x00600018 (0xffff8f0da018): 0x00000000 Write at address 0x00600018 (0xffff8f0da018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87618000. Read at address 0x00600018 (0xffff87618018): 0x00000000 Write at address 0x00600018 (0xffff87618018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b8bb000. Read at address 0x00600018 (0xffff8b8bb018): 0x00000000 Write at address 0x00600018 (0xffff8b8bb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c0f0000. Read at address 0x00600018 (0xffff8c0f0018): 0x00000000 Write at address 0x00600018 (0xffff8c0f0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe7e1000. Read at address 0x00600018 (0xffffbe7e1018): 0x00000000 Write at address 0x00600018 (0xffffbe7e1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa826b000. Read at address 0x00600018 (0xffffa826b018): 0x00000000 Write at address 0x00600018 (0xffffa826b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83d8c000. Read at address 0x00600018 (0xffff83d8c018): 0x00000000 Write at address 0x00600018 (0xffff83d8c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa522f000. Read at address 0x00600018 (0xffffa522f018): 0x00000000 Write at address 0x00600018 (0xffffa522f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87bb4000. Read at address 0x00600018 (0xffff87bb4018): 0x00000000 Write at address 0x00600018 (0xffff87bb4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bf64000. Read at address 0x00600018 (0xffff9bf64018): 0x00000000 Write at address 0x00600018 (0xffff9bf64018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff81ee5000. Read at address 0x00600018 (0xffff81ee5018): 0x00000000 Write at address 0x00600018 (0xffff81ee5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3fef000. Read at address 0x00600018 (0xffffb3fef018): 0x00000000 Write at address 0x00600018 (0xffffb3fef018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff90b47000. Read at address 0x00600018 (0xffff90b47018): 0x00000000 Write at address 0x00600018 (0xffff90b47018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac939000. Read at address 0x00600018 (0xffffac939018): 0x00000000 Write at address 0x00600018 (0xffffac939018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8082c000. Read at address 0x00600018 (0xffff8082c018): 0x00000000 Write at address 0x00600018 (0xffff8082c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8cd6e000. Read at address 0x00600018 (0xffff8cd6e018): 0x00000000 Write at address 0x00600018 (0xffff8cd6e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffacf1e000. Read at address 0x00600018 (0xffffacf1e018): 0x00000000 Write at address 0x00600018 (0xffffacf1e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 net.ipv6.conf.all.disable_ipv6 = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd696000. Read at address 0x00600018 (0xffffbd696018): 0x00000000 Write at address 0x00600018 (0xffffbd696018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8916f000. Read at address 0x00600018 (0xffff8916f018): 0x00000000 Write at address 0x00600018 (0xffff8916f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbe6a0000. Read at address 0x00600018 (0xffffbe6a0018): 0x00000000 Write at address 0x00600018 (0xffffbe6a0018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbe89a000. Read at address 0x00600018 (0xffffbe89a018): 0x00000000 Write at address 0x00600018 (0xffffbe89a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4e39000. Read at address 0x00600018 (0xffffa4e39018): 0x00000000 Write at address 0x00600018 (0xffffa4e39018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff83c76000. Read at address 0x00600018 (0xffff83c76018): 0x00000000 Write at address 0x00600018 (0xffff83c76018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff7f7c3000. Read at address 0x00600018 (0xffff7f7c3018): 0x00000000 Write at address 0x00600018 (0xffff7f7c3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa57a2000. Read at address 0x00600018 (0xffffa57a2018): 0x00000000 Write at address 0x00600018 (0xffffa57a2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fb1b000. Read at address 0x00600018 (0xffff7fb1b018): 0x00000000 Write at address 0x00600018 (0xffff7fb1b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb3d5f000. Read at address 0x00600018 (0xffffb3d5f018): 0x00000000 Write at address 0x00600018 (0xffffb3d5f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb14ad000. Read at address 0x00600018 (0xffffb14ad018): 0x00000000 Write at address 0x00600018 (0xffffb14ad018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1741000. Read at address 0x00600018 (0xffffb1741018): 0x00000000 Write at address 0x00600018 (0xffffb1741018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi2:dml_code is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b2ce000. Read at address 0x00600018 (0xffff9b2ce018): 0x00000000 Write at address 0x00600018 (0xffff9b2ce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbba84000. Read at address 0x00600018 (0xffffbba84018): 0x00000000 Write at address 0x00600018 (0xffffbba84018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9e82d000. Read at address 0x00600018 (0xffff9e82d018): 0x00000000 Write at address 0x00600018 (0xffff9e82d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d1b5000. Read at address 0x00600018 (0xffff9d1b5018): 0x00000000 Write at address 0x00600018 (0xffff9d1b5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb42b3000. Read at address 0x00600018 (0xffffb42b3018): 0x00000000 Write at address 0x00600018 (0xffffb42b3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8513d000. Read at address 0x00600018 (0xffff8513d018): 0x00000000 Write at address 0x00600018 (0xffff8513d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa51a000. Read at address 0x00600018 (0xffffaa51a018): 0x00000000 Write at address 0x00600018 (0xffffaa51a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9db71000. Read at address 0x00600018 (0xffff9db71018): 0x00000000 Write at address 0x00600018 (0xffff9db71018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd211000. Read at address 0x00600018 (0xffffbd211018): 0x00000000 Write at address 0x00600018 (0xffffbd211018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a7b7000. Read at address 0x00600018 (0xffff9a7b7018): 0x00000000 Write at address 0x00600018 (0xffff9a7b7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2b8e000. Read at address 0x00600018 (0xffffa2b8e018): 0x00000000 Write at address 0x00600018 (0xffffa2b8e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb823c000. Read at address 0x00600018 (0xffffb823c018): 0x00000000 Write at address 0x00600018 (0xffffb823c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff937de000. Read at address 0x00600018 (0xffff937de018): 0x00000000 Write at address 0x00600018 (0xffff937de018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a0eb000. Read at address 0x00600018 (0xffff9a0eb018): 0x00000000 Write at address 0x00600018 (0xffff9a0eb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6b52000. Read at address 0x00600018 (0xffffb6b52018): 0x00000000 Write at address 0x00600018 (0xffffb6b52018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb11f5000. Read at address 0x00600018 (0xffffb11f5018): 0x00000000 Write at address 0x00600018 (0xffffb11f5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff90e2f000. Read at address 0x00600018 (0xffff90e2f018): 0x00000000 Write at address 0x00600018 (0xffff90e2f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffab5b2000. Read at address 0x00600018 (0xffffab5b2018): 0x00000000 Write at address 0x00600018 (0xffffab5b2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8b5c5000. Read at address 0x00600018 (0xffff8b5c5018): 0x00000000 Write at address 0x00600018 (0xffff8b5c5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb7c1000. Read at address 0x00600018 (0xffffbb7c1018): 0x00000000 Write at address 0x00600018 (0xffffbb7c1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3f5d000. Read at address 0x00600018 (0xffffa3f5d018): 0x00000000 Write at address 0x00600018 (0xffffa3f5d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa3987000. Read at address 0x00600018 (0xffffa3987018): 0x00000000 Write at address 0x00600018 (0xffffa3987018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f84a000. Read at address 0x00600018 (0xffff8f84a018): 0x00000000 Write at address 0x00600018 (0xffff8f84a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9fe55000. Read at address 0x00600018 (0xffff9fe55018): 0x00000000 Write at address 0x00600018 (0xffff9fe55018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98778000. Read at address 0x00600018 (0xffff98778018): 0x00000000 Write at address 0x00600018 (0xffff98778018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98a1a000. Read at address 0x00600018 (0xffff98a1a018): 0x00000000 Write at address 0x00600018 (0xffff98a1a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9c1d0000. Read at address 0x00600018 (0xffff9c1d0018): 0x00000000 Write at address 0x00600018 (0xffff9c1d0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb6110000. Read at address 0x00600018 (0xffffb6110018): 0x00000000 Write at address 0x00600018 (0xffffb6110018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5a79000. Read at address 0x00600018 (0xffffa5a79018): 0x00000000 Write at address 0x00600018 (0xffffa5a79018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ad0a000. Read at address 0x00600018 (0xffff8ad0a018): 0x00000000 Write at address 0x00600018 (0xffff8ad0a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3baa000. Read at address 0x00600018 (0xffffb3baa018): 0x00000000 Write at address 0x00600018 (0xffffb3baa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff7f738000. Read at address 0x00600018 (0xffff7f738018): 0x00000000 Write at address 0x00600018 (0xffff7f738018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad6f8000. Read at address 0x00600018 (0xffffad6f8018): 0x00000000 Write at address 0x00600018 (0xffffad6f8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8ef1b000. Read at address 0x00600018 (0xffff8ef1b018): 0x00000000 Write at address 0x00600018 (0xffff8ef1b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaf268000. Read at address 0x00600018 (0xffffaf268018): 0x00000000 Write at address 0x00600018 (0xffffaf268018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab02d000. Read at address 0x00600018 (0xffffab02d018): 0x00000000 Write at address 0x00600018 (0xffffab02d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3afc000. Read at address 0x00600018 (0xffffb3afc018): 0x00000000 Write at address 0x00600018 (0xffffb3afc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6ebb000. Read at address 0x00600018 (0xffffb6ebb018): 0x00000000 Write at address 0x00600018 (0xffffb6ebb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9405f000. Read at address 0x00600018 (0xffff9405f018): 0x00000000 Write at address 0x00600018 (0xffff9405f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94b89000. Read at address 0x00600018 (0xffff94b89018): 0x00000000 Write at address 0x00600018 (0xffff94b89018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff949ac000. Read at address 0x00600018 (0xffff949ac018): 0x00000000 Write at address 0x00600018 (0xffff949ac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba339000. Read at address 0x00600018 (0xffffba339018): 0x00000000 Write at address 0x00600018 (0xffffba339018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd258000. Read at address 0x00600018 (0xffffbd258018): 0x00000000 Write at address 0x00600018 (0xffffbd258018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8c99000. Read at address 0x00600018 (0xffffb8c99018): 0x00000000 Write at address 0x00600018 (0xffffb8c99018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb543a000. Read at address 0x00600018 (0xffffb543a018): 0x00000000 Write at address 0x00600018 (0xffffb543a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8faae000. Read at address 0x00600018 (0xffff8faae018): 0x00000000 Write at address 0x00600018 (0xffff8faae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86b97000. Read at address 0x00600018 (0xffff86b97018): 0x00000000 Write at address 0x00600018 (0xffff86b97018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8667a000. Read at address 0x00600018 (0xffff8667a018): 0x00000000 Write at address 0x00600018 (0xffff8667a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cf06000. Read at address 0x00600018 (0xffff9cf06018): 0x00000000 Write at address 0x00600018 (0xffff9cf06018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9734a000. Read at address 0x00600018 (0xffff9734a018): 0x00000000 Write at address 0x00600018 (0xffff9734a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd947000. Read at address 0x00600018 (0xffffbd947018): 0x00000000 Write at address 0x00600018 (0xffffbd947018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8de43000. Read at address 0x00600018 (0xffff8de43018): 0x00000000 Write at address 0x00600018 (0xffff8de43018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f4df000. Read at address 0x00600018 (0xffff9f4df018): 0x00000000 Write at address 0x00600018 (0xffff9f4df018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffab31a000. Read at address 0x00600018 (0xffffab31a018): 0x00000000 Write at address 0x00600018 (0xffffab31a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff99bef000. Read at address 0x00600018 (0xffff99bef018): 0x00000000 Write at address 0x00600018 (0xffff99bef018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8925d000. Read at address 0x00600018 (0xffff8925d018): 0x00000000 Write at address 0x00600018 (0xffff8925d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e3cd000. Read at address 0x00600018 (0xffff9e3cd018): 0x00000000 Write at address 0x00600018 (0xffff9e3cd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen net.ipv6.conf.all.disable_ipv6 = 0 stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd834000. Read at address 0x00600018 (0xffffbd834018): 0x00000000 Write at address 0x00600018 (0xffffbd834018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff889df000. Read at address 0x00600018 (0xffff889df018): 0x00000000 Write at address 0x00600018 (0xffff889df018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa452d000. Read at address 0x00600018 (0xffffa452d018): 0x00000000 Write at address 0x00600018 (0xffffa452d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaea82000. Read at address 0x00600018 (0xffffaea82018): 0x00000000 Write at address 0x00600018 (0xffffaea82018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6b98000. Read at address 0x00600018 (0xffffa6b98018): 0x00000000 Write at address 0x00600018 (0xffffa6b98018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaffd6000. Read at address 0x00600018 (0xffffaffd6018): 0x00000000 Write at address 0x00600018 (0xffffaffd6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b86d000. Read at address 0x00600018 (0xffff8b86d018): 0x00000000 Write at address 0x00600018 (0xffff8b86d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7b75000. Read at address 0x00600018 (0xffffa7b75018): 0x00000000 Write at address 0x00600018 (0xffffa7b75018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81e46000. Read at address 0x00600018 (0xffff81e46018): 0x00000000 Write at address 0x00600018 (0xffff81e46018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa60d7000. Read at address 0x00600018 (0xffffa60d7018): 0x00000000 Write at address 0x00600018 (0xffffa60d7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff843ce000. Read at address 0x00600018 (0xffff843ce018): 0x00000000 Write at address 0x00600018 (0xffff843ce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb17c5000. Read at address 0x00600018 (0xffffb17c5018): 0x00000000 Write at address 0x00600018 (0xffffb17c5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9f985000. Read at address 0x00600018 (0xffff9f985018): 0x00000000 Write at address 0x00600018 (0xffff9f985018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8bdfd000. Read at address 0x00600018 (0xffff8bdfd018): 0x00000000 Write at address 0x00600018 (0xffff8bdfd018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f8b2000. Read at address 0x00600018 (0xffff9f8b2018): 0x00000000 Write at address 0x00600018 (0xffff9f8b2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff86596000. Read at address 0x00600018 (0xffff86596018): 0x00000000 Write at address 0x00600018 (0xffff86596018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f2ac000. Read at address 0x00600018 (0xffff8f2ac018): 0x00000000 Write at address 0x00600018 (0xffff8f2ac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb6952000. Read at address 0x00600018 (0xffffb6952018): 0x00000000 Write at address 0x00600018 (0xffffb6952018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9372c000. Read at address 0x00600018 (0xffff9372c018): 0x00000000 Write at address 0x00600018 (0xffff9372c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8bccb000. Read at address 0x00600018 (0xffff8bccb018): 0x00000000 Write at address 0x00600018 (0xffff8bccb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff7fe8d000. Read at address 0x00600018 (0xffff7fe8d018): 0x00000000 Write at address 0x00600018 (0xffff7fe8d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf089000. Read at address 0x00600018 (0xffffaf089018): 0x00000000 Write at address 0x00600018 (0xffffaf089018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb833a000. Read at address 0x00600018 (0xffffb833a018): 0x00000000 Write at address 0x00600018 (0xffffb833a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92940000. Read at address 0x00600018 (0xffff92940018): 0x00000000 Write at address 0x00600018 (0xffff92940018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa1f6c000. Read at address 0x00600018 (0xffffa1f6c018): 0x00000000 Write at address 0x00600018 (0xffffa1f6c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbcceb000. Read at address 0x00600018 (0xffffbcceb018): 0x00000000 Write at address 0x00600018 (0xffffbcceb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba7b2000. Read at address 0x00600018 (0xffffba7b2018): 0x00000000 Write at address 0x00600018 (0xffffba7b2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9ffd000. Read at address 0x00600018 (0xffffa9ffd018): 0x00000000 Write at address 0x00600018 (0xffffa9ffd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fef1000. Read at address 0x00600018 (0xffff7fef1018): 0x00000000 Write at address 0x00600018 (0xffff7fef1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90a6b000. Read at address 0x00600018 (0xffff90a6b018): 0x00000000 Write at address 0x00600018 (0xffff90a6b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b329000. Read at address 0x00600018 (0xffff9b329018): 0x00000000 Write at address 0x00600018 (0xffff9b329018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xfffface00000. Read at address 0x00600018 (0xfffface00018): 0x00000000 Write at address 0x00600018 (0xfffface00018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa66e8000. Read at address 0x00600018 (0xffffa66e8018): 0x00000000 Write at address 0x00600018 (0xffffa66e8018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98586000. Read at address 0x00600018 (0xffff98586018): 0x00000000 Write at address 0x00600018 (0xffff98586018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbca8e000. Read at address 0x00600018 (0xffffbca8e018): 0x00000000 Write at address 0x00600018 (0xffffbca8e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa09ad000. Read at address 0x00600018 (0xffffa09ad018): 0x00000000 Write at address 0x00600018 (0xffffa09ad018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff84a5f000. Read at address 0x00600018 (0xffff84a5f018): 0x00000000 Write at address 0x00600018 (0xffff84a5f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbbf8e000. Read at address 0x00600018 (0xffffbbf8e018): 0x00000000 Write at address 0x00600018 (0xffffbbf8e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb8189000. Read at address 0x00600018 (0xffffb8189018): 0x00000000 Write at address 0x00600018 (0xffffb8189018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4870000. Read at address 0x00600018 (0xffffb4870018): 0x00000000 Write at address 0x00600018 (0xffffb4870018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafc35000. Read at address 0x00600018 (0xffffafc35018): 0x00000000 Write at address 0x00600018 (0xffffafc35018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96b7e000. Read at address 0x00600018 (0xffff96b7e018): 0x00000000 Write at address 0x00600018 (0xffff96b7e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5225000. Read at address 0x00600018 (0xffffa5225018): 0x00000000 Write at address 0x00600018 (0xffffa5225018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa37f000. Read at address 0x00600018 (0xffffaa37f018): 0x00000000 Write at address 0x00600018 (0xffffaa37f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8402e000. Read at address 0x00600018 (0xffff8402e018): 0x00000000 Write at address 0x00600018 (0xffff8402e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba0d6000. Read at address 0x00600018 (0xffffba0d6018): 0x00000000 Write at address 0x00600018 (0xffffba0d6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9da42000. Read at address 0x00600018 (0xffff9da42018): 0x00000000 Write at address 0x00600018 (0xffff9da42018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff909b7000. Read at address 0x00600018 (0xffff909b7018): 0x00000000 Write at address 0x00600018 (0xffff909b7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81d89000. Read at address 0x00600018 (0xffff81d89018): 0x00000000 Write at address 0x00600018 (0xffff81d89018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8647c000. Read at address 0x00600018 (0xffff8647c018): 0x00000000 Write at address 0x00600018 (0xffff8647c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb965c000. Read at address 0x00600018 (0xffffb965c018): 0x00000000 Write at address 0x00600018 (0xffffb965c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97f08000. Read at address 0x00600018 (0xffff97f08018): 0x00000000 Write at address 0x00600018 (0xffff97f08018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa73c9000. Read at address 0x00600018 (0xffffa73c9018): 0x00000000 Write at address 0x00600018 (0xffffa73c9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb680b000. Read at address 0x00600018 (0xffffb680b018): 0x00000000 Write at address 0x00600018 (0xffffb680b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaf811000. Read at address 0x00600018 (0xffffaf811018): 0x00000000 Write at address 0x00600018 (0xffffaf811018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b55c000. Read at address 0x00600018 (0xffff9b55c018): 0x00000000 Write at address 0x00600018 (0xffff9b55c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb396000. Read at address 0x00600018 (0xffffbb396018): 0x00000000 Write at address 0x00600018 (0xffffbb396018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffacf7a000. Read at address 0x00600018 (0xffffacf7a018): 0x00000000 Write at address 0x00600018 (0xffffacf7a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbde59000. Read at address 0x00600018 (0xffffbde59018): 0x00000000 Write at address 0x00600018 (0xffffbde59018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f677000. Read at address 0x00600018 (0xffff9f677018): 0x00000000 Write at address 0x00600018 (0xffff9f677018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff96e02000. Read at address 0x00600018 (0xffff96e02018): 0x00000000 Write at address 0x00600018 (0xffff96e02018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fa5a000. Read at address 0x00600018 (0xffff8fa5a018): 0x00000000 Write at address 0x00600018 (0xffff8fa5a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d7b2000. Read at address 0x00600018 (0xffff9d7b2018): 0x00000000 Write at address 0x00600018 (0xffff9d7b2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb776d000. Read at address 0x00600018 (0xffffb776d018): 0x00000000 Write at address 0x00600018 (0xffffb776d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3d1f000. Read at address 0x00600018 (0xffffa3d1f018): 0x00000000 Write at address 0x00600018 (0xffffa3d1f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff80459000. Read at address 0x00600018 (0xffff80459018): 0x00000000 Write at address 0x00600018 (0xffff80459018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8bb07000. Read at address 0x00600018 (0xffff8bb07018): 0x00000000 Write at address 0x00600018 (0xffff8bb07018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8d632000. Read at address 0x00600018 (0xffff8d632018): 0x00000000 Write at address 0x00600018 (0xffff8d632018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbce04000. Read at address 0x00600018 (0xffffbce04018): 0x00000000 Write at address 0x00600018 (0xffffbce04018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff94b6f000. Read at address 0x00600018 (0xffff94b6f018): 0x00000000 Write at address 0x00600018 (0xffff94b6f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbddcd000. Read at address 0x00600018 (0xffffbddcd018): 0x00000000 Write at address 0x00600018 (0xffffbddcd018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae963000. Read at address 0x00600018 (0xffffae963018): 0x00000000 Write at address 0x00600018 (0xffffae963018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1bfd000. Read at address 0x00600018 (0xffffb1bfd018): 0x00000000 Write at address 0x00600018 (0xffffb1bfd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd651000. Read at address 0x00600018 (0xffffbd651018): 0x00000000 Write at address 0x00600018 (0xffffbd651018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9b815000. Read at address 0x00600018 (0xffff9b815018): 0x00000000 Write at address 0x00600018 (0xffff9b815018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 236 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff890f6000. Read at address 0x00600018 (0xffff890f6018): 0x00000000 Write at address 0x00600018 (0xffff890f6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff92e71000. Read at address 0x00600018 (0xffff92e71018): 0x00000000 Write at address 0x00600018 (0xffff92e71018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2a96000. Read at address 0x00600018 (0xffffa2a96018): 0x00000000 Write at address 0x00600018 (0xffffa2a96018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaa817000. Read at address 0x00600018 (0xffffaa817018): 0x00000000 Write at address 0x00600018 (0xffffaa817018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffafb9f000. Read at address 0x00600018 (0xffffafb9f018): 0x00000000 Write at address 0x00600018 (0xffffafb9f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd629000. Read at address 0x00600018 (0xffffbd629018): 0x00000000 Write at address 0x00600018 (0xffffbd629018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb9746000. Read at address 0x00600018 (0xffffb9746018): 0x00000000 Write at address 0x00600018 (0xffffb9746018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc0af000. Read at address 0x00600018 (0xffffbc0af018): 0x00000000 Write at address 0x00600018 (0xffffbc0af018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached ubi0:dml_code is mounted. mtd28 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ad40000. Read at address 0x00600018 (0xffff9ad40018): 0x00000000 Write at address 0x00600018 (0xffff9ad40018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7819000. Read at address 0x00600018 (0xffffa7819018): 0x00000000 Write at address 0x00600018 (0xffffa7819018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8adbc000. Read at address 0x00600018 (0xffff8adbc018): 0x00000000 Write at address 0x00600018 (0xffff8adbc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff822c3000. Read at address 0x00600018 (0xffff822c3018): 0x00000000 Write at address 0x00600018 (0xffff822c3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d743000. Read at address 0x00600018 (0xffff9d743018): 0x00000000 Write at address 0x00600018 (0xffff9d743018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbdcc1000. Read at address 0x00600018 (0xffffbdcc1018): 0x00000000 Write at address 0x00600018 (0xffffbdcc1018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83bed000. Read at address 0x00600018 (0xffff83bed018): 0x00000000 Write at address 0x00600018 (0xffff83bed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7321000. Read at address 0x00600018 (0xffffb7321018): 0x00000000 Write at address 0x00600018 (0xffffb7321018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff96e34000. Read at address 0x00600018 (0xffff96e34018): 0x00000000 Write at address 0x00600018 (0xffff96e34018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff98b35000. Read at address 0x00600018 (0xffff98b35018): 0x00000000 Write at address 0x00600018 (0xffff98b35018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff80b57000. Read at address 0x00600018 (0xffff80b57018): 0x00000000 Write at address 0x00600018 (0xffff80b57018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffae64d000. Read at address 0x00600018 (0xffffae64d018): 0x00000000 Write at address 0x00600018 (0xffffae64d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa7f31000. Read at address 0x00600018 (0xffffa7f31018): 0x00000000 Write at address 0x00600018 (0xffffa7f31018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7601000. Read at address 0x00600018 (0xffffa7601018): 0x00000000 Write at address 0x00600018 (0xffffa7601018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb6a3000. Read at address 0x00600018 (0xffffbb6a3018): 0x00000000 Write at address 0x00600018 (0xffffbb6a3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a513000. Read at address 0x00600018 (0xffff8a513018): 0x00000000 Write at address 0x00600018 (0xffff8a513018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff850da000. Read at address 0x00600018 (0xffff850da018): 0x00000000 Write at address 0x00600018 (0xffff850da018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa898f000. Read at address 0x00600018 (0xffffa898f018): 0x00000000 Write at address 0x00600018 (0xffffa898f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbae16000. Read at address 0x00600018 (0xffffbae16018): 0x00000000 Write at address 0x00600018 (0xffffbae16018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6f3c000. Read at address 0x00600018 (0xffffa6f3c018): 0x00000000 Write at address 0x00600018 (0xffffa6f3c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d60e000. Read at address 0x00600018 (0xffff8d60e018): 0x00000000 Write at address 0x00600018 (0xffff8d60e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb96ce000. Read at address 0x00600018 (0xffffb96ce018): 0x00000000 Write at address 0x00600018 (0xffffb96ce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa57b6000. Read at address 0x00600018 (0xffffa57b6018): 0x00000000 Write at address 0x00600018 (0xffffa57b6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaee26000. Read at address 0x00600018 (0xffffaee26018): 0x00000000 Write at address 0x00600018 (0xffffaee26018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa04b3000. Read at address 0x00600018 (0xffffa04b3018): 0x00000000 Write at address 0x00600018 (0xffffa04b3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8fea4000. Read at address 0x00600018 (0xffff8fea4018): 0x00000000 Write at address 0x00600018 (0xffff8fea4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd1ca000. Read at address 0x00600018 (0xffffbd1ca018): 0x00000000 Write at address 0x00600018 (0xffffbd1ca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb4079000. Read at address 0x00600018 (0xffffb4079018): 0x00000000 Write at address 0x00600018 (0xffffb4079018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8104f000. Read at address 0x00600018 (0xffff8104f018): 0x00000000 Write at address 0x00600018 (0xffff8104f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb724d000. Read at address 0x00600018 (0xffffb724d018): 0x00000000 Write at address 0x00600018 (0xffffb724d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa038a000. Read at address 0x00600018 (0xffffa038a018): 0x00000000 Write at address 0x00600018 (0xffffa038a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85637000. Read at address 0x00600018 (0xffff85637018): 0x00000000 Write at address 0x00600018 (0xffff85637018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff81ab3000. Read at address 0x00600018 (0xffff81ab3018): 0x00000000 Write at address 0x00600018 (0xffff81ab3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7680000. Read at address 0x00600018 (0xffffb7680018): 0x00000000 Write at address 0x00600018 (0xffffb7680018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff905c3000. Read at address 0x00600018 (0xffff905c3018): 0x00000000 Write at address 0x00600018 (0xffff905c3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaf250000. Read at address 0x00600018 (0xffffaf250018): 0x00000000 Write at address 0x00600018 (0xffffaf250018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb7b85000. Read at address 0x00600018 (0xffffb7b85018): 0x00000000 Write at address 0x00600018 (0xffffb7b85018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9b38d000. Read at address 0x00600018 (0xffff9b38d018): 0x00000000 Write at address 0x00600018 (0xffff9b38d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8dab0000. Read at address 0x00600018 (0xffff8dab0018): 0x00000000 Write at address 0x00600018 (0xffff8dab0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ab00000. Read at address 0x00600018 (0xffff8ab00018): 0x00000000 Write at address 0x00600018 (0xffff8ab00018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8cacb000. Read at address 0x00600018 (0xffff8cacb018): 0x00000000 Write at address 0x00600018 (0xffff8cacb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a225000. Read at address 0x00600018 (0xffff8a225018): 0x00000000 Write at address 0x00600018 (0xffff8a225018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3a67000. Read at address 0x00600018 (0xffffa3a67018): 0x00000000 Write at address 0x00600018 (0xffffa3a67018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb0a35000. Read at address 0x00600018 (0xffffb0a35018): 0x00000000 Write at address 0x00600018 (0xffffb0a35018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb5dc2000. Read at address 0x00600018 (0xffffb5dc2018): 0x00000000 Write at address 0x00600018 (0xffffb5dc2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b711000. Read at address 0x00600018 (0xffff9b711018): 0x00000000 Write at address 0x00600018 (0xffff9b711018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff97722000. Read at address 0x00600018 (0xffff97722018): 0x00000000 Write at address 0x00600018 (0xffff97722018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba25a000. Read at address 0x00600018 (0xffffba25a018): 0x00000000 Write at address 0x00600018 (0xffffba25a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabc77000. Read at address 0x00600018 (0xffffabc77018): 0x00000000 Write at address 0x00600018 (0xffffabc77018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa094e000. Read at address 0x00600018 (0xffffa094e018): 0x00000000 Write at address 0x00600018 (0xffffa094e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92fe1000. Read at address 0x00600018 (0xffff92fe1018): 0x00000000 Write at address 0x00600018 (0xffff92fe1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8c58e000. Read at address 0x00600018 (0xffff8c58e018): 0x00000000 Write at address 0x00600018 (0xffff8c58e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaff8d000. Read at address 0x00600018 (0xffffaff8d018): 0x00000000 Write at address 0x00600018 (0xffffaff8d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d3f3000. Read at address 0x00600018 (0xffff8d3f3018): 0x00000000 Write at address 0x00600018 (0xffff8d3f3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabd2c000. Read at address 0x00600018 (0xffffabd2c018): 0x00000000 Write at address 0x00600018 (0xffffabd2c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4a5c000. Read at address 0x00600018 (0xffffb4a5c018): 0x00000000 Write at address 0x00600018 (0xffffb4a5c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa73b6000. Read at address 0x00600018 (0xffffa73b6018): 0x00000000 Write at address 0x00600018 (0xffffa73b6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff81796000. Read at address 0x00600018 (0xffff81796018): 0x00000000 Write at address 0x00600018 (0xffff81796018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e727000. Read at address 0x00600018 (0xffff8e727018): 0x00000000 Write at address 0x00600018 (0xffff8e727018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa7f6f000. Read at address 0x00600018 (0xffffa7f6f018): 0x00000000 Write at address 0x00600018 (0xffffa7f6f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffabb4f000. Read at address 0x00600018 (0xffffabb4f018): 0x00000000 Write at address 0x00600018 (0xffffabb4f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb96df000. Read at address 0x00600018 (0xffffb96df018): 0x00000000 Write at address 0x00600018 (0xffffb96df018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb193c000. Read at address 0x00600018 (0xffffb193c018): 0x00000000 Write at address 0x00600018 (0xffffb193c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb754000. Read at address 0x00600018 (0xffffbb754018): 0x00000000 Write at address 0x00600018 (0xffffbb754018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa61ec000. Read at address 0x00600018 (0xffffa61ec018): 0x00000000 Write at address 0x00600018 (0xffffa61ec018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbdbc000. Read at address 0x00600018 (0xffffbbdbc018): 0x00000000 Write at address 0x00600018 (0xffffbbdbc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab1b6000. Read at address 0x00600018 (0xffffab1b6018): 0x00000000 Write at address 0x00600018 (0xffffab1b6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa720f000. Read at address 0x00600018 (0xffffa720f018): 0x00000000 Write at address 0x00600018 (0xffffa720f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83370000. Read at address 0x00600018 (0xffff83370018): 0x00000000 Write at address 0x00600018 (0xffff83370018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa0e82000. Read at address 0x00600018 (0xffffa0e82018): 0x00000000 Write at address 0x00600018 (0xffffa0e82018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa6e0e000. Read at address 0x00600018 (0xffffa6e0e018): 0x00000000 Write at address 0x00600018 (0xffffa6e0e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97c27000. Read at address 0x00600018 (0xffff97c27018): 0x00000000 Write at address 0x00600018 (0xffff97c27018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b693000. Read at address 0x00600018 (0xffff8b693018): 0x00000000 Write at address 0x00600018 (0xffff8b693018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff807e9000. Read at address 0x00600018 (0xffff807e9018): 0x00000000 Write at address 0x00600018 (0xffff807e9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffada78000. Read at address 0x00600018 (0xffffada78018): 0x00000000 Write at address 0x00600018 (0xffffada78018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbb47e000. Read at address 0x00600018 (0xffffbb47e018): 0x00000000 Write at address 0x00600018 (0xffffbb47e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9750a000. Read at address 0x00600018 (0xffff9750a018): 0x00000000 Write at address 0x00600018 (0xffff9750a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb849a000. Read at address 0x00600018 (0xffffb849a018): 0x00000000 Write at address 0x00600018 (0xffffb849a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9a038000. Read at address 0x00600018 (0xffff9a038018): 0x00000000 Write at address 0x00600018 (0xffff9a038018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6a39000. Read at address 0x00600018 (0xffffa6a39018): 0x00000000 Write at address 0x00600018 (0xffffa6a39018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80ea4000. Read at address 0x00600018 (0xffff80ea4018): 0x00000000 Write at address 0x00600018 (0xffff80ea4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff975fc000. Read at address 0x00600018 (0xffff975fc018): 0x00000000 Write at address 0x00600018 (0xffff975fc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff925d0000. Read at address 0x00600018 (0xffff925d0018): 0x00000000 Write at address 0x00600018 (0xffff925d0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff885dd000. Read at address 0x00600018 (0xffff885dd018): 0x00000000 Write at address 0x00600018 (0xffff885dd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb6fc0000. Read at address 0x00600018 (0xffffb6fc0018): 0x00000000 Write at address 0x00600018 (0xffffb6fc0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb6460000. Read at address 0x00600018 (0xffffb6460018): 0x00000000 Write at address 0x00600018 (0xffffb6460018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8ad76000. Read at address 0x00600018 (0xffff8ad76018): 0x00000000 Write at address 0x00600018 (0xffff8ad76018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8e43c000. Read at address 0x00600018 (0xffff8e43c018): 0x00000000 Write at address 0x00600018 (0xffff8e43c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8491f000. Read at address 0x00600018 (0xffff8491f018): 0x00000000 Write at address 0x00600018 (0xffff8491f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb2ba4000. Read at address 0x00600018 (0xffffb2ba4018): 0x00000000 Write at address 0x00600018 (0xffffb2ba4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff880d2000. Read at address 0x00600018 (0xffff880d2018): 0x00000000 Write at address 0x00600018 (0xffff880d2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d2c3000. Read at address 0x00600018 (0xffff8d2c3018): 0x00000000 Write at address 0x00600018 (0xffff8d2c3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbaa27000. Read at address 0x00600018 (0xffffbaa27018): 0x00000000 Write at address 0x00600018 (0xffffbaa27018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96756000. Read at address 0x00600018 (0xffff96756018): 0x00000000 Write at address 0x00600018 (0xffff96756018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa8b34000. Read at address 0x00600018 (0xffffa8b34018): 0x00000000 Write at address 0x00600018 (0xffffa8b34018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. net.ipv6.conf.all.addr_gen_mode = 0 Memory mapped at address 0xffffa7303000. Read at address 0x00600018 (0xffffa7303018): 0x00000000 Write at address 0x00600018 (0xffffa7303018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb3585000. Read at address 0x00600018 (0xffffb3585018): 0x00000000 Write at address 0x00600018 (0xffffb3585018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa70e4000. Read at address 0x00600018 (0xffffa70e4018): 0x00000000 Write at address 0x00600018 (0xffffa70e4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d893000. Read at address 0x00600018 (0xffff8d893018): 0x00000000 Write at address 0x00600018 (0xffff8d893018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fda4000. Read at address 0x00600018 (0xffff7fda4018): 0x00000000 Write at address 0x00600018 (0xffff7fda4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa11be000. Read at address 0x00600018 (0xffffa11be018): 0x00000000 Write at address 0x00600018 (0xffffa11be018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c6e6000. Read at address 0x00600018 (0xffff9c6e6018): 0x00000000 Write at address 0x00600018 (0xffff9c6e6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9adfc000. Read at address 0x00600018 (0xffff9adfc018): 0x00000000 Write at address 0x00600018 (0xffff9adfc018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91645000. Read at address 0x00600018 (0xffff91645018): 0x00000000 Write at address 0x00600018 (0xffff91645018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb63c0000. Read at address 0x00600018 (0xffffb63c0018): 0x00000000 Write at address 0x00600018 (0xffffb63c0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi0:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb7b16000. Read at address 0x00600018 (0xffffb7b16018): 0x00000000 Write at address 0x00600018 (0xffffb7b16018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbcade000. Read at address 0x00600018 (0xffffbcade018): 0x00000000 Write at address 0x00600018 (0xffffbcade018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa294f000. Read at address 0x00600018 (0xffffa294f018): 0x00000000 Write at address 0x00600018 (0xffffa294f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3460000. Read at address 0x00600018 (0xffffa3460018): 0x00000000 Write at address 0x00600018 (0xffffa3460018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb7d7c000. Read at address 0x00600018 (0xffffb7d7c018): 0x00000000 Write at address 0x00600018 (0xffffb7d7c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb7e03000. Read at address 0x00600018 (0xffffb7e03018): 0x00000000 Write at address 0x00600018 (0xffffb7e03018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb1407000. Read at address 0x00600018 (0xffffb1407018): 0x00000000 Write at address 0x00600018 (0xffffb1407018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff942e1000. Read at address 0x00600018 (0xffff942e1018): 0x00000000 Write at address 0x00600018 (0xffff942e1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbeb3a000. Read at address 0x00600018 (0xffffbeb3a018): 0x00000000 Write at address 0x00600018 (0xffffbeb3a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85127000. Read at address 0x00600018 (0xffff85127018): 0x00000000 Write at address 0x00600018 (0xffff85127018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8d2d9000. Read at address 0x00600018 (0xffff8d2d9018): 0x00000000 Write at address 0x00600018 (0xffff8d2d9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffba1a2000. Read at address 0x00600018 (0xffffba1a2018): 0x00000000 Write at address 0x00600018 (0xffffba1a2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba842000. Read at address 0x00600018 (0xffffba842018): 0x00000000 Write at address 0x00600018 (0xffffba842018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8d8c6000. Read at address 0x00600018 (0xffff8d8c6018): 0x00000000 Write at address 0x00600018 (0xffff8d8c6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8553c000. Read at address 0x00600018 (0xffff8553c018): 0x00000000 Write at address 0x00600018 (0xffff8553c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb532a000. Read at address 0x00600018 (0xffffb532a018): 0x00000000 Write at address 0x00600018 (0xffffb532a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d71a000. Read at address 0x00600018 (0xffff9d71a018): 0x00000000 Write at address 0x00600018 (0xffff9d71a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1f60000. Read at address 0x00600018 (0xffffb1f60018): 0x00000000 Write at address 0x00600018 (0xffffb1f60018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa3712000. Read at address 0x00600018 (0xffffa3712018): 0x00000000 Write at address 0x00600018 (0xffffa3712018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4048000. Read at address 0x00600018 (0xffffb4048018): 0x00000000 Write at address 0x00600018 (0xffffb4048018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff82c48000. Read at address 0x00600018 (0xffff82c48018): 0x00000000 Write at address 0x00600018 (0xffff82c48018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8222e000. Read at address 0x00600018 (0xffff8222e018): 0x00000000 Write at address 0x00600018 (0xffff8222e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff845a2000. Read at address 0x00600018 (0xffff845a2018): 0x00000000 Write at address 0x00600018 (0xffff845a2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8aae7000. Read at address 0x00600018 (0xffff8aae7018): 0x00000000 Write at address 0x00600018 (0xffff8aae7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7bdc000. Read at address 0x00600018 (0xffffb7bdc018): 0x00000000 Write at address 0x00600018 (0xffffb7bdc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb55c5000. Read at address 0x00600018 (0xffffb55c5018): 0x00000000 Write at address 0x00600018 (0xffffb55c5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ce79000. Read at address 0x00600018 (0xffff8ce79018): 0x00000000 Write at address 0x00600018 (0xffff8ce79018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff99155000. Read at address 0x00600018 (0xffff99155018): 0x00000000 Write at address 0x00600018 (0xffff99155018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa1c0f000. Read at address 0x00600018 (0xffffa1c0f018): 0x00000000 Write at address 0x00600018 (0xffffa1c0f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff87513000. Read at address 0x00600018 (0xffff87513018): 0x00000000 Write at address 0x00600018 (0xffff87513018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff96550000. Read at address 0x00600018 (0xffff96550018): 0x00000000 Write at address 0x00600018 (0xffff96550018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0fc9000. Read at address 0x00600018 (0xffffa0fc9018): 0x00000000 Write at address 0x00600018 (0xffffa0fc9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff967a9000. Read at address 0x00600018 (0xffff967a9018): 0x00000000 Write at address 0x00600018 (0xffff967a9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94046000. Read at address 0x00600018 (0xffff94046018): 0x00000000 Write at address 0x00600018 (0xffff94046018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff84db8000. Read at address 0x00600018 (0xffff84db8018): 0x00000000 Write at address 0x00600018 (0xffff84db8018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8a784000. Read at address 0x00600018 (0xffff8a784018): 0x00000000 Write at address 0x00600018 (0xffff8a784018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa0ca4000. Read at address 0x00600018 (0xffffa0ca4018): 0x00000000 Write at address 0x00600018 (0xffffa0ca4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffab9d1000. Read at address 0x00600018 (0xffffab9d1018): 0x00000000 Write at address 0x00600018 (0xffffab9d1018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa6588000. Read at address 0x00600018 (0xffffa6588018): 0x00000000 Write at address 0x00600018 (0xffffa6588018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb88c6000. Read at address 0x00600018 (0xffffb88c6018): 0x00000000 Write at address 0x00600018 (0xffffb88c6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa5fcb000. Read at address 0x00600018 (0xffffa5fcb018): 0x00000000 Write at address 0x00600018 (0xffffa5fcb018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83993000. Read at address 0x00600018 (0xffff83993018): 0x00000000 Write at address 0x00600018 (0xffff83993018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d827000. Read at address 0x00600018 (0xffff9d827018): 0x00000000 Write at address 0x00600018 (0xffff9d827018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7ab1000. Read at address 0x00600018 (0xffffb7ab1018): 0x00000000 Write at address 0x00600018 (0xffffb7ab1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffba06e000. Read at address 0x00600018 (0xffffba06e018): 0x00000000 Write at address 0x00600018 (0xffffba06e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fba4000. Read at address 0x00600018 (0xffff7fba4018): 0x00000000 Write at address 0x00600018 (0xffff7fba4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff84519000. Read at address 0x00600018 (0xffff84519018): 0x00000000 Write at address 0x00600018 (0xffff84519018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8788f000. Read at address 0x00600018 (0xffff8788f018): 0x00000000 Write at address 0x00600018 (0xffff8788f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff904b8000. Read at address 0x00600018 (0xffff904b8018): 0x00000000 Write at address 0x00600018 (0xffff904b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb3f42000. Read at address 0x00600018 (0xffffb3f42018): 0x00000000 Write at address 0x00600018 (0xffffb3f42018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9fd0d000. Read at address 0x00600018 (0xffff9fd0d018): 0x00000000 Write at address 0x00600018 (0xffff9fd0d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff991a6000. Read at address 0x00600018 (0xffff991a6018): 0x00000000 Write at address 0x00600018 (0xffff991a6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff913f1000. Read at address 0x00600018 (0xffff913f1018): 0x00000000 Write at address 0x00600018 (0xffff913f1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff98a20000. Read at address 0x00600018 (0xffff98a20018): 0x00000000 Write at address 0x00600018 (0xffff98a20018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8d18e000. Read at address 0x00600018 (0xffff8d18e018): 0x00000000 Write at address 0x00600018 (0xffff8d18e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8ae8e000. Read at address 0x00600018 (0xffff8ae8e018): 0x00000000 Write at address 0x00600018 (0xffff8ae8e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff91668000. Read at address 0x00600018 (0xffff91668018): 0x00000000 Write at address 0x00600018 (0xffff91668018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb3fa2000. Read at address 0x00600018 (0xffffb3fa2018): 0x00000000 Write at address 0x00600018 (0xffffb3fa2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d890000. Read at address 0x00600018 (0xffff9d890018): 0x00000000 Write at address 0x00600018 (0xffff9d890018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8546000. Read at address 0x00600018 (0xffffb8546018): 0x00000000 Write at address 0x00600018 (0xffffb8546018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb6c7d000. Read at address 0x00600018 (0xffffb6c7d018): 0x00000000 Write at address 0x00600018 (0xffffb6c7d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb5e0000. Read at address 0x00600018 (0xffffbb5e0018): 0x00000000 Write at address 0x00600018 (0xffffbb5e0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d042000. Read at address 0x00600018 (0xffff8d042018): 0x00000000 Write at address 0x00600018 (0xffff8d042018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb59a7000. Read at address 0x00600018 (0xffffb59a7018): 0x00000000 Write at address 0x00600018 (0xffffb59a7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8bc43000. Read at address 0x00600018 (0xffff8bc43018): 0x00000000 Write at address 0x00600018 (0xffff8bc43018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff97249000. Read at address 0x00600018 (0xffff97249018): 0x00000000 Write at address 0x00600018 (0xffff97249018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8787b000. Read at address 0x00600018 (0xffff8787b018): 0x00000000 Write at address 0x00600018 (0xffff8787b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbdf6b000. Read at address 0x00600018 (0xffffbdf6b018): 0x00000000 Write at address 0x00600018 (0xffffbdf6b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa95fe000. Read at address 0x00600018 (0xffffa95fe018): 0x00000000 Write at address 0x00600018 (0xffffa95fe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 net.ipv6.conf.all.disable_ipv6 = 0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89e75000. Read at address 0x00600018 (0xffff89e75018): 0x00000000 Write at address 0x00600018 (0xffff89e75018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9733000. Read at address 0x00600018 (0xffffa9733018): 0x00000000 Write at address 0x00600018 (0xffffa9733018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa831b000. Read at address 0x00600018 (0xffffa831b018): 0x00000000 Write at address 0x00600018 (0xffffa831b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabe39000. Read at address 0x00600018 (0xffffabe39018): 0x00000000 Write at address 0x00600018 (0xffffabe39018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadf19000. Read at address 0x00600018 (0xffffadf19018): 0x00000000 Write at address 0x00600018 (0xffffadf19018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbad55000. Read at address 0x00600018 (0xffffbad55018): 0x00000000 Write at address 0x00600018 (0xffffbad55018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff98184000. Read at address 0x00600018 (0xffff98184018): 0x00000000 Write at address 0x00600018 (0xffff98184018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d05c000. Read at address 0x00600018 (0xffff8d05c018): 0x00000000 Write at address 0x00600018 (0xffff8d05c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa764f000. Read at address 0x00600018 (0xffffa764f018): 0x00000000 Write at address 0x00600018 (0xffffa764f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8301e000. Read at address 0x00600018 (0xffff8301e018): 0x00000000 Write at address 0x00600018 (0xffff8301e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87485000. Read at address 0x00600018 (0xffff87485018): 0x00000000 Write at address 0x00600018 (0xffff87485018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e2ae000. Read at address 0x00600018 (0xffff8e2ae018): 0x00000000 Write at address 0x00600018 (0xffff8e2ae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff857a8000. Read at address 0x00600018 (0xffff857a8018): 0x00000000 Write at address 0x00600018 (0xffff857a8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff929d2000. Read at address 0x00600018 (0xffff929d2018): 0x00000000 Write at address 0x00600018 (0xffff929d2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out _rpmsg_char_find_rproc: 78000000.r5f device is mostly yet to be created! rpmsg_char_open: _rpmsg_char_find_rproc failed Ipc_InitDriver: rpmsg_char_open failed, retrying... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa0893000. Read at address 0x00600018 (0xffffa0893018): 0x00000000 Write at address 0x00600018 (0xffffa0893018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0b69000. Read at address 0x00600018 (0xffffa0b69018): 0x00000000 Write at address 0x00600018 (0xffffa0b69018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3e2b000. Read at address 0x00600018 (0xffffa3e2b018): 0x00000000 Write at address 0x00600018 (0xffffa3e2b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa032e000. Read at address 0x00600018 (0xffffa032e018): 0x00000000 Write at address 0x00600018 (0xffffa032e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b27e000. Read at address 0x00600018 (0xffff9b27e018): 0x00000000 Write at address 0x00600018 (0xffff9b27e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb6227000. Read at address 0x00600018 (0xffffb6227018): 0x00000000 Write at address 0x00600018 (0xffffb6227018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86256000. Read at address 0x00600018 (0xffff86256018): 0x00000000 Write at address 0x00600018 (0xffff86256018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd295000. Read at address 0x00600018 (0xffffbd295018): 0x00000000 Write at address 0x00600018 (0xffffbd295018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbbe8a000. Read at address 0x00600018 (0xffffbbe8a018): 0x00000000 Write at address 0x00600018 (0xffffbbe8a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb6785000. Read at address 0x00600018 (0xffffb6785018): 0x00000000 Write at address 0x00600018 (0xffffb6785018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc7a7000. Read at address 0x00600018 (0xffffbc7a7018): 0x00000000 Write at address 0x00600018 (0xffffbc7a7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8daa6000. Read at address 0x00600018 (0xffff8daa6018): 0x00000000 Write at address 0x00600018 (0xffff8daa6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad56e000. Read at address 0x00600018 (0xffffad56e018): 0x00000000 Write at address 0x00600018 (0xffffad56e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbb36000. Read at address 0x00600018 (0xffffbbb36018): 0x00000000 Write at address 0x00600018 (0xffffbbb36018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9bd3f000. Read at address 0x00600018 (0xffff9bd3f018): 0x00000000 Write at address 0x00600018 (0xffff9bd3f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81941000. Read at address 0x00600018 (0xffff81941018): 0x00000000 Write at address 0x00600018 (0xffff81941018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb8228000. Read at address 0x00600018 (0xffffb8228018): 0x00000000 Write at address 0x00600018 (0xffffb8228018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffba34b000. Read at address 0x00600018 (0xffffba34b018): 0x00000000 Write at address 0x00600018 (0xffffba34b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88d6c000. Read at address 0x00600018 (0xffff88d6c018): 0x00000000 Write at address 0x00600018 (0xffff88d6c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffafba8000. Read at address 0x00600018 (0xffffafba8018): 0x00000000 Write at address 0x00600018 (0xffffafba8018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbdd91000. Read at address 0x00600018 (0xffffbdd91018): 0x00000000 Write at address 0x00600018 (0xffffbdd91018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac82f000. Read at address 0x00600018 (0xffffac82f018): 0x00000000 Write at address 0x00600018 (0xffffac82f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad2ed000. Read at address 0x00600018 (0xffffad2ed018): 0x00000000 Write at address 0x00600018 (0xffffad2ed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff88879000. Read at address 0x00600018 (0xffff88879018): 0x00000000 Write at address 0x00600018 (0xffff88879018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8e03b000. Read at address 0x00600018 (0xffff8e03b018): 0x00000000 Write at address 0x00600018 (0xffff8e03b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9d64d000. Read at address 0x00600018 (0xffff9d64d018): 0x00000000 Write at address 0x00600018 (0xffff9d64d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff7ff66000. Read at address 0x00600018 (0xffff7ff66018): 0x00000000 Write at address 0x00600018 (0xffff7ff66018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9bf3d000. Read at address 0x00600018 (0xffff9bf3d018): 0x00000000 Write at address 0x00600018 (0xffff9bf3d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb15aa000. Read at address 0x00600018 (0xffffb15aa018): 0x00000000 Write at address 0x00600018 (0xffffb15aa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa135000. Read at address 0x00600018 (0xffffaa135018): 0x00000000 Write at address 0x00600018 (0xffffaa135018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89b42000. Read at address 0x00600018 (0xffff89b42018): 0x00000000 Write at address 0x00600018 (0xffff89b42018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8212000. Read at address 0x00600018 (0xffffb8212018): 0x00000000 Write at address 0x00600018 (0xffffb8212018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8ca8000. Read at address 0x00600018 (0xffffb8ca8018): 0x00000000 Write at address 0x00600018 (0xffffb8ca8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb356e000. Read at address 0x00600018 (0xffffb356e018): 0x00000000 Write at address 0x00600018 (0xffffb356e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5dfb000. Read at address 0x00600018 (0xffffa5dfb018): 0x00000000 Write at address 0x00600018 (0xffffa5dfb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99f25000. Read at address 0x00600018 (0xffff99f25018): 0x00000000 Write at address 0x00600018 (0xffff99f25018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7415000. Read at address 0x00600018 (0xffffa7415018): 0x00000000 Write at address 0x00600018 (0xffffa7415018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b9a0000. Read at address 0x00600018 (0xffff9b9a0018): 0x00000000 Write at address 0x00600018 (0xffff9b9a0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffae22a000. Read at address 0x00600018 (0xffffae22a018): 0x00000000 Write at address 0x00600018 (0xffffae22a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8fd9c000. Read at address 0x00600018 (0xffff8fd9c018): 0x00000000 Write at address 0x00600018 (0xffff8fd9c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff896f1000. Read at address 0x00600018 (0xffff896f1018): 0x00000000 Write at address 0x00600018 (0xffff896f1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff95a89000. Read at address 0x00600018 (0xffff95a89018): 0x00000000 Write at address 0x00600018 (0xffff95a89018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5711000. Read at address 0x00600018 (0xffffb5711018): 0x00000000 Write at address 0x00600018 (0xffffb5711018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9334d000. Read at address 0x00600018 (0xffff9334d018): 0x00000000 Write at address 0x00600018 (0xffff9334d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0502000. Read at address 0x00600018 (0xffffb0502018): 0x00000000 Write at address 0x00600018 (0xffffb0502018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8babf000. Read at address 0x00600018 (0xffff8babf018): 0x00000000 Write at address 0x00600018 (0xffff8babf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e08e000. Read at address 0x00600018 (0xffff9e08e018): 0x00000000 Write at address 0x00600018 (0xffff9e08e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ae3f000. Read at address 0x00600018 (0xffff9ae3f018): 0x00000000 Write at address 0x00600018 (0xffff9ae3f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff95806000. Read at address 0x00600018 (0xffff95806018): 0x00000000 Write at address 0x00600018 (0xffff95806018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffacaef000. Read at address 0x00600018 (0xffffacaef018): 0x00000000 Write at address 0x00600018 (0xffffacaef018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa354b000. Read at address 0x00600018 (0xffffa354b018): 0x00000000 Write at address 0x00600018 (0xffffa354b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff86313000. Read at address 0x00600018 (0xffff86313018): 0x00000000 Write at address 0x00600018 (0xffff86313018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa240b000. Read at address 0x00600018 (0xffffa240b018): 0x00000000 Write at address 0x00600018 (0xffffa240b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0c00000. Read at address 0x00600018 (0xffffa0c00018): 0x00000000 Write at address 0x00600018 (0xffffa0c00018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4f21000. Read at address 0x00600018 (0xffffa4f21018): 0x00000000 Write at address 0x00600018 (0xffffa4f21018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7db0000. Read at address 0x00600018 (0xffffb7db0018): 0x00000000 Write at address 0x00600018 (0xffffb7db0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb55a4000. Read at address 0x00600018 (0xffffb55a4018): 0x00000000 Write at address 0x00600018 (0xffffb55a4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa25e8000. Read at address 0x00600018 (0xffffa25e8018): 0x00000000 Write at address 0x00600018 (0xffffa25e8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1e26000. Read at address 0x00600018 (0xffffa1e26018): 0x00000000 Write at address 0x00600018 (0xffffa1e26018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88703000. Read at address 0x00600018 (0xffff88703018): 0x00000000 Write at address 0x00600018 (0xffff88703018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0e08000. Read at address 0x00600018 (0xffffa0e08018): 0x00000000 Write at address 0x00600018 (0xffffa0e08018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbdf35000. Read at address 0x00600018 (0xffffbdf35018): 0x00000000 Write at address 0x00600018 (0xffffbdf35018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8582d000. Read at address 0x00600018 (0xffff8582d018): 0x00000000 Write at address 0x00600018 (0xffff8582d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd66e000. Read at address 0x00600018 (0xffffbd66e018): 0x00000000 Write at address 0x00600018 (0xffffbd66e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffab375000. Read at address 0x00600018 (0xffffab375018): 0x00000000 Write at address 0x00600018 (0xffffab375018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 236 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85431000. Read at address 0x00600018 (0xffff85431018): 0x00000000 Write at address 0x00600018 (0xffff85431018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c8f2000. Read at address 0x00600018 (0xffff9c8f2018): 0x00000000 Write at address 0x00600018 (0xffff9c8f2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8287e000. Read at address 0x00600018 (0xffff8287e018): 0x00000000 Write at address 0x00600018 (0xffff8287e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa16f2000. Read at address 0x00600018 (0xffffa16f2018): 0x00000000 Write at address 0x00600018 (0xffffa16f2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0d8a000. Read at address 0x00600018 (0xffffa0d8a018): 0x00000000 Write at address 0x00600018 (0xffffa0d8a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbf049000. Read at address 0x00600018 (0xffffbf049018): 0x00000000 Write at address 0x00600018 (0xffffbf049018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6b6b000. Read at address 0x00600018 (0xffffa6b6b018): 0x00000000 Write at address 0x00600018 (0xffffa6b6b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa45aa000. Read at address 0x00600018 (0xffffa45aa018): 0x00000000 Write at address 0x00600018 (0xffffa45aa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e3d3000. Read at address 0x00600018 (0xffff8e3d3018): 0x00000000 Write at address 0x00600018 (0xffff8e3d3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9dc50000. Read at address 0x00600018 (0xffff9dc50018): 0x00000000 Write at address 0x00600018 (0xffff9dc50018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff93be8000. Read at address 0x00600018 (0xffff93be8018): 0x00000000 Write at address 0x00600018 (0xffff93be8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96081000. Read at address 0x00600018 (0xffff96081018): 0x00000000 Write at address 0x00600018 (0xffff96081018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96b30000. Read at address 0x00600018 (0xffff96b30018): 0x00000000 Write at address 0x00600018 (0xffff96b30018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffac2e9000. Read at address 0x00600018 (0xffffac2e9018): 0x00000000 Write at address 0x00600018 (0xffffac2e9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa412b000. Read at address 0x00600018 (0xffffa412b018): 0x00000000 Write at address 0x00600018 (0xffffa412b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa41f8000. Read at address 0x00600018 (0xffffa41f8018): 0x00000000 Write at address 0x00600018 (0xffffa41f8018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa423f000. Read at address 0x00600018 (0xffffa423f018): 0x00000000 Write at address 0x00600018 (0xffffa423f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8bee7000. Read at address 0x00600018 (0xffff8bee7018): 0x00000000 Write at address 0x00600018 (0xffff8bee7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86a0e000. Read at address 0x00600018 (0xffff86a0e018): 0x00000000 Write at address 0x00600018 (0xffff86a0e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb63b8000. Read at address 0x00600018 (0xffffb63b8018): 0x00000000 Write at address 0x00600018 (0xffffb63b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff90055000. Read at address 0x00600018 (0xffff90055018): 0x00000000 Write at address 0x00600018 (0xffff90055018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85d18000. Read at address 0x00600018 (0xffff85d18018): 0x00000000 Write at address 0x00600018 (0xffff85d18018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90e1d000. Read at address 0x00600018 (0xffff90e1d018): 0x00000000 Write at address 0x00600018 (0xffff90e1d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff862b9000. Read at address 0x00600018 (0xffff862b9018): 0x00000000 Write at address 0x00600018 (0xffff862b9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8096f000. Read at address 0x00600018 (0xffff8096f018): 0x00000000 Write at address 0x00600018 (0xffff8096f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a7dd000. Read at address 0x00600018 (0xffff9a7dd018): 0x00000000 Write at address 0x00600018 (0xffff9a7dd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83444000. Read at address 0x00600018 (0xffff83444018): 0x00000000 Write at address 0x00600018 (0xffff83444018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb4988000. Read at address 0x00600018 (0xffffb4988018): 0x00000000 Write at address 0x00600018 (0xffffb4988018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8743d000. Read at address 0x00600018 (0xffff8743d018): 0x00000000 Write at address 0x00600018 (0xffff8743d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa1b16000. Read at address 0x00600018 (0xffffa1b16018): 0x00000000 Write at address 0x00600018 (0xffffa1b16018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb9d03000. Read at address 0x00600018 (0xffffb9d03018): 0x00000000 Write at address 0x00600018 (0xffffb9d03018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8971d000. Read at address 0x00600018 (0xffff8971d018): 0x00000000 Write at address 0x00600018 (0xffff8971d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c246000. Read at address 0x00600018 (0xffff8c246018): 0x00000000 Write at address 0x00600018 (0xffff8c246018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8cd9d000. Read at address 0x00600018 (0xffff8cd9d018): 0x00000000 Write at address 0x00600018 (0xffff8cd9d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff895c1000. Read at address 0x00600018 (0xffff895c1018): 0x00000000 Write at address 0x00600018 (0xffff895c1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c566000. Read at address 0x00600018 (0xffff9c566018): 0x00000000 Write at address 0x00600018 (0xffff9c566018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffba7e7000. Read at address 0x00600018 (0xffffba7e7018): 0x00000000 Write at address 0x00600018 (0xffffba7e7018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90462000. Read at address 0x00600018 (0xffff90462018): 0x00000000 Write at address 0x00600018 (0xffff90462018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb8b0f000. Read at address 0x00600018 (0xffffb8b0f018): 0x00000000 Write at address 0x00600018 (0xffffb8b0f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb01cb000. Read at address 0x00600018 (0xffffb01cb018): 0x00000000 Write at address 0x00600018 (0xffffb01cb018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff87edf000. Read at address 0x00600018 (0xffff87edf018): 0x00000000 Write at address 0x00600018 (0xffff87edf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa03ef000. Read at address 0x00600018 (0xffffa03ef018): 0x00000000 Write at address 0x00600018 (0xffffa03ef018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f320000. Read at address 0x00600018 (0xffff9f320018): 0x00000000 Write at address 0x00600018 (0xffff9f320018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e09e000. Read at address 0x00600018 (0xffff9e09e018): 0x00000000 Write at address 0x00600018 (0xffff9e09e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95fea000. Read at address 0x00600018 (0xffff95fea018): 0x00000000 Write at address 0x00600018 (0xffff95fea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7771000. Read at address 0x00600018 (0xffffb7771018): 0x00000000 Write at address 0x00600018 (0xffffb7771018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff82919000. Read at address 0x00600018 (0xffff82919018): 0x00000000 Write at address 0x00600018 (0xffff82919018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 net.ipv6.conf.all.disable_ipv6 = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbded0000. Read at address 0x00600018 (0xffffbded0018): 0x00000000 Write at address 0x00600018 (0xffffbded0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi2:animations is mounted. ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9dab6000. Read at address 0x00600018 (0xffff9dab6018): 0x00000000 Write at address 0x00600018 (0xffff9dab6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2889000. Read at address 0x00600018 (0xffffa2889018): 0x00000000 Write at address 0x00600018 (0xffffa2889018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9113000. Read at address 0x00600018 (0xffffa9113018): 0x00000000 Write at address 0x00600018 (0xffffa9113018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa12dc000. Read at address 0x00600018 (0xffffa12dc018): 0x00000000 Write at address 0x00600018 (0xffffa12dc018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 ubi2:dml_code is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9b1d1000. Read at address 0x00600018 (0xffff9b1d1018): 0x00000000 Write at address 0x00600018 (0xffff9b1d1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8d2c000. Read at address 0x00600018 (0xffffa8d2c018): 0x00000000 Write at address 0x00600018 (0xffffa8d2c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffabcc0000. Read at address 0x00600018 (0xffffabcc0018): 0x00000000 Write at address 0x00600018 (0xffffabcc0018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffacaad000. Read at address 0x00600018 (0xffffacaad018): 0x00000000 Write at address 0x00600018 (0xffffacaad018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf6b1000. Read at address 0x00600018 (0xffffaf6b1018): 0x00000000 Write at address 0x00600018 (0xffffaf6b1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6232000. Read at address 0x00600018 (0xffffb6232018): 0x00000000 Write at address 0x00600018 (0xffffb6232018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9fccf000. Read at address 0x00600018 (0xffff9fccf018): 0x00000000 Write at address 0x00600018 (0xffff9fccf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbf40a000. Read at address 0x00600018 (0xffffbf40a018): 0x00000000 Write at address 0x00600018 (0xffffbf40a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbc641000. Read at address 0x00600018 (0xffffbc641018): 0x00000000 Write at address 0x00600018 (0xffffbc641018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa338e000. Read at address 0x00600018 (0xffffa338e018): 0x00000000 Write at address 0x00600018 (0xffffa338e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c109000. Read at address 0x00600018 (0xffff9c109018): 0x00000000 Write at address 0x00600018 (0xffff9c109018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6001000. Read at address 0x00600018 (0xffffa6001018): 0x00000000 Write at address 0x00600018 (0xffffa6001018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbee0b000. Read at address 0x00600018 (0xffffbee0b018): 0x00000000 Write at address 0x00600018 (0xffffbee0b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff84aab000. Read at address 0x00600018 (0xffff84aab018): 0x00000000 Write at address 0x00600018 (0xffff84aab018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c386000. Read at address 0x00600018 (0xffff8c386018): 0x00000000 Write at address 0x00600018 (0xffff8c386018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaeacf000. Read at address 0x00600018 (0xffffaeacf018): 0x00000000 Write at address 0x00600018 (0xffffaeacf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8822e000. Read at address 0x00600018 (0xffff8822e018): 0x00000000 Write at address 0x00600018 (0xffff8822e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbad74000. Read at address 0x00600018 (0xffffbad74018): 0x00000000 Write at address 0x00600018 (0xffffbad74018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9f8d6000. Read at address 0x00600018 (0xffff9f8d6018): 0x00000000 Write at address 0x00600018 (0xffff9f8d6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6a46000. Read at address 0x00600018 (0xffffa6a46018): 0x00000000 Write at address 0x00600018 (0xffffa6a46018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb869b000. Read at address 0x00600018 (0xffffb869b018): 0x00000000 Write at address 0x00600018 (0xffffb869b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa633c000. Read at address 0x00600018 (0xffffa633c018): 0x00000000 Write at address 0x00600018 (0xffffa633c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff91080000. Read at address 0x00600018 (0xffff91080018): 0x00000000 Write at address 0x00600018 (0xffff91080018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb4f31000. Read at address 0x00600018 (0xffffb4f31018): 0x00000000 Write at address 0x00600018 (0xffffb4f31018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d1f8000. Read at address 0x00600018 (0xffff8d1f8018): 0x00000000 Write at address 0x00600018 (0xffff8d1f8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9227c000. Read at address 0x00600018 (0xffff9227c018): 0x00000000 Write at address 0x00600018 (0xffff9227c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad2c6000. Read at address 0x00600018 (0xffffad2c6018): 0x00000000 Write at address 0x00600018 (0xffffad2c6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffacd01000. Read at address 0x00600018 (0xffffacd01018): 0x00000000 Write at address 0x00600018 (0xffffacd01018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9b441000. Read at address 0x00600018 (0xffff9b441018): 0x00000000 Write at address 0x00600018 (0xffff9b441018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa3cdd000. Read at address 0x00600018 (0xffffa3cdd018): 0x00000000 Write at address 0x00600018 (0xffffa3cdd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96ed5000. Read at address 0x00600018 (0xffff96ed5018): 0x00000000 Write at address 0x00600018 (0xffff96ed5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff928ef000. Read at address 0x00600018 (0xffff928ef018): 0x00000000 Write at address 0x00600018 (0xffff928ef018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5076000. Read at address 0x00600018 (0xffffa5076018): 0x00000000 Write at address 0x00600018 (0xffffa5076018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa125000. Read at address 0x00600018 (0xffffaa125018): 0x00000000 Write at address 0x00600018 (0xffffaa125018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaea5d000. Read at address 0x00600018 (0xffffaea5d018): 0x00000000 Write at address 0x00600018 (0xffffaea5d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd5c1000. Read at address 0x00600018 (0xffffbd5c1018): 0x00000000 Write at address 0x00600018 (0xffffbd5c1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff89d13000. Read at address 0x00600018 (0xffff89d13018): 0x00000000 Write at address 0x00600018 (0xffff89d13018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff835d2000. Read at address 0x00600018 (0xffff835d2018): 0x00000000 Write at address 0x00600018 (0xffff835d2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb2e1e000. Read at address 0x00600018 (0xffffb2e1e018): 0x00000000 Write at address 0x00600018 (0xffffb2e1e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ec0a000. Read at address 0x00600018 (0xffff8ec0a018): 0x00000000 Write at address 0x00600018 (0xffff8ec0a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff949db000. Read at address 0x00600018 (0xffff949db018): 0x00000000 Write at address 0x00600018 (0xffff949db018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97e82000. Read at address 0x00600018 (0xffff97e82018): 0x00000000 Write at address 0x00600018 (0xffff97e82018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2ecd000. Read at address 0x00600018 (0xffffa2ecd018): 0x00000000 Write at address 0x00600018 (0xffffa2ecd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc38f000. Read at address 0x00600018 (0xffffbc38f018): 0x00000000 Write at address 0x00600018 (0xffffbc38f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9326d000. Read at address 0x00600018 (0xffff9326d018): 0x00000000 Write at address 0x00600018 (0xffff9326d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ebeb000. Read at address 0x00600018 (0xffff9ebeb018): 0x00000000 Write at address 0x00600018 (0xffff9ebeb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb7375000. Read at address 0x00600018 (0xffffb7375018): 0x00000000 Write at address 0x00600018 (0xffffb7375018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa088d000. Read at address 0x00600018 (0xffffa088d018): 0x00000000 Write at address 0x00600018 (0xffffa088d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa44ea000. Read at address 0x00600018 (0xffffa44ea018): 0x00000000 Write at address 0x00600018 (0xffffa44ea018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa4736000. Read at address 0x00600018 (0xffffa4736018): 0x00000000 Write at address 0x00600018 (0xffffa4736018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa52cb000. Read at address 0x00600018 (0xffffa52cb018): 0x00000000 Write at address 0x00600018 (0xffffa52cb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fc2c000. Read at address 0x00600018 (0xffff7fc2c018): 0x00000000 Write at address 0x00600018 (0xffff7fc2c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81013000. Read at address 0x00600018 (0xffff81013018): 0x00000000 Write at address 0x00600018 (0xffff81013018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fa55000. Read at address 0x00600018 (0xffff8fa55018): 0x00000000 Write at address 0x00600018 (0xffff8fa55018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99143000. Read at address 0x00600018 (0xffff99143018): 0x00000000 Write at address 0x00600018 (0xffff99143018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c465000. Read at address 0x00600018 (0xffff8c465018): 0x00000000 Write at address 0x00600018 (0xffff8c465018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92a8a000. Read at address 0x00600018 (0xffff92a8a018): 0x00000000 Write at address 0x00600018 (0xffff92a8a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff96bf1000. Read at address 0x00600018 (0xffff96bf1018): 0x00000000 Write at address 0x00600018 (0xffff96bf1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab463000. Read at address 0x00600018 (0xffffab463018): 0x00000000 Write at address 0x00600018 (0xffffab463018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffad3c0000. Read at address 0x00600018 (0xffffad3c0018): 0x00000000 Write at address 0x00600018 (0xffffad3c0018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9cec000. Read at address 0x00600018 (0xffffb9cec018): 0x00000000 Write at address 0x00600018 (0xffffb9cec018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff96904000. Read at address 0x00600018 (0xffff96904018): 0x00000000 Write at address 0x00600018 (0xffff96904018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97315000. Read at address 0x00600018 (0xffff97315018): 0x00000000 Write at address 0x00600018 (0xffff97315018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95a2b000. Read at address 0x00600018 (0xffff95a2b018): 0x00000000 Write at address 0x00600018 (0xffff95a2b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf568000. Read at address 0x00600018 (0xffffaf568018): 0x00000000 Write at address 0x00600018 (0xffffaf568018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffac484000. Read at address 0x00600018 (0xffffac484018): 0x00000000 Write at address 0x00600018 (0xffffac484018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb7f4a000. Read at address 0x00600018 (0xffffb7f4a018): 0x00000000 Write at address 0x00600018 (0xffffb7f4a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa29ee000. Read at address 0x00600018 (0xffffa29ee018): 0x00000000 Write at address 0x00600018 (0xffffa29ee018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9757000. Read at address 0x00600018 (0xffffb9757018): 0x00000000 Write at address 0x00600018 (0xffffb9757018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93f20000. Read at address 0x00600018 (0xffff93f20018): 0x00000000 Write at address 0x00600018 (0xffff93f20018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa6443000. Read at address 0x00600018 (0xffffa6443018): 0x00000000 Write at address 0x00600018 (0xffffa6443018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8779f000. Read at address 0x00600018 (0xffff8779f018): 0x00000000 Write at address 0x00600018 (0xffff8779f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc7ba000. Read at address 0x00600018 (0xffffbc7ba018): 0x00000000 Write at address 0x00600018 (0xffffbc7ba018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80507000. Read at address 0x00600018 (0xffff80507018): 0x00000000 Write at address 0x00600018 (0xffff80507018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e57c000. Read at address 0x00600018 (0xffff8e57c018): 0x00000000 Write at address 0x00600018 (0xffff8e57c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3dc9000. Read at address 0x00600018 (0xffffa3dc9018): 0x00000000 Write at address 0x00600018 (0xffffa3dc9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b7b4000. Read at address 0x00600018 (0xffff8b7b4018): 0x00000000 Write at address 0x00600018 (0xffff8b7b4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff869b7000. Read at address 0x00600018 (0xffff869b7018): 0x00000000 Write at address 0x00600018 (0xffff869b7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0a6d000. Read at address 0x00600018 (0xffffb0a6d018): 0x00000000 Write at address 0x00600018 (0xffffb0a6d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff87631000. Read at address 0x00600018 (0xffff87631018): 0x00000000 Write at address 0x00600018 (0xffff87631018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91fd3000. Read at address 0x00600018 (0xffff91fd3018): 0x00000000 Write at address 0x00600018 (0xffff91fd3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb2fc000. Read at address 0x00600018 (0xffffbb2fc018): 0x00000000 Write at address 0x00600018 (0xffffbb2fc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa8a5c000. Read at address 0x00600018 (0xffffa8a5c018): 0x00000000 Write at address 0x00600018 (0xffffa8a5c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffacacb000. Read at address 0x00600018 (0xffffacacb018): 0x00000000 Write at address 0x00600018 (0xffffacacb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9709b000. Read at address 0x00600018 (0xffff9709b018): 0x00000000 Write at address 0x00600018 (0xffff9709b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa14f4000. Read at address 0x00600018 (0xffffa14f4018): 0x00000000 Write at address 0x00600018 (0xffffa14f4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff91e5b000. Read at address 0x00600018 (0xffff91e5b018): 0x00000000 Write at address 0x00600018 (0xffff91e5b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabe0f000. Read at address 0x00600018 (0xffffabe0f018): 0x00000000 Write at address 0x00600018 (0xffffabe0f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f23b000. Read at address 0x00600018 (0xffff9f23b018): 0x00000000 Write at address 0x00600018 (0xffff9f23b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 236 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaabdc000. Read at address 0x00600018 (0xffffaabdc018): 0x00000000 Write at address 0x00600018 (0xffffaabdc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cc69000. Read at address 0x00600018 (0xffff9cc69018): 0x00000000 Write at address 0x00600018 (0xffff9cc69018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d1d3000. Read at address 0x00600018 (0xffff9d1d3018): 0x00000000 Write at address 0x00600018 (0xffff9d1d3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff90fa5000. Read at address 0x00600018 (0xffff90fa5018): 0x00000000 Write at address 0x00600018 (0xffff90fa5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91eb1000. Read at address 0x00600018 (0xffff91eb1018): 0x00000000 Write at address 0x00600018 (0xffff91eb1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff82fcf000. Read at address 0x00600018 (0xffff82fcf018): 0x00000000 Write at address 0x00600018 (0xffff82fcf018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95853000. Read at address 0x00600018 (0xffff95853018): 0x00000000 Write at address 0x00600018 (0xffff95853018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbb48a000. Read at address 0x00600018 (0xffffbb48a018): 0x00000000 Write at address 0x00600018 (0xffffbb48a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9e11e000. Read at address 0x00600018 (0xffff9e11e018): 0x00000000 Write at address 0x00600018 (0xffff9e11e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9dc59000. Read at address 0x00600018 (0xffff9dc59018): 0x00000000 Write at address 0x00600018 (0xffff9dc59018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad402000. Read at address 0x00600018 (0xffffad402018): 0x00000000 Write at address 0x00600018 (0xffffad402018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffadec4000. Read at address 0x00600018 (0xffffadec4018): 0x00000000 Write at address 0x00600018 (0xffffadec4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff93e7a000. Read at address 0x00600018 (0xffff93e7a018): 0x00000000 Write at address 0x00600018 (0xffff93e7a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92be1000. Read at address 0x00600018 (0xffff92be1018): 0x00000000 Write at address 0x00600018 (0xffff92be1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82715000. Read at address 0x00600018 (0xffff82715018): 0x00000000 Write at address 0x00600018 (0xffff82715018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7966000. Read at address 0x00600018 (0xffffa7966018): 0x00000000 Write at address 0x00600018 (0xffffa7966018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff80c91000. Read at address 0x00600018 (0xffff80c91018): 0x00000000 Write at address 0x00600018 (0xffff80c91018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6d96000. Read at address 0x00600018 (0xffffb6d96018): 0x00000000 Write at address 0x00600018 (0xffffb6d96018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb68da000. Read at address 0x00600018 (0xffffb68da018): 0x00000000 Write at address 0x00600018 (0xffffb68da018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff946ea000. Read at address 0x00600018 (0xffff946ea018): 0x00000000 Write at address 0x00600018 (0xffff946ea018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 236 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85816000. Read at address 0x00600018 (0xffff85816018): 0x00000000 Write at address 0x00600018 (0xffff85816018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8268a000. Read at address 0x00600018 (0xffff8268a018): 0x00000000 Write at address 0x00600018 (0xffff8268a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83f5b000. Read at address 0x00600018 (0xffff83f5b018): 0x00000000 Write at address 0x00600018 (0xffff83f5b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82ca0000. Read at address 0x00600018 (0xffff82ca0018): 0x00000000 Write at address 0x00600018 (0xffff82ca0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1668000. Read at address 0x00600018 (0xffffb1668018): 0x00000000 Write at address 0x00600018 (0xffffb1668018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa557e000. Read at address 0x00600018 (0xffffa557e018): 0x00000000 Write at address 0x00600018 (0xffffa557e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95a37000. Read at address 0x00600018 (0xffff95a37018): 0x00000000 Write at address 0x00600018 (0xffff95a37018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff915df000. Read at address 0x00600018 (0xffff915df018): 0x00000000 Write at address 0x00600018 (0xffff915df018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa6628000. Read at address 0x00600018 (0xffffa6628018): 0x00000000 Write at address 0x00600018 (0xffffa6628018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa99f7000. Read at address 0x00600018 (0xffffa99f7018): 0x00000000 Write at address 0x00600018 (0xffffa99f7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa461a000. Read at address 0x00600018 (0xffffa461a018): 0x00000000 Write at address 0x00600018 (0xffffa461a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0583000. Read at address 0x00600018 (0xffffa0583018): 0x00000000 Write at address 0x00600018 (0xffffa0583018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa299c000. Read at address 0x00600018 (0xffffa299c018): 0x00000000 Write at address 0x00600018 (0xffffa299c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa3b93000. Read at address 0x00600018 (0xffffa3b93018): 0x00000000 Write at address 0x00600018 (0xffffa3b93018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96bb1000. Read at address 0x00600018 (0xffff96bb1018): 0x00000000 Write at address 0x00600018 (0xffff96bb1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb5478000. Read at address 0x00600018 (0xffffb5478018): 0x00000000 Write at address 0x00600018 (0xffffb5478018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8688000. Read at address 0x00600018 (0xffffb8688018): 0x00000000 Write at address 0x00600018 (0xffffb8688018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9773d000. Read at address 0x00600018 (0xffff9773d018): 0x00000000 Write at address 0x00600018 (0xffff9773d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb4e82000. Read at address 0x00600018 (0xffffb4e82018): 0x00000000 Write at address 0x00600018 (0xffffb4e82018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9f88a000. Read at address 0x00600018 (0xffff9f88a018): 0x00000000 Write at address 0x00600018 (0xffff9f88a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa752d000. Read at address 0x00600018 (0xffffa752d018): 0x00000000 Write at address 0x00600018 (0xffffa752d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2116000. Read at address 0x00600018 (0xffffa2116018): 0x00000000 Write at address 0x00600018 (0xffffa2116018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff97ecc000. Read at address 0x00600018 (0xffff97ecc018): 0x00000000 Write at address 0x00600018 (0xffff97ecc018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0f97000. Read at address 0x00600018 (0xffffb0f97018): 0x00000000 Write at address 0x00600018 (0xffffb0f97018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb946b000. Read at address 0x00600018 (0xffffb946b018): 0x00000000 Write at address 0x00600018 (0xffffb946b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb2a76000. Read at address 0x00600018 (0xffffb2a76018): 0x00000000 Write at address 0x00600018 (0xffffb2a76018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff93db6000. Read at address 0x00600018 (0xffff93db6018): 0x00000000 Write at address 0x00600018 (0xffff93db6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f5d0000. Read at address 0x00600018 (0xffff9f5d0018): 0x00000000 Write at address 0x00600018 (0xffff9f5d0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86319000. Read at address 0x00600018 (0xffff86319018): 0x00000000 Write at address 0x00600018 (0xffff86319018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9889c000. Read at address 0x00600018 (0xffff9889c018): 0x00000000 Write at address 0x00600018 (0xffff9889c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3396000. Read at address 0x00600018 (0xffffb3396018): 0x00000000 Write at address 0x00600018 (0xffffb3396018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff99363000. Read at address 0x00600018 (0xffff99363018): 0x00000000 Write at address 0x00600018 (0xffff99363018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91307000. Read at address 0x00600018 (0xffff91307018): 0x00000000 Write at address 0x00600018 (0xffff91307018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff98aa4000. Read at address 0x00600018 (0xffff98aa4018): 0x00000000 Write at address 0x00600018 (0xffff98aa4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90d25000. Read at address 0x00600018 (0xffff90d25018): 0x00000000 Write at address 0x00600018 (0xffff90d25018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8a719000. Read at address 0x00600018 (0xffff8a719018): 0x00000000 Write at address 0x00600018 (0xffff8a719018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98cf6000. Read at address 0x00600018 (0xffff98cf6018): 0x00000000 Write at address 0x00600018 (0xffff98cf6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89148000. Read at address 0x00600018 (0xffff89148018): 0x00000000 Write at address 0x00600018 (0xffff89148018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff903ce000. Read at address 0x00600018 (0xffff903ce018): 0x00000000 Write at address 0x00600018 (0xffff903ce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff87706000. Read at address 0x00600018 (0xffff87706018): 0x00000000 Write at address 0x00600018 (0xffff87706018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaf057000. Read at address 0x00600018 (0xffffaf057018): 0x00000000 Write at address 0x00600018 (0xffffaf057018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa08dc000. Read at address 0x00600018 (0xffffa08dc018): 0x00000000 Write at address 0x00600018 (0xffffa08dc018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac8a2000. Read at address 0x00600018 (0xffffac8a2018): 0x00000000 Write at address 0x00600018 (0xffffac8a2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90b7e000. Read at address 0x00600018 (0xffff90b7e018): 0x00000000 Write at address 0x00600018 (0xffff90b7e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8d337000. Read at address 0x00600018 (0xffff8d337018): 0x00000000 Write at address 0x00600018 (0xffff8d337018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb0b62000. Read at address 0x00600018 (0xffffb0b62018): 0x00000000 Write at address 0x00600018 (0xffffb0b62018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa348000. Read at address 0x00600018 (0xffffaa348018): 0x00000000 Write at address 0x00600018 (0xffffaa348018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff93881000. Read at address 0x00600018 (0xffff93881018): 0x00000000 Write at address 0x00600018 (0xffff93881018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff803f4000. Read at address 0x00600018 (0xffff803f4018): 0x00000000 Write at address 0x00600018 (0xffff803f4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa299a000. Read at address 0x00600018 (0xffffa299a018): 0x00000000 Write at address 0x00600018 (0xffffa299a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a0b4000. Read at address 0x00600018 (0xffff9a0b4018): 0x00000000 Write at address 0x00600018 (0xffff9a0b4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93dcd000. Read at address 0x00600018 (0xffff93dcd018): 0x00000000 Write at address 0x00600018 (0xffff93dcd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. ubi1:textures is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffad73a000. Read at address 0x00600018 (0xffffad73a018): 0x00000000 Write at address 0x00600018 (0xffffad73a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97ec8000. Read at address 0x00600018 (0xffff97ec8018): 0x00000000 Write at address 0x00600018 (0xffff97ec8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4753000. Read at address 0x00600018 (0xffffa4753018): 0x00000000 Write at address 0x00600018 (0xffffa4753018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2e6d000. Read at address 0x00600018 (0xffffb2e6d018): 0x00000000 Write at address 0x00600018 (0xffffb2e6d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82c9b000. Read at address 0x00600018 (0xffff82c9b018): 0x00000000 Write at address 0x00600018 (0xffff82c9b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffba1d8000. Read at address 0x00600018 (0xffffba1d8018): 0x00000000 Write at address 0x00600018 (0xffffba1d8018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa577e000. Read at address 0x00600018 (0xffffa577e018): 0x00000000 Write at address 0x00600018 (0xffffa577e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe86b000. Read at address 0x00600018 (0xffffbe86b018): 0x00000000 Write at address 0x00600018 (0xffffbe86b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa966b000. Read at address 0x00600018 (0xffffa966b018): 0x00000000 Write at address 0x00600018 (0xffffa966b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8595000. Read at address 0x00600018 (0xffffb8595018): 0x00000000 Write at address 0x00600018 (0xffffb8595018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff95e42000. Read at address 0x00600018 (0xffff95e42018): 0x00000000 Write at address 0x00600018 (0xffff95e42018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7474000. Read at address 0x00600018 (0xffffb7474018): 0x00000000 Write at address 0x00600018 (0xffffb7474018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb2417000. Read at address 0x00600018 (0xffffb2417018): 0x00000000 Write at address 0x00600018 (0xffffb2417018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2d21000. Read at address 0x00600018 (0xffffb2d21018): 0x00000000 Write at address 0x00600018 (0xffffb2d21018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc997000. Read at address 0x00600018 (0xffffbc997018): 0x00000000 Write at address 0x00600018 (0xffffbc997018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff87c0e000. Read at address 0x00600018 (0xffff87c0e018): 0x00000000 Write at address 0x00600018 (0xffff87c0e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff880c6000. Read at address 0x00600018 (0xffff880c6018): 0x00000000 Write at address 0x00600018 (0xffff880c6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa9b2000. Read at address 0x00600018 (0xffffaa9b2018): 0x00000000 Write at address 0x00600018 (0xffffaa9b2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf1a7000. Read at address 0x00600018 (0xffffbf1a7018): 0x00000000 Write at address 0x00600018 (0xffffbf1a7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae9d2000. Read at address 0x00600018 (0xffffae9d2018): 0x00000000 Write at address 0x00600018 (0xffffae9d2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff891c1000. Read at address 0x00600018 (0xffff891c1018): 0x00000000 Write at address 0x00600018 (0xffff891c1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa98c0000. Read at address 0x00600018 (0xffffa98c0018): 0x00000000 Write at address 0x00600018 (0xffffa98c0018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffaf321000. Read at address 0x00600018 (0xffffaf321018): 0x00000000 Write at address 0x00600018 (0xffffaf321018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89f2d000. Read at address 0x00600018 (0xffff89f2d018): 0x00000000 Write at address 0x00600018 (0xffff89f2d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2fed000. Read at address 0x00600018 (0xffffb2fed018): 0x00000000 Write at address 0x00600018 (0xffffb2fed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen net.ipv6.conf.eth0.dad_transmits = 0 stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb6def000. Read at address 0x00600018 (0xffffb6def018): 0x00000000 Write at address 0x00600018 (0xffffb6def018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9109a000. Read at address 0x00600018 (0xffff9109a018): 0x00000000 Write at address 0x00600018 (0xffff9109a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff810de000. Read at address 0x00600018 (0xffff810de018): 0x00000000 Write at address 0x00600018 (0xffff810de018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff99155000. Read at address 0x00600018 (0xffff99155018): 0x00000000 Write at address 0x00600018 (0xffff99155018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaee27000. Read at address 0x00600018 (0xffffaee27018): 0x00000000 Write at address 0x00600018 (0xffffaee27018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cc05000. Read at address 0x00600018 (0xffff9cc05018): 0x00000000 Write at address 0x00600018 (0xffff9cc05018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa93e4000. Read at address 0x00600018 (0xffffa93e4018): 0x00000000 Write at address 0x00600018 (0xffffa93e4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9ccdf000. Read at address 0x00600018 (0xffff9ccdf018): 0x00000000 Write at address 0x00600018 (0xffff9ccdf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95c46000. Read at address 0x00600018 (0xffff95c46018): 0x00000000 Write at address 0x00600018 (0xffff95c46018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92608000. Read at address 0x00600018 (0xffff92608018): 0x00000000 Write at address 0x00600018 (0xffff92608018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d8b9000. Read at address 0x00600018 (0xffff8d8b9018): 0x00000000 Write at address 0x00600018 (0xffff8d8b9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff888aa000. Read at address 0x00600018 (0xffff888aa018): 0x00000000 Write at address 0x00600018 (0xffff888aa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbe899000. Read at address 0x00600018 (0xffffbe899018): 0x00000000 Write at address 0x00600018 (0xffffbe899018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff839ff000. Read at address 0x00600018 (0xffff839ff018): 0x00000000 Write at address 0x00600018 (0xffff839ff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa9bd5000. Read at address 0x00600018 (0xffffa9bd5018): 0x00000000 Write at address 0x00600018 (0xffffa9bd5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff81db9000. Read at address 0x00600018 (0xffff81db9018): 0x00000000 Write at address 0x00600018 (0xffff81db9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa293f000. Read at address 0x00600018 (0xffffa293f018): 0x00000000 Write at address 0x00600018 (0xffffa293f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae2b4000. Read at address 0x00600018 (0xffffae2b4018): 0x00000000 Write at address 0x00600018 (0xffffae2b4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98228000. Read at address 0x00600018 (0xffff98228018): 0x00000000 Write at address 0x00600018 (0xffff98228018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 net.ipv6.conf.all.disable_ipv6 = 0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb647c000. Read at address 0x00600018 (0xffffb647c018): 0x00000000 Write at address 0x00600018 (0xffffb647c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa3176000. Read at address 0x00600018 (0xffffa3176018): 0x00000000 Write at address 0x00600018 (0xffffa3176018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0c93000. Read at address 0x00600018 (0xffffa0c93018): 0x00000000 Write at address 0x00600018 (0xffffa0c93018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94d09000. Read at address 0x00600018 (0xffff94d09018): 0x00000000 Write at address 0x00600018 (0xffff94d09018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b63d000. Read at address 0x00600018 (0xffff9b63d018): 0x00000000 Write at address 0x00600018 (0xffff9b63d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf24b000. Read at address 0x00600018 (0xffffbf24b018): 0x00000000 Write at address 0x00600018 (0xffffbf24b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffba4a9000. Read at address 0x00600018 (0xffffba4a9018): 0x00000000 Write at address 0x00600018 (0xffffba4a9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9905d000. Read at address 0x00600018 (0xffff9905d018): 0x00000000 Write at address 0x00600018 (0xffff9905d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82a7d000. Read at address 0x00600018 (0xffff82a7d018): 0x00000000 Write at address 0x00600018 (0xffff82a7d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa0e03000. Read at address 0x00600018 (0xffffa0e03018): 0x00000000 Write at address 0x00600018 (0xffffa0e03018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98007000. Read at address 0x00600018 (0xffff98007018): 0x00000000 Write at address 0x00600018 (0xffff98007018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb675a000. Read at address 0x00600018 (0xffffb675a018): 0x00000000 Write at address 0x00600018 (0xffffb675a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start 1736 GC [0] 1806 GC [1] Esel version: 3.102.0.0-IAA10.27 1867 GC [2] 1946 GC [3] 2028 GC [4] 2096 GC [5] 2169 GC [6] 2225 GC [7] 2306 GC [8] 2359 GC [9] 2447 GC [10] 2529 GC [11] 2615 GC [12] DML res1: 0 2730 GC [13] 2878 GC [14] 3040 GC [15] 3216 GC [16] Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... 3328 GC [17] 3449 GC [18] 3580 GC [19] SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff87903000. Read at address 0x00600018 (0xffff87903018): 0x00000000 Write at address 0x00600018 (0xffff87903018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93a94000. Read at address 0x00600018 (0xffff93a94018): 0x00000000 Write at address 0x00600018 (0xffff93a94018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91dbd000. Read at address 0x00600018 (0xffff91dbd018): 0x00000000 Write at address 0x00600018 (0xffff91dbd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaecbb000. Read at address 0x00600018 (0xffffaecbb018): 0x00000000 Write at address 0x00600018 (0xffffaecbb018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8df36000. Read at address 0x00600018 (0xffff8df36018): 0x00000000 Write at address 0x00600018 (0xffff8df36018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90bdf000. Read at address 0x00600018 (0xffff90bdf018): 0x00000000 Write at address 0x00600018 (0xffff90bdf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8691b000. Read at address 0x00600018 (0xffff8691b018): 0x00000000 Write at address 0x00600018 (0xffff8691b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbcfb7000. Read at address 0x00600018 (0xffffbcfb7018): 0x00000000 Write at address 0x00600018 (0xffffbcfb7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9806d000. Read at address 0x00600018 (0xffff9806d018): 0x00000000 Write at address 0x00600018 (0xffff9806d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9bf7000. Read at address 0x00600018 (0xffffb9bf7018): 0x00000000 Write at address 0x00600018 (0xffffb9bf7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffac49f000. Read at address 0x00600018 (0xffffac49f018): 0x00000000 Write at address 0x00600018 (0xffffac49f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb32b5000. Read at address 0x00600018 (0xffffb32b5018): 0x00000000 Write at address 0x00600018 (0xffffb32b5018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87c81000. Read at address 0x00600018 (0xffff87c81018): 0x00000000 Write at address 0x00600018 (0xffff87c81018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ffe4000. Read at address 0x00600018 (0xffff8ffe4018): 0x00000000 Write at address 0x00600018 (0xffff8ffe4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82189000. Read at address 0x00600018 (0xffff82189018): 0x00000000 Write at address 0x00600018 (0xffff82189018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba42a000. Read at address 0x00600018 (0xffffba42a018): 0x00000000 Write at address 0x00600018 (0xffffba42a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbe98c000. Read at address 0x00600018 (0xffffbe98c018): 0x00000000 Write at address 0x00600018 (0xffffbe98c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8b6e000. Read at address 0x00600018 (0xffffb8b6e018): 0x00000000 Write at address 0x00600018 (0xffffb8b6e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb9df6000. Read at address 0x00600018 (0xffffb9df6018): 0x00000000 Write at address 0x00600018 (0xffffb9df6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a8c2000. Read at address 0x00600018 (0xffff9a8c2018): 0x00000000 Write at address 0x00600018 (0xffff9a8c2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa91e8000. Read at address 0x00600018 (0xffffa91e8018): 0x00000000 Write at address 0x00600018 (0xffffa91e8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98871000. Read at address 0x00600018 (0xffff98871018): 0x00000000 Write at address 0x00600018 (0xffff98871018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaaf62000. Read at address 0x00600018 (0xffffaaf62018): 0x00000000 Write at address 0x00600018 (0xffffaaf62018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5e19000. Read at address 0x00600018 (0xffffa5e19018): 0x00000000 Write at address 0x00600018 (0xffffa5e19018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ffeb000. Read at address 0x00600018 (0xffff8ffeb018): 0x00000000 Write at address 0x00600018 (0xffff8ffeb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb679b000. Read at address 0x00600018 (0xffffb679b018): 0x00000000 Write at address 0x00600018 (0xffffb679b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6613000. Read at address 0x00600018 (0xffffb6613018): 0x00000000 Write at address 0x00600018 (0xffffb6613018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff976a5000. Read at address 0x00600018 (0xffff976a5018): 0x00000000 Write at address 0x00600018 (0xffff976a5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0e1d000. Read at address 0x00600018 (0xffffa0e1d018): 0x00000000 Write at address 0x00600018 (0xffffa0e1d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb0bc7000. Read at address 0x00600018 (0xffffb0bc7018): 0x00000000 Write at address 0x00600018 (0xffffb0bc7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a473000. Read at address 0x00600018 (0xffff8a473018): 0x00000000 Write at address 0x00600018 (0xffff8a473018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86973000. Read at address 0x00600018 (0xffff86973018): 0x00000000 Write at address 0x00600018 (0xffff86973018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. net.ipv6.conf.all.addr_gen_mode = 0 Memory mapped at address 0xffff991e2000. Read at address 0x00600018 (0xffff991e2018): 0x00000000 Write at address 0x00600018 (0xffff991e2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa32e2000. Read at address 0x00600018 (0xffffa32e2018): 0x00000000 Write at address 0x00600018 (0xffffa32e2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b707000. Read at address 0x00600018 (0xffff8b707018): 0x00000000 Write at address 0x00600018 (0xffff8b707018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c2ef000. Read at address 0x00600018 (0xffff9c2ef018): 0x00000000 Write at address 0x00600018 (0xffff9c2ef018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93547000. Read at address 0x00600018 (0xffff93547018): 0x00000000 Write at address 0x00600018 (0xffff93547018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa589f000. Read at address 0x00600018 (0xffffa589f018): 0x00000000 Write at address 0x00600018 (0xffffa589f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb2081000. Read at address 0x00600018 (0xffffb2081018): 0x00000000 Write at address 0x00600018 (0xffffb2081018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbed8e000. Read at address 0x00600018 (0xffffbed8e018): 0x00000000 Write at address 0x00600018 (0xffffbed8e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff832c9000. Read at address 0x00600018 (0xffff832c9018): 0x00000000 Write at address 0x00600018 (0xffff832c9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8efef000. Read at address 0x00600018 (0xffff8efef018): 0x00000000 Write at address 0x00600018 (0xffff8efef018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9361d000. Read at address 0x00600018 (0xffff9361d018): 0x00000000 Write at address 0x00600018 (0xffff9361d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb797f000. Read at address 0x00600018 (0xffffb797f018): 0x00000000 Write at address 0x00600018 (0xffffb797f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff811cd000. Read at address 0x00600018 (0xffff811cd018): 0x00000000 Write at address 0x00600018 (0xffff811cd018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3e14000. Read at address 0x00600018 (0xffffa3e14018): 0x00000000 Write at address 0x00600018 (0xffffa3e14018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8cd91000. Read at address 0x00600018 (0xffff8cd91018): 0x00000000 Write at address 0x00600018 (0xffff8cd91018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3043000. Read at address 0x00600018 (0xffffb3043018): 0x00000000 Write at address 0x00600018 (0xffffb3043018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89f68000. Read at address 0x00600018 (0xffff89f68018): 0x00000000 Write at address 0x00600018 (0xffff89f68018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8394b000. Read at address 0x00600018 (0xffff8394b018): 0x00000000 Write at address 0x00600018 (0xffff8394b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4877000. Read at address 0x00600018 (0xffffb4877018): 0x00000000 Write at address 0x00600018 (0xffffb4877018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91e83000. Read at address 0x00600018 (0xffff91e83018): 0x00000000 Write at address 0x00600018 (0xffff91e83018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb007b000. Read at address 0x00600018 (0xffffb007b018): 0x00000000 Write at address 0x00600018 (0xffffb007b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91401000. Read at address 0x00600018 (0xffff91401018): 0x00000000 Write at address 0x00600018 (0xffff91401018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb91de000. Read at address 0x00600018 (0xffffb91de018): 0x00000000 Write at address 0x00600018 (0xffffb91de018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbbbc0000. Read at address 0x00600018 (0xffffbbbc0018): 0x00000000 Write at address 0x00600018 (0xffffbbbc0018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 237 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc911000. Read at address 0x00600018 (0xffffbc911018): 0x00000000 Write at address 0x00600018 (0xffffbc911018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbfce000. Read at address 0x00600018 (0xffffbbfce018): 0x00000000 Write at address 0x00600018 (0xffffbbfce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a118000. Read at address 0x00600018 (0xffff9a118018): 0x00000000 Write at address 0x00600018 (0xffff9a118018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbba54000. Read at address 0x00600018 (0xffffbba54018): 0x00000000 Write at address 0x00600018 (0xffffbba54018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbe52d000. Read at address 0x00600018 (0xffffbe52d018): 0x00000000 Write at address 0x00600018 (0xffffbe52d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb809000. Read at address 0x00600018 (0xffffbb809018): 0x00000000 Write at address 0x00600018 (0xffffbb809018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadd5d000. Read at address 0x00600018 (0xffffadd5d018): 0x00000000 Write at address 0x00600018 (0xffffadd5d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2e42000. Read at address 0x00600018 (0xffffa2e42018): 0x00000000 Write at address 0x00600018 (0xffffa2e42018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9dfa3000. Read at address 0x00600018 (0xffff9dfa3018): 0x00000000 Write at address 0x00600018 (0xffff9dfa3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb167d000. Read at address 0x00600018 (0xffffb167d018): 0x00000000 Write at address 0x00600018 (0xffffb167d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb8ec9000. Read at address 0x00600018 (0xffffb8ec9018): 0x00000000 Write at address 0x00600018 (0xffffb8ec9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff86185000. Read at address 0x00600018 (0xffff86185018): 0x00000000 Write at address 0x00600018 (0xffff86185018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb4aaa000. Read at address 0x00600018 (0xffffb4aaa018): 0x00000000 Write at address 0x00600018 (0xffffb4aaa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa6728000. Read at address 0x00600018 (0xffffa6728018): 0x00000000 Write at address 0x00600018 (0xffffa6728018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff96258000. Read at address 0x00600018 (0xffff96258018): 0x00000000 Write at address 0x00600018 (0xffff96258018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86e6a000. Read at address 0x00600018 (0xffff86e6a018): 0x00000000 Write at address 0x00600018 (0xffff86e6a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8187c000. Read at address 0x00600018 (0xffff8187c018): 0x00000000 Write at address 0x00600018 (0xffff8187c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba940000. Read at address 0x00600018 (0xffffba940018): 0x00000000 Write at address 0x00600018 (0xffffba940018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7e3f000. Read at address 0x00600018 (0xffffa7e3f018): 0x00000000 Write at address 0x00600018 (0xffffa7e3f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e969000. Read at address 0x00600018 (0xffff9e969018): 0x00000000 Write at address 0x00600018 (0xffff9e969018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91ef8000. Read at address 0x00600018 (0xffff91ef8018): 0x00000000 Write at address 0x00600018 (0xffff91ef8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff820f6000. Read at address 0x00600018 (0xffff820f6018): 0x00000000 Write at address 0x00600018 (0xffff820f6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84a09000. Read at address 0x00600018 (0xffff84a09018): 0x00000000 Write at address 0x00600018 (0xffff84a09018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8e536000. Read at address 0x00600018 (0xffff8e536018): 0x00000000 Write at address 0x00600018 (0xffff8e536018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3f2e000. Read at address 0x00600018 (0xffffa3f2e018): 0x00000000 Write at address 0x00600018 (0xffffa3f2e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8c706000. Read at address 0x00600018 (0xffff8c706018): 0x00000000 Write at address 0x00600018 (0xffff8c706018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa62f000. Read at address 0x00600018 (0xffffaa62f018): 0x00000000 Write at address 0x00600018 (0xffffaa62f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b6bd000. Read at address 0x00600018 (0xffff9b6bd018): 0x00000000 Write at address 0x00600018 (0xffff9b6bd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5aac000. Read at address 0x00600018 (0xffffb5aac018): 0x00000000 Write at address 0x00600018 (0xffffb5aac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba122000. Read at address 0x00600018 (0xffffba122018): 0x00000000 Write at address 0x00600018 (0xffffba122018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8953a000. Read at address 0x00600018 (0xffff8953a018): 0x00000000 Write at address 0x00600018 (0xffff8953a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e7ef000. Read at address 0x00600018 (0xffff8e7ef018): 0x00000000 Write at address 0x00600018 (0xffff8e7ef018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff81838000. Read at address 0x00600018 (0xffff81838018): 0x00000000 Write at address 0x00600018 (0xffff81838018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb970c000. Read at address 0x00600018 (0xffffb970c018): 0x00000000 Write at address 0x00600018 (0xffffb970c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab834000. Read at address 0x00600018 (0xffffab834018): 0x00000000 Write at address 0x00600018 (0xffffab834018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94845000. Read at address 0x00600018 (0xffff94845018): 0x00000000 Write at address 0x00600018 (0xffff94845018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ff1d000. Read at address 0x00600018 (0xffff8ff1d018): 0x00000000 Write at address 0x00600018 (0xffff8ff1d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaadd7000. Read at address 0x00600018 (0xffffaadd7018): 0x00000000 Write at address 0x00600018 (0xffffaadd7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad432000. Read at address 0x00600018 (0xffffad432018): 0x00000000 Write at address 0x00600018 (0xffffad432018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88938000. Read at address 0x00600018 (0xffff88938018): 0x00000000 Write at address 0x00600018 (0xffff88938018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbdece000. Read at address 0x00600018 (0xffffbdece018): 0x00000000 Write at address 0x00600018 (0xffffbdece018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff909dd000. Read at address 0x00600018 (0xffff909dd018): 0x00000000 Write at address 0x00600018 (0xffff909dd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff887a4000. Read at address 0x00600018 (0xffff887a4018): 0x00000000 Write at address 0x00600018 (0xffff887a4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb67e2000. Read at address 0x00600018 (0xffffb67e2018): 0x00000000 Write at address 0x00600018 (0xffffb67e2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb311d000. Read at address 0x00600018 (0xffffb311d018): 0x00000000 Write at address 0x00600018 (0xffffb311d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb37cf000. Read at address 0x00600018 (0xffffb37cf018): 0x00000000 Write at address 0x00600018 (0xffffb37cf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb0f13000. Read at address 0x00600018 (0xffffb0f13018): 0x00000000 Write at address 0x00600018 (0xffffb0f13018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82acd000. Read at address 0x00600018 (0xffff82acd018): 0x00000000 Write at address 0x00600018 (0xffff82acd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaf56e000. Read at address 0x00600018 (0xffffaf56e018): 0x00000000 Write at address 0x00600018 (0xffffaf56e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3fb0000. Read at address 0x00600018 (0xffffb3fb0018): 0x00000000 Write at address 0x00600018 (0xffffb3fb0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa710f000. Read at address 0x00600018 (0xffffa710f018): 0x00000000 Write at address 0x00600018 (0xffffa710f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9461d000. Read at address 0x00600018 (0xffff9461d018): 0x00000000 Write at address 0x00600018 (0xffff9461d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9a7a1000. Read at address 0x00600018 (0xffff9a7a1018): 0x00000000 Write at address 0x00600018 (0xffff9a7a1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b61c000. Read at address 0x00600018 (0xffff8b61c018): 0x00000000 Write at address 0x00600018 (0xffff8b61c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d853000. Read at address 0x00600018 (0xffff9d853018): 0x00000000 Write at address 0x00600018 (0xffff9d853018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94a56000. Read at address 0x00600018 (0xffff94a56018): 0x00000000 Write at address 0x00600018 (0xffff94a56018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93269000. Read at address 0x00600018 (0xffff93269018): 0x00000000 Write at address 0x00600018 (0xffff93269018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff88695000. Read at address 0x00600018 (0xffff88695018): 0x00000000 Write at address 0x00600018 (0xffff88695018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8e431000. Read at address 0x00600018 (0xffff8e431018): 0x00000000 Write at address 0x00600018 (0xffff8e431018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf876000. Read at address 0x00600018 (0xffffaf876018): 0x00000000 Write at address 0x00600018 (0xffffaf876018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7a60000. Read at address 0x00600018 (0xffffa7a60018): 0x00000000 Write at address 0x00600018 (0xffffa7a60018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb2d6c000. Read at address 0x00600018 (0xffffb2d6c018): 0x00000000 Write at address 0x00600018 (0xffffb2d6c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbb426000. Read at address 0x00600018 (0xffffbb426018): 0x00000000 Write at address 0x00600018 (0xffffbb426018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafa8b000. Read at address 0x00600018 (0xffffafa8b018): 0x00000000 Write at address 0x00600018 (0xffffafa8b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb03fa000. Read at address 0x00600018 (0xffffb03fa018): 0x00000000 Write at address 0x00600018 (0xffffb03fa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90fd5000. Read at address 0x00600018 (0xffff90fd5018): 0x00000000 Write at address 0x00600018 (0xffff90fd5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9566c000. Read at address 0x00600018 (0xffff9566c018): 0x00000000 Write at address 0x00600018 (0xffff9566c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb61f3000. Read at address 0x00600018 (0xffffb61f3018): 0x00000000 Write at address 0x00600018 (0xffffb61f3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb770a000. Read at address 0x00600018 (0xffffb770a018): 0x00000000 Write at address 0x00600018 (0xffffb770a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbe2a000. Read at address 0x00600018 (0xffffbbe2a018): 0x00000000 Write at address 0x00600018 (0xffffbbe2a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbb58d000. Read at address 0x00600018 (0xffffbb58d018): 0x00000000 Write at address 0x00600018 (0xffffbb58d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf559000. Read at address 0x00600018 (0xffffaf559018): 0x00000000 Write at address 0x00600018 (0xffffaf559018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2da3000. Read at address 0x00600018 (0xffffb2da3018): 0x00000000 Write at address 0x00600018 (0xffffb2da3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff89514000. Read at address 0x00600018 (0xffff89514018): 0x00000000 Write at address 0x00600018 (0xffff89514018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb600e000. Read at address 0x00600018 (0xffffb600e018): 0x00000000 Write at address 0x00600018 (0xffffb600e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2f27000. Read at address 0x00600018 (0xffffb2f27018): 0x00000000 Write at address 0x00600018 (0xffffb2f27018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa94e0000. Read at address 0x00600018 (0xffffa94e0018): 0x00000000 Write at address 0x00600018 (0xffffa94e0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6cba000. Read at address 0x00600018 (0xffffa6cba018): 0x00000000 Write at address 0x00600018 (0xffffa6cba018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff979be000. Read at address 0x00600018 (0xffff979be018): 0x00000000 Write at address 0x00600018 (0xffff979be018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa12a000. Read at address 0x00600018 (0xffffaa12a018): 0x00000000 Write at address 0x00600018 (0xffffaa12a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92c9f000. Read at address 0x00600018 (0xffff92c9f018): 0x00000000 Write at address 0x00600018 (0xffff92c9f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8f783000. Read at address 0x00600018 (0xffff8f783018): 0x00000000 Write at address 0x00600018 (0xffff8f783018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff952cb000. Read at address 0x00600018 (0xffff952cb018): 0x00000000 Write at address 0x00600018 (0xffff952cb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97bf1000. Read at address 0x00600018 (0xffff97bf1018): 0x00000000 Write at address 0x00600018 (0xffff97bf1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffab761000. Read at address 0x00600018 (0xffffab761018): 0x00000000 Write at address 0x00600018 (0xffffab761018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff824e0000. Read at address 0x00600018 (0xffff824e0018): 0x00000000 Write at address 0x00600018 (0xffff824e0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98fcb000. Read at address 0x00600018 (0xffff98fcb018): 0x00000000 Write at address 0x00600018 (0xffff98fcb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9defb000. Read at address 0x00600018 (0xffff9defb018): 0x00000000 Write at address 0x00600018 (0xffff9defb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9478d000. Read at address 0x00600018 (0xffff9478d018): 0x00000000 Write at address 0x00600018 (0xffff9478d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88443000. Read at address 0x00600018 (0xffff88443018): 0x00000000 Write at address 0x00600018 (0xffff88443018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff95afc000. Read at address 0x00600018 (0xffff95afc018): 0x00000000 Write at address 0x00600018 (0xffff95afc018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffad23b000. Read at address 0x00600018 (0xffffad23b018): 0x00000000 Write at address 0x00600018 (0xffffad23b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99b82000. Read at address 0x00600018 (0xffff99b82018): 0x00000000 Write at address 0x00600018 (0xffff99b82018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffabb45000. Read at address 0x00600018 (0xffffabb45018): 0x00000000 Write at address 0x00600018 (0xffffabb45018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8df19000. Read at address 0x00600018 (0xffff8df19018): 0x00000000 Write at address 0x00600018 (0xffff8df19018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb52bf000. Read at address 0x00600018 (0xffffb52bf018): 0x00000000 Write at address 0x00600018 (0xffffb52bf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff89803000. Read at address 0x00600018 (0xffff89803018): 0x00000000 Write at address 0x00600018 (0xffff89803018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff93ce7000. Read at address 0x00600018 (0xffff93ce7018): 0x00000000 Write at address 0x00600018 (0xffff93ce7018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84782000. Read at address 0x00600018 (0xffff84782018): 0x00000000 Write at address 0x00600018 (0xffff84782018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa450a000. Read at address 0x00600018 (0xffffa450a018): 0x00000000 Write at address 0x00600018 (0xffffa450a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf361000. Read at address 0x00600018 (0xffffaf361018): 0x00000000 Write at address 0x00600018 (0xffffaf361018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2e29000. Read at address 0x00600018 (0xffffa2e29018): 0x00000000 Write at address 0x00600018 (0xffffa2e29018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba7d8000. Read at address 0x00600018 (0xffffba7d8018): 0x00000000 Write at address 0x00600018 (0xffffba7d8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb67d7000. Read at address 0x00600018 (0xffffb67d7018): 0x00000000 Write at address 0x00600018 (0xffffb67d7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0897000. Read at address 0x00600018 (0xffffa0897018): 0x00000000 Write at address 0x00600018 (0xffffa0897018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c4f6000. Read at address 0x00600018 (0xffff8c4f6018): 0x00000000 Write at address 0x00600018 (0xffff8c4f6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff88566000. Read at address 0x00600018 (0xffff88566018): 0x00000000 Write at address 0x00600018 (0xffff88566018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c26a000. Read at address 0x00600018 (0xffff9c26a018): 0x00000000 Write at address 0x00600018 (0xffff9c26a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94486000. Read at address 0x00600018 (0xffff94486018): 0x00000000 Write at address 0x00600018 (0xffff94486018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff83bf8000. Read at address 0x00600018 (0xffff83bf8018): 0x00000000 Write at address 0x00600018 (0xffff83bf8018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe9d5000. Read at address 0x00600018 (0xffffbe9d5018): 0x00000000 Write at address 0x00600018 (0xffffbe9d5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8e10000. Read at address 0x00600018 (0xffffa8e10018): 0x00000000 Write at address 0x00600018 (0xffffa8e10018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8210e000. Read at address 0x00600018 (0xffff8210e018): 0x00000000 Write at address 0x00600018 (0xffff8210e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e5f2000. Read at address 0x00600018 (0xffff9e5f2018): 0x00000000 Write at address 0x00600018 (0xffff9e5f2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9c34c000. Read at address 0x00600018 (0xffff9c34c018): 0x00000000 Write at address 0x00600018 (0xffff9c34c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1b8d000. Read at address 0x00600018 (0xffffa1b8d018): 0x00000000 Write at address 0x00600018 (0xffffa1b8d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4dc7000. Read at address 0x00600018 (0xffffa4dc7018): 0x00000000 Write at address 0x00600018 (0xffffa4dc7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa70c3000. Read at address 0x00600018 (0xffffa70c3018): 0x00000000 Write at address 0x00600018 (0xffffa70c3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e390000. Read at address 0x00600018 (0xffff8e390018): 0x00000000 Write at address 0x00600018 (0xffff8e390018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85efc000. Read at address 0x00600018 (0xffff85efc018): 0x00000000 Write at address 0x00600018 (0xffff85efc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbe8b2000. Read at address 0x00600018 (0xffffbe8b2018): 0x00000000 Write at address 0x00600018 (0xffffbe8b2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2806000. Read at address 0x00600018 (0xffffb2806018): 0x00000000 Write at address 0x00600018 (0xffffb2806018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa1a50000. Read at address 0x00600018 (0xffffa1a50018): 0x00000000 Write at address 0x00600018 (0xffffa1a50018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8dd9a000. Read at address 0x00600018 (0xffff8dd9a018): 0x00000000 Write at address 0x00600018 (0xffff8dd9a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3db0000. Read at address 0x00600018 (0xffffa3db0018): 0x00000000 Write at address 0x00600018 (0xffffa3db0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c609000. Read at address 0x00600018 (0xffff8c609018): 0x00000000 Write at address 0x00600018 (0xffff8c609018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbb35c000. Read at address 0x00600018 (0xffffbb35c018): 0x00000000 Write at address 0x00600018 (0xffffbb35c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb2ee2000. Read at address 0x00600018 (0xffffb2ee2018): 0x00000000 Write at address 0x00600018 (0xffffb2ee2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9eeb2000. Read at address 0x00600018 (0xffff9eeb2018): 0x00000000 Write at address 0x00600018 (0xffff9eeb2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83129000. Read at address 0x00600018 (0xffff83129018): 0x00000000 Write at address 0x00600018 (0xffff83129018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93e3b000. Read at address 0x00600018 (0xffff93e3b018): 0x00000000 Write at address 0x00600018 (0xffff93e3b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa2be5000. Read at address 0x00600018 (0xffffa2be5018): 0x00000000 Write at address 0x00600018 (0xffffa2be5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffad683000. Read at address 0x00600018 (0xffffad683018): 0x00000000 Write at address 0x00600018 (0xffffad683018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5fcf000. Read at address 0x00600018 (0xffffb5fcf018): 0x00000000 Write at address 0x00600018 (0xffffb5fcf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b907000. Read at address 0x00600018 (0xffff8b907018): 0x00000000 Write at address 0x00600018 (0xffff8b907018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5a8c000. Read at address 0x00600018 (0xffffa5a8c018): 0x00000000 Write at address 0x00600018 (0xffffa5a8c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82336000. Read at address 0x00600018 (0xffff82336018): 0x00000000 Write at address 0x00600018 (0xffff82336018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff91699000. Read at address 0x00600018 (0xffff91699018): 0x00000000 Write at address 0x00600018 (0xffff91699018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c6ae000. Read at address 0x00600018 (0xffff8c6ae018): 0x00000000 Write at address 0x00600018 (0xffff8c6ae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8a11a000. Read at address 0x00600018 (0xffff8a11a018): 0x00000000 Write at address 0x00600018 (0xffff8a11a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb05bf000. Read at address 0x00600018 (0xffffb05bf018): 0x00000000 Write at address 0x00600018 (0xffffb05bf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9ee61000. Read at address 0x00600018 (0xffff9ee61018): 0x00000000 Write at address 0x00600018 (0xffff9ee61018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8852a000. Read at address 0x00600018 (0xffff8852a018): 0x00000000 Write at address 0x00600018 (0xffff8852a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff844b4000. Read at address 0x00600018 (0xffff844b4018): 0x00000000 Write at address 0x00600018 (0xffff844b4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff87494000. Read at address 0x00600018 (0xffff87494018): 0x00000000 Write at address 0x00600018 (0xffff87494018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 /dev/mem opened. Memory mapped at address 0xffffba2e4000. Read at address 0x00600018 (0xffffba2e4018): 0x00000000 Write at address 0x00600018 (0xffffba2e4018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8be76000. Read at address 0x00600018 (0xffff8be76018): 0x00000000 Write at address 0x00600018 (0xffff8be76018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaeb9a000. Read at address 0x00600018 (0xffffaeb9a018): 0x00000000 Write at address 0x00600018 (0xffffaeb9a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94de6000. Read at address 0x00600018 (0xffff94de6018): 0x00000000 Write at address 0x00600018 (0xffff94de6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff90895000. Read at address 0x00600018 (0xffff90895018): 0x00000000 Write at address 0x00600018 (0xffff90895018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9932c000. Read at address 0x00600018 (0xffff9932c018): 0x00000000 Write at address 0x00600018 (0xffff9932c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0651000. Read at address 0x00600018 (0xffffa0651018): 0x00000000 Write at address 0x00600018 (0xffffa0651018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b708000. Read at address 0x00600018 (0xffff8b708018): 0x00000000 Write at address 0x00600018 (0xffff8b708018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9deea000. Read at address 0x00600018 (0xffff9deea018): 0x00000000 Write at address 0x00600018 (0xffff9deea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5d7f000. Read at address 0x00600018 (0xffffa5d7f018): 0x00000000 Write at address 0x00600018 (0xffffa5d7f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0ee5000. Read at address 0x00600018 (0xffffb0ee5018): 0x00000000 Write at address 0x00600018 (0xffffb0ee5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa0dd7000. Read at address 0x00600018 (0xffffa0dd7018): 0x00000000 Write at address 0x00600018 (0xffffa0dd7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb655a000. Read at address 0x00600018 (0xffffb655a018): 0x00000000 Write at address 0x00600018 (0xffffb655a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9011000. Read at address 0x00600018 (0xffffa9011018): 0x00000000 Write at address 0x00600018 (0xffffa9011018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb0307000. Read at address 0x00600018 (0xffffb0307018): 0x00000000 Write at address 0x00600018 (0xffffb0307018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8b221000. Read at address 0x00600018 (0xffff8b221018): 0x00000000 Write at address 0x00600018 (0xffff8b221018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff851f8000. Read at address 0x00600018 (0xffff851f8018): 0x00000000 Write at address 0x00600018 (0xffff851f8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd31c000. Read at address 0x00600018 (0xffffbd31c018): 0x00000000 Write at address 0x00600018 (0xffffbd31c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84086000. Read at address 0x00600018 (0xffff84086018): 0x00000000 Write at address 0x00600018 (0xffff84086018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa956a000. Read at address 0x00600018 (0xffffa956a018): 0x00000000 Write at address 0x00600018 (0xffffa956a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff904d6000. Read at address 0x00600018 (0xffff904d6018): 0x00000000 Write at address 0x00600018 (0xffff904d6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbcfe8000. Read at address 0x00600018 (0xffffbcfe8018): 0x00000000 Write at address 0x00600018 (0xffffbcfe8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85bb2000. Read at address 0x00600018 (0xffff85bb2018): 0x00000000 Write at address 0x00600018 (0xffff85bb2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb3cfe000. Read at address 0x00600018 (0xffffb3cfe018): 0x00000000 Write at address 0x00600018 (0xffffb3cfe018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb59b6000. Read at address 0x00600018 (0xffffb59b6018): 0x00000000 Write at address 0x00600018 (0xffffb59b6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8b714000. Read at address 0x00600018 (0xffff8b714018): 0x00000000 Write at address 0x00600018 (0xffff8b714018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fcc2000. Read at address 0x00600018 (0xffff8fcc2018): 0x00000000 Write at address 0x00600018 (0xffff8fcc2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9a0e9000. Read at address 0x00600018 (0xffff9a0e9018): 0x00000000 Write at address 0x00600018 (0xffff9a0e9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff93f4f000. Read at address 0x00600018 (0xffff93f4f018): 0x00000000 Write at address 0x00600018 (0xffff93f4f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff92c24000. Read at address 0x00600018 (0xffff92c24018): 0x00000000 Write at address 0x00600018 (0xffff92c24018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f700000. Read at address 0x00600018 (0xffff9f700018): 0x00000000 Write at address 0x00600018 (0xffff9f700018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff955ec000. Read at address 0x00600018 (0xffff955ec018): 0x00000000 Write at address 0x00600018 (0xffff955ec018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91b77000. Read at address 0x00600018 (0xffff91b77018): 0x00000000 Write at address 0x00600018 (0xffff91b77018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9336e000. Read at address 0x00600018 (0xffff9336e018): 0x00000000 Write at address 0x00600018 (0xffff9336e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87b1a000. Read at address 0x00600018 (0xffff87b1a018): 0x00000000 Write at address 0x00600018 (0xffff87b1a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffac102000. Read at address 0x00600018 (0xffffac102018): 0x00000000 Write at address 0x00600018 (0xffffac102018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cee2000. Read at address 0x00600018 (0xffff9cee2018): 0x00000000 Write at address 0x00600018 (0xffff9cee2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93815000. Read at address 0x00600018 (0xffff93815018): 0x00000000 Write at address 0x00600018 (0xffff93815018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7f67000. Read at address 0x00600018 (0xffffa7f67018): 0x00000000 Write at address 0x00600018 (0xffffa7f67018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff95cc6000. Read at address 0x00600018 (0xffff95cc6018): 0x00000000 Write at address 0x00600018 (0xffff95cc6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98c99000. Read at address 0x00600018 (0xffff98c99018): 0x00000000 Write at address 0x00600018 (0xffff98c99018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaef62000. Read at address 0x00600018 (0xffffaef62018): 0x00000000 Write at address 0x00600018 (0xffffaef62018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d57e000. Read at address 0x00600018 (0xffff8d57e018): 0x00000000 Write at address 0x00600018 (0xffff8d57e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff906b6000. Read at address 0x00600018 (0xffff906b6018): 0x00000000 Write at address 0x00600018 (0xffff906b6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e6ab000. Read at address 0x00600018 (0xffff9e6ab018): 0x00000000 Write at address 0x00600018 (0xffff9e6ab018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi2:animations is mounted. ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a1c7000. Read at address 0x00600018 (0xffff8a1c7018): 0x00000000 Write at address 0x00600018 (0xffff8a1c7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 220 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba804000. Read at address 0x00600018 (0xffffba804018): 0x00000000 Write at address 0x00600018 (0xffffba804018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc988000. Read at address 0x00600018 (0xffffbc988018): 0x00000000 Write at address 0x00600018 (0xffffbc988018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83b06000. Read at address 0x00600018 (0xffff83b06018): 0x00000000 Write at address 0x00600018 (0xffff83b06018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ca2e000. Read at address 0x00600018 (0xffff8ca2e018): 0x00000000 Write at address 0x00600018 (0xffff8ca2e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9995a000. Read at address 0x00600018 (0xffff9995a018): 0x00000000 Write at address 0x00600018 (0xffff9995a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6622000. Read at address 0x00600018 (0xffffb6622018): 0x00000000 Write at address 0x00600018 (0xffffb6622018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa247e000. Read at address 0x00600018 (0xffffa247e018): 0x00000000 Write at address 0x00600018 (0xffffa247e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff801d7000. Read at address 0x00600018 (0xffff801d7018): 0x00000000 Write at address 0x00600018 (0xffff801d7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff996ce000. Read at address 0x00600018 (0xffff996ce018): 0x00000000 Write at address 0x00600018 (0xffff996ce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5ae3000. Read at address 0x00600018 (0xffffb5ae3018): 0x00000000 Write at address 0x00600018 (0xffffb5ae3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa6936000. Read at address 0x00600018 (0xffffa6936018): 0x00000000 Write at address 0x00600018 (0xffffa6936018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7d82000. Read at address 0x00600018 (0xffffb7d82018): 0x00000000 Write at address 0x00600018 (0xffffb7d82018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff84fa7000. Read at address 0x00600018 (0xffff84fa7018): 0x00000000 Write at address 0x00600018 (0xffff84fa7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff951a8000. Read at address 0x00600018 (0xffff951a8018): 0x00000000 Write at address 0x00600018 (0xffff951a8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb8673000. Read at address 0x00600018 (0xffffb8673018): 0x00000000 Write at address 0x00600018 (0xffffb8673018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff89ce9000. Read at address 0x00600018 (0xffff89ce9018): 0x00000000 Write at address 0x00600018 (0xffff89ce9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb162b000. Read at address 0x00600018 (0xffffb162b018): 0x00000000 Write at address 0x00600018 (0xffffb162b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff870bf000. Read at address 0x00600018 (0xffff870bf018): 0x00000000 Write at address 0x00600018 (0xffff870bf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82dc7000. Read at address 0x00600018 (0xffff82dc7018): 0x00000000 Write at address 0x00600018 (0xffff82dc7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9568a000. Read at address 0x00600018 (0xffff9568a018): 0x00000000 Write at address 0x00600018 (0xffff9568a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8bc29000. Read at address 0x00600018 (0xffff8bc29018): 0x00000000 Write at address 0x00600018 (0xffff8bc29018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8eab8000. Read at address 0x00600018 (0xffff8eab8018): 0x00000000 Write at address 0x00600018 (0xffff8eab8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb22f0000. Read at address 0x00600018 (0xffffb22f0018): 0x00000000 Write at address 0x00600018 (0xffffb22f0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81b2b000. Read at address 0x00600018 (0xffff81b2b018): 0x00000000 Write at address 0x00600018 (0xffff81b2b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa31c1000. Read at address 0x00600018 (0xffffa31c1018): 0x00000000 Write at address 0x00600018 (0xffffa31c1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf677000. Read at address 0x00600018 (0xffffbf677018): 0x00000000 Write at address 0x00600018 (0xffffbf677018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa32be000. Read at address 0x00600018 (0xffffa32be018): 0x00000000 Write at address 0x00600018 (0xffffa32be018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8ad9000. Read at address 0x00600018 (0xffffa8ad9018): 0x00000000 Write at address 0x00600018 (0xffffa8ad9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9f8ea000. Read at address 0x00600018 (0xffff9f8ea018): 0x00000000 Write at address 0x00600018 (0xffff9f8ea018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff88065000. Read at address 0x00600018 (0xffff88065018): 0x00000000 Write at address 0x00600018 (0xffff88065018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5b77000. Read at address 0x00600018 (0xffffa5b77018): 0x00000000 Write at address 0x00600018 (0xffffa5b77018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9fddd000. Read at address 0x00600018 (0xffff9fddd018): 0x00000000 Write at address 0x00600018 (0xffff9fddd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff937de000. Read at address 0x00600018 (0xffff937de018): 0x00000000 Write at address 0x00600018 (0xffff937de018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b193000. Read at address 0x00600018 (0xffff8b193018): 0x00000000 Write at address 0x00600018 (0xffff8b193018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8f3e000. Read at address 0x00600018 (0xffffb8f3e018): 0x00000000 Write at address 0x00600018 (0xffffb8f3e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa938b000. Read at address 0x00600018 (0xffffa938b018): 0x00000000 Write at address 0x00600018 (0xffffa938b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 ubi1:textures is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbceb7000. Read at address 0x00600018 (0xffffbceb7018): 0x00000000 Write at address 0x00600018 (0xffffbceb7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff997cd000. Read at address 0x00600018 (0xffff997cd018): 0x00000000 Write at address 0x00600018 (0xffff997cd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0a21000. Read at address 0x00600018 (0xffffb0a21018): 0x00000000 Write at address 0x00600018 (0xffffb0a21018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaa773000. Read at address 0x00600018 (0xffffaa773018): 0x00000000 Write at address 0x00600018 (0xffffaa773018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen net.ipv6.conf.all.disable_ipv6 = 0 stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80f5c000. Read at address 0x00600018 (0xffff80f5c018): 0x00000000 Write at address 0x00600018 (0xffff80f5c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi2:textures is mounted. ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87fb7000. Read at address 0x00600018 (0xffff87fb7018): 0x00000000 Write at address 0x00600018 (0xffff87fb7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff86e7f000. Read at address 0x00600018 (0xffff86e7f018): 0x00000000 Write at address 0x00600018 (0xffff86e7f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb0da3000. Read at address 0x00600018 (0xffffb0da3018): 0x00000000 Write at address 0x00600018 (0xffffb0da3018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa620a000. Read at address 0x00600018 (0xffffa620a018): 0x00000000 Write at address 0x00600018 (0xffffa620a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb57e6000. Read at address 0x00600018 (0xffffb57e6018): 0x00000000 Write at address 0x00600018 (0xffffb57e6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a0a4000. Read at address 0x00600018 (0xffff8a0a4018): 0x00000000 Write at address 0x00600018 (0xffff8a0a4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e947000. Read at address 0x00600018 (0xffff8e947018): 0x00000000 Write at address 0x00600018 (0xffff8e947018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa6631000. Read at address 0x00600018 (0xffffa6631018): 0x00000000 Write at address 0x00600018 (0xffffa6631018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaf91d000. Read at address 0x00600018 (0xffffaf91d018): 0x00000000 Write at address 0x00600018 (0xffffaf91d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae864000. Read at address 0x00600018 (0xffffae864018): 0x00000000 Write at address 0x00600018 (0xffffae864018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff96ae6000. Read at address 0x00600018 (0xffff96ae6018): 0x00000000 Write at address 0x00600018 (0xffff96ae6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa729f000. Read at address 0x00600018 (0xffffa729f018): 0x00000000 Write at address 0x00600018 (0xffffa729f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba5d0000. Read at address 0x00600018 (0xffffba5d0018): 0x00000000 Write at address 0x00600018 (0xffffba5d0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 220 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa7cd7000. Read at address 0x00600018 (0xffffa7cd7018): 0x00000000 Write at address 0x00600018 (0xffffa7cd7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9d608000. Read at address 0x00600018 (0xffff9d608018): 0x00000000 Write at address 0x00600018 (0xffff9d608018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8943b000. Read at address 0x00600018 (0xffff8943b018): 0x00000000 Write at address 0x00600018 (0xffff8943b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaae40000. Read at address 0x00600018 (0xffffaae40018): 0x00000000 Write at address 0x00600018 (0xffffaae40018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9d647000. Read at address 0x00600018 (0xffff9d647018): 0x00000000 Write at address 0x00600018 (0xffff9d647018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbd90a000. Read at address 0x00600018 (0xffffbd90a018): 0x00000000 Write at address 0x00600018 (0xffffbd90a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadda8000. Read at address 0x00600018 (0xffffadda8018): 0x00000000 Write at address 0x00600018 (0xffffadda8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbdd4e000. Read at address 0x00600018 (0xffffbdd4e018): 0x00000000 Write at address 0x00600018 (0xffffbdd4e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 net.ipv6.conf.eth0.dad_transmits = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb77b8000. Read at address 0x00600018 (0xffffb77b8018): 0x00000000 Write at address 0x00600018 (0xffffb77b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb74c1000. Read at address 0x00600018 (0xffffb74c1018): 0x00000000 Write at address 0x00600018 (0xffffb74c1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86c73000. Read at address 0x00600018 (0xffff86c73018): 0x00000000 Write at address 0x00600018 (0xffff86c73018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84757000. Read at address 0x00600018 (0xffff84757018): 0x00000000 Write at address 0x00600018 (0xffff84757018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9cde5000. Read at address 0x00600018 (0xffff9cde5018): 0x00000000 Write at address 0x00600018 (0xffff9cde5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb3625000. Read at address 0x00600018 (0xffffb3625018): 0x00000000 Write at address 0x00600018 (0xffffb3625018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85aa9000. Read at address 0x00600018 (0xffff85aa9018): 0x00000000 Write at address 0x00600018 (0xffff85aa9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen net.ipv6.neigh.eth0/2.retrans_time_ms = 0 stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaa798000. Read at address 0x00600018 (0xffffaa798018): 0x00000000 Write at address 0x00600018 (0xffffaa798018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff927a2000. Read at address 0x00600018 (0xffff927a2018): 0x00000000 Write at address 0x00600018 (0xffff927a2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4195000. Read at address 0x00600018 (0xffffb4195018): 0x00000000 Write at address 0x00600018 (0xffffb4195018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff908f6000. Read at address 0x00600018 (0xffff908f6018): 0x00000000 Write at address 0x00600018 (0xffff908f6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa38b8000. Read at address 0x00600018 (0xffffa38b8018): 0x00000000 Write at address 0x00600018 (0xffffa38b8018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf43f000. Read at address 0x00600018 (0xffffaf43f018): 0x00000000 Write at address 0x00600018 (0xffffaf43f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae9cb000. Read at address 0x00600018 (0xffffae9cb018): 0x00000000 Write at address 0x00600018 (0xffffae9cb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9e91b000. Read at address 0x00600018 (0xffff9e91b018): 0x00000000 Write at address 0x00600018 (0xffff9e91b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff806e1000. Read at address 0x00600018 (0xffff806e1018): 0x00000000 Write at address 0x00600018 (0xffff806e1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbdbf000. Read at address 0x00600018 (0xffffbbdbf018): 0x00000000 Write at address 0x00600018 (0xffffbbdbf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ceba000. Read at address 0x00600018 (0xffff8ceba018): 0x00000000 Write at address 0x00600018 (0xffff8ceba018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabc4a000. Read at address 0x00600018 (0xffffabc4a018): 0x00000000 Write at address 0x00600018 (0xffffabc4a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa8fa3000. Read at address 0x00600018 (0xffffa8fa3018): 0x00000000 Write at address 0x00600018 (0xffffa8fa3018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff92b6f000. Read at address 0x00600018 (0xffff92b6f018): 0x00000000 Write at address 0x00600018 (0xffff92b6f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91fb0000. Read at address 0x00600018 (0xffff91fb0018): 0x00000000 Write at address 0x00600018 (0xffff91fb0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88a18000. Read at address 0x00600018 (0xffff88a18018): 0x00000000 Write at address 0x00600018 (0xffff88a18018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85f29000. Read at address 0x00600018 (0xffff85f29018): 0x00000000 Write at address 0x00600018 (0xffff85f29018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83568000. Read at address 0x00600018 (0xffff83568018): 0x00000000 Write at address 0x00600018 (0xffff83568018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff87b19000. Read at address 0x00600018 (0xffff87b19018): 0x00000000 Write at address 0x00600018 (0xffff87b19018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabc4e000. Read at address 0x00600018 (0xffffabc4e018): 0x00000000 Write at address 0x00600018 (0xffffabc4e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95ebb000. Read at address 0x00600018 (0xffff95ebb018): 0x00000000 Write at address 0x00600018 (0xffff95ebb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe61b000. Read at address 0x00600018 (0xffffbe61b018): 0x00000000 Write at address 0x00600018 (0xffffbe61b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff866c8000. Read at address 0x00600018 (0xffff866c8018): 0x00000000 Write at address 0x00600018 (0xffff866c8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffade6b000. Read at address 0x00600018 (0xffffade6b018): 0x00000000 Write at address 0x00600018 (0xffffade6b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3ab6000. Read at address 0x00600018 (0xffffb3ab6018): 0x00000000 Write at address 0x00600018 (0xffffb3ab6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffae895000. Read at address 0x00600018 (0xffffae895018): 0x00000000 Write at address 0x00600018 (0xffffae895018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 ubi1:animations is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 ubi2:textures is mounted. data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa3ed8000. Read at address 0x00600018 (0xffffa3ed8018): 0x00000000 Write at address 0x00600018 (0xffffa3ed8018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff949c0000. Read at address 0x00600018 (0xffff949c0018): 0x00000000 Write at address 0x00600018 (0xffff949c0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff971a9000. Read at address 0x00600018 (0xffff971a9018): 0x00000000 Write at address 0x00600018 (0xffff971a9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8de9000. Read at address 0x00600018 (0xffffa8de9018): 0x00000000 Write at address 0x00600018 (0xffffa8de9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90cb5000. Read at address 0x00600018 (0xffff90cb5018): 0x00000000 Write at address 0x00600018 (0xffff90cb5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff822b1000. Read at address 0x00600018 (0xffff822b1018): 0x00000000 Write at address 0x00600018 (0xffff822b1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff891a6000. Read at address 0x00600018 (0xffff891a6018): 0x00000000 Write at address 0x00600018 (0xffff891a6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80f72000. Read at address 0x00600018 (0xffff80f72018): 0x00000000 Write at address 0x00600018 (0xffff80f72018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff927d5000. Read at address 0x00600018 (0xffff927d5018): 0x00000000 Write at address 0x00600018 (0xffff927d5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafc4e000. Read at address 0x00600018 (0xffffafc4e018): 0x00000000 Write at address 0x00600018 (0xffffafc4e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8d688000. Read at address 0x00600018 (0xffff8d688018): 0x00000000 Write at address 0x00600018 (0xffff8d688018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbc179000. Read at address 0x00600018 (0xffffbc179018): 0x00000000 Write at address 0x00600018 (0xffffbc179018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbeccd000. Read at address 0x00600018 (0xffffbeccd018): 0x00000000 Write at address 0x00600018 (0xffffbeccd018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff804ef000. Read at address 0x00600018 (0xffff804ef018): 0x00000000 Write at address 0x00600018 (0xffff804ef018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a545000. Read at address 0x00600018 (0xffff9a545018): 0x00000000 Write at address 0x00600018 (0xffff9a545018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a4cb000. Read at address 0x00600018 (0xffff8a4cb018): 0x00000000 Write at address 0x00600018 (0xffff8a4cb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e8a7000. Read at address 0x00600018 (0xffff9e8a7018): 0x00000000 Write at address 0x00600018 (0xffff9e8a7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa9a93000. Read at address 0x00600018 (0xffffa9a93018): 0x00000000 Write at address 0x00600018 (0xffffa9a93018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9654a000. Read at address 0x00600018 (0xffff9654a018): 0x00000000 Write at address 0x00600018 (0xffff9654a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83c03000. Read at address 0x00600018 (0xffff83c03018): 0x00000000 Write at address 0x00600018 (0xffff83c03018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f25e000. Read at address 0x00600018 (0xffff9f25e018): 0x00000000 Write at address 0x00600018 (0xffff9f25e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa1fb4000. Read at address 0x00600018 (0xffffa1fb4018): 0x00000000 Write at address 0x00600018 (0xffffa1fb4018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb8af000. Read at address 0x00600018 (0xffffbb8af018): 0x00000000 Write at address 0x00600018 (0xffffbb8af018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8c454000. Read at address 0x00600018 (0xffff8c454018): 0x00000000 Write at address 0x00600018 (0xffff8c454018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9701e000. Read at address 0x00600018 (0xffff9701e018): 0x00000000 Write at address 0x00600018 (0xffff9701e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa2875000. Read at address 0x00600018 (0xffffa2875018): 0x00000000 Write at address 0x00600018 (0xffffa2875018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa04d6000. Read at address 0x00600018 (0xffffa04d6018): 0x00000000 Write at address 0x00600018 (0xffffa04d6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9311d000. Read at address 0x00600018 (0xffff9311d018): 0x00000000 Write at address 0x00600018 (0xffff9311d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb515a000. Read at address 0x00600018 (0xffffb515a018): 0x00000000 Write at address 0x00600018 (0xffffb515a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8f1ec000. Read at address 0x00600018 (0xffff8f1ec018): 0x00000000 Write at address 0x00600018 (0xffff8f1ec018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa9bfe000. Read at address 0x00600018 (0xffffa9bfe018): 0x00000000 Write at address 0x00600018 (0xffffa9bfe018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff965fe000. Read at address 0x00600018 (0xffff965fe018): 0x00000000 Write at address 0x00600018 (0xffff965fe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff811b3000. Read at address 0x00600018 (0xffff811b3018): 0x00000000 Write at address 0x00600018 (0xffff811b3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffacd86000. Read at address 0x00600018 (0xffffacd86018): 0x00000000 Write at address 0x00600018 (0xffffacd86018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff827cc000. Read at address 0x00600018 (0xffff827cc018): 0x00000000 Write at address 0x00600018 (0xffff827cc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8cc34000. Read at address 0x00600018 (0xffff8cc34018): 0x00000000 Write at address 0x00600018 (0xffff8cc34018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafe3a000. Read at address 0x00600018 (0xffffafe3a018): 0x00000000 Write at address 0x00600018 (0xffffafe3a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff92419000. Read at address 0x00600018 (0xffff92419018): 0x00000000 Write at address 0x00600018 (0xffff92419018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ab0d000. Read at address 0x00600018 (0xffff9ab0d018): 0x00000000 Write at address 0x00600018 (0xffff9ab0d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbd2b6000. Read at address 0x00600018 (0xffffbd2b6018): 0x00000000 Write at address 0x00600018 (0xffffbd2b6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached ubi0:textures is mounted. mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb5c86000. Read at address 0x00600018 (0xffffb5c86018): 0x00000000 Write at address 0x00600018 (0xffffb5c86018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80651000. Read at address 0x00600018 (0xffff80651018): 0x00000000 Write at address 0x00600018 (0xffff80651018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8560e000. Read at address 0x00600018 (0xffff8560e018): 0x00000000 Write at address 0x00600018 (0xffff8560e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4de6000. Read at address 0x00600018 (0xffffb4de6018): 0x00000000 Write at address 0x00600018 (0xffffb4de6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb27ca000. Read at address 0x00600018 (0xffffb27ca018): 0x00000000 Write at address 0x00600018 (0xffffb27ca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3757000. Read at address 0x00600018 (0xffffb3757018): 0x00000000 Write at address 0x00600018 (0xffffb3757018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa9356000. Read at address 0x00600018 (0xffffa9356018): 0x00000000 Write at address 0x00600018 (0xffffa9356018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82a9a000. Read at address 0x00600018 (0xffff82a9a018): 0x00000000 Write at address 0x00600018 (0xffff82a9a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa111a000. Read at address 0x00600018 (0xffffa111a018): 0x00000000 Write at address 0x00600018 (0xffffa111a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa068000. Read at address 0x00600018 (0xffffaa068018): 0x00000000 Write at address 0x00600018 (0xffffaa068018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe6b4000. Read at address 0x00600018 (0xffffbe6b4018): 0x00000000 Write at address 0x00600018 (0xffffbe6b4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff97c96000. Read at address 0x00600018 (0xffff97c96018): 0x00000000 Write at address 0x00600018 (0xffff97c96018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90b02000. net.ipv6.conf.all.addr_gen_mode = 0 Read at address 0x00600018 (0xffff90b02018): 0x00000000 Write at address 0x00600018 (0xffff90b02018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa343e000. Read at address 0x00600018 (0xffffa343e018): 0x00000000 Write at address 0x00600018 (0xffffa343e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff965c3000. Read at address 0x00600018 (0xffff965c3018): 0x00000000 Write at address 0x00600018 (0xffff965c3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff99d3d000. Read at address 0x00600018 (0xffff99d3d018): 0x00000000 Write at address 0x00600018 (0xffff99d3d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c532000. Read at address 0x00600018 (0xffff9c532018): 0x00000000 Write at address 0x00600018 (0xffff9c532018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fdcd000. Read at address 0x00600018 (0xffff7fdcd018): 0x00000000 Write at address 0x00600018 (0xffff7fdcd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb26ea000. Read at address 0x00600018 (0xffffb26ea018): 0x00000000 Write at address 0x00600018 (0xffffb26ea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbd5d9000. Read at address 0x00600018 (0xffffbd5d9018): 0x00000000 Write at address 0x00600018 (0xffffbd5d9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8354d000. Read at address 0x00600018 (0xffff8354d018): 0x00000000 Write at address 0x00600018 (0xffff8354d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb00ee000. Read at address 0x00600018 (0xffffb00ee018): 0x00000000 Write at address 0x00600018 (0xffffb00ee018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6e8c000. Read at address 0x00600018 (0xffffa6e8c018): 0x00000000 Write at address 0x00600018 (0xffffa6e8c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84815000. Read at address 0x00600018 (0xffff84815018): 0x00000000 Write at address 0x00600018 (0xffff84815018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84c8f000. Read at address 0x00600018 (0xffff84c8f018): 0x00000000 Write at address 0x00600018 (0xffff84c8f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb6a65000. Read at address 0x00600018 (0xffffb6a65018): 0x00000000 Write at address 0x00600018 (0xffffb6a65018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8584e000. Read at address 0x00600018 (0xffff8584e018): 0x00000000 Write at address 0x00600018 (0xffff8584e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb153000. Read at address 0x00600018 (0xffffbb153018): 0x00000000 Write at address 0x00600018 (0xffffbb153018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff804ad000. Read at address 0x00600018 (0xffff804ad018): 0x00000000 Write at address 0x00600018 (0xffff804ad018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4ecb000. Read at address 0x00600018 (0xffffa4ecb018): 0x00000000 Write at address 0x00600018 (0xffffa4ecb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97ef4000. Read at address 0x00600018 (0xffff97ef4018): 0x00000000 Write at address 0x00600018 (0xffff97ef4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa7b60000. Read at address 0x00600018 (0xffffa7b60018): 0x00000000 Write at address 0x00600018 (0xffffa7b60018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a10c000. Read at address 0x00600018 (0xffff8a10c018): 0x00000000 Write at address 0x00600018 (0xffff8a10c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9a54a000. Read at address 0x00600018 (0xffff9a54a018): 0x00000000 Write at address 0x00600018 (0xffff9a54a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff7fddd000. Read at address 0x00600018 (0xffff7fddd018): 0x00000000 Write at address 0x00600018 (0xffff7fddd018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi1:animations is mounted. ubi0:dml_code is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb04d7000. Read at address 0x00600018 (0xffffb04d7018): 0x00000000 Write at address 0x00600018 (0xffffb04d7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9066c000. Read at address 0x00600018 (0xffff9066c018): 0x00000000 Write at address 0x00600018 (0xffff9066c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff87a53000. Read at address 0x00600018 (0xffff87a53018): 0x00000000 Write at address 0x00600018 (0xffff87a53018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7564000. Read at address 0x00600018 (0xffffa7564018): 0x00000000 Write at address 0x00600018 (0xffffa7564018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb36dd000. Read at address 0x00600018 (0xffffb36dd018): 0x00000000 Write at address 0x00600018 (0xffffb36dd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbdf26000. Read at address 0x00600018 (0xffffbdf26018): 0x00000000 Write at address 0x00600018 (0xffffbdf26018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9994b000. Read at address 0x00600018 (0xffff9994b018): 0x00000000 Write at address 0x00600018 (0xffff9994b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90213000. Read at address 0x00600018 (0xffff90213018): 0x00000000 Write at address 0x00600018 (0xffff90213018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac839000. Read at address 0x00600018 (0xffffac839018): 0x00000000 Write at address 0x00600018 (0xffffac839018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89d16000. Read at address 0x00600018 (0xffff89d16018): 0x00000000 Write at address 0x00600018 (0xffff89d16018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff959c4000. Read at address 0x00600018 (0xffff959c4018): 0x00000000 Write at address 0x00600018 (0xffff959c4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9f60e000. Read at address 0x00600018 (0xffff9f60e018): 0x00000000 Write at address 0x00600018 (0xffff9f60e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbb0f8000. Read at address 0x00600018 (0xffffbb0f8018): 0x00000000 Write at address 0x00600018 (0xffffbb0f8018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f5cf000. Read at address 0x00600018 (0xffff8f5cf018): 0x00000000 Write at address 0x00600018 (0xffff8f5cf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d12a000. Read at address 0x00600018 (0xffff8d12a018): 0x00000000 Write at address 0x00600018 (0xffff8d12a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b29a000. Read at address 0x00600018 (0xffff8b29a018): 0x00000000 Write at address 0x00600018 (0xffff8b29a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fd6c000. Read at address 0x00600018 (0xffff7fd6c018): 0x00000000 Write at address 0x00600018 (0xffff7fd6c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba641000. Read at address 0x00600018 (0xffffba641018): 0x00000000 Write at address 0x00600018 (0xffffba641018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ce1b000. Read at address 0x00600018 (0xffff9ce1b018): 0x00000000 Write at address 0x00600018 (0xffff9ce1b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffadc7a000. Read at address 0x00600018 (0xffffadc7a018): 0x00000000 Write at address 0x00600018 (0xffffadc7a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1bd8000. Read at address 0x00600018 (0xffffb1bd8018): 0x00000000 Write at address 0x00600018 (0xffffb1bd8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8cab5000. Read at address 0x00600018 (0xffff8cab5018): 0x00000000 Write at address 0x00600018 (0xffff8cab5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94dbd000. Read at address 0x00600018 (0xffff94dbd018): 0x00000000 Write at address 0x00600018 (0xffff94dbd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d73e000. Read at address 0x00600018 (0xffff9d73e018): 0x00000000 Write at address 0x00600018 (0xffff9d73e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbebe3000. Read at address 0x00600018 (0xffffbebe3018): 0x00000000 Write at address 0x00600018 (0xffffbebe3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c37b000. Read at address 0x00600018 (0xffff8c37b018): 0x00000000 Write at address 0x00600018 (0xffff8c37b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 /dev/mem opened. Memory mapped at address 0xffffb7aa1000. Read at address 0x00600018 (0xffffb7aa1018): 0x00000000 Write at address 0x00600018 (0xffffb7aa1018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 218 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8cfd000. Read at address 0x00600018 (0xffffb8cfd018): 0x00000000 Write at address 0x00600018 (0xffffb8cfd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff804f5000. Read at address 0x00600018 (0xffff804f5018): 0x00000000 Write at address 0x00600018 (0xffff804f5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffabbb0000. Read at address 0x00600018 (0xffffabbb0018): 0x00000000 Write at address 0x00600018 (0xffffabbb0018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffacc32000. Read at address 0x00600018 (0xffffacc32018): 0x00000000 Write at address 0x00600018 (0xffffacc32018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac718000. Read at address 0x00600018 (0xffffac718018): 0x00000000 Write at address 0x00600018 (0xffffac718018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6066000. Read at address 0x00600018 (0xffffb6066018): 0x00000000 Write at address 0x00600018 (0xffffb6066018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb40a000. Read at address 0x00600018 (0xffffbb40a018): 0x00000000 Write at address 0x00600018 (0xffffbb40a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e635000. Read at address 0x00600018 (0xffff9e635018): 0x00000000 Write at address 0x00600018 (0xffff9e635018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb8b71000. Read at address 0x00600018 (0xffffb8b71018): 0x00000000 Write at address 0x00600018 (0xffffb8b71018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1748000. Read at address 0x00600018 (0xffffa1748018): 0x00000000 Write at address 0x00600018 (0xffffa1748018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa71b7000. Read at address 0x00600018 (0xffffa71b7018): 0x00000000 Write at address 0x00600018 (0xffffa71b7018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa6bdc000. Read at address 0x00600018 (0xffffa6bdc018): 0x00000000 Write at address 0x00600018 (0xffffa6bdc018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9a694000. Read at address 0x00600018 (0xffff9a694018): 0x00000000 Write at address 0x00600018 (0xffff9a694018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8ffa7000. Read at address 0x00600018 (0xffff8ffa7018): 0x00000000 Write at address 0x00600018 (0xffff8ffa7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7a57000. Read at address 0x00600018 (0xffffa7a57018): 0x00000000 Write at address 0x00600018 (0xffffa7a57018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc0df000. Read at address 0x00600018 (0xffffbc0df018): 0x00000000 Write at address 0x00600018 (0xffffbc0df018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa609b000. Read at address 0x00600018 (0xffffa609b018): 0x00000000 Write at address 0x00600018 (0xffffa609b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5b1f000. Read at address 0x00600018 (0xffffa5b1f018): 0x00000000 Write at address 0x00600018 (0xffffa5b1f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafb7e000. Read at address 0x00600018 (0xffffafb7e018): 0x00000000 Write at address 0x00600018 (0xffffafb7e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8829f000. Read at address 0x00600018 (0xffff8829f018): 0x00000000 Write at address 0x00600018 (0xffff8829f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9c02e000. Read at address 0x00600018 (0xffff9c02e018): 0x00000000 Write at address 0x00600018 (0xffff9c02e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffafa0c000. Read at address 0x00600018 (0xffffafa0c018): 0x00000000 Write at address 0x00600018 (0xffffafa0c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9bf8a000. Read at address 0x00600018 (0xffff9bf8a018): 0x00000000 Write at address 0x00600018 (0xffff9bf8a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaf619000. Read at address 0x00600018 (0xffffaf619018): 0x00000000 Write at address 0x00600018 (0xffffaf619018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff80196000. Read at address 0x00600018 (0xffff80196018): 0x00000000 Write at address 0x00600018 (0xffff80196018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad980000. Read at address 0x00600018 (0xffffad980018): 0x00000000 Write at address 0x00600018 (0xffffad980018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb74cd000. Read at address 0x00600018 (0xffffb74cd018): 0x00000000 Write at address 0x00600018 (0xffffb74cd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaeca1000. Read at address 0x00600018 (0xffffaeca1018): 0x00000000 Write at address 0x00600018 (0xffffaeca1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9064d000. Read at address 0x00600018 (0xffff9064d018): 0x00000000 Write at address 0x00600018 (0xffff9064d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached ubi0:dml_code is mounted. mtd24 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae2f0000. Read at address 0x00600018 (0xffffae2f0018): 0x00000000 Write at address 0x00600018 (0xffffae2f0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff86d4b000. Read at address 0x00600018 (0xffff86d4b018): 0x00000000 Write at address 0x00600018 (0xffff86d4b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff842bd000. Read at address 0x00600018 (0xffff842bd018): 0x00000000 Write at address 0x00600018 (0xffff842bd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf708000. Read at address 0x00600018 (0xffffaf708018): 0x00000000 Write at address 0x00600018 (0xffffaf708018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff856fc000. Read at address 0x00600018 (0xffff856fc018): 0x00000000 Write at address 0x00600018 (0xffff856fc018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa2584000. Read at address 0x00600018 (0xffffa2584018): 0x00000000 Write at address 0x00600018 (0xffffa2584018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8a48a000. Read at address 0x00600018 (0xffff8a48a018): 0x00000000 Write at address 0x00600018 (0xffff8a48a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff855a0000. Read at address 0x00600018 (0xffff855a0018): 0x00000000 Write at address 0x00600018 (0xffff855a0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bb3a000. Read at address 0x00600018 (0xffff9bb3a018): 0x00000000 Write at address 0x00600018 (0xffff9bb3a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa74d6000. Read at address 0x00600018 (0xffffa74d6018): 0x00000000 Write at address 0x00600018 (0xffffa74d6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9b49c000. Read at address 0x00600018 (0xffff9b49c018): 0x00000000 Write at address 0x00600018 (0xffff9b49c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff967d6000. Read at address 0x00600018 (0xffff967d6018): 0x00000000 Write at address 0x00600018 (0xffff967d6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e4d4000. Read at address 0x00600018 (0xffff8e4d4018): 0x00000000 Write at address 0x00600018 (0xffff8e4d4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff96e85000. Read at address 0x00600018 (0xffff96e85018): 0x00000000 Write at address 0x00600018 (0xffff96e85018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb553c000. Read at address 0x00600018 (0xffffb553c018): 0x00000000 Write at address 0x00600018 (0xffffb553c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff80178000. Read at address 0x00600018 (0xffff80178018): 0x00000000 Write at address 0x00600018 (0xffff80178018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbe5b7000. Read at address 0x00600018 (0xffffbe5b7018): 0x00000000 Write at address 0x00600018 (0xffffbe5b7018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff975c8000. Read at address 0x00600018 (0xffff975c8018): 0x00000000 Write at address 0x00600018 (0xffff975c8018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87905000. Read at address 0x00600018 (0xffff87905018): 0x00000000 Write at address 0x00600018 (0xffff87905018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8a16000. Read at address 0x00600018 (0xffffb8a16018): 0x00000000 Write at address 0x00600018 (0xffffb8a16018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa24bc000. Read at address 0x00600018 (0xffffa24bc018): 0x00000000 Write at address 0x00600018 (0xffffa24bc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa50f7000. Read at address 0x00600018 (0xffffa50f7018): 0x00000000 Write at address 0x00600018 (0xffffa50f7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa530e000. Read at address 0x00600018 (0xffffa530e018): 0x00000000 Write at address 0x00600018 (0xffffa530e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff87d47000. Read at address 0x00600018 (0xffff87d47018): 0x00000000 Write at address 0x00600018 (0xffff87d47018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab597000. Read at address 0x00600018 (0xffffab597018): 0x00000000 Write at address 0x00600018 (0xffffab597018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ade4000. Read at address 0x00600018 (0xffff9ade4018): 0x00000000 Write at address 0x00600018 (0xffff9ade4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa32a3000. Read at address 0x00600018 (0xffffa32a3018): 0x00000000 Write at address 0x00600018 (0xffffa32a3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa098a000. Read at address 0x00600018 (0xffffa098a018): 0x00000000 Write at address 0x00600018 (0xffffa098a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb393a000. Read at address 0x00600018 (0xffffb393a018): 0x00000000 Write at address 0x00600018 (0xffffb393a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5edf000. Read at address 0x00600018 (0xffffb5edf018): 0x00000000 Write at address 0x00600018 (0xffffb5edf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81e8b000. Read at address 0x00600018 (0xffff81e8b018): 0x00000000 Write at address 0x00600018 (0xffff81e8b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4190000. Read at address 0x00600018 (0xffffb4190018): 0x00000000 Write at address 0x00600018 (0xffffb4190018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff91b02000. Read at address 0x00600018 (0xffff91b02018): 0x00000000 Write at address 0x00600018 (0xffff91b02018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaa45f000. Read at address 0x00600018 (0xffffaa45f018): 0x00000000 Write at address 0x00600018 (0xffffaa45f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb33f8000. Read at address 0x00600018 (0xffffb33f8018): 0x00000000 Write at address 0x00600018 (0xffffb33f8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff88f5d000. Read at address 0x00600018 (0xffff88f5d018): 0x00000000 Write at address 0x00600018 (0xffff88f5d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff892b9000. Read at address 0x00600018 (0xffff892b9018): 0x00000000 Write at address 0x00600018 (0xffff892b9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out rpmsg_char_open: _rpmsg_char_open_eptdev failed Ipc_InitDriver: rpmsg_char_open failed, retrying... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84a82000. Read at address 0x00600018 (0xffff84a82018): 0x00000000 Write at address 0x00600018 (0xffff84a82018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff845e0000. Read at address 0x00600018 (0xffff845e0018): 0x00000000 Write at address 0x00600018 (0xffff845e0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5386000. Read at address 0x00600018 (0xffffb5386018): 0x00000000 Write at address 0x00600018 (0xffffb5386018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7ce8000. Read at address 0x00600018 (0xffffa7ce8018): 0x00000000 Write at address 0x00600018 (0xffffa7ce8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffba792000. Read at address 0x00600018 (0xffffba792018): 0x00000000 Write at address 0x00600018 (0xffffba792018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb3200000. Read at address 0x00600018 (0xffffb3200018): 0x00000000 Write at address 0x00600018 (0xffffb3200018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb0eb5000. Read at address 0x00600018 (0xffffb0eb5018): 0x00000000 Write at address 0x00600018 (0xffffb0eb5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff945fc000. Read at address 0x00600018 (0xffff945fc018): 0x00000000 Write at address 0x00600018 (0xffff945fc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb5ea5000. Read at address 0x00600018 (0xffffb5ea5018): 0x00000000 Write at address 0x00600018 (0xffffb5ea5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff926bf000. Read at address 0x00600018 (0xffff926bf018): 0x00000000 Write at address 0x00600018 (0xffff926bf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9a57000. Read at address 0x00600018 (0xffffb9a57018): 0x00000000 Write at address 0x00600018 (0xffffb9a57018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8cc0b000. Read at address 0x00600018 (0xffff8cc0b018): 0x00000000 Write at address 0x00600018 (0xffff8cc0b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffacb93000. Read at address 0x00600018 (0xffffacb93018): 0x00000000 Write at address 0x00600018 (0xffffacb93018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96f82000. Read at address 0x00600018 (0xffff96f82018): 0x00000000 Write at address 0x00600018 (0xffff96f82018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbe04d000. Read at address 0x00600018 (0xffffbe04d018): 0x00000000 Write at address 0x00600018 (0xffffbe04d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82009000. Read at address 0x00600018 (0xffff82009018): 0x00000000 Write at address 0x00600018 (0xffff82009018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 net.ipv6.conf.eth0.dad_transmits = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b6b9000. Read at address 0x00600018 (0xffff8b6b9018): 0x00000000 Write at address 0x00600018 (0xffff8b6b9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa5917000. Read at address 0x00600018 (0xffffa5917018): 0x00000000 Write at address 0x00600018 (0xffffa5917018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb1ee7000. Read at address 0x00600018 (0xffffb1ee7018): 0x00000000 Write at address 0x00600018 (0xffffb1ee7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff94f67000. Read at address 0x00600018 (0xffff94f67018): 0x00000000 Write at address 0x00600018 (0xffff94f67018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa64b7000. Read at address 0x00600018 (0xffffa64b7018): 0x00000000 Write at address 0x00600018 (0xffffa64b7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9cd93000. Read at address 0x00600018 (0xffff9cd93018): 0x00000000 Write at address 0x00600018 (0xffff9cd93018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa2677000. Read at address 0x00600018 (0xffffa2677018): 0x00000000 Write at address 0x00600018 (0xffffa2677018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff94dfc000. Read at address 0x00600018 (0xffff94dfc018): 0x00000000 Write at address 0x00600018 (0xffff94dfc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb9d53000. Read at address 0x00600018 (0xffffb9d53018): 0x00000000 Write at address 0x00600018 (0xffffb9d53018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff85fda000. Read at address 0x00600018 (0xffff85fda018): 0x00000000 Write at address 0x00600018 (0xffff85fda018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb908b000. Read at address 0x00600018 (0xffffb908b018): 0x00000000 Write at address 0x00600018 (0xffffb908b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90790000. Read at address 0x00600018 (0xffff90790018): 0x00000000 Write at address 0x00600018 (0xffff90790018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b666000. Read at address 0x00600018 (0xffff8b666018): 0x00000000 Write at address 0x00600018 (0xffff8b666018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb017c000. Read at address 0x00600018 (0xffffb017c018): 0x00000000 Write at address 0x00600018 (0xffffb017c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa19d5000. Read at address 0x00600018 (0xffffa19d5018): 0x00000000 Write at address 0x00600018 (0xffffa19d5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff88627000. Read at address 0x00600018 (0xffff88627018): 0x00000000 Write at address 0x00600018 (0xffff88627018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5d47000. Read at address 0x00600018 (0xffffa5d47018): 0x00000000 Write at address 0x00600018 (0xffffa5d47018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e4bd000. Read at address 0x00600018 (0xffff9e4bd018): 0x00000000 Write at address 0x00600018 (0xffff9e4bd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa887c000. Read at address 0x00600018 (0xffffa887c018): 0x00000000 Write at address 0x00600018 (0xffffa887c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96fc6000. Read at address 0x00600018 (0xffff96fc6018): 0x00000000 Write at address 0x00600018 (0xffff96fc6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff90715000. Read at address 0x00600018 (0xffff90715018): 0x00000000 Write at address 0x00600018 (0xffff90715018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb05e6000. Read at address 0x00600018 (0xffffb05e6018): 0x00000000 Write at address 0x00600018 (0xffffb05e6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba558000. Read at address 0x00600018 (0xffffba558018): 0x00000000 Write at address 0x00600018 (0xffffba558018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaf81f000. Read at address 0x00600018 (0xffffaf81f018): 0x00000000 Write at address 0x00600018 (0xffffaf81f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88033000. Read at address 0x00600018 (0xffff88033018): 0x00000000 Write at address 0x00600018 (0xffff88033018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5e05000. Read at address 0x00600018 (0xffffa5e05018): 0x00000000 Write at address 0x00600018 (0xffffa5e05018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5071000. Read at address 0x00600018 (0xffffb5071018): 0x00000000 Write at address 0x00600018 (0xffffb5071018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0f9f000. Read at address 0x00600018 (0xffffb0f9f018): 0x00000000 Write at address 0x00600018 (0xffffb0f9f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb67fe000. Read at address 0x00600018 (0xffffb67fe018): 0x00000000 Write at address 0x00600018 (0xffffb67fe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4600000. Read at address 0x00600018 (0xffffb4600018): 0x00000000 Write at address 0x00600018 (0xffffb4600018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98929000. Read at address 0x00600018 (0xffff98929018): 0x00000000 Write at address 0x00600018 (0xffff98929018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi1:dml_code is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa13c9000. Read at address 0x00600018 (0xffffa13c9018): 0x00000000 Write at address 0x00600018 (0xffffa13c9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1e60000. Read at address 0x00600018 (0xffffa1e60018): 0x00000000 Write at address 0x00600018 (0xffffa1e60018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d688000. Read at address 0x00600018 (0xffff8d688018): 0x00000000 Write at address 0x00600018 (0xffff8d688018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb3f92000. Read at address 0x00600018 (0xffffb3f92018): 0x00000000 Write at address 0x00600018 (0xffffb3f92018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7764000. Read at address 0x00600018 (0xffffb7764018): 0x00000000 Write at address 0x00600018 (0xffffb7764018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaa479000. Read at address 0x00600018 (0xffffaa479018): 0x00000000 Write at address 0x00600018 (0xffffaa479018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99eb6000. Read at address 0x00600018 (0xffff99eb6018): 0x00000000 Write at address 0x00600018 (0xffff99eb6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7aad000. Read at address 0x00600018 (0xffffa7aad018): 0x00000000 Write at address 0x00600018 (0xffffa7aad018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f3e8000. Read at address 0x00600018 (0xffff9f3e8018): 0x00000000 Write at address 0x00600018 (0xffff9f3e8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92f60000. Read at address 0x00600018 (0xffff92f60018): 0x00000000 Write at address 0x00600018 (0xffff92f60018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbc13b000. Read at address 0x00600018 (0xffffbc13b018): 0x00000000 Write at address 0x00600018 (0xffffbc13b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2e41000. Read at address 0x00600018 (0xffffa2e41018): 0x00000000 Write at address 0x00600018 (0xffffa2e41018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a629000. Read at address 0x00600018 (0xffff9a629018): 0x00000000 Write at address 0x00600018 (0xffff9a629018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b050000. Read at address 0x00600018 (0xffff8b050018): 0x00000000 Write at address 0x00600018 (0xffff8b050018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ee29000. Read at address 0x00600018 (0xffff8ee29018): 0x00000000 Write at address 0x00600018 (0xffff8ee29018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8876c000. Read at address 0x00600018 (0xffff8876c018): 0x00000000 Write at address 0x00600018 (0xffff8876c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90d5d000. Read at address 0x00600018 (0xffff90d5d018): 0x00000000 Write at address 0x00600018 (0xffff90d5d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba029000. Read at address 0x00600018 (0xffffba029018): 0x00000000 Write at address 0x00600018 (0xffffba029018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94840000. Read at address 0x00600018 (0xffff94840018): 0x00000000 Write at address 0x00600018 (0xffff94840018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae97e000. Read at address 0x00600018 (0xffffae97e018): 0x00000000 Write at address 0x00600018 (0xffffae97e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4d32000. Read at address 0x00600018 (0xffffb4d32018): 0x00000000 Write at address 0x00600018 (0xffffb4d32018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad8c9000. Read at address 0x00600018 (0xffffad8c9018): 0x00000000 Write at address 0x00600018 (0xffffad8c9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac5b4000. Read at address 0x00600018 (0xffffac5b4018): 0x00000000 Write at address 0x00600018 (0xffffac5b4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a6b6000. Read at address 0x00600018 (0xffff9a6b6018): 0x00000000 Write at address 0x00600018 (0xffff9a6b6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9f30000. Read at address 0x00600018 (0xffffb9f30018): 0x00000000 Write at address 0x00600018 (0xffffb9f30018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff865ff000. Read at address 0x00600018 (0xffff865ff018): 0x00000000 Write at address 0x00600018 (0xffff865ff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff84512000. Read at address 0x00600018 (0xffff84512018): 0x00000000 Write at address 0x00600018 (0xffff84512018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaa573000. Read at address 0x00600018 (0xffffaa573018): 0x00000000 Write at address 0x00600018 (0xffffaa573018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa89cd000. Read at address 0x00600018 (0xffffa89cd018): 0x00000000 Write at address 0x00600018 (0xffffa89cd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe496000. Read at address 0x00600018 (0xffffbe496018): 0x00000000 Write at address 0x00600018 (0xffffbe496018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba915000. Read at address 0x00600018 (0xffffba915018): 0x00000000 Write at address 0x00600018 (0xffffba915018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8704c000. Read at address 0x00600018 (0xffff8704c018): 0x00000000 Write at address 0x00600018 (0xffff8704c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbb395000. Read at address 0x00600018 (0xffffbb395018): 0x00000000 Write at address 0x00600018 (0xffffbb395018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f92c000. Read at address 0x00600018 (0xffff9f92c018): 0x00000000 Write at address 0x00600018 (0xffff9f92c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92b91000. Read at address 0x00600018 (0xffff92b91018): 0x00000000 Write at address 0x00600018 (0xffff92b91018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9eea5000. Read at address 0x00600018 (0xffff9eea5018): 0x00000000 Write at address 0x00600018 (0xffff9eea5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85196000. Read at address 0x00600018 (0xffff85196018): 0x00000000 Write at address 0x00600018 (0xffff85196018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff82a77000. Read at address 0x00600018 (0xffff82a77018): 0x00000000 Write at address 0x00600018 (0xffff82a77018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa5685000. Read at address 0x00600018 (0xffffa5685018): 0x00000000 Write at address 0x00600018 (0xffffa5685018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bc40000. Read at address 0x00600018 (0xffff9bc40018): 0x00000000 Write at address 0x00600018 (0xffff9bc40018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbde93000. Read at address 0x00600018 (0xffffbde93018): 0x00000000 Write at address 0x00600018 (0xffffbde93018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9d8b000. Read at address 0x00600018 (0xffffa9d8b018): 0x00000000 Write at address 0x00600018 (0xffffa9d8b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbdc6d000. Read at address 0x00600018 (0xffffbdc6d018): 0x00000000 Write at address 0x00600018 (0xffffbdc6d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f8c4000. Read at address 0x00600018 (0xffff9f8c4018): 0x00000000 Write at address 0x00600018 (0xffff9f8c4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb6f07000. Read at address 0x00600018 (0xffffb6f07018): 0x00000000 Write at address 0x00600018 (0xffffb6f07018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff84fc8000. Read at address 0x00600018 (0xffff84fc8018): 0x00000000 Write at address 0x00600018 (0xffff84fc8018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffadb3b000. Read at address 0x00600018 (0xffffadb3b018): 0x00000000 Write at address 0x00600018 (0xffffadb3b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi2:dml_code is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb47d000. Read at address 0x00600018 (0xffffbb47d018): 0x00000000 Write at address 0x00600018 (0xffffbb47d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99e25000. Read at address 0x00600018 (0xffff99e25018): 0x00000000 Write at address 0x00600018 (0xffff99e25018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac043000. Read at address 0x00600018 (0xffffac043018): 0x00000000 Write at address 0x00600018 (0xffffac043018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb2359000. Read at address 0x00600018 (0xffffb2359018): 0x00000000 Write at address 0x00600018 (0xffffb2359018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9fdfe000. Read at address 0x00600018 (0xffff9fdfe018): 0x00000000 Write at address 0x00600018 (0xffff9fdfe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8a5cf000. Read at address 0x00600018 (0xffff8a5cf018): 0x00000000 Write at address 0x00600018 (0xffff8a5cf018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa09c4000. Read at address 0x00600018 (0xffffa09c4018): 0x00000000 Write at address 0x00600018 (0xffffa09c4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9fe0000. Read at address 0x00600018 (0xffffb9fe0018): 0x00000000 Write at address 0x00600018 (0xffffb9fe0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8dd58000. Read at address 0x00600018 (0xffff8dd58018): 0x00000000 Write at address 0x00600018 (0xffff8dd58018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8deaf000. Read at address 0x00600018 (0xffff8deaf018): 0x00000000 Write at address 0x00600018 (0xffff8deaf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9bbc000. Read at address 0x00600018 (0xffffa9bbc018): 0x00000000 Write at address 0x00600018 (0xffffa9bbc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90be1000. Read at address 0x00600018 (0xffff90be1018): 0x00000000 Write at address 0x00600018 (0xffff90be1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb55b3000. Read at address 0x00600018 (0xffffb55b3018): 0x00000000 Write at address 0x00600018 (0xffffb55b3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2809000. Read at address 0x00600018 (0xffffb2809018): 0x00000000 Write at address 0x00600018 (0xffffb2809018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95c5f000. Read at address 0x00600018 (0xffff95c5f018): 0x00000000 Write at address 0x00600018 (0xffff95c5f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84ecf000. Read at address 0x00600018 (0xffff84ecf018): 0x00000000 Write at address 0x00600018 (0xffff84ecf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9793f000. Read at address 0x00600018 (0xffff9793f018): 0x00000000 Write at address 0x00600018 (0xffff9793f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d9f4000. Read at address 0x00600018 (0xffff9d9f4018): 0x00000000 Write at address 0x00600018 (0xffff9d9f4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bc75000. Read at address 0x00600018 (0xffff9bc75018): 0x00000000 Write at address 0x00600018 (0xffff9bc75018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffac186000. Read at address 0x00600018 (0xffffac186018): 0x00000000 Write at address 0x00600018 (0xffffac186018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91de4000. Read at address 0x00600018 (0xffff91de4018): 0x00000000 Write at address 0x00600018 (0xffff91de4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb85ff000. Read at address 0x00600018 (0xffffb85ff018): 0x00000000 Write at address 0x00600018 (0xffffb85ff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1096000. Read at address 0x00600018 (0xffffb1096018): 0x00000000 Write at address 0x00600018 (0xffffb1096018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb1ab0000. Read at address 0x00600018 (0xffffb1ab0018): 0x00000000 Write at address 0x00600018 (0xffffb1ab0018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8b85000. Read at address 0x00600018 (0xffffa8b85018): 0x00000000 Write at address 0x00600018 (0xffffa8b85018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8467b000. Read at address 0x00600018 (0xffff8467b018): 0x00000000 Write at address 0x00600018 (0xffff8467b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbef73000. Read at address 0x00600018 (0xffffbef73018): 0x00000000 Write at address 0x00600018 (0xffffbef73018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff84607000. Read at address 0x00600018 (0xffff84607018): 0x00000000 Write at address 0x00600018 (0xffff84607018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8628f000. Read at address 0x00600018 (0xffff8628f018): 0x00000000 Write at address 0x00600018 (0xffff8628f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9fd96000. Read at address 0x00600018 (0xffff9fd96018): 0x00000000 Write at address 0x00600018 (0xffff9fd96018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi1:textures is mounted. mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffaed12000. Read at address 0x00600018 (0xffffaed12018): 0x00000000 Write at address 0x00600018 (0xffffaed12018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbee50000. Read at address 0x00600018 (0xffffbee50018): 0x00000000 Write at address 0x00600018 (0xffffbee50018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb4ef7000. Read at address 0x00600018 (0xffffb4ef7018): 0x00000000 Write at address 0x00600018 (0xffffb4ef7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4f0a000. Read at address 0x00600018 (0xffffa4f0a018): 0x00000000 Write at address 0x00600018 (0xffffa4f0a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f562000. Read at address 0x00600018 (0xffff9f562018): 0x00000000 Write at address 0x00600018 (0xffff9f562018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff863d6000. Read at address 0x00600018 (0xffff863d6018): 0x00000000 Write at address 0x00600018 (0xffff863d6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b840000. Read at address 0x00600018 (0xffff9b840018): 0x00000000 Write at address 0x00600018 (0xffff9b840018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89391000. Read at address 0x00600018 (0xffff89391018): 0x00000000 Write at address 0x00600018 (0xffff89391018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9927a000. Read at address 0x00600018 (0xffff9927a018): 0x00000000 Write at address 0x00600018 (0xffff9927a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb104d000. Read at address 0x00600018 (0xffffb104d018): 0x00000000 Write at address 0x00600018 (0xffffb104d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff801fb000. Read at address 0x00600018 (0xffff801fb018): 0x00000000 Write at address 0x00600018 (0xffff801fb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb5029000. Read at address 0x00600018 (0xffffb5029018): 0x00000000 Write at address 0x00600018 (0xffffb5029018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9d2a4000. Read at address 0x00600018 (0xffff9d2a4018): 0x00000000 Write at address 0x00600018 (0xffff9d2a4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6754000. Read at address 0x00600018 (0xffffb6754018): 0x00000000 Write at address 0x00600018 (0xffffb6754018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ebb1000. Read at address 0x00600018 (0xffff9ebb1018): 0x00000000 Write at address 0x00600018 (0xffff9ebb1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached ubi0:animations is mounted. mtd24 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf13f000. Read at address 0x00600018 (0xffffaf13f018): 0x00000000 Write at address 0x00600018 (0xffffaf13f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9555b000. Read at address 0x00600018 (0xffff9555b018): 0x00000000 Write at address 0x00600018 (0xffff9555b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2198000. Read at address 0x00600018 (0xffffb2198018): 0x00000000 Write at address 0x00600018 (0xffffb2198018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc503000. Read at address 0x00600018 (0xffffbc503018): 0x00000000 Write at address 0x00600018 (0xffffbc503018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e96b000. Read at address 0x00600018 (0xffff9e96b018): 0x00000000 Write at address 0x00600018 (0xffff9e96b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd16e000. Read at address 0x00600018 (0xffffbd16e018): 0x00000000 Write at address 0x00600018 (0xffffbd16e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92c16000. Read at address 0x00600018 (0xffff92c16018): 0x00000000 Write at address 0x00600018 (0xffff92c16018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97ba2000. Read at address 0x00600018 (0xffff97ba2018): 0x00000000 Write at address 0x00600018 (0xffff97ba2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb94de000. Read at address 0x00600018 (0xffffb94de018): 0x00000000 Write at address 0x00600018 (0xffffb94de018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4d31000. Read at address 0x00600018 (0xffffa4d31018): 0x00000000 Write at address 0x00600018 (0xffffa4d31018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81c98000. Read at address 0x00600018 (0xffff81c98018): 0x00000000 Write at address 0x00600018 (0xffff81c98018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93f60000. Read at address 0x00600018 (0xffff93f60018): 0x00000000 Write at address 0x00600018 (0xffff93f60018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff90033000. Read at address 0x00600018 (0xffff90033018): 0x00000000 Write at address 0x00600018 (0xffff90033018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6bae000. Read at address 0x00600018 (0xffffb6bae018): 0x00000000 Write at address 0x00600018 (0xffffb6bae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9643a000. Read at address 0x00600018 (0xffff9643a018): 0x00000000 Write at address 0x00600018 (0xffff9643a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff91462000. Read at address 0x00600018 (0xffff91462018): 0x00000000 Write at address 0x00600018 (0xffff91462018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb1eef000. Read at address 0x00600018 (0xffffb1eef018): 0x00000000 Write at address 0x00600018 (0xffffb1eef018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbf415000. Read at address 0x00600018 (0xffffbf415018): 0x00000000 Write at address 0x00600018 (0xffffbf415018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ce6a000. Read at address 0x00600018 (0xffff9ce6a018): 0x00000000 Write at address 0x00600018 (0xffff9ce6a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e4d5000. Read at address 0x00600018 (0xffff9e4d5018): 0x00000000 Write at address 0x00600018 (0xffff9e4d5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi2:animations is mounted. RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa30c5000. Read at address 0x00600018 (0xffffa30c5018): 0x00000000 Write at address 0x00600018 (0xffffa30c5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff911c9000. Read at address 0x00600018 (0xffff911c9018): 0x00000000 Write at address 0x00600018 (0xffff911c9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8efeb000. Read at address 0x00600018 (0xffff8efeb018): 0x00000000 Write at address 0x00600018 (0xffff8efeb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82228000. Read at address 0x00600018 (0xffff82228018): 0x00000000 Write at address 0x00600018 (0xffff82228018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff912fe000. Read at address 0x00600018 (0xffff912fe018): 0x00000000 Write at address 0x00600018 (0xffff912fe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83002000. Read at address 0x00600018 (0xffff83002018): 0x00000000 Write at address 0x00600018 (0xffff83002018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff959e1000. Read at address 0x00600018 (0xffff959e1018): 0x00000000 Write at address 0x00600018 (0xffff959e1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84bcd000. Read at address 0x00600018 (0xffff84bcd018): 0x00000000 Write at address 0x00600018 (0xffff84bcd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8119e000. Read at address 0x00600018 (0xffff8119e018): 0x00000000 Write at address 0x00600018 (0xffff8119e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84ab8000. Read at address 0x00600018 (0xffff84ab8018): 0x00000000 Write at address 0x00600018 (0xffff84ab8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff894b5000. Read at address 0x00600018 (0xffff894b5018): 0x00000000 Write at address 0x00600018 (0xffff894b5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9d3ff000. Read at address 0x00600018 (0xffff9d3ff018): 0x00000000 Write at address 0x00600018 (0xffff9d3ff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f912000. Read at address 0x00600018 (0xffff8f912018): 0x00000000 Write at address 0x00600018 (0xffff8f912018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8c339000. Read at address 0x00600018 (0xffff8c339018): 0x00000000 Write at address 0x00600018 (0xffff8c339018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffadda3000. Read at address 0x00600018 (0xffffadda3018): 0x00000000 Write at address 0x00600018 (0xffffadda3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa3ebe000. Read at address 0x00600018 (0xffffa3ebe018): 0x00000000 Write at address 0x00600018 (0xffffa3ebe018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa4774000. Read at address 0x00600018 (0xffffa4774018): 0x00000000 Write at address 0x00600018 (0xffffa4774018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff846aa000. Read at address 0x00600018 (0xffff846aa018): 0x00000000 Write at address 0x00600018 (0xffff846aa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab4af000. Read at address 0x00600018 (0xffffab4af018): 0x00000000 Write at address 0x00600018 (0xffffab4af018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab4a2000. Read at address 0x00600018 (0xffffab4a2018): 0x00000000 Write at address 0x00600018 (0xffffab4a2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffacb38000. Read at address 0x00600018 (0xffffacb38018): 0x00000000 Write at address 0x00600018 (0xffffacb38018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa322a000. Read at address 0x00600018 (0xffffa322a018): 0x00000000 Write at address 0x00600018 (0xffffa322a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93f46000. Read at address 0x00600018 (0xffff93f46018): 0x00000000 Write at address 0x00600018 (0xffff93f46018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa8ead000. Read at address 0x00600018 (0xffffa8ead018): 0x00000000 Write at address 0x00600018 (0xffffa8ead018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88ad7000. Read at address 0x00600018 (0xffff88ad7018): 0x00000000 Write at address 0x00600018 (0xffff88ad7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa23bb000. Read at address 0x00600018 (0xffffa23bb018): 0x00000000 Write at address 0x00600018 (0xffffa23bb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa156c000. Read at address 0x00600018 (0xffffa156c018): 0x00000000 Write at address 0x00600018 (0xffffa156c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7f3a000. Read at address 0x00600018 (0xffffa7f3a018): 0x00000000 Write at address 0x00600018 (0xffffa7f3a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 ubi1:animations is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa453f000. Read at address 0x00600018 (0xffffa453f018): 0x00000000 Write at address 0x00600018 (0xffffa453f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff82b92000. Read at address 0x00600018 (0xffff82b92018): 0x00000000 Write at address 0x00600018 (0xffff82b92018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb620c000. Read at address 0x00600018 (0xffffb620c018): 0x00000000 Write at address 0x00600018 (0xffffb620c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd747000. Read at address 0x00600018 (0xffffbd747018): 0x00000000 Write at address 0x00600018 (0xffffbd747018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8e9ab000. Read at address 0x00600018 (0xffff8e9ab018): 0x00000000 Write at address 0x00600018 (0xffff8e9ab018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91545000. Read at address 0x00600018 (0xffff91545018): 0x00000000 Write at address 0x00600018 (0xffff91545018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5bde000. Read at address 0x00600018 (0xffffa5bde018): 0x00000000 Write at address 0x00600018 (0xffffa5bde018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbcecc000. Read at address 0x00600018 (0xffffbcecc018): 0x00000000 Write at address 0x00600018 (0xffffbcecc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadefa000. Read at address 0x00600018 (0xffffadefa018): 0x00000000 Write at address 0x00600018 (0xffffadefa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8ba9000. Read at address 0x00600018 (0xffffb8ba9018): 0x00000000 Write at address 0x00600018 (0xffffb8ba9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96f05000. Read at address 0x00600018 (0xffff96f05018): 0x00000000 Write at address 0x00600018 (0xffff96f05018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa689e000. Read at address 0x00600018 (0xffffa689e018): 0x00000000 Write at address 0x00600018 (0xffffa689e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff93f2e000. Read at address 0x00600018 (0xffff93f2e018): 0x00000000 Write at address 0x00600018 (0xffff93f2e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbc778000. Read at address 0x00600018 (0xffffbc778018): 0x00000000 Write at address 0x00600018 (0xffffbc778018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa3fce000. Read at address 0x00600018 (0xffffa3fce018): 0x00000000 Write at address 0x00600018 (0xffffa3fce018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb70c4000. Read at address 0x00600018 (0xffffb70c4018): 0x00000000 Write at address 0x00600018 (0xffffb70c4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffac71d000. Read at address 0x00600018 (0xffffac71d018): 0x00000000 Write at address 0x00600018 (0xffffac71d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa7e6d000. Read at address 0x00600018 (0xffffa7e6d018): 0x00000000 Write at address 0x00600018 (0xffffa7e6d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae6a8000. Read at address 0x00600018 (0xffffae6a8018): 0x00000000 Write at address 0x00600018 (0xffffae6a8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c281000. Read at address 0x00600018 (0xffff9c281018): 0x00000000 Write at address 0x00600018 (0xffff9c281018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbb993000. Read at address 0x00600018 (0xffffbb993018): 0x00000000 Write at address 0x00600018 (0xffffbb993018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8c853000. Read at address 0x00600018 (0xffff8c853018): 0x00000000 Write at address 0x00600018 (0xffff8c853018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb9fc0000. Read at address 0x00600018 (0xffffb9fc0018): 0x00000000 Write at address 0x00600018 (0xffffb9fc0018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2567000. Read at address 0x00600018 (0xffffb2567018): 0x00000000 Write at address 0x00600018 (0xffffb2567018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91795000. Read at address 0x00600018 (0xffff91795018): 0x00000000 Write at address 0x00600018 (0xffff91795018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9416c000. Read at address 0x00600018 (0xffff9416c018): 0x00000000 Write at address 0x00600018 (0xffff9416c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa04b8000. Read at address 0x00600018 (0xffffa04b8018): 0x00000000 Write at address 0x00600018 (0xffffa04b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffad01a000. Read at address 0x00600018 (0xffffad01a018): 0x00000000 Write at address 0x00600018 (0xffffad01a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97049000. Read at address 0x00600018 (0xffff97049018): 0x00000000 Write at address 0x00600018 (0xffff97049018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbbf8b000. Read at address 0x00600018 (0xffffbbf8b018): 0x00000000 Write at address 0x00600018 (0xffffbbf8b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9fb7e000. Read at address 0x00600018 (0xffff9fb7e018): 0x00000000 Write at address 0x00600018 (0xffff9fb7e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9fe36000. Read at address 0x00600018 (0xffff9fe36018): 0x00000000 Write at address 0x00600018 (0xffff9fe36018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a6ab000. Read at address 0x00600018 (0xffff9a6ab018): 0x00000000 Write at address 0x00600018 (0xffff9a6ab018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff859ea000. Read at address 0x00600018 (0xffff859ea018): 0x00000000 Write at address 0x00600018 (0xffff859ea018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb1d05000. Read at address 0x00600018 (0xffffb1d05018): 0x00000000 Write at address 0x00600018 (0xffffb1d05018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb663a000. Read at address 0x00600018 (0xffffb663a018): 0x00000000 Write at address 0x00600018 (0xffffb663a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb47fd000. Read at address 0x00600018 (0xffffb47fd018): 0x00000000 Write at address 0x00600018 (0xffffb47fd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb828d000. Read at address 0x00600018 (0xffffb828d018): 0x00000000 Write at address 0x00600018 (0xffffb828d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb643e000. Read at address 0x00600018 (0xffffb643e018): 0x00000000 Write at address 0x00600018 (0xffffb643e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa2088000. Read at address 0x00600018 (0xffffa2088018): 0x00000000 Write at address 0x00600018 (0xffffa2088018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa320b000. Read at address 0x00600018 (0xffffa320b018): 0x00000000 Write at address 0x00600018 (0xffffa320b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac334000. Read at address 0x00600018 (0xffffac334018): 0x00000000 Write at address 0x00600018 (0xffffac334018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff86e1d000. Read at address 0x00600018 (0xffff86e1d018): 0x00000000 Write at address 0x00600018 (0xffff86e1d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa04db000. Read at address 0x00600018 (0xffffa04db018): 0x00000000 Write at address 0x00600018 (0xffffa04db018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9198e000. Read at address 0x00600018 (0xffff9198e018): 0x00000000 Write at address 0x00600018 (0xffff9198e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82288000. Read at address 0x00600018 (0xffff82288018): 0x00000000 Write at address 0x00600018 (0xffff82288018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d6c1000. Read at address 0x00600018 (0xffff8d6c1018): 0x00000000 Write at address 0x00600018 (0xffff8d6c1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached ubi0:animations is mounted. mtd24 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff961a4000. Read at address 0x00600018 (0xffff961a4018): 0x00000000 Write at address 0x00600018 (0xffff961a4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbab7b000. Read at address 0x00600018 (0xffffbab7b018): 0x00000000 Write at address 0x00600018 (0xffffbab7b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4ab8000. Read at address 0x00600018 (0xffffb4ab8018): 0x00000000 Write at address 0x00600018 (0xffffb4ab8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff85248000. Read at address 0x00600018 (0xffff85248018): 0x00000000 Write at address 0x00600018 (0xffff85248018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e242000. Read at address 0x00600018 (0xffff9e242018): 0x00000000 Write at address 0x00600018 (0xffff9e242018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad1d0000. Read at address 0x00600018 (0xffffad1d0018): 0x00000000 Write at address 0x00600018 (0xffffad1d0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9426f000. Read at address 0x00600018 (0xffff9426f018): 0x00000000 Write at address 0x00600018 (0xffff9426f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f7e5000. Read at address 0x00600018 (0xffff9f7e5018): 0x00000000 Write at address 0x00600018 (0xffff9f7e5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98099000. Read at address 0x00600018 (0xffff98099018): 0x00000000 Write at address 0x00600018 (0xffff98099018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb298e000. Read at address 0x00600018 (0xffffb298e018): 0x00000000 Write at address 0x00600018 (0xffffb298e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c403000. Read at address 0x00600018 (0xffff9c403018): 0x00000000 Write at address 0x00600018 (0xffff9c403018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d5c7000. Read at address 0x00600018 (0xffff8d5c7018): 0x00000000 Write at address 0x00600018 (0xffff8d5c7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff87556000. Read at address 0x00600018 (0xffff87556018): 0x00000000 Write at address 0x00600018 (0xffff87556018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa791000. Read at address 0x00600018 (0xffffaa791018): 0x00000000 Write at address 0x00600018 (0xffffaa791018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d216000. Read at address 0x00600018 (0xffff8d216018): 0x00000000 Write at address 0x00600018 (0xffff8d216018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa8aec000. Read at address 0x00600018 (0xffffa8aec018): 0x00000000 Write at address 0x00600018 (0xffffa8aec018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd30d000. Read at address 0x00600018 (0xffffbd30d018): 0x00000000 Write at address 0x00600018 (0xffffbd30d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80ec1000. Read at address 0x00600018 (0xffff80ec1018): 0x00000000 Write at address 0x00600018 (0xffff80ec1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88fe6000. Read at address 0x00600018 (0xffff88fe6018): 0x00000000 Write at address 0x00600018 (0xffff88fe6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83501000. Read at address 0x00600018 (0xffff83501018): 0x00000000 Write at address 0x00600018 (0xffff83501018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97f38000. Read at address 0x00600018 (0xffff97f38018): 0x00000000 Write at address 0x00600018 (0xffff97f38018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82728000. Read at address 0x00600018 (0xffff82728018): 0x00000000 Write at address 0x00600018 (0xffff82728018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fd18000. Read at address 0x00600018 (0xffff8fd18018): 0x00000000 Write at address 0x00600018 (0xffff8fd18018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf536000. Read at address 0x00600018 (0xffffbf536018): 0x00000000 Write at address 0x00600018 (0xffffbf536018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88165000. Read at address 0x00600018 (0xffff88165018): 0x00000000 Write at address 0x00600018 (0xffff88165018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff83ad5000. Read at address 0x00600018 (0xffff83ad5018): 0x00000000 Write at address 0x00600018 (0xffff83ad5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7bdf000. Read at address 0x00600018 (0xffffa7bdf018): 0x00000000 Write at address 0x00600018 (0xffffa7bdf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbaa68000. Read at address 0x00600018 (0xffffbaa68018): 0x00000000 Write at address 0x00600018 (0xffffbaa68018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb33ce000. Read at address 0x00600018 (0xffffb33ce018): 0x00000000 Write at address 0x00600018 (0xffffb33ce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8cfe000. Read at address 0x00600018 (0xffffb8cfe018): 0x00000000 Write at address 0x00600018 (0xffffb8cfe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 ubi2:textures is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff89f22000. Read at address 0x00600018 (0xffff89f22018): 0x00000000 Write at address 0x00600018 (0xffff89f22018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc1c1000. Read at address 0x00600018 (0xffffbc1c1018): 0x00000000 Write at address 0x00600018 (0xffffbc1c1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa5042000. Read at address 0x00600018 (0xffffa5042018): 0x00000000 Write at address 0x00600018 (0xffffa5042018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafaf4000. Read at address 0x00600018 (0xffffafaf4018): 0x00000000 Write at address 0x00600018 (0xffffafaf4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf21f000. Read at address 0x00600018 (0xffffaf21f018): 0x00000000 Write at address 0x00600018 (0xffffaf21f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5533000. Read at address 0x00600018 (0xffffa5533018): 0x00000000 Write at address 0x00600018 (0xffffa5533018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa1cf3000. Read at address 0x00600018 (0xffffa1cf3018): 0x00000000 Write at address 0x00600018 (0xffffa1cf3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94b37000. Read at address 0x00600018 (0xffff94b37018): 0x00000000 Write at address 0x00600018 (0xffff94b37018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaf852000. Read at address 0x00600018 (0xffffaf852018): 0x00000000 Write at address 0x00600018 (0xffffaf852018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached ubi0:animations is mounted. mtd24 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9be22000. Read at address 0x00600018 (0xffff9be22018): 0x00000000 Write at address 0x00600018 (0xffff9be22018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f904000. Read at address 0x00600018 (0xffff9f904018): 0x00000000 Write at address 0x00600018 (0xffff9f904018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb74eb000. Read at address 0x00600018 (0xffffb74eb018): 0x00000000 Write at address 0x00600018 (0xffffb74eb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff81f6d000. Read at address 0x00600018 (0xffff81f6d018): 0x00000000 Write at address 0x00600018 (0xffff81f6d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 219 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4e90000. Read at address 0x00600018 (0xffffb4e90018): 0x00000000 Write at address 0x00600018 (0xffffb4e90018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb078e000. Read at address 0x00600018 (0xffffb078e018): 0x00000000 Write at address 0x00600018 (0xffffb078e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff905e1000. Read at address 0x00600018 (0xffff905e1018): 0x00000000 Write at address 0x00600018 (0xffff905e1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff99f93000. Read at address 0x00600018 (0xffff99f93018): 0x00000000 Write at address 0x00600018 (0xffff99f93018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaffd3000. Read at address 0x00600018 (0xffffaffd3018): 0x00000000 Write at address 0x00600018 (0xffffaffd3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbb324000. Read at address 0x00600018 (0xffffbb324018): 0x00000000 Write at address 0x00600018 (0xffffbb324018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba02b000. Read at address 0x00600018 (0xffffba02b018): 0x00000000 Write at address 0x00600018 (0xffffba02b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff907b4000. Read at address 0x00600018 (0xffff907b4018): 0x00000000 Write at address 0x00600018 (0xffff907b4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbb74c000. Read at address 0x00600018 (0xffffbb74c018): 0x00000000 Write at address 0x00600018 (0xffffbb74c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff926a2000. Read at address 0x00600018 (0xffff926a2018): 0x00000000 Write at address 0x00600018 (0xffff926a2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff885c6000. Read at address 0x00600018 (0xffff885c6018): 0x00000000 Write at address 0x00600018 (0xffff885c6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e53c000. Read at address 0x00600018 (0xffff9e53c018): 0x00000000 Write at address 0x00600018 (0xffff9e53c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa3adf000. Read at address 0x00600018 (0xffffa3adf018): 0x00000000 Write at address 0x00600018 (0xffffa3adf018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa6ff6000. Read at address 0x00600018 (0xffffa6ff6018): 0x00000000 Write at address 0x00600018 (0xffffa6ff6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e1b4000. Read at address 0x00600018 (0xffff8e1b4018): 0x00000000 Write at address 0x00600018 (0xffff8e1b4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa66e000. Read at address 0x00600018 (0xffffaa66e018): 0x00000000 Write at address 0x00600018 (0xffffaa66e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf3f9000. Read at address 0x00600018 (0xffffaf3f9018): 0x00000000 Write at address 0x00600018 (0xffffaf3f9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb305e000. Read at address 0x00600018 (0xffffb305e018): 0x00000000 Write at address 0x00600018 (0xffffb305e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff93307000. Read at address 0x00600018 (0xffff93307018): 0x00000000 Write at address 0x00600018 (0xffff93307018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4206000. Read at address 0x00600018 (0xffffa4206018): 0x00000000 Write at address 0x00600018 (0xffffa4206018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9049a000. Read at address 0x00600018 (0xffff9049a018): 0x00000000 Write at address 0x00600018 (0xffff9049a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba1ef000. Read at address 0x00600018 (0xffffba1ef018): 0x00000000 Write at address 0x00600018 (0xffffba1ef018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8c4ad000. Read at address 0x00600018 (0xffff8c4ad018): 0x00000000 Write at address 0x00600018 (0xffff8c4ad018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ce89000. Read at address 0x00600018 (0xffff9ce89018): 0x00000000 Write at address 0x00600018 (0xffff9ce89018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a491000. Read at address 0x00600018 (0xffff9a491018): 0x00000000 Write at address 0x00600018 (0xffff9a491018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2778000. Read at address 0x00600018 (0xffffa2778018): 0x00000000 Write at address 0x00600018 (0xffffa2778018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff835dd000. Read at address 0x00600018 (0xffff835dd018): 0x00000000 Write at address 0x00600018 (0xffff835dd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1b3b000. Read at address 0x00600018 (0xffffb1b3b018): 0x00000000 Write at address 0x00600018 (0xffffb1b3b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b95b000. Read at address 0x00600018 (0xffff8b95b018): 0x00000000 Write at address 0x00600018 (0xffff8b95b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0707000. Read at address 0x00600018 (0xffffa0707018): 0x00000000 Write at address 0x00600018 (0xffffa0707018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa06c2000. Read at address 0x00600018 (0xffffa06c2018): 0x00000000 Write at address 0x00600018 (0xffffa06c2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b9f2000. Read at address 0x00600018 (0xffff8b9f2018): 0x00000000 Write at address 0x00600018 (0xffff8b9f2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c6df000. Read at address 0x00600018 (0xffff9c6df018): 0x00000000 Write at address 0x00600018 (0xffff9c6df018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8afa6000. Read at address 0x00600018 (0xffff8afa6018): 0x00000000 Write at address 0x00600018 (0xffff8afa6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8fabd000. Read at address 0x00600018 (0xffff8fabd018): 0x00000000 Write at address 0x00600018 (0xffff8fabd018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8a40d000. Read at address 0x00600018 (0xffff8a40d018): 0x00000000 Write at address 0x00600018 (0xffff8a40d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2a65000. Read at address 0x00600018 (0xffffa2a65018): 0x00000000 Write at address 0x00600018 (0xffffa2a65018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb56d6000. Read at address 0x00600018 (0xffffb56d6018): 0x00000000 Write at address 0x00600018 (0xffffb56d6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb4a95000. Read at address 0x00600018 (0xffffb4a95018): 0x00000000 Write at address 0x00600018 (0xffffb4a95018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa865b000. Read at address 0x00600018 (0xffffa865b018): 0x00000000 Write at address 0x00600018 (0xffffa865b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa218a000. Read at address 0x00600018 (0xffffa218a018): 0x00000000 Write at address 0x00600018 (0xffffa218a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95703000. Read at address 0x00600018 (0xffff95703018): 0x00000000 Write at address 0x00600018 (0xffff95703018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81f66000. Read at address 0x00600018 (0xffff81f66018): 0x00000000 Write at address 0x00600018 (0xffff81f66018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99545000. Read at address 0x00600018 (0xffff99545018): 0x00000000 Write at address 0x00600018 (0xffff99545018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99c9d000. Read at address 0x00600018 (0xffff99c9d018): 0x00000000 Write at address 0x00600018 (0xffff99c9d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi1:animations is mounted. ubi0:dml_code is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff933d5000. Read at address 0x00600018 (0xffff933d5018): 0x00000000 Write at address 0x00600018 (0xffff933d5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93763000. Read at address 0x00600018 (0xffff93763018): 0x00000000 Write at address 0x00600018 (0xffff93763018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8c452000. Read at address 0x00600018 (0xffff8c452018): 0x00000000 Write at address 0x00600018 (0xffff8c452018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8b32a000. Read at address 0x00600018 (0xffff8b32a018): 0x00000000 Write at address 0x00600018 (0xffff8b32a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97e84000. Read at address 0x00600018 (0xffff97e84018): 0x00000000 Write at address 0x00600018 (0xffff97e84018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffae60a000. Read at address 0x00600018 (0xffffae60a018): 0x00000000 Write at address 0x00600018 (0xffffae60a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85c59000. Read at address 0x00600018 (0xffff85c59018): 0x00000000 Write at address 0x00600018 (0xffff85c59018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9929000. Read at address 0x00600018 (0xffffa9929018): 0x00000000 Write at address 0x00600018 (0xffffa9929018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffba8ef000. Read at address 0x00600018 (0xffffba8ef018): 0x00000000 Write at address 0x00600018 (0xffffba8ef018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9e7d000. Read at address 0x00600018 (0xffffa9e7d018): 0x00000000 Write at address 0x00600018 (0xffffa9e7d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8f7c3000. Read at address 0x00600018 (0xffff8f7c3018): 0x00000000 Write at address 0x00600018 (0xffff8f7c3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8400b000. Read at address 0x00600018 (0xffff8400b018): 0x00000000 Write at address 0x00600018 (0xffff8400b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ca1a000. Read at address 0x00600018 (0xffff9ca1a018): 0x00000000 Write at address 0x00600018 (0xffff9ca1a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff83621000. Read at address 0x00600018 (0xffff83621018): 0x00000000 Write at address 0x00600018 (0xffff83621018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffae71f000. Read at address 0x00600018 (0xffffae71f018): 0x00000000 Write at address 0x00600018 (0xffffae71f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96da5000. Read at address 0x00600018 (0xffff96da5018): 0x00000000 Write at address 0x00600018 (0xffff96da5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89acd000. Read at address 0x00600018 (0xffff89acd018): 0x00000000 Write at address 0x00600018 (0xffff89acd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb18d3000. Read at address 0x00600018 (0xffffb18d3018): 0x00000000 Write at address 0x00600018 (0xffffb18d3018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85370000. Read at address 0x00600018 (0xffff85370018): 0x00000000 Write at address 0x00600018 (0xffff85370018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff860db000. Read at address 0x00600018 (0xffff860db018): 0x00000000 Write at address 0x00600018 (0xffff860db018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa74ac000. Read at address 0x00600018 (0xffffa74ac018): 0x00000000 Write at address 0x00600018 (0xffffa74ac018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac536000. Read at address 0x00600018 (0xffffac536018): 0x00000000 Write at address 0x00600018 (0xffffac536018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb3e65000. Read at address 0x00600018 (0xffffb3e65018): 0x00000000 Write at address 0x00600018 (0xffffb3e65018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa107e000. Read at address 0x00600018 (0xffffa107e018): 0x00000000 Write at address 0x00600018 (0xffffa107e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82c6d000. Read at address 0x00600018 (0xffff82c6d018): 0x00000000 Write at address 0x00600018 (0xffff82c6d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff898df000. Read at address 0x00600018 (0xffff898df018): 0x00000000 Write at address 0x00600018 (0xffff898df018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f375000. Read at address 0x00600018 (0xffff9f375018): 0x00000000 Write at address 0x00600018 (0xffff9f375018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb09de000. Read at address 0x00600018 (0xffffb09de018): 0x00000000 Write at address 0x00600018 (0xffffb09de018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e7a6000. Read at address 0x00600018 (0xffff8e7a6018): 0x00000000 Write at address 0x00600018 (0xffff8e7a6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff93c39000. Read at address 0x00600018 (0xffff93c39018): 0x00000000 Write at address 0x00600018 (0xffff93c39018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0ddf000. Read at address 0x00600018 (0xffffb0ddf018): 0x00000000 Write at address 0x00600018 (0xffffb0ddf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1455000. Read at address 0x00600018 (0xffffa1455018): 0x00000000 Write at address 0x00600018 (0xffffa1455018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa73f3000. Read at address 0x00600018 (0xffffa73f3018): 0x00000000 Write at address 0x00600018 (0xffffa73f3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd3f0000. Read at address 0x00600018 (0xffffbd3f0018): 0x00000000 Write at address 0x00600018 (0xffffbd3f0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffacf45000. Read at address 0x00600018 (0xffffacf45018): 0x00000000 Write at address 0x00600018 (0xffffacf45018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9bb5d000. Read at address 0x00600018 (0xffff9bb5d018): 0x00000000 Write at address 0x00600018 (0xffff9bb5d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffae277000. Read at address 0x00600018 (0xffffae277018): 0x00000000 Write at address 0x00600018 (0xffffae277018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff83f52000. Read at address 0x00600018 (0xffff83f52018): 0x00000000 Write at address 0x00600018 (0xffff83f52018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafdde000. Read at address 0x00600018 (0xffffafdde018): 0x00000000 Write at address 0x00600018 (0xffffafdde018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95c11000. Read at address 0x00600018 (0xffff95c11018): 0x00000000 Write at address 0x00600018 (0xffff95c11018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffab0df000. Read at address 0x00600018 (0xffffab0df018): 0x00000000 Write at address 0x00600018 (0xffffab0df018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8491a000. Read at address 0x00600018 (0xffff8491a018): 0x00000000 Write at address 0x00600018 (0xffff8491a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff837bf000. Read at address 0x00600018 (0xffff837bf018): 0x00000000 Write at address 0x00600018 (0xffff837bf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa30c3000. Read at address 0x00600018 (0xffffa30c3018): 0x00000000 Write at address 0x00600018 (0xffffa30c3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa5df9000. Read at address 0x00600018 (0xffffa5df9018): 0x00000000 Write at address 0x00600018 (0xffffa5df9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbf2ab000. Read at address 0x00600018 (0xffffbf2ab018): 0x00000000 Write at address 0x00600018 (0xffffbf2ab018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb231d000. Read at address 0x00600018 (0xffffb231d018): 0x00000000 Write at address 0x00600018 (0xffffb231d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4743000. Read at address 0x00600018 (0xffffa4743018): 0x00000000 Write at address 0x00600018 (0xffffa4743018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6a6c000. Read at address 0x00600018 (0xffffa6a6c018): 0x00000000 Write at address 0x00600018 (0xffffa6a6c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff839f3000. Read at address 0x00600018 (0xffff839f3018): 0x00000000 Write at address 0x00600018 (0xffff839f3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b845000. Read at address 0x00600018 (0xffff8b845018): 0x00000000 Write at address 0x00600018 (0xffff8b845018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa7014000. Read at address 0x00600018 (0xffffa7014018): 0x00000000 Write at address 0x00600018 (0xffffa7014018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba8a8000. Read at address 0x00600018 (0xffffba8a8018): 0x00000000 Write at address 0x00600018 (0xffffba8a8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac961000. Read at address 0x00600018 (0xffffac961018): 0x00000000 Write at address 0x00600018 (0xffffac961018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b710000. Read at address 0x00600018 (0xffff9b710018): 0x00000000 Write at address 0x00600018 (0xffff9b710018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9eef5000. Read at address 0x00600018 (0xffff9eef5018): 0x00000000 Write at address 0x00600018 (0xffff9eef5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9b054000. Read at address 0x00600018 (0xffff9b054018): 0x00000000 Write at address 0x00600018 (0xffff9b054018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8155d000. Read at address 0x00600018 (0xffff8155d018): 0x00000000 Write at address 0x00600018 (0xffff8155d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8980a000. Read at address 0x00600018 (0xffff8980a018): 0x00000000 Write at address 0x00600018 (0xffff8980a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb707b000. Read at address 0x00600018 (0xffffb707b018): 0x00000000 Write at address 0x00600018 (0xffffb707b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff94949000. Read at address 0x00600018 (0xffff94949018): 0x00000000 Write at address 0x00600018 (0xffff94949018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out rpmsg_char_open: _rpmsg_char_find_ctrldev failed Ipc_InitDriver: rpmsg_char_open failed, retrying... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8c2a6000. Read at address 0x00600018 (0xffff8c2a6018): 0x00000000 Write at address 0x00600018 (0xffff8c2a6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8db8000. Read at address 0x00600018 (0xffffa8db8018): 0x00000000 Write at address 0x00600018 (0xffffa8db8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99a19000. Read at address 0x00600018 (0xffff99a19018): 0x00000000 Write at address 0x00600018 (0xffff99a19018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b1ac000. Read at address 0x00600018 (0xffff8b1ac018): 0x00000000 Write at address 0x00600018 (0xffff8b1ac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb13ca000. Read at address 0x00600018 (0xffffb13ca018): 0x00000000 Write at address 0x00600018 (0xffffb13ca018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8d00000. Read at address 0x00600018 (0xffffa8d00018): 0x00000000 Write at address 0x00600018 (0xffffa8d00018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbac49000. Read at address 0x00600018 (0xffffbac49018): 0x00000000 Write at address 0x00600018 (0xffffbac49018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9cfcf000. Read at address 0x00600018 (0xffff9cfcf018): 0x00000000 Write at address 0x00600018 (0xffff9cfcf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91e56000. Read at address 0x00600018 (0xffff91e56018): 0x00000000 Write at address 0x00600018 (0xffff91e56018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e4e3000. Read at address 0x00600018 (0xffff8e4e3018): 0x00000000 Write at address 0x00600018 (0xffff8e4e3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b851000. Read at address 0x00600018 (0xffff9b851018): 0x00000000 Write at address 0x00600018 (0xffff9b851018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffabb34000. Read at address 0x00600018 (0xffffabb34018): 0x00000000 Write at address 0x00600018 (0xffffabb34018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffadd68000. Read at address 0x00600018 (0xffffadd68018): 0x00000000 Write at address 0x00600018 (0xffffadd68018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab37d000. Read at address 0x00600018 (0xffffab37d018): 0x00000000 Write at address 0x00600018 (0xffffab37d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa145c000. Read at address 0x00600018 (0xffffa145c018): 0x00000000 Write at address 0x00600018 (0xffffa145c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8de64000. Read at address 0x00600018 (0xffff8de64018): 0x00000000 Write at address 0x00600018 (0xffff8de64018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c4c8000. Read at address 0x00600018 (0xffff9c4c8018): 0x00000000 Write at address 0x00600018 (0xffff9c4c8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa8b3000. Read at address 0x00600018 (0xffffaa8b3018): 0x00000000 Write at address 0x00600018 (0xffffaa8b3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa7c3d000. Read at address 0x00600018 (0xffffa7c3d018): 0x00000000 Write at address 0x00600018 (0xffffa7c3d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8fbf2000. Read at address 0x00600018 (0xffff8fbf2018): 0x00000000 Write at address 0x00600018 (0xffff8fbf2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb3b99000. Read at address 0x00600018 (0xffffb3b99018): 0x00000000 Write at address 0x00600018 (0xffffb3b99018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff818fd000. Read at address 0x00600018 (0xffff818fd018): 0x00000000 Write at address 0x00600018 (0xffff818fd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb1598000. Read at address 0x00600018 (0xffffb1598018): 0x00000000 Write at address 0x00600018 (0xffffb1598018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ec7a000. Read at address 0x00600018 (0xffff8ec7a018): 0x00000000 Write at address 0x00600018 (0xffff8ec7a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff880ad000. Read at address 0x00600018 (0xffff880ad018): 0x00000000 Write at address 0x00600018 (0xffff880ad018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff942ad000. Read at address 0x00600018 (0xffff942ad018): 0x00000000 Write at address 0x00600018 (0xffff942ad018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbd155000. Read at address 0x00600018 (0xffffbd155018): 0x00000000 Write at address 0x00600018 (0xffffbd155018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff97a77000. Read at address 0x00600018 (0xffff97a77018): 0x00000000 Write at address 0x00600018 (0xffff97a77018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbceca000. Read at address 0x00600018 (0xffffbceca018): 0x00000000 Write at address 0x00600018 (0xffffbceca018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb022c000. Read at address 0x00600018 (0xffffb022c018): 0x00000000 Write at address 0x00600018 (0xffffb022c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff831c5000. Read at address 0x00600018 (0xffff831c5018): 0x00000000 Write at address 0x00600018 (0xffff831c5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86ff1000. Read at address 0x00600018 (0xffff86ff1018): 0x00000000 Write at address 0x00600018 (0xffff86ff1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffab967000. Read at address 0x00600018 (0xffffab967018): 0x00000000 Write at address 0x00600018 (0xffffab967018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4854000. Read at address 0x00600018 (0xffffb4854018): 0x00000000 Write at address 0x00600018 (0xffffb4854018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff80364000. Read at address 0x00600018 (0xffff80364018): 0x00000000 Write at address 0x00600018 (0xffff80364018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9776b000. Read at address 0x00600018 (0xffff9776b018): 0x00000000 Write at address 0x00600018 (0xffff9776b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffaef99000. Read at address 0x00600018 (0xffffaef99018): 0x00000000 Write at address 0x00600018 (0xffffaef99018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb765b000. Read at address 0x00600018 (0xffffb765b018): 0x00000000 Write at address 0x00600018 (0xffffb765b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9183c000. Read at address 0x00600018 (0xffff9183c018): 0x00000000 Write at address 0x00600018 (0xffff9183c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6d82000. Read at address 0x00600018 (0xffffb6d82018): 0x00000000 Write at address 0x00600018 (0xffffb6d82018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa57cc000. Read at address 0x00600018 (0xffffa57cc018): 0x00000000 Write at address 0x00600018 (0xffffa57cc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac350000. Read at address 0x00600018 (0xffffac350018): 0x00000000 Write at address 0x00600018 (0xffffac350018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8275c000. Read at address 0x00600018 (0xffff8275c018): 0x00000000 Write at address 0x00600018 (0xffff8275c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaccf7000. Read at address 0x00600018 (0xffffaccf7018): 0x00000000 Write at address 0x00600018 (0xffffaccf7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb7629000. Read at address 0x00600018 (0xffffb7629018): 0x00000000 Write at address 0x00600018 (0xffffb7629018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a414000. Read at address 0x00600018 (0xffff8a414018): 0x00000000 Write at address 0x00600018 (0xffff8a414018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82245000. Read at address 0x00600018 (0xffff82245018): 0x00000000 Write at address 0x00600018 (0xffff82245018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb29ca000. Read at address 0x00600018 (0xffffb29ca018): 0x00000000 Write at address 0x00600018 (0xffffb29ca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8dd5d000. Read at address 0x00600018 (0xffff8dd5d018): 0x00000000 Write at address 0x00600018 (0xffff8dd5d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafd29000. Read at address 0x00600018 (0xffffafd29018): 0x00000000 Write at address 0x00600018 (0xffffafd29018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7f804000. Read at address 0x00600018 (0xffff7f804018): 0x00000000 Write at address 0x00600018 (0xffff7f804018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa767d000. Read at address 0x00600018 (0xffffa767d018): 0x00000000 Write at address 0x00600018 (0xffffa767d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff947e9000. Read at address 0x00600018 (0xffff947e9018): 0x00000000 Write at address 0x00600018 (0xffff947e9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb122a000. Read at address 0x00600018 (0xffffb122a018): 0x00000000 Write at address 0x00600018 (0xffffb122a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85d8e000. Read at address 0x00600018 (0xffff85d8e018): 0x00000000 Write at address 0x00600018 (0xffff85d8e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83061000. Read at address 0x00600018 (0xffff83061018): 0x00000000 Write at address 0x00600018 (0xffff83061018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96267000. Read at address 0x00600018 (0xffff96267018): 0x00000000 Write at address 0x00600018 (0xffff96267018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9e8c3000. Read at address 0x00600018 (0xffff9e8c3018): 0x00000000 Write at address 0x00600018 (0xffff9e8c3018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8ef4f000. Read at address 0x00600018 (0xffff8ef4f018): 0x00000000 Write at address 0x00600018 (0xffff8ef4f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c506000. Read at address 0x00600018 (0xffff9c506018): 0x00000000 Write at address 0x00600018 (0xffff9c506018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa42ac000. Read at address 0x00600018 (0xffffa42ac018): 0x00000000 Write at address 0x00600018 (0xffffa42ac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8f7e5000. Read at address 0x00600018 (0xffff8f7e5018): 0x00000000 Write at address 0x00600018 (0xffff8f7e5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b8b8000. Read at address 0x00600018 (0xffff9b8b8018): 0x00000000 Write at address 0x00600018 (0xffff9b8b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb858c000. Read at address 0x00600018 (0xffffb858c018): 0x00000000 Write at address 0x00600018 (0xffffb858c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8bbe3000. Read at address 0x00600018 (0xffff8bbe3018): 0x00000000 Write at address 0x00600018 (0xffff8bbe3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff91957000. Read at address 0x00600018 (0xffff91957018): 0x00000000 Write at address 0x00600018 (0xffff91957018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc5c7000. Read at address 0x00600018 (0xffffbc5c7018): 0x00000000 Write at address 0x00600018 (0xffffbc5c7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae0ee000. Read at address 0x00600018 (0xffffae0ee018): 0x00000000 Write at address 0x00600018 (0xffffae0ee018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff7f7ab000. Read at address 0x00600018 (0xffff7f7ab018): 0x00000000 Write at address 0x00600018 (0xffff7f7ab018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8020000. Read at address 0x00600018 (0xffffb8020018): 0x00000000 Write at address 0x00600018 (0xffffb8020018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b1bc000. Read at address 0x00600018 (0xffff9b1bc018): 0x00000000 Write at address 0x00600018 (0xffff9b1bc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8cc70000. Read at address 0x00600018 (0xffff8cc70018): 0x00000000 Write at address 0x00600018 (0xffff8cc70018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa74a6000. Read at address 0x00600018 (0xffffa74a6018): 0x00000000 Write at address 0x00600018 (0xffffa74a6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84334000. Read at address 0x00600018 (0xffff84334018): 0x00000000 Write at address 0x00600018 (0xffff84334018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ae32000. Read at address 0x00600018 (0xffff8ae32018): 0x00000000 Write at address 0x00600018 (0xffff8ae32018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96ad9000. Read at address 0x00600018 (0xffff96ad9018): 0x00000000 Write at address 0x00600018 (0xffff96ad9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff84431000. Read at address 0x00600018 (0xffff84431018): 0x00000000 Write at address 0x00600018 (0xffff84431018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f40e000. Read at address 0x00600018 (0xffff8f40e018): 0x00000000 Write at address 0x00600018 (0xffff8f40e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff827af000. Read at address 0x00600018 (0xffff827af018): 0x00000000 Write at address 0x00600018 (0xffff827af018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb3148000. Read at address 0x00600018 (0xffffb3148018): 0x00000000 Write at address 0x00600018 (0xffffb3148018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82405000. Read at address 0x00600018 (0xffff82405018): 0x00000000 Write at address 0x00600018 (0xffff82405018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff915d6000. Read at address 0x00600018 (0xffff915d6018): 0x00000000 Write at address 0x00600018 (0xffff915d6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa4be7000. Read at address 0x00600018 (0xffffa4be7018): 0x00000000 Write at address 0x00600018 (0xffffa4be7018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff88f92000. Read at address 0x00600018 (0xffff88f92018): 0x00000000 Write at address 0x00600018 (0xffff88f92018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6d0f000. Read at address 0x00600018 (0xffffb6d0f018): 0x00000000 Write at address 0x00600018 (0xffffb6d0f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4b31000. Read at address 0x00600018 (0xffffa4b31018): 0x00000000 Write at address 0x00600018 (0xffffa4b31018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a46b000. Read at address 0x00600018 (0xffff8a46b018): 0x00000000 Write at address 0x00600018 (0xffff8a46b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff97022000. Read at address 0x00600018 (0xffff97022018): 0x00000000 Write at address 0x00600018 (0xffff97022018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5555000. Read at address 0x00600018 (0xffffa5555018): 0x00000000 Write at address 0x00600018 (0xffffa5555018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94c08000. Read at address 0x00600018 (0xffff94c08018): 0x00000000 Write at address 0x00600018 (0xffff94c08018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2ae2000. Read at address 0x00600018 (0xffffa2ae2018): 0x00000000 Write at address 0x00600018 (0xffffa2ae2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa11a0000. Read at address 0x00600018 (0xffffa11a0018): 0x00000000 Write at address 0x00600018 (0xffffa11a0018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff84a1b000. Read at address 0x00600018 (0xffff84a1b018): 0x00000000 Write at address 0x00600018 (0xffff84a1b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbec89000. Read at address 0x00600018 (0xffffbec89018): 0x00000000 Write at address 0x00600018 (0xffffbec89018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91c5d000. Read at address 0x00600018 (0xffff91c5d018): 0x00000000 Write at address 0x00600018 (0xffff91c5d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffaeed6000. Read at address 0x00600018 (0xffffaeed6018): 0x00000000 Write at address 0x00600018 (0xffffaeed6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff85ef2000. Read at address 0x00600018 (0xffff85ef2018): 0x00000000 Write at address 0x00600018 (0xffff85ef2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 net.ipv6.conf.eth0.dad_transmits = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad6e6000. Read at address 0x00600018 (0xffffad6e6018): 0x00000000 Write at address 0x00600018 (0xffffad6e6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff7fbc5000. Read at address 0x00600018 (0xffff7fbc5018): 0x00000000 Write at address 0x00600018 (0xffff7fbc5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5161000. Read at address 0x00600018 (0xffffa5161018): 0x00000000 Write at address 0x00600018 (0xffffa5161018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9ddb1000. Read at address 0x00600018 (0xffff9ddb1018): 0x00000000 Write at address 0x00600018 (0xffff9ddb1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9eba5000. Read at address 0x00600018 (0xffff9eba5018): 0x00000000 Write at address 0x00600018 (0xffff9eba5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad4d2000. Read at address 0x00600018 (0xffffad4d2018): 0x00000000 Write at address 0x00600018 (0xffffad4d2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffba95f000. Read at address 0x00600018 (0xffffba95f018): 0x00000000 Write at address 0x00600018 (0xffffba95f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8a459000. Read at address 0x00600018 (0xffff8a459018): 0x00000000 Write at address 0x00600018 (0xffff8a459018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9c691000. Read at address 0x00600018 (0xffff9c691018): 0x00000000 Write at address 0x00600018 (0xffff9c691018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9181000. Read at address 0x00600018 (0xffffb9181018): 0x00000000 Write at address 0x00600018 (0xffffb9181018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c8dc000. Read at address 0x00600018 (0xffff9c8dc018): 0x00000000 Write at address 0x00600018 (0xffff9c8dc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7f5f000. Read at address 0x00600018 (0xffffb7f5f018): 0x00000000 Write at address 0x00600018 (0xffffb7f5f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d760000. Read at address 0x00600018 (0xffff8d760018): 0x00000000 Write at address 0x00600018 (0xffff8d760018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1553000. Read at address 0x00600018 (0xffffa1553018): 0x00000000 Write at address 0x00600018 (0xffffa1553018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff85afe000. Read at address 0x00600018 (0xffff85afe018): 0x00000000 Write at address 0x00600018 (0xffff85afe018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb923c000. Read at address 0x00600018 (0xffffb923c018): 0x00000000 Write at address 0x00600018 (0xffffb923c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84ba8000. Read at address 0x00600018 (0xffff84ba8018): 0x00000000 Write at address 0x00600018 (0xffff84ba8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8a311000. Read at address 0x00600018 (0xffff8a311018): 0x00000000 Write at address 0x00600018 (0xffff8a311018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83995000. Read at address 0x00600018 (0xffff83995018): 0x00000000 Write at address 0x00600018 (0xffff83995018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8968b000. Read at address 0x00600018 (0xffff8968b018): 0x00000000 Write at address 0x00600018 (0xffff8968b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a426000. Read at address 0x00600018 (0xffff8a426018): 0x00000000 Write at address 0x00600018 (0xffff8a426018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7f96a000. Read at address 0x00600018 (0xffff7f96a018): 0x00000000 Write at address 0x00600018 (0xffff7f96a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82a46000. Read at address 0x00600018 (0xffff82a46018): 0x00000000 Write at address 0x00600018 (0xffff82a46018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaadf4000. Read at address 0x00600018 (0xffffaadf4018): 0x00000000 Write at address 0x00600018 (0xffffaadf4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbba1000. Read at address 0x00600018 (0xffffbbba1018): 0x00000000 Write at address 0x00600018 (0xffffbbba1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e323000. Read at address 0x00600018 (0xffff9e323018): 0x00000000 Write at address 0x00600018 (0xffff9e323018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87313000. Read at address 0x00600018 (0xffff87313018): 0x00000000 Write at address 0x00600018 (0xffff87313018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbdb76000. Read at address 0x00600018 (0xffffbdb76018): 0x00000000 Write at address 0x00600018 (0xffffbdb76018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2112000. Read at address 0x00600018 (0xffffb2112018): 0x00000000 Write at address 0x00600018 (0xffffb2112018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff817f2000. Read at address 0x00600018 (0xffff817f2018): 0x00000000 Write at address 0x00600018 (0xffff817f2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c695000. Read at address 0x00600018 (0xffff8c695018): 0x00000000 Write at address 0x00600018 (0xffff8c695018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a486000. Read at address 0x00600018 (0xffff8a486018): 0x00000000 Write at address 0x00600018 (0xffff8a486018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9148000. Read at address 0x00600018 (0xffffa9148018): 0x00000000 Write at address 0x00600018 (0xffffa9148018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8507000. Read at address 0x00600018 (0xffffb8507018): 0x00000000 Write at address 0x00600018 (0xffffb8507018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff939f0000. Read at address 0x00600018 (0xffff939f0018): 0x00000000 Write at address 0x00600018 (0xffff939f0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb530e000. Read at address 0x00600018 (0xffffb530e018): 0x00000000 Write at address 0x00600018 (0xffffb530e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c868000. Read at address 0x00600018 (0xffff8c868018): 0x00000000 Write at address 0x00600018 (0xffff8c868018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb76ec000. Read at address 0x00600018 (0xffffb76ec018): 0x00000000 Write at address 0x00600018 (0xffffb76ec018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98898000. Read at address 0x00600018 (0xffff98898018): 0x00000000 Write at address 0x00600018 (0xffff98898018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95bd6000. Read at address 0x00600018 (0xffff95bd6018): 0x00000000 Write at address 0x00600018 (0xffff95bd6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa3fc2000. Read at address 0x00600018 (0xffffa3fc2018): 0x00000000 Write at address 0x00600018 (0xffffa3fc2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9025f000. Read at address 0x00600018 (0xffff9025f018): 0x00000000 Write at address 0x00600018 (0xffff9025f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6d2c000. Read at address 0x00600018 (0xffffa6d2c018): 0x00000000 Write at address 0x00600018 (0xffffa6d2c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb89e000. Read at address 0x00600018 (0xffffbb89e018): 0x00000000 Write at address 0x00600018 (0xffffbb89e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba74b000. Read at address 0x00600018 (0xffffba74b018): 0x00000000 Write at address 0x00600018 (0xffffba74b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc279000. Read at address 0x00600018 (0xffffbc279018): 0x00000000 Write at address 0x00600018 (0xffffbc279018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb7db3000. Read at address 0x00600018 (0xffffb7db3018): 0x00000000 Write at address 0x00600018 (0xffffb7db3018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b4f1000. Read at address 0x00600018 (0xffff9b4f1018): 0x00000000 Write at address 0x00600018 (0xffff9b4f1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8a8b8000. Read at address 0x00600018 (0xffff8a8b8018): 0x00000000 Write at address 0x00600018 (0xffff8a8b8018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8c305000. Read at address 0x00600018 (0xffff8c305018): 0x00000000 Write at address 0x00600018 (0xffff8c305018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9432a000. Read at address 0x00600018 (0xffff9432a018): 0x00000000 Write at address 0x00600018 (0xffff9432a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89b27000. Read at address 0x00600018 (0xffff89b27018): 0x00000000 Write at address 0x00600018 (0xffff89b27018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff903d7000. Read at address 0x00600018 (0xffff903d7018): 0x00000000 Write at address 0x00600018 (0xffff903d7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9ca23000. Read at address 0x00600018 (0xffff9ca23018): 0x00000000 Write at address 0x00600018 (0xffff9ca23018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb98c0000. Read at address 0x00600018 (0xffffb98c0018): 0x00000000 Write at address 0x00600018 (0xffffb98c0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb28a9000. Read at address 0x00600018 (0xffffb28a9018): 0x00000000 Write at address 0x00600018 (0xffffb28a9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa6ec8000. Read at address 0x00600018 (0xffffa6ec8018): 0x00000000 Write at address 0x00600018 (0xffffa6ec8018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b758000. Read at address 0x00600018 (0xffff9b758018): 0x00000000 Write at address 0x00600018 (0xffff9b758018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8b18000. Read at address 0x00600018 (0xffffa8b18018): 0x00000000 Write at address 0x00600018 (0xffffa8b18018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff90d44000. Read at address 0x00600018 (0xffff90d44018): 0x00000000 Write at address 0x00600018 (0xffff90d44018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c735000. Read at address 0x00600018 (0xffff9c735018): 0x00000000 Write at address 0x00600018 (0xffff9c735018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaf888000. Read at address 0x00600018 (0xffffaf888018): 0x00000000 Write at address 0x00600018 (0xffffaf888018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5d4a000. Read at address 0x00600018 (0xffffb5d4a018): 0x00000000 Write at address 0x00600018 (0xffffb5d4a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1ea2000. Read at address 0x00600018 (0xffffa1ea2018): 0x00000000 Write at address 0x00600018 (0xffffa1ea2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e036000. Read at address 0x00600018 (0xffff8e036018): 0x00000000 Write at address 0x00600018 (0xffff8e036018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbb84d000. Read at address 0x00600018 (0xffffbb84d018): 0x00000000 Write at address 0x00600018 (0xffffbb84d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3e7d000. Read at address 0x00600018 (0xffffa3e7d018): 0x00000000 Write at address 0x00600018 (0xffffa3e7d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 net.ipv6.conf.eth0.dad_transmits = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa22d6000. Read at address 0x00600018 (0xffffa22d6018): 0x00000000 Write at address 0x00600018 (0xffffa22d6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f702000. Read at address 0x00600018 (0xffff8f702018): 0x00000000 Write at address 0x00600018 (0xffff8f702018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9f2b000. Read at address 0x00600018 (0xffffb9f2b018): 0x00000000 Write at address 0x00600018 (0xffffb9f2b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc16b000. Read at address 0x00600018 (0xffffbc16b018): 0x00000000 Write at address 0x00600018 (0xffffbc16b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9813f000. Read at address 0x00600018 (0xffff9813f018): 0x00000000 Write at address 0x00600018 (0xffff9813f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9753a000. Read at address 0x00600018 (0xffff9753a018): 0x00000000 Write at address 0x00600018 (0xffff9753a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98e86000. Read at address 0x00600018 (0xffff98e86018): 0x00000000 Write at address 0x00600018 (0xffff98e86018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb091e000. Read at address 0x00600018 (0xffffb091e018): 0x00000000 Write at address 0x00600018 (0xffffb091e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa888a000. Read at address 0x00600018 (0xffffa888a018): 0x00000000 Write at address 0x00600018 (0xffffa888a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb98a000. Read at address 0x00600018 (0xffffbb98a018): 0x00000000 Write at address 0x00600018 (0xffffbb98a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4e86000. Read at address 0x00600018 (0xffffb4e86018): 0x00000000 Write at address 0x00600018 (0xffffb4e86018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8a40000. Read at address 0x00600018 (0xffffa8a40018): 0x00000000 Write at address 0x00600018 (0xffffa8a40018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa70a1000. Read at address 0x00600018 (0xffffa70a1018): 0x00000000 Write at address 0x00600018 (0xffffa70a1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbaa38000. Read at address 0x00600018 (0xffffbaa38018): 0x00000000 Write at address 0x00600018 (0xffffbaa38018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe201000. Read at address 0x00600018 (0xffffbe201018): 0x00000000 Write at address 0x00600018 (0xffffbe201018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7961000. Read at address 0x00600018 (0xffffa7961018): 0x00000000 Write at address 0x00600018 (0xffffa7961018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d2cb000. Read at address 0x00600018 (0xffff8d2cb018): 0x00000000 Write at address 0x00600018 (0xffff8d2cb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82087000. Read at address 0x00600018 (0xffff82087018): 0x00000000 Write at address 0x00600018 (0xffff82087018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fb9f000. Read at address 0x00600018 (0xffff8fb9f018): 0x00000000 Write at address 0x00600018 (0xffff8fb9f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5f54000. Read at address 0x00600018 (0xffffa5f54018): 0x00000000 Write at address 0x00600018 (0xffffa5f54018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4c22000. Read at address 0x00600018 (0xffffa4c22018): 0x00000000 Write at address 0x00600018 (0xffffa4c22018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff90616000. Read at address 0x00600018 (0xffff90616018): 0x00000000 Write at address 0x00600018 (0xffff90616018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa85dd000. Read at address 0x00600018 (0xffffa85dd018): 0x00000000 Write at address 0x00600018 (0xffffa85dd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3662000. Read at address 0x00600018 (0xffffb3662018): 0x00000000 Write at address 0x00600018 (0xffffb3662018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb99f2000. Read at address 0x00600018 (0xffffb99f2018): 0x00000000 Write at address 0x00600018 (0xffffb99f2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9f4ce000. Read at address 0x00600018 (0xffff9f4ce018): 0x00000000 Write at address 0x00600018 (0xffff9f4ce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff87683000. Read at address 0x00600018 (0xffff87683018): 0x00000000 Write at address 0x00600018 (0xffff87683018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1c50000. Read at address 0x00600018 (0xffffb1c50018): 0x00000000 Write at address 0x00600018 (0xffffb1c50018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff849c4000. Read at address 0x00600018 (0xffff849c4018): 0x00000000 Write at address 0x00600018 (0xffff849c4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d4d3000. Read at address 0x00600018 (0xffff8d4d3018): 0x00000000 Write at address 0x00600018 (0xffff8d4d3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8f0ed000. Read at address 0x00600018 (0xffff8f0ed018): 0x00000000 Write at address 0x00600018 (0xffff8f0ed018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8cf72000. Read at address 0x00600018 (0xffff8cf72018): 0x00000000 Write at address 0x00600018 (0xffff8cf72018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84bdb000. Read at address 0x00600018 (0xffff84bdb018): 0x00000000 Write at address 0x00600018 (0xffff84bdb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99a89000. Read at address 0x00600018 (0xffff99a89018): 0x00000000 Write at address 0x00600018 (0xffff99a89018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2acc000. Read at address 0x00600018 (0xffffb2acc018): 0x00000000 Write at address 0x00600018 (0xffffb2acc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3dd0000. Read at address 0x00600018 (0xffffa3dd0018): 0x00000000 Write at address 0x00600018 (0xffffa3dd0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff809dc000. Read at address 0x00600018 (0xffff809dc018): 0x00000000 Write at address 0x00600018 (0xffff809dc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa4dbf000. Read at address 0x00600018 (0xffffa4dbf018): 0x00000000 Write at address 0x00600018 (0xffffa4dbf018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85e9c000. Read at address 0x00600018 (0xffff85e9c018): 0x00000000 Write at address 0x00600018 (0xffff85e9c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0fec000. Read at address 0x00600018 (0xffffb0fec018): 0x00000000 Write at address 0x00600018 (0xffffb0fec018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbea2e000. Read at address 0x00600018 (0xffffbea2e018): 0x00000000 Write at address 0x00600018 (0xffffbea2e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffad733000. Read at address 0x00600018 (0xffffad733018): 0x00000000 Write at address 0x00600018 (0xffffad733018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8b60000. Read at address 0x00600018 (0xffffa8b60018): 0x00000000 Write at address 0x00600018 (0xffffa8b60018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb126d000. Read at address 0x00600018 (0xffffb126d018): 0x00000000 Write at address 0x00600018 (0xffffb126d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9fc33000. Read at address 0x00600018 (0xffff9fc33018): 0x00000000 Write at address 0x00600018 (0xffff9fc33018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbcf5a000. Read at address 0x00600018 (0xffffbcf5a018): 0x00000000 Write at address 0x00600018 (0xffffbcf5a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80b85000. Read at address 0x00600018 (0xffff80b85018): 0x00000000 Write at address 0x00600018 (0xffff80b85018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91975000. Read at address 0x00600018 (0xffff91975018): 0x00000000 Write at address 0x00600018 (0xffff91975018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff968a4000. Read at address 0x00600018 (0xffff968a4018): 0x00000000 Write at address 0x00600018 (0xffff968a4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d6cd000. Read at address 0x00600018 (0xffff8d6cd018): 0x00000000 Write at address 0x00600018 (0xffff8d6cd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff973e6000. Read at address 0x00600018 (0xffff973e6018): 0x00000000 Write at address 0x00600018 (0xffff973e6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbdf73000. Read at address 0x00600018 (0xffffbdf73018): 0x00000000 Write at address 0x00600018 (0xffffbdf73018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac43d000. Read at address 0x00600018 (0xffffac43d018): 0x00000000 Write at address 0x00600018 (0xffffac43d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbdd7b000. Read at address 0x00600018 (0xffffbdd7b018): 0x00000000 Write at address 0x00600018 (0xffffbdd7b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff95bbe000. Read at address 0x00600018 (0xffff95bbe018): 0x00000000 Write at address 0x00600018 (0xffff95bbe018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0e1e000. Read at address 0x00600018 (0xffffb0e1e018): 0x00000000 Write at address 0x00600018 (0xffffb0e1e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87c44000. Read at address 0x00600018 (0xffff87c44018): 0x00000000 Write at address 0x00600018 (0xffff87c44018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fa8b000. Read at address 0x00600018 (0xffff7fa8b018): 0x00000000 Write at address 0x00600018 (0xffff7fa8b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffaaa3e000. Read at address 0x00600018 (0xffffaaa3e018): 0x00000000 Write at address 0x00600018 (0xffffaaa3e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 net.ipv6.conf.all.disable_ipv6 = 0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb176f000. Read at address 0x00600018 (0xffffb176f018): 0x00000000 Write at address 0x00600018 (0xffffb176f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff819db000. Read at address 0x00600018 (0xffff819db018): 0x00000000 Write at address 0x00600018 (0xffff819db018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbf595000. Read at address 0x00600018 (0xffffbf595018): 0x00000000 Write at address 0x00600018 (0xffffbf595018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b071000. Read at address 0x00600018 (0xffff9b071018): 0x00000000 Write at address 0x00600018 (0xffff9b071018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff85726000. Read at address 0x00600018 (0xffff85726018): 0x00000000 Write at address 0x00600018 (0xffff85726018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaeedf000. Read at address 0x00600018 (0xffffaeedf018): 0x00000000 Write at address 0x00600018 (0xffffaeedf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8920b000. Read at address 0x00600018 (0xffff8920b018): 0x00000000 Write at address 0x00600018 (0xffff8920b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d9f5000. Read at address 0x00600018 (0xffff8d9f5018): 0x00000000 Write at address 0x00600018 (0xffff8d9f5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa2a3d000. Read at address 0x00600018 (0xffffa2a3d018): 0x00000000 Write at address 0x00600018 (0xffffa2a3d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa06f3000. Read at address 0x00600018 (0xffffa06f3018): 0x00000000 Write at address 0x00600018 (0xffffa06f3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84e5d000. Read at address 0x00600018 (0xffff84e5d018): 0x00000000 Write at address 0x00600018 (0xffff84e5d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff924ea000. Read at address 0x00600018 (0xffff924ea018): 0x00000000 Write at address 0x00600018 (0xffff924ea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbbe33000. Read at address 0x00600018 (0xffffbbe33018): 0x00000000 Write at address 0x00600018 (0xffffbbe33018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9128d000. Read at address 0x00600018 (0xffff9128d018): 0x00000000 Write at address 0x00600018 (0xffff9128d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b2f9000. Read at address 0x00600018 (0xffff8b2f9018): 0x00000000 Write at address 0x00600018 (0xffff8b2f9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8c216000. Read at address 0x00600018 (0xffff8c216018): 0x00000000 Write at address 0x00600018 (0xffff8c216018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff978d9000. Read at address 0x00600018 (0xffff978d9018): 0x00000000 Write at address 0x00600018 (0xffff978d9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb071e000. Read at address 0x00600018 (0xffffb071e018): 0x00000000 Write at address 0x00600018 (0xffffb071e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9f869000. Read at address 0x00600018 (0xffff9f869018): 0x00000000 Write at address 0x00600018 (0xffff9f869018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff930bc000. Read at address 0x00600018 (0xffff930bc018): 0x00000000 Write at address 0x00600018 (0xffff930bc018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81b01000. Read at address 0x00600018 (0xffff81b01018): 0x00000000 Write at address 0x00600018 (0xffff81b01018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadd01000. Read at address 0x00600018 (0xffffadd01018): 0x00000000 Write at address 0x00600018 (0xffffadd01018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbcdff000. Read at address 0x00600018 (0xffffbcdff018): 0x00000000 Write at address 0x00600018 (0xffffbcdff018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80d2d000. Read at address 0x00600018 (0xffff80d2d018): 0x00000000 Write at address 0x00600018 (0xffff80d2d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2f2b000. Read at address 0x00600018 (0xffffb2f2b018): 0x00000000 Write at address 0x00600018 (0xffffb2f2b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb59f6000. Read at address 0x00600018 (0xffffb59f6018): 0x00000000 Write at address 0x00600018 (0xffffb59f6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff833ef000. Read at address 0x00600018 (0xffff833ef018): 0x00000000 Write at address 0x00600018 (0xffff833ef018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8161d000. Read at address 0x00600018 (0xffff8161d018): 0x00000000 Write at address 0x00600018 (0xffff8161d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa997d000. Read at address 0x00600018 (0xffffa997d018): 0x00000000 Write at address 0x00600018 (0xffffa997d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d85d000. Read at address 0x00600018 (0xffff9d85d018): 0x00000000 Write at address 0x00600018 (0xffff9d85d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa646f000. Read at address 0x00600018 (0xffffa646f018): 0x00000000 Write at address 0x00600018 (0xffffa646f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa0313000. Read at address 0x00600018 (0xffffa0313018): 0x00000000 Write at address 0x00600018 (0xffffa0313018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b256000. Read at address 0x00600018 (0xffff9b256018): 0x00000000 Write at address 0x00600018 (0xffff9b256018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb9804000. Read at address 0x00600018 (0xffffb9804018): 0x00000000 Write at address 0x00600018 (0xffffb9804018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb1d9e000. Read at address 0x00600018 (0xffffb1d9e018): 0x00000000 Write at address 0x00600018 (0xffffb1d9e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9c4b1000. Read at address 0x00600018 (0xffff9c4b1018): 0x00000000 Write at address 0x00600018 (0xffff9c4b1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83a1d000. Read at address 0x00600018 (0xffff83a1d018): 0x00000000 Write at address 0x00600018 (0xffff83a1d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ddd7000. Read at address 0x00600018 (0xffff8ddd7018): 0x00000000 Write at address 0x00600018 (0xffff8ddd7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff887d5000. Read at address 0x00600018 (0xffff887d5018): 0x00000000 Write at address 0x00600018 (0xffff887d5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffab962000. Read at address 0x00600018 (0xffffab962018): 0x00000000 Write at address 0x00600018 (0xffffab962018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91a07000. Read at address 0x00600018 (0xffff91a07018): 0x00000000 Write at address 0x00600018 (0xffff91a07018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbdb84000. Read at address 0x00600018 (0xffffbdb84018): 0x00000000 Write at address 0x00600018 (0xffffbdb84018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b94b000. Read at address 0x00600018 (0xffff9b94b018): 0x00000000 Write at address 0x00600018 (0xffff9b94b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92f2e000. Read at address 0x00600018 (0xffff92f2e018): 0x00000000 Write at address 0x00600018 (0xffff92f2e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb9128000. Read at address 0x00600018 (0xffffb9128018): 0x00000000 Write at address 0x00600018 (0xffffb9128018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff895c0000. Read at address 0x00600018 (0xffff895c0018): 0x00000000 Write at address 0x00600018 (0xffff895c0018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8f253000. Read at address 0x00600018 (0xffff8f253018): 0x00000000 Write at address 0x00600018 (0xffff8f253018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9709d000. Read at address 0x00600018 (0xffff9709d018): 0x00000000 Write at address 0x00600018 (0xffff9709d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8bfee000. Read at address 0x00600018 (0xffff8bfee018): 0x00000000 Write at address 0x00600018 (0xffff8bfee018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a9c6000. Read at address 0x00600018 (0xffff9a9c6018): 0x00000000 Write at address 0x00600018 (0xffff9a9c6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbd4d9000. Read at address 0x00600018 (0xffffbd4d9018): 0x00000000 Write at address 0x00600018 (0xffffbd4d9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85e35000. Read at address 0x00600018 (0xffff85e35018): 0x00000000 Write at address 0x00600018 (0xffff85e35018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a5d7000. Read at address 0x00600018 (0xffff9a5d7018): 0x00000000 Write at address 0x00600018 (0xffff9a5d7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb68b8000. Read at address 0x00600018 (0xffffb68b8018): 0x00000000 Write at address 0x00600018 (0xffffb68b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb3bd0000. Read at address 0x00600018 (0xffffb3bd0018): 0x00000000 Write at address 0x00600018 (0xffffb3bd0018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbb0ef000. Read at address 0x00600018 (0xffffbb0ef018): 0x00000000 Write at address 0x00600018 (0xffffbb0ef018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa14f2000. Read at address 0x00600018 (0xffffa14f2018): 0x00000000 Write at address 0x00600018 (0xffffa14f2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff83edd000. Read at address 0x00600018 (0xffff83edd018): 0x00000000 Write at address 0x00600018 (0xffff83edd018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd1df000. Read at address 0x00600018 (0xffffbd1df018): 0x00000000 Write at address 0x00600018 (0xffffbd1df018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88afa000. Read at address 0x00600018 (0xffff88afa018): 0x00000000 Write at address 0x00600018 (0xffff88afa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9711e000. Read at address 0x00600018 (0xffff9711e018): 0x00000000 Write at address 0x00600018 (0xffff9711e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90130000. Read at address 0x00600018 (0xffff90130018): 0x00000000 Write at address 0x00600018 (0xffff90130018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff876ed000. Read at address 0x00600018 (0xffff876ed018): 0x00000000 Write at address 0x00600018 (0xffff876ed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd96e000. Read at address 0x00600018 (0xffffbd96e018): 0x00000000 Write at address 0x00600018 (0xffffbd96e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff85097000. Read at address 0x00600018 (0xffff85097018): 0x00000000 Write at address 0x00600018 (0xffff85097018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99747000. Read at address 0x00600018 (0xffff99747018): 0x00000000 Write at address 0x00600018 (0xffff99747018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc8ee000. Read at address 0x00600018 (0xffffbc8ee018): 0x00000000 Write at address 0x00600018 (0xffffbc8ee018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9b587000. Read at address 0x00600018 (0xffff9b587018): 0x00000000 Write at address 0x00600018 (0xffff9b587018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf1c8000. Read at address 0x00600018 (0xffffbf1c8018): 0x00000000 Write at address 0x00600018 (0xffffbf1c8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff97424000. Read at address 0x00600018 (0xffff97424018): 0x00000000 Write at address 0x00600018 (0xffff97424018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91f67000. Read at address 0x00600018 (0xffff91f67018): 0x00000000 Write at address 0x00600018 (0xffff91f67018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbca61000. Read at address 0x00600018 (0xffffbca61018): 0x00000000 Write at address 0x00600018 (0xffffbca61018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf4c5000. Read at address 0x00600018 (0xffffbf4c5018): 0x00000000 Write at address 0x00600018 (0xffffbf4c5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb071000. Read at address 0x00600018 (0xffffbb071018): 0x00000000 Write at address 0x00600018 (0xffffbb071018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d52e000. Read at address 0x00600018 (0xffff9d52e018): 0x00000000 Write at address 0x00600018 (0xffff9d52e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96ecd000. Read at address 0x00600018 (0xffff96ecd018): 0x00000000 Write at address 0x00600018 (0xffff96ecd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb32cc000. Read at address 0x00600018 (0xffffb32cc018): 0x00000000 Write at address 0x00600018 (0xffffb32cc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start 1720 GC [0] 1802 GC [1] Esel version: 3.102.0.0-IAA10.27 1892 GC [2] 1959 GC [3] 2049 GC [4] 2109 GC [5] 2198 GC [6] 2261 GC [7] 2339 GC [8] 2421 GC [9] 2489 GC [10] 2598 GC [11] DML res1: 0 2708 GC [12] 2808 GC [13] 3011 GC [14] 3180 GC [15] 3382 GC [16] Read DML Algo certÉSBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff92afe000. Read at address 0x00600018 (0xffff92afe018): 0x00000000 Write at address 0x00600018 (0xffff92afe018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4a9a000. Read at address 0x00600018 (0xffffb4a9a018): 0x00000000 Write at address 0x00600018 (0xffffb4a9a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff92b1b000. Read at address 0x00600018 (0xffff92b1b018): 0x00000000 Write at address 0x00600018 (0xffff92b1b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa707f000. Read at address 0x00600018 (0xffffa707f018): 0x00000000 Write at address 0x00600018 (0xffffa707f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa5c5a000. Read at address 0x00600018 (0xffffa5c5a018): 0x00000000 Write at address 0x00600018 (0xffffa5c5a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff915ae000. Read at address 0x00600018 (0xffff915ae018): 0x00000000 Write at address 0x00600018 (0xffff915ae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8b515000. Read at address 0x00600018 (0xffff8b515018): 0x00000000 Write at address 0x00600018 (0xffff8b515018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff90031000. Read at address 0x00600018 (0xffff90031018): 0x00000000 Write at address 0x00600018 (0xffff90031018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa074a000. Read at address 0x00600018 (0xffffa074a018): 0x00000000 Write at address 0x00600018 (0xffffa074a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9553d000. Read at address 0x00600018 (0xffff9553d018): 0x00000000 Write at address 0x00600018 (0xffff9553d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86b73000. Read at address 0x00600018 (0xffff86b73018): 0x00000000 Write at address 0x00600018 (0xffff86b73018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaf1bb000. Read at address 0x00600018 (0xffffaf1bb018): 0x00000000 Write at address 0x00600018 (0xffffaf1bb018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabb92000. Read at address 0x00600018 (0xffffabb92018): 0x00000000 Write at address 0x00600018 (0xffffabb92018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbce9e000. Read at address 0x00600018 (0xffffbce9e018): 0x00000000 Write at address 0x00600018 (0xffffbce9e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffabc67000. Read at address 0x00600018 (0xffffabc67018): 0x00000000 Write at address 0x00600018 (0xffffabc67018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff817ad000. Read at address 0x00600018 (0xffff817ad018): 0x00000000 Write at address 0x00600018 (0xffff817ad018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8768d000. Read at address 0x00600018 (0xffff8768d018): 0x00000000 Write at address 0x00600018 (0xffff8768d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff90d8b000. Read at address 0x00600018 (0xffff90d8b018): 0x00000000 Write at address 0x00600018 (0xffff90d8b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8ea2f000. Read at address 0x00600018 (0xffff8ea2f018): 0x00000000 Write at address 0x00600018 (0xffff8ea2f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97498000. Read at address 0x00600018 (0xffff97498018): 0x00000000 Write at address 0x00600018 (0xffff97498018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff80298000. Read at address 0x00600018 (0xffff80298018): 0x00000000 Write at address 0x00600018 (0xffff80298018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb2687000. Read at address 0x00600018 (0xffffb2687018): 0x00000000 Write at address 0x00600018 (0xffffb2687018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80e89000. Read at address 0x00600018 (0xffff80e89018): 0x00000000 Write at address 0x00600018 (0xffff80e89018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbb60e000. Read at address 0x00600018 (0xffffbb60e018): 0x00000000 Write at address 0x00600018 (0xffffbb60e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a721000. Read at address 0x00600018 (0xffff9a721018): 0x00000000 Write at address 0x00600018 (0xffff9a721018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9c84a000. Read at address 0x00600018 (0xffff9c84a018): 0x00000000 Write at address 0x00600018 (0xffff9c84a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff871f7000. Read at address 0x00600018 (0xffff871f7018): 0x00000000 Write at address 0x00600018 (0xffff871f7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb2f8e000. Read at address 0x00600018 (0xffffb2f8e018): 0x00000000 Write at address 0x00600018 (0xffffb2f8e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi1:dml_code is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff981d8000. Read at address 0x00600018 (0xffff981d8018): 0x00000000 Write at address 0x00600018 (0xffff981d8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 220 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb3026000. Read at address 0x00600018 (0xffffb3026018): 0x00000000 Write at address 0x00600018 (0xffffb3026018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb2ba2000. Read at address 0x00600018 (0xffffb2ba2018): 0x00000000 Write at address 0x00600018 (0xffffb2ba2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa78f9000. Read at address 0x00600018 (0xffffa78f9018): 0x00000000 Write at address 0x00600018 (0xffffa78f9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb5d5b000. Read at address 0x00600018 (0xffffb5d5b018): 0x00000000 Write at address 0x00600018 (0xffffb5d5b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff951b5000. Read at address 0x00600018 (0xffff951b5018): 0x00000000 Write at address 0x00600018 (0xffff951b5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa79ce000. Read at address 0x00600018 (0xffffa79ce018): 0x00000000 Write at address 0x00600018 (0xffffa79ce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb96e2000. Read at address 0x00600018 (0xffffb96e2018): 0x00000000 Write at address 0x00600018 (0xffffb96e2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d3b8000. Read at address 0x00600018 (0xffff9d3b8018): 0x00000000 Write at address 0x00600018 (0xffff9d3b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8854c000. Read at address 0x00600018 (0xffff8854c018): 0x00000000 Write at address 0x00600018 (0xffff8854c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf938000. Read at address 0x00600018 (0xffffaf938018): 0x00000000 Write at address 0x00600018 (0xffffaf938018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9f002000. Read at address 0x00600018 (0xffff9f002018): 0x00000000 Write at address 0x00600018 (0xffff9f002018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb2972000. Read at address 0x00600018 (0xffffb2972018): 0x00000000 Write at address 0x00600018 (0xffffb2972018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa53a2000. Read at address 0x00600018 (0xffffa53a2018): 0x00000000 Write at address 0x00600018 (0xffffa53a2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83ccd000. Read at address 0x00600018 (0xffff83ccd018): 0x00000000 Write at address 0x00600018 (0xffff83ccd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7c9b000. Read at address 0x00600018 (0xffffa7c9b018): 0x00000000 Write at address 0x00600018 (0xffffa7c9b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffae3a4000. Read at address 0x00600018 (0xffffae3a4018): 0x00000000 Write at address 0x00600018 (0xffffae3a4018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff98193000. Read at address 0x00600018 (0xffff98193018): 0x00000000 Write at address 0x00600018 (0xffff98193018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb41ea000. Read at address 0x00600018 (0xffffb41ea018): 0x00000000 Write at address 0x00600018 (0xffffb41ea018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8aabf000. Read at address 0x00600018 (0xffff8aabf018): 0x00000000 Write at address 0x00600018 (0xffff8aabf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbed0f000. Read at address 0x00600018 (0xffffbed0f018): 0x00000000 Write at address 0x00600018 (0xffffbed0f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84652000. Read at address 0x00600018 (0xffff84652018): 0x00000000 Write at address 0x00600018 (0xffff84652018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1c2a000. Read at address 0x00600018 (0xffffb1c2a018): 0x00000000 Write at address 0x00600018 (0xffffb1c2a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff954c9000. Read at address 0x00600018 (0xffff954c9018): 0x00000000 Write at address 0x00600018 (0xffff954c9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8fb38000. Read at address 0x00600018 (0xffff8fb38018): 0x00000000 Write at address 0x00600018 (0xffff8fb38018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc024000. Read at address 0x00600018 (0xffffbc024018): 0x00000000 Write at address 0x00600018 (0xffffbc024018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff853b4000. Read at address 0x00600018 (0xffff853b4018): 0x00000000 Write at address 0x00600018 (0xffff853b4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa715000. Read at address 0x00600018 (0xffffaa715018): 0x00000000 Write at address 0x00600018 (0xffffaa715018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff96f1c000. Read at address 0x00600018 (0xffff96f1c018): 0x00000000 Write at address 0x00600018 (0xffff96f1c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92f57000. Read at address 0x00600018 (0xffff92f57018): 0x00000000 Write at address 0x00600018 (0xffff92f57018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8b78000. Read at address 0x00600018 (0xffffa8b78018): 0x00000000 Write at address 0x00600018 (0xffffa8b78018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffaf926000. Read at address 0x00600018 (0xffffaf926018): 0x00000000 Write at address 0x00600018 (0xffffaf926018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f8cf000. Read at address 0x00600018 (0xffff8f8cf018): 0x00000000 Write at address 0x00600018 (0xffff8f8cf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93a00000. Read at address 0x00600018 (0xffff93a00018): 0x00000000 Write at address 0x00600018 (0xffff93a00018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabf83000. Read at address 0x00600018 (0xffffabf83018): 0x00000000 Write at address 0x00600018 (0xffffabf83018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0d62000. Read at address 0x00600018 (0xffffb0d62018): 0x00000000 Write at address 0x00600018 (0xffffb0d62018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9eee8000. Read at address 0x00600018 (0xffff9eee8018): 0x00000000 Write at address 0x00600018 (0xffff9eee8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4dbf000. Read at address 0x00600018 (0xffffb4dbf018): 0x00000000 Write at address 0x00600018 (0xffffb4dbf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96782000. Read at address 0x00600018 (0xffff96782018): 0x00000000 Write at address 0x00600018 (0xffff96782018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91398000. Read at address 0x00600018 (0xffff91398018): 0x00000000 Write at address 0x00600018 (0xffff91398018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac8f9000. Read at address 0x00600018 (0xffffac8f9018): 0x00000000 Write at address 0x00600018 (0xffffac8f9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbccf8000. Read at address 0x00600018 (0xffffbccf8018): 0x00000000 Write at address 0x00600018 (0xffffbccf8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8b8a3000. Read at address 0x00600018 (0xffff8b8a3018): 0x00000000 Write at address 0x00600018 (0xffff8b8a3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e87c000. Read at address 0x00600018 (0xffff9e87c018): 0x00000000 Write at address 0x00600018 (0xffff9e87c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa062f000. Read at address 0x00600018 (0xffffa062f018): 0x00000000 Write at address 0x00600018 (0xffffa062f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaef5c000. Read at address 0x00600018 (0xffffaef5c018): 0x00000000 Write at address 0x00600018 (0xffffaef5c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3fdc000. Read at address 0x00600018 (0xffffb3fdc018): 0x00000000 Write at address 0x00600018 (0xffffb3fdc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffaa393000. Read at address 0x00600018 (0xffffaa393018): 0x00000000 Write at address 0x00600018 (0xffffaa393018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbed66000. Read at address 0x00600018 (0xffffbed66018): 0x00000000 Write at address 0x00600018 (0xffffbed66018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa51d6000. Read at address 0x00600018 (0xffffa51d6018): 0x00000000 Write at address 0x00600018 (0xffffa51d6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff90d3f000. Read at address 0x00600018 (0xffff90d3f018): 0x00000000 Write at address 0x00600018 (0xffff90d3f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaef0a000. Read at address 0x00600018 (0xffffaef0a018): 0x00000000 Write at address 0x00600018 (0xffffaef0a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad87c000. Read at address 0x00600018 (0xffffad87c018): 0x00000000 Write at address 0x00600018 (0xffffad87c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93fe5000. Read at address 0x00600018 (0xffff93fe5018): 0x00000000 Write at address 0x00600018 (0xffff93fe5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa310b000. Read at address 0x00600018 (0xffffa310b018): 0x00000000 Write at address 0x00600018 (0xffffa310b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bfc4000. Read at address 0x00600018 (0xffff9bfc4018): 0x00000000 Write at address 0x00600018 (0xffff9bfc4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98a0a000. Read at address 0x00600018 (0xffff98a0a018): 0x00000000 Write at address 0x00600018 (0xffff98a0a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96cba000. Read at address 0x00600018 (0xffff96cba018): 0x00000000 Write at address 0x00600018 (0xffff96cba018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb12bd000. Read at address 0x00600018 (0xffffb12bd018): 0x00000000 Write at address 0x00600018 (0xffffb12bd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen net.ipv6.neigh.eth0/2.retrans_time_ms = 0 stop dss Done /dev/mem opened. Memory mapped at address 0xffff85a70000. Read at address 0x00600018 (0xffff85a70018): 0x00000000 Write at address 0x00600018 (0xffff85a70018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff861a3000. Read at address 0x00600018 (0xffff861a3018): 0x00000000 Write at address 0x00600018 (0xffff861a3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff81672000. Read at address 0x00600018 (0xffff81672018): 0x00000000 Write at address 0x00600018 (0xffff81672018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8279000. Read at address 0x00600018 (0xffffa8279018): 0x00000000 Write at address 0x00600018 (0xffffa8279018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa3f5f000. Read at address 0x00600018 (0xffffa3f5f018): 0x00000000 Write at address 0x00600018 (0xffffa3f5f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88974000. Read at address 0x00600018 (0xffff88974018): 0x00000000 Write at address 0x00600018 (0xffff88974018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb96de000. Read at address 0x00600018 (0xffffb96de018): 0x00000000 Write at address 0x00600018 (0xffffb96de018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaed28000. Read at address 0x00600018 (0xffffaed28018): 0x00000000 Write at address 0x00600018 (0xffffaed28018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b946000. Read at address 0x00600018 (0xffff9b946018): 0x00000000 Write at address 0x00600018 (0xffff9b946018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1bac000. Read at address 0x00600018 (0xffffb1bac018): 0x00000000 Write at address 0x00600018 (0xffffb1bac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa8478000. Read at address 0x00600018 (0xffffa8478018): 0x00000000 Write at address 0x00600018 (0xffffa8478018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8600000. Read at address 0x00600018 (0xffffa8600018): 0x00000000 Write at address 0x00600018 (0xffffa8600018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9c2f000. Read at address 0x00600018 (0xffffa9c2f018): 0x00000000 Write at address 0x00600018 (0xffffa9c2f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd53c000. Read at address 0x00600018 (0xffffbd53c018): 0x00000000 Write at address 0x00600018 (0xffffbd53c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc665000. Read at address 0x00600018 (0xffffbc665018): 0x00000000 Write at address 0x00600018 (0xffffbc665018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff99506000. Read at address 0x00600018 (0xffff99506018): 0x00000000 Write at address 0x00600018 (0xffff99506018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7ab4000. Read at address 0x00600018 (0xffffb7ab4018): 0x00000000 Write at address 0x00600018 (0xffffb7ab4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c605000. Read at address 0x00600018 (0xffff9c605018): 0x00000000 Write at address 0x00600018 (0xffff9c605018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbb95c000. Read at address 0x00600018 (0xffffbb95c018): 0x00000000 Write at address 0x00600018 (0xffffbb95c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbd2f3000. Read at address 0x00600018 (0xffffbd2f3018): 0x00000000 Write at address 0x00600018 (0xffffbd2f3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b550000. Read at address 0x00600018 (0xffff9b550018): 0x00000000 Write at address 0x00600018 (0xffff9b550018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb383a000. Read at address 0x00600018 (0xffffb383a018): 0x00000000 Write at address 0x00600018 (0xffffb383a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab8a8000. Read at address 0x00600018 (0xffffab8a8018): 0x00000000 Write at address 0x00600018 (0xffffab8a8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8343d000. Read at address 0x00600018 (0xffff8343d018): 0x00000000 Write at address 0x00600018 (0xffff8343d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbafce000. Read at address 0x00600018 (0xffffbafce018): 0x00000000 Write at address 0x00600018 (0xffffbafce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff908c9000. Read at address 0x00600018 (0xffff908c9018): 0x00000000 Write at address 0x00600018 (0xffff908c9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaa304000. Read at address 0x00600018 (0xffffaa304018): 0x00000000 Write at address 0x00600018 (0xffffaa304018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8202a000. Read at address 0x00600018 (0xffff8202a018): 0x00000000 Write at address 0x00600018 (0xffff8202a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb9c45000. Read at address 0x00600018 (0xffffb9c45018): 0x00000000 Write at address 0x00600018 (0xffffb9c45018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84b55000. Read at address 0x00600018 (0xffff84b55018): 0x00000000 Write at address 0x00600018 (0xffff84b55018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb466a000. Read at address 0x00600018 (0xffffb466a018): 0x00000000 Write at address 0x00600018 (0xffffb466a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3db8000. Read at address 0x00600018 (0xffffb3db8018): 0x00000000 Write at address 0x00600018 (0xffffb3db8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa33a3000. Read at address 0x00600018 (0xffffa33a3018): 0x00000000 Write at address 0x00600018 (0xffffa33a3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb74e000. Read at address 0x00600018 (0xffffbb74e018): 0x00000000 Write at address 0x00600018 (0xffffbb74e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbabd1000. Read at address 0x00600018 (0xffffbabd1018): 0x00000000 Write at address 0x00600018 (0xffffbabd1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa00f7000. Read at address 0x00600018 (0xffffa00f7018): 0x00000000 Write at address 0x00600018 (0xffffa00f7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8eb1e000. Read at address 0x00600018 (0xffff8eb1e018): 0x00000000 Write at address 0x00600018 (0xffff8eb1e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb93ab000. Read at address 0x00600018 (0xffffb93ab018): 0x00000000 Write at address 0x00600018 (0xffffb93ab018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95631000. Read at address 0x00600018 (0xffff95631018): 0x00000000 Write at address 0x00600018 (0xffff95631018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba855000. Read at address 0x00600018 (0xffffba855018): 0x00000000 Write at address 0x00600018 (0xffffba855018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff802c6000. Read at address 0x00600018 (0xffff802c6018): 0x00000000 Write at address 0x00600018 (0xffff802c6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 net.ipv6.conf.all.disable_ipv6 = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93898000. Read at address 0x00600018 (0xffff93898018): 0x00000000 Write at address 0x00600018 (0xffff93898018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82063000. Read at address 0x00600018 (0xffff82063018): 0x00000000 Write at address 0x00600018 (0xffff82063018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaa597000. Read at address 0x00600018 (0xffffaa597018): 0x00000000 Write at address 0x00600018 (0xffffaa597018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88187000. Read at address 0x00600018 (0xffff88187018): 0x00000000 Write at address 0x00600018 (0xffff88187018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0301000. Read at address 0x00600018 (0xffffa0301018): 0x00000000 Write at address 0x00600018 (0xffffa0301018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffacb79000. Read at address 0x00600018 (0xffffacb79018): 0x00000000 Write at address 0x00600018 (0xffffacb79018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8e3d8000. Read at address 0x00600018 (0xffff8e3d8018): 0x00000000 Write at address 0x00600018 (0xffff8e3d8018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3f9f000. Read at address 0x00600018 (0xffffb3f9f018): 0x00000000 Write at address 0x00600018 (0xffffb3f9f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e98d000. Read at address 0x00600018 (0xffff9e98d018): 0x00000000 Write at address 0x00600018 (0xffff9e98d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffba71c000. Read at address 0x00600018 (0xffffba71c018): 0x00000000 Write at address 0x00600018 (0xffffba71c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ffa0000. Read at address 0x00600018 (0xffff8ffa0018): 0x00000000 Write at address 0x00600018 (0xffff8ffa0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0d7d000. Read at address 0x00600018 (0xffffa0d7d018): 0x00000000 Write at address 0x00600018 (0xffffa0d7d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb318c000. Read at address 0x00600018 (0xffffb318c018): 0x00000000 Write at address 0x00600018 (0xffffb318c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff83738000. Read at address 0x00600018 (0xffff83738018): 0x00000000 Write at address 0x00600018 (0xffff83738018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbcdcf000. Read at address 0x00600018 (0xffffbcdcf018): 0x00000000 Write at address 0x00600018 (0xffffbcdcf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95fc8000. Read at address 0x00600018 (0xffff95fc8018): 0x00000000 Write at address 0x00600018 (0xffff95fc8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c96d000. Read at address 0x00600018 (0xffff8c96d018): 0x00000000 Write at address 0x00600018 (0xffff8c96d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff7fb7a000. Read at address 0x00600018 (0xffff7fb7a018): 0x00000000 Write at address 0x00600018 (0xffff7fb7a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaeb21000. Read at address 0x00600018 (0xffffaeb21018): 0x00000000 Write at address 0x00600018 (0xffffaeb21018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f70e000. Read at address 0x00600018 (0xffff8f70e018): 0x00000000 Write at address 0x00600018 (0xffff8f70e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9032f000. Read at address 0x00600018 (0xffff9032f018): 0x00000000 Write at address 0x00600018 (0xffff9032f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88faa000. Read at address 0x00600018 (0xffff88faa018): 0x00000000 Write at address 0x00600018 (0xffff88faa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7265000. Read at address 0x00600018 (0xffffa7265018): 0x00000000 Write at address 0x00600018 (0xffffa7265018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b350000. Read at address 0x00600018 (0xffff9b350018): 0x00000000 Write at address 0x00600018 (0xffff9b350018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80a4a000. Read at address 0x00600018 (0xffff80a4a018): 0x00000000 Write at address 0x00600018 (0xffff80a4a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f8b0000. Read at address 0x00600018 (0xffff9f8b0018): 0x00000000 Write at address 0x00600018 (0xffff9f8b0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9258e000. Read at address 0x00600018 (0xffff9258e018): 0x00000000 Write at address 0x00600018 (0xffff9258e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9bb60000. Read at address 0x00600018 (0xffff9bb60018): 0x00000000 Write at address 0x00600018 (0xffff9bb60018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaf862000. Read at address 0x00600018 (0xffffaf862018): 0x00000000 Write at address 0x00600018 (0xffffaf862018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb89f5000. Read at address 0x00600018 (0xffffb89f5018): 0x00000000 Write at address 0x00600018 (0xffffb89f5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad3dd000. Read at address 0x00600018 (0xffffad3dd018): 0x00000000 Write at address 0x00600018 (0xffffad3dd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9816b000. Read at address 0x00600018 (0xffff9816b018): 0x00000000 Write at address 0x00600018 (0xffff9816b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8d39000. Read at address 0x00600018 (0xffffa8d39018): 0x00000000 Write at address 0x00600018 (0xffffa8d39018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb94b9000. Read at address 0x00600018 (0xffffb94b9018): 0x00000000 Write at address 0x00600018 (0xffffb94b9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4d3b000. Read at address 0x00600018 (0xffffa4d3b018): 0x00000000 Write at address 0x00600018 (0xffffa4d3b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb8a93000. Read at address 0x00600018 (0xffffb8a93018): 0x00000000 Write at address 0x00600018 (0xffffb8a93018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb462b000. Read at address 0x00600018 (0xffffb462b018): 0x00000000 Write at address 0x00600018 (0xffffb462b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff920d8000. Read at address 0x00600018 (0xffff920d8018): 0x00000000 Write at address 0x00600018 (0xffff920d8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf8a3000. Read at address 0x00600018 (0xffffaf8a3018): 0x00000000 Write at address 0x00600018 (0xffffaf8a3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85408000. Read at address 0x00600018 (0xffff85408018): 0x00000000 Write at address 0x00600018 (0xffff85408018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8f7b9000. Read at address 0x00600018 (0xffff8f7b9018): 0x00000000 Write at address 0x00600018 (0xffff8f7b9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa1d0e000. Read at address 0x00600018 (0xffffa1d0e018): 0x00000000 Write at address 0x00600018 (0xffffa1d0e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa77b2000. Read at address 0x00600018 (0xffffa77b2018): 0x00000000 Write at address 0x00600018 (0xffffa77b2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94b19000. Read at address 0x00600018 (0xffff94b19018): 0x00000000 Write at address 0x00600018 (0xffff94b19018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4446000. Read at address 0x00600018 (0xffffb4446018): 0x00000000 Write at address 0x00600018 (0xffffb4446018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90d96000. Read at address 0x00600018 (0xffff90d96018): 0x00000000 Write at address 0x00600018 (0xffff90d96018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa19fb000. Read at address 0x00600018 (0xffffa19fb018): 0x00000000 Write at address 0x00600018 (0xffffa19fb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff872a7000. Read at address 0x00600018 (0xffff872a7018): 0x00000000 Write at address 0x00600018 (0xffff872a7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf226000. Read at address 0x00600018 (0xffffaf226018): 0x00000000 Write at address 0x00600018 (0xffffaf226018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaebb5000. Read at address 0x00600018 (0xffffaebb5018): 0x00000000 Write at address 0x00600018 (0xffffaebb5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbdc3f000. Read at address 0x00600018 (0xffffbdc3f018): 0x00000000 Write at address 0x00600018 (0xffffbdc3f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98010000. Read at address 0x00600018 (0xffff98010018): 0x00000000 Write at address 0x00600018 (0xffff98010018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1938000. Read at address 0x00600018 (0xffffa1938018): 0x00000000 Write at address 0x00600018 (0xffffa1938018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fdff000. Read at address 0x00600018 (0xffff8fdff018): 0x00000000 Write at address 0x00600018 (0xffff8fdff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e57e000. Read at address 0x00600018 (0xffff9e57e018): 0x00000000 Write at address 0x00600018 (0xffff9e57e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb75a9000. Read at address 0x00600018 (0xffffb75a9018): 0x00000000 Write at address 0x00600018 (0xffffb75a9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa7ece000. Read at address 0x00600018 (0xffffa7ece018): 0x00000000 Write at address 0x00600018 (0xffffa7ece018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1282000. Read at address 0x00600018 (0xffffa1282018): 0x00000000 Write at address 0x00600018 (0xffffa1282018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0346000. Read at address 0x00600018 (0xffffa0346018): 0x00000000 Write at address 0x00600018 (0xffffa0346018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff94666000. Read at address 0x00600018 (0xffff94666018): 0x00000000 Write at address 0x00600018 (0xffff94666018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96991000. Read at address 0x00600018 (0xffff96991018): 0x00000000 Write at address 0x00600018 (0xffff96991018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa6299000. Read at address 0x00600018 (0xffffa6299018): 0x00000000 Write at address 0x00600018 (0xffffa6299018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a114000. Read at address 0x00600018 (0xffff8a114018): 0x00000000 Write at address 0x00600018 (0xffff8a114018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff93aa9000. Read at address 0x00600018 (0xffff93aa9018): 0x00000000 Write at address 0x00600018 (0xffff93aa9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa9988000. Read at address 0x00600018 (0xffffa9988018): 0x00000000 Write at address 0x00600018 (0xffffa9988018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7f22000. Read at address 0x00600018 (0xffffb7f22018): 0x00000000 Write at address 0x00600018 (0xffffb7f22018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2db5000. Read at address 0x00600018 (0xffffb2db5018): 0x00000000 Write at address 0x00600018 (0xffffb2db5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb447d000. Read at address 0x00600018 (0xffffb447d018): 0x00000000 Write at address 0x00600018 (0xffffb447d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff908cc000. Read at address 0x00600018 (0xffff908cc018): 0x00000000 Write at address 0x00600018 (0xffff908cc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf12a000. Read at address 0x00600018 (0xffffbf12a018): 0x00000000 Write at address 0x00600018 (0xffffbf12a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81d76000. Read at address 0x00600018 (0xffff81d76018): 0x00000000 Write at address 0x00600018 (0xffff81d76018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff900de000. Read at address 0x00600018 (0xffff900de018): 0x00000000 Write at address 0x00600018 (0xffff900de018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff861f4000. Read at address 0x00600018 (0xffff861f4018): 0x00000000 Write at address 0x00600018 (0xffff861f4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff95ca6000. Read at address 0x00600018 (0xffff95ca6018): 0x00000000 Write at address 0x00600018 (0xffff95ca6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9eafc000. Read at address 0x00600018 (0xffff9eafc018): 0x00000000 Write at address 0x00600018 (0xffff9eafc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4a9d000. Read at address 0x00600018 (0xffffb4a9d018): 0x00000000 Write at address 0x00600018 (0xffffb4a9d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff886a9000. Read at address 0x00600018 (0xffff886a9018): 0x00000000 Write at address 0x00600018 (0xffff886a9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87a18000. Read at address 0x00600018 (0xffff87a18018): 0x00000000 Write at address 0x00600018 (0xffff87a18018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1fcb000. Read at address 0x00600018 (0xffffb1fcb018): 0x00000000 Write at address 0x00600018 (0xffffb1fcb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbbd66000. Read at address 0x00600018 (0xffffbbd66018): 0x00000000 Write at address 0x00600018 (0xffffbbd66018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80918000. Read at address 0x00600018 (0xffff80918018): 0x00000000 Write at address 0x00600018 (0xffff80918018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae5bb000. Read at address 0x00600018 (0xffffae5bb018): 0x00000000 Write at address 0x00600018 (0xffffae5bb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff83407000. Read at address 0x00600018 (0xffff83407018): 0x00000000 Write at address 0x00600018 (0xffff83407018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaddc1000. Read at address 0x00600018 (0xffffaddc1018): 0x00000000 Write at address 0x00600018 (0xffffaddc1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaced2000. Read at address 0x00600018 (0xffffaced2018): 0x00000000 Write at address 0x00600018 (0xffffaced2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbec86000. Read at address 0x00600018 (0xffffbec86018): 0x00000000 Write at address 0x00600018 (0xffffbec86018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2d9f000. Read at address 0x00600018 (0xffffa2d9f018): 0x00000000 Write at address 0x00600018 (0xffffa2d9f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91e46000. Read at address 0x00600018 (0xffff91e46018): 0x00000000 Write at address 0x00600018 (0xffff91e46018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff888ce000. Read at address 0x00600018 (0xffff888ce018): 0x00000000 Write at address 0x00600018 (0xffff888ce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98721000. Read at address 0x00600018 (0xffff98721018): 0x00000000 Write at address 0x00600018 (0xffff98721018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa8883000. Read at address 0x00600018 (0xffffa8883018): 0x00000000 Write at address 0x00600018 (0xffffa8883018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae93a000. Read at address 0x00600018 (0xffffae93a018): 0x00000000 Write at address 0x00600018 (0xffffae93a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb495c000. Read at address 0x00600018 (0xffffb495c018): 0x00000000 Write at address 0x00600018 (0xffffb495c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff92843000. Read at address 0x00600018 (0xffff92843018): 0x00000000 Write at address 0x00600018 (0xffff92843018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff84813000. Read at address 0x00600018 (0xffff84813018): 0x00000000 Write at address 0x00600018 (0xffff84813018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8c65b000. Read at address 0x00600018 (0xffff8c65b018): 0x00000000 Write at address 0x00600018 (0xffff8c65b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8796f000. Read at address 0x00600018 (0xffff8796f018): 0x00000000 Write at address 0x00600018 (0xffff8796f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8283c000. Read at address 0x00600018 (0xffff8283c018): 0x00000000 Write at address 0x00600018 (0xffff8283c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fe31000. Read at address 0x00600018 (0xffff8fe31018): 0x00000000 Write at address 0x00600018 (0xffff8fe31018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa34d000. Read at address 0x00600018 (0xffffaa34d018): 0x00000000 Write at address 0x00600018 (0xffffaa34d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9929e000. Read at address 0x00600018 (0xffff9929e018): 0x00000000 Write at address 0x00600018 (0xffff9929e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab2ac000. Read at address 0x00600018 (0xffffab2ac018): 0x00000000 Write at address 0x00600018 (0xffffab2ac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa3463000. Read at address 0x00600018 (0xffffa3463018): 0x00000000 Write at address 0x00600018 (0xffffa3463018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7365000. Read at address 0x00600018 (0xffffb7365018): 0x00000000 Write at address 0x00600018 (0xffffb7365018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa89f000. Read at address 0x00600018 (0xffffaa89f018): 0x00000000 Write at address 0x00600018 (0xffffaa89f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88b7b000. Read at address 0x00600018 (0xffff88b7b018): 0x00000000 Write at address 0x00600018 (0xffff88b7b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 net.ipv6.conf.all.disable_ipv6 = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaf3b2000. Read at address 0x00600018 (0xffffaf3b2018): 0x00000000 Write at address 0x00600018 (0xffffaf3b2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94865000. Read at address 0x00600018 (0xffff94865018): 0x00000000 Write at address 0x00600018 (0xffff94865018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab2e1000. Read at address 0x00600018 (0xffffab2e1018): 0x00000000 Write at address 0x00600018 (0xffffab2e1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4881000. Read at address 0x00600018 (0xffffb4881018): 0x00000000 Write at address 0x00600018 (0xffffb4881018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8de57000. Read at address 0x00600018 (0xffff8de57018): 0x00000000 Write at address 0x00600018 (0xffff8de57018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff968fa000. Read at address 0x00600018 (0xffff968fa018): 0x00000000 Write at address 0x00600018 (0xffff968fa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a5e0000. Read at address 0x00600018 (0xffff8a5e0018): 0x00000000 Write at address 0x00600018 (0xffff8a5e0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaba95000. Read at address 0x00600018 (0xffffaba95018): 0x00000000 Write at address 0x00600018 (0xffffaba95018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Memory mapped at address 0xffff87a0c000. Read at address 0x00600018 (0xffff87a0c018): 0x00000000 Write at address 0x00600018 (0xffff87a0c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaa2d3000. Read at address 0x00600018 (0xffffaa2d3018): 0x00000000 Write at address 0x00600018 (0xffffaa2d3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82b4f000. Read at address 0x00600018 (0xffff82b4f018): 0x00000000 Write at address 0x00600018 (0xffff82b4f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97c9d000. Read at address 0x00600018 (0xffff97c9d018): 0x00000000 Write at address 0x00600018 (0xffff97c9d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8402f000. Read at address 0x00600018 (0xffff8402f018): 0x00000000 Write at address 0x00600018 (0xffff8402f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e5d7000. Read at address 0x00600018 (0xffff9e5d7018): 0x00000000 Write at address 0x00600018 (0xffff9e5d7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac9ed000. Read at address 0x00600018 (0xffffac9ed018): 0x00000000 Write at address 0x00600018 (0xffffac9ed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa12a3000. Read at address 0x00600018 (0xffffa12a3018): 0x00000000 Write at address 0x00600018 (0xffffa12a3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb5f7f000. Read at address 0x00600018 (0xffffb5f7f018): 0x00000000 Write at address 0x00600018 (0xffffb5f7f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf9c3000. Read at address 0x00600018 (0xffffaf9c3018): 0x00000000 Write at address 0x00600018 (0xffffaf9c3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa289a000. Read at address 0x00600018 (0xffffa289a018): 0x00000000 Write at address 0x00600018 (0xffffa289a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf28f000. Read at address 0x00600018 (0xffffbf28f018): 0x00000000 Write at address 0x00600018 (0xffffbf28f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff81003000. Read at address 0x00600018 (0xffff81003018): 0x00000000 Write at address 0x00600018 (0xffff81003018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa867a000. Read at address 0x00600018 (0xffffa867a018): 0x00000000 Write at address 0x00600018 (0xffffa867a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaa0fb000. Read at address 0x00600018 (0xffffaa0fb018): 0x00000000 Write at address 0x00600018 (0xffffaa0fb018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8486a000. Read at address 0x00600018 (0xffff8486a018): 0x00000000 Write at address 0x00600018 (0xffff8486a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8ea61000. Read at address 0x00600018 (0xffff8ea61018): 0x00000000 Write at address 0x00600018 (0xffff8ea61018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96a77000. Read at address 0x00600018 (0xffff96a77018): 0x00000000 Write at address 0x00600018 (0xffff96a77018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8d02e000. Read at address 0x00600018 (0xffff8d02e018): 0x00000000 Write at address 0x00600018 (0xffff8d02e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fb7d000. Read at address 0x00600018 (0xffff7fb7d018): 0x00000000 Write at address 0x00600018 (0xffff7fb7d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbea43000. Read at address 0x00600018 (0xffffbea43018): 0x00000000 Write at address 0x00600018 (0xffffbea43018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93006000. Read at address 0x00600018 (0xffff93006018): 0x00000000 Write at address 0x00600018 (0xffff93006018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffafc51000. Read at address 0x00600018 (0xffffafc51018): 0x00000000 Write at address 0x00600018 (0xffffafc51018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbd95b000. Read at address 0x00600018 (0xffffbd95b018): 0x00000000 Write at address 0x00600018 (0xffffbd95b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb2f0d000. Read at address 0x00600018 (0xffffb2f0d018): 0x00000000 Write at address 0x00600018 (0xffffb2f0d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad480000. Read at address 0x00600018 (0xffffad480018): 0x00000000 Write at address 0x00600018 (0xffffad480018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff83bbb000. Read at address 0x00600018 (0xffff83bbb018): 0x00000000 Write at address 0x00600018 (0xffff83bbb018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9dda6000. Read at address 0x00600018 (0xffff9dda6018): 0x00000000 Write at address 0x00600018 (0xffff9dda6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8dd94000. Read at address 0x00600018 (0xffff8dd94018): 0x00000000 Write at address 0x00600018 (0xffff8dd94018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8d31000. Read at address 0x00600018 (0xffffa8d31018): 0x00000000 Write at address 0x00600018 (0xffffa8d31018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6fb7000. Read at address 0x00600018 (0xffffa6fb7018): 0x00000000 Write at address 0x00600018 (0xffffa6fb7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb9b86000. Read at address 0x00600018 (0xffffb9b86018): 0x00000000 Write at address 0x00600018 (0xffffb9b86018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd2b2000. Read at address 0x00600018 (0xffffbd2b2018): 0x00000000 Write at address 0x00600018 (0xffffbd2b2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff93d60000. Read at address 0x00600018 (0xffff93d60018): 0x00000000 Write at address 0x00600018 (0xffff93d60018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9373000. Read at address 0x00600018 (0xffffa9373018): 0x00000000 Write at address 0x00600018 (0xffffa9373018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb0656000. Read at address 0x00600018 (0xffffb0656018): 0x00000000 Write at address 0x00600018 (0xffffb0656018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa362d000. Read at address 0x00600018 (0xffffa362d018): 0x00000000 Write at address 0x00600018 (0xffffa362d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c329000. Read at address 0x00600018 (0xffff8c329018): 0x00000000 Write at address 0x00600018 (0xffff8c329018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ee8a000. Read at address 0x00600018 (0xffff8ee8a018): 0x00000000 Write at address 0x00600018 (0xffff8ee8a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff920e3000. Read at address 0x00600018 (0xffff920e3018): 0x00000000 Write at address 0x00600018 (0xffff920e3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb9b85000. Read at address 0x00600018 (0xffffb9b85018): 0x00000000 Write at address 0x00600018 (0xffffb9b85018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c20b000. Read at address 0x00600018 (0xffff8c20b018): 0x00000000 Write at address 0x00600018 (0xffff8c20b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff83024000. Read at address 0x00600018 (0xffff83024018): 0x00000000 Write at address 0x00600018 (0xffff83024018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97f27000. Read at address 0x00600018 (0xffff97f27018): 0x00000000 Write at address 0x00600018 (0xffff97f27018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb2238000. Read at address 0x00600018 (0xffffb2238018): 0x00000000 Write at address 0x00600018 (0xffffb2238018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d5e0000. Read at address 0x00600018 (0xffff9d5e0018): 0x00000000 Write at address 0x00600018 (0xffff9d5e0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd466000. Read at address 0x00600018 (0xffffbd466018): 0x00000000 Write at address 0x00600018 (0xffffbd466018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff83d0e000. Read at address 0x00600018 (0xffff83d0e018): 0x00000000 Write at address 0x00600018 (0xffff83d0e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff864bb000. Read at address 0x00600018 (0xffff864bb018): 0x00000000 Write at address 0x00600018 (0xffff864bb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99330000. Read at address 0x00600018 (0xffff99330018): 0x00000000 Write at address 0x00600018 (0xffff99330018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82ae3000. Read at address 0x00600018 (0xffff82ae3018): 0x00000000 Write at address 0x00600018 (0xffff82ae3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2444000. Read at address 0x00600018 (0xffffb2444018): 0x00000000 Write at address 0x00600018 (0xffffb2444018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa04ce000. Read at address 0x00600018 (0xffffa04ce018): 0x00000000 Write at address 0x00600018 (0xffffa04ce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1b02000. Read at address 0x00600018 (0xffffa1b02018): 0x00000000 Write at address 0x00600018 (0xffffa1b02018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81faa000. Read at address 0x00600018 (0xffff81faa018): 0x00000000 Write at address 0x00600018 (0xffff81faa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9940c000. Read at address 0x00600018 (0xffff9940c018): 0x00000000 Write at address 0x00600018 (0xffff9940c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff943bb000. Read at address 0x00600018 (0xffff943bb018): 0x00000000 Write at address 0x00600018 (0xffff943bb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 net.ipv6.conf.eth0.dad_transmits = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffacef4000. Read at address 0x00600018 (0xffffacef4018): 0x00000000 Write at address 0x00600018 (0xffffacef4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa8bf1000. Read at address 0x00600018 (0xffffa8bf1018): 0x00000000 Write at address 0x00600018 (0xffffa8bf1018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffadcd2000. Read at address 0x00600018 (0xffffadcd2018): 0x00000000 Write at address 0x00600018 (0xffffadcd2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff83d94000. Read at address 0x00600018 (0xffff83d94018): 0x00000000 Write at address 0x00600018 (0xffff83d94018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94a4f000. Read at address 0x00600018 (0xffff94a4f018): 0x00000000 Write at address 0x00600018 (0xffff94a4f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5828000. Read at address 0x00600018 (0xffffa5828018): 0x00000000 Write at address 0x00600018 (0xffffa5828018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa667c000. Read at address 0x00600018 (0xffffa667c018): 0x00000000 Write at address 0x00600018 (0xffffa667c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94acd000. Read at address 0x00600018 (0xffff94acd018): 0x00000000 Write at address 0x00600018 (0xffff94acd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9808c000. Read at address 0x00600018 (0xffff9808c018): 0x00000000 Write at address 0x00600018 (0xffff9808c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95937000. Read at address 0x00600018 (0xffff95937018): 0x00000000 Write at address 0x00600018 (0xffff95937018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff80924000. Read at address 0x00600018 (0xffff80924018): 0x00000000 Write at address 0x00600018 (0xffff80924018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ca4e000. Read at address 0x00600018 (0xffff8ca4e018): 0x00000000 Write at address 0x00600018 (0xffff8ca4e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2e36000. Read at address 0x00600018 (0xffffb2e36018): 0x00000000 Write at address 0x00600018 (0xffffb2e36018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa32fe000. Read at address 0x00600018 (0xffffa32fe018): 0x00000000 Write at address 0x00600018 (0xffffa32fe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ec97000. Read at address 0x00600018 (0xffff9ec97018): 0x00000000 Write at address 0x00600018 (0xffff9ec97018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2734000. Read at address 0x00600018 (0xffffb2734018): 0x00000000 Write at address 0x00600018 (0xffffb2734018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84f76000. Read at address 0x00600018 (0xffff84f76018): 0x00000000 Write at address 0x00600018 (0xffff84f76018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6b87000. Read at address 0x00600018 (0xffffb6b87018): 0x00000000 Write at address 0x00600018 (0xffffb6b87018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb291c000. Read at address 0x00600018 (0xffffb291c018): 0x00000000 Write at address 0x00600018 (0xffffb291c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa0f57000. Read at address 0x00600018 (0xffffa0f57018): 0x00000000 Write at address 0x00600018 (0xffffa0f57018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa113c000. Read at address 0x00600018 (0xffffa113c018): 0x00000000 Write at address 0x00600018 (0xffffa113c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa71cb000. Read at address 0x00600018 (0xffffa71cb018): 0x00000000 Write at address 0x00600018 (0xffffa71cb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbbdcc000. Read at address 0x00600018 (0xffffbbdcc018): 0x00000000 Write at address 0x00600018 (0xffffbbdcc018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1681000. Read at address 0x00600018 (0xffffa1681018): 0x00000000 Write at address 0x00600018 (0xffffa1681018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96d36000. Read at address 0x00600018 (0xffff96d36018): 0x00000000 Write at address 0x00600018 (0xffff96d36018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb524d000. Read at address 0x00600018 (0xffffb524d018): 0x00000000 Write at address 0x00600018 (0xffffb524d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93c83000. Read at address 0x00600018 (0xffff93c83018): 0x00000000 Write at address 0x00600018 (0xffff93c83018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff94153000. Read at address 0x00600018 (0xffff94153018): 0x00000000 Write at address 0x00600018 (0xffff94153018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8e997000. Read at address 0x00600018 (0xffff8e997018): 0x00000000 Write at address 0x00600018 (0xffff8e997018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99940000. Read at address 0x00600018 (0xffff99940018): 0x00000000 Write at address 0x00600018 (0xffff99940018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82678000. Read at address 0x00600018 (0xffff82678018): 0x00000000 Write at address 0x00600018 (0xffff82678018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbdc77000. Read at address 0x00600018 (0xffffbdc77018): 0x00000000 Write at address 0x00600018 (0xffffbdc77018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fa9e000. Read at address 0x00600018 (0xffff8fa9e018): 0x00000000 Write at address 0x00600018 (0xffff8fa9e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0fe2000. Read at address 0x00600018 (0xffffb0fe2018): 0x00000000 Write at address 0x00600018 (0xffffb0fe2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff87d5c000. Read at address 0x00600018 (0xffff87d5c018): 0x00000000 Write at address 0x00600018 (0xffff87d5c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8df63000. Read at address 0x00600018 (0xffff8df63018): 0x00000000 Write at address 0x00600018 (0xffff8df63018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5117000. Read at address 0x00600018 (0xffffa5117018): 0x00000000 Write at address 0x00600018 (0xffffa5117018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e044000. Read at address 0x00600018 (0xffff9e044018): 0x00000000 Write at address 0x00600018 (0xffff9e044018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff87ad7000. Read at address 0x00600018 (0xffff87ad7018): 0x00000000 Write at address 0x00600018 (0xffff87ad7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6efe000. Read at address 0x00600018 (0xffffa6efe018): 0x00000000 Write at address 0x00600018 (0xffffa6efe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. ubi2:animations is mounted. ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92c12000. Read at address 0x00600018 (0xffff92c12018): 0x00000000 Write at address 0x00600018 (0xffff92c12018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8820000. Read at address 0x00600018 (0xffffa8820018): 0x00000000 Write at address 0x00600018 (0xffffa8820018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d00e000. Read at address 0x00600018 (0xffff8d00e018): 0x00000000 Write at address 0x00600018 (0xffff8d00e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff86bc2000. Read at address 0x00600018 (0xffff86bc2018): 0x00000000 Write at address 0x00600018 (0xffff86bc2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc038000. Read at address 0x00600018 (0xffffbc038018): 0x00000000 Write at address 0x00600018 (0xffffbc038018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8d2ee000. Read at address 0x00600018 (0xffff8d2ee018): 0x00000000 Write at address 0x00600018 (0xffff8d2ee018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9a50a000. Read at address 0x00600018 (0xffff9a50a018): 0x00000000 Write at address 0x00600018 (0xffff9a50a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83138000. Read at address 0x00600018 (0xffff83138018): 0x00000000 Write at address 0x00600018 (0xffff83138018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb54c5000. Read at address 0x00600018 (0xffffb54c5018): 0x00000000 Write at address 0x00600018 (0xffffb54c5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82c70000. Read at address 0x00600018 (0xffff82c70018): 0x00000000 Write at address 0x00600018 (0xffff82c70018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff83e82000. Read at address 0x00600018 (0xffff83e82018): 0x00000000 Write at address 0x00600018 (0xffff83e82018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff90c8d000. Read at address 0x00600018 (0xffff90c8d018): 0x00000000 Write at address 0x00600018 (0xffff90c8d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff904d5000. Read at address 0x00600018 (0xffff904d5018): 0x00000000 Write at address 0x00600018 (0xffff904d5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa6409000. Read at address 0x00600018 (0xffffa6409018): 0x00000000 Write at address 0x00600018 (0xffffa6409018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8820d000. Read at address 0x00600018 (0xffff8820d018): 0x00000000 Write at address 0x00600018 (0xffff8820d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa577b000. Read at address 0x00600018 (0xffffa577b018): 0x00000000 Write at address 0x00600018 (0xffffa577b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b589000. Read at address 0x00600018 (0xffff8b589018): 0x00000000 Write at address 0x00600018 (0xffff8b589018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffadd27000. Read at address 0x00600018 (0xffffadd27018): 0x00000000 Write at address 0x00600018 (0xffffadd27018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb02d000. Read at address 0x00600018 (0xffffbb02d018): 0x00000000 Write at address 0x00600018 (0xffffbb02d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a453000. Read at address 0x00600018 (0xffff9a453018): 0x00000000 Write at address 0x00600018 (0xffff9a453018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d8f3000. Read at address 0x00600018 (0xffff8d8f3018): 0x00000000 Write at address 0x00600018 (0xffff8d8f3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bb0e000. Read at address 0x00600018 (0xffff9bb0e018): 0x00000000 Write at address 0x00600018 (0xffff9bb0e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc223000. Read at address 0x00600018 (0xffffbc223018): 0x00000000 Write at address 0x00600018 (0xffffbc223018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa9268000. Read at address 0x00600018 (0xffffa9268018): 0x00000000 Write at address 0x00600018 (0xffffa9268018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab9ba000. Read at address 0x00600018 (0xffffab9ba018): 0x00000000 Write at address 0x00600018 (0xffffab9ba018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffac43b000. Read at address 0x00600018 (0xffffac43b018): 0x00000000 Write at address 0x00600018 (0xffffac43b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e968000. Read at address 0x00600018 (0xffff8e968018): 0x00000000 Write at address 0x00600018 (0xffff8e968018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff909e7000. Read at address 0x00600018 (0xffff909e7018): 0x00000000 Write at address 0x00600018 (0xffff909e7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9dad5000. Read at address 0x00600018 (0xffff9dad5018): 0x00000000 Write at address 0x00600018 (0xffff9dad5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e1c5000. Read at address 0x00600018 (0xffff8e1c5018): 0x00000000 Write at address 0x00600018 (0xffff8e1c5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa6b96000. Read at address 0x00600018 (0xffffa6b96018): 0x00000000 Write at address 0x00600018 (0xffffa6b96018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb3974000. Read at address 0x00600018 (0xffffb3974018): 0x00000000 Write at address 0x00600018 (0xffffb3974018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab278000. Read at address 0x00600018 (0xffffab278018): 0x00000000 Write at address 0x00600018 (0xffffab278018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff82a93000. Read at address 0x00600018 (0xffff82a93018): 0x00000000 Write at address 0x00600018 (0xffff82a93018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e4db000. Read at address 0x00600018 (0xffff9e4db018): 0x00000000 Write at address 0x00600018 (0xffff9e4db018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83418000. Read at address 0x00600018 (0xffff83418018): 0x00000000 Write at address 0x00600018 (0xffff83418018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98376000. Read at address 0x00600018 (0xffff98376018): 0x00000000 Write at address 0x00600018 (0xffff98376018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a434000. Read at address 0x00600018 (0xffff8a434018): 0x00000000 Write at address 0x00600018 (0xffff8a434018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae67a000. Read at address 0x00600018 (0xffffae67a018): 0x00000000 Write at address 0x00600018 (0xffffae67a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8eca2000. Read at address 0x00600018 (0xffff8eca2018): 0x00000000 Write at address 0x00600018 (0xffff8eca2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbed8b000. Read at address 0x00600018 (0xffffbed8b018): 0x00000000 Write at address 0x00600018 (0xffffbed8b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84c64000. Read at address 0x00600018 (0xffff84c64018): 0x00000000 Write at address 0x00600018 (0xffff84c64018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 dINIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87cf2000. Read at address 0x00600018 (0xffff87cf2018): 0x00000000 Write at address 0x00600018 (0xffff87cf2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc34f000. Read at address 0x00600018 (0xffffbc34f018): 0x00000000 Write at address 0x00600018 (0xffffbc34f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92ce1000. Read at address 0x00600018 (0xffff92ce1018): 0x00000000 Write at address 0x00600018 (0xffff92ce1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff94a21000. Read at address 0x00600018 (0xffff94a21018): 0x00000000 Write at address 0x00600018 (0xffff94a21018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9440e000. Read at address 0x00600018 (0xffff9440e018): 0x00000000 Write at address 0x00600018 (0xffff9440e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9b66d000. Read at address 0x00600018 (0xffff9b66d018): 0x00000000 Write at address 0x00600018 (0xffff9b66d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8be2f000. Read at address 0x00600018 (0xffff8be2f018): 0x00000000 Write at address 0x00600018 (0xffff8be2f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa2f23000. Read at address 0x00600018 (0xffffa2f23018): 0x00000000 Write at address 0x00600018 (0xffffa2f23018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb2d01000. Read at address 0x00600018 (0xffffb2d01018): 0x00000000 Write at address 0x00600018 (0xffffb2d01018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb621a000. Read at address 0x00600018 (0xffffb621a018): 0x00000000 Write at address 0x00600018 (0xffffb621a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9106000. Read at address 0x00600018 (0xffffa9106018): 0x00000000 Write at address 0x00600018 (0xffffa9106018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff828ac000. Read at address 0x00600018 (0xffff828ac018): 0x00000000 Write at address 0x00600018 (0xffff828ac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa406e000. Read at address 0x00600018 (0xffffa406e018): 0x00000000 Write at address 0x00600018 (0xffffa406e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9163d000. Read at address 0x00600018 (0xffff9163d018): 0x00000000 Write at address 0x00600018 (0xffff9163d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff994ad000. Read at address 0x00600018 (0xffff994ad018): 0x00000000 Write at address 0x00600018 (0xffff994ad018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff96221000. Read at address 0x00600018 (0xffff96221018): 0x00000000 Write at address 0x00600018 (0xffff96221018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9a707000. Read at address 0x00600018 (0xffff9a707018): 0x00000000 Write at address 0x00600018 (0xffff9a707018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6122000. Read at address 0x00600018 (0xffffb6122018): 0x00000000 Write at address 0x00600018 (0xffffb6122018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84baa000. Read at address 0x00600018 (0xffff84baa018): 0x00000000 Write at address 0x00600018 (0xffff84baa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8250b000. Read at address 0x00600018 (0xffff8250b018): 0x00000000 Write at address 0x00600018 (0xffff8250b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa2994000. Read at address 0x00600018 (0xffffa2994018): 0x00000000 Write at address 0x00600018 (0xffffa2994018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb5dd9000. Read at address 0x00600018 (0xffffb5dd9018): 0x00000000 Write at address 0x00600018 (0xffffb5dd9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb37ec000. Read at address 0x00600018 (0xffffb37ec018): 0x00000000 Write at address 0x00600018 (0xffffb37ec018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa54f4000. Read at address 0x00600018 (0xffffa54f4018): 0x00000000 Write at address 0x00600018 (0xffffa54f4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb84df000. Read at address 0x00600018 (0xffffb84df018): 0x00000000 Write at address 0x00600018 (0xffffb84df018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff992b2000. Read at address 0x00600018 (0xffff992b2018): 0x00000000 Write at address 0x00600018 (0xffff992b2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8ed3b000. Read at address 0x00600018 (0xffff8ed3b018): 0x00000000 Write at address 0x00600018 (0xffff8ed3b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f8ea000. Read at address 0x00600018 (0xffff8f8ea018): 0x00000000 Write at address 0x00600018 (0xffff8f8ea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff870dc000. Read at address 0x00600018 (0xffff870dc018): 0x00000000 Write at address 0x00600018 (0xffff870dc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa8fa4000. Read at address 0x00600018 (0xffffa8fa4018): 0x00000000 Write at address 0x00600018 (0xffffa8fa4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 237 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fe0b000. Read at address 0x00600018 (0xffff7fe0b018): 0x00000000 Write at address 0x00600018 (0xffff7fe0b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbc7dd000. Read at address 0x00600018 (0xffffbc7dd018): 0x00000000 Write at address 0x00600018 (0xffffbc7dd018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4313000. Read at address 0x00600018 (0xffffa4313018): 0x00000000 Write at address 0x00600018 (0xffffa4313018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 ubi2:dml_code is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff90b46000. Read at address 0x00600018 (0xffff90b46018): 0x00000000 Write at address 0x00600018 (0xffff90b46018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82377000. Read at address 0x00600018 (0xffff82377018): 0x00000000 Write at address 0x00600018 (0xffff82377018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff849c1000. Read at address 0x00600018 (0xffff849c1018): 0x00000000 Write at address 0x00600018 (0xffff849c1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa20d6000. Read at address 0x00600018 (0xffffa20d6018): 0x00000000 Write at address 0x00600018 (0xffffa20d6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa826b000. Read at address 0x00600018 (0xffffa826b018): 0x00000000 Write at address 0x00600018 (0xffffa826b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff90e34000. Read at address 0x00600018 (0xffff90e34018): 0x00000000 Write at address 0x00600018 (0xffff90e34018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffab875000. Read at address 0x00600018 (0xffffab875018): 0x00000000 Write at address 0x00600018 (0xffffab875018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e9ea000. Read at address 0x00600018 (0xffff8e9ea018): 0x00000000 Write at address 0x00600018 (0xffff8e9ea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0ac8000. Read at address 0x00600018 (0xffffa0ac8018): 0x00000000 Write at address 0x00600018 (0xffffa0ac8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadd8b000. Read at address 0x00600018 (0xffffadd8b018): 0x00000000 Write at address 0x00600018 (0xffffadd8b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8ffb0000. Read at address 0x00600018 (0xffff8ffb0018): 0x00000000 Write at address 0x00600018 (0xffff8ffb0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8cee000. Read at address 0x00600018 (0xffffa8cee018): 0x00000000 Write at address 0x00600018 (0xffffa8cee018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen net.ipv6.conf.eth0.dad_transmits = 0 stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cb70000. Read at address 0x00600018 (0xffff9cb70018): 0x00000000 Write at address 0x00600018 (0xffff9cb70018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9ed56000. Read at address 0x00600018 (0xffff9ed56018): 0x00000000 Write at address 0x00600018 (0xffff9ed56018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa602b000. Read at address 0x00600018 (0xffffa602b018): 0x00000000 Write at address 0x00600018 (0xffffa602b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7196000. Read at address 0x00600018 (0xffffb7196018): 0x00000000 Write at address 0x00600018 (0xffffb7196018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9924d000. Read at address 0x00600018 (0xffff9924d018): 0x00000000 Write at address 0x00600018 (0xffff9924d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa4168000. Read at address 0x00600018 (0xffffa4168018): 0x00000000 Write at address 0x00600018 (0xffffa4168018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8254d000. Read at address 0x00600018 (0xffff8254d018): 0x00000000 Write at address 0x00600018 (0xffff8254d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb347f000. Read at address 0x00600018 (0xffffb347f018): 0x00000000 Write at address 0x00600018 (0xffffb347f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa297b000. Read at address 0x00600018 (0xffffa297b018): 0x00000000 Write at address 0x00600018 (0xffffa297b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8326d000. Read at address 0x00600018 (0xffff8326d018): 0x00000000 Write at address 0x00600018 (0xffff8326d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbec22000. Read at address 0x00600018 (0xffffbec22018): 0x00000000 Write at address 0x00600018 (0xffffbec22018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbec46000. Read at address 0x00600018 (0xffffbec46018): 0x00000000 Write at address 0x00600018 (0xffffbec46018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c085000. Read at address 0x00600018 (0xffff9c085018): 0x00000000 Write at address 0x00600018 (0xffff9c085018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff995b4000. Read at address 0x00600018 (0xffff995b4018): 0x00000000 Write at address 0x00600018 (0xffff995b4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa701c000. Read at address 0x00600018 (0xffffa701c018): 0x00000000 Write at address 0x00600018 (0xffffa701c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85ba6000. Read at address 0x00600018 (0xffff85ba6018): 0x00000000 Write at address 0x00600018 (0xffff85ba6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad983000. Read at address 0x00600018 (0xffffad983018): 0x00000000 Write at address 0x00600018 (0xffffad983018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf301000. Read at address 0x00600018 (0xffffaf301018): 0x00000000 Write at address 0x00600018 (0xffffaf301018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc3b7000. Read at address 0x00600018 (0xffffbc3b7018): 0x00000000 Write at address 0x00600018 (0xffffbc3b7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa7ab7000. Read at address 0x00600018 (0xffffa7ab7018): 0x00000000 Write at address 0x00600018 (0xffffa7ab7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa30ab000. Read at address 0x00600018 (0xffffa30ab018): 0x00000000 Write at address 0x00600018 (0xffffa30ab018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff84df7000. Read at address 0x00600018 (0xffff84df7018): 0x00000000 Write at address 0x00600018 (0xffff84df7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff94db2000. Read at address 0x00600018 (0xffff94db2018): 0x00000000 Write at address 0x00600018 (0xffff94db2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffab840000. Read at address 0x00600018 (0xffffab840018): 0x00000000 Write at address 0x00600018 (0xffffab840018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab59a000. Read at address 0x00600018 (0xffffab59a018): 0x00000000 Write at address 0x00600018 (0xffffab59a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82d85000. Read at address 0x00600018 (0xffff82d85018): 0x00000000 Write at address 0x00600018 (0xffff82d85018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0721000. Read at address 0x00600018 (0xffffa0721018): 0x00000000 Write at address 0x00600018 (0xffffa0721018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2656000. Read at address 0x00600018 (0xffffa2656018): 0x00000000 Write at address 0x00600018 (0xffffa2656018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa90f7000. Read at address 0x00600018 (0xffffa90f7018): 0x00000000 Write at address 0x00600018 (0xffffa90f7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffab780000. Read at address 0x00600018 (0xffffab780018): 0x00000000 Write at address 0x00600018 (0xffffab780018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb7641000. Read at address 0x00600018 (0xffffb7641018): 0x00000000 Write at address 0x00600018 (0xffffb7641018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffac115000. Read at address 0x00600018 (0xffffac115018): 0x00000000 Write at address 0x00600018 (0xffffac115018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3baf000. Read at address 0x00600018 (0xffffa3baf018): 0x00000000 Write at address 0x00600018 (0xffffa3baf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8f33a000. Read at address 0x00600018 (0xffff8f33a018): 0x00000000 Write at address 0x00600018 (0xffff8f33a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83e1e000. Read at address 0x00600018 (0xffff83e1e018): 0x00000000 Write at address 0x00600018 (0xffff83e1e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb6f95000. Read at address 0x00600018 (0xffffb6f95018): 0x00000000 Write at address 0x00600018 (0xffffb6f95018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff951eb000. Read at address 0x00600018 (0xffff951eb018): 0x00000000 Write at address 0x00600018 (0xffff951eb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbac75000. Read at address 0x00600018 (0xffffbac75018): 0x00000000 Write at address 0x00600018 (0xffffbac75018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7feb000. Read at address 0x00600018 (0xffffb7feb018): 0x00000000 Write at address 0x00600018 (0xffffb7feb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8e98000. Read at address 0x00600018 (0xffffb8e98018): 0x00000000 Write at address 0x00600018 (0xffffb8e98018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c8d9000. Read at address 0x00600018 (0xffff9c8d9018): 0x00000000 Write at address 0x00600018 (0xffff9c8d9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ce4c000. Read at address 0x00600018 (0xffff8ce4c018): 0x00000000 Write at address 0x00600018 (0xffff8ce4c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4920000. Read at address 0x00600018 (0xffffb4920018): 0x00000000 Write at address 0x00600018 (0xffffb4920018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb16ee000. Read at address 0x00600018 (0xffffb16ee018): 0x00000000 Write at address 0x00600018 (0xffffb16ee018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd763000. Read at address 0x00600018 (0xffffbd763018): 0x00000000 Write at address 0x00600018 (0xffffbd763018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff943c5000. Read at address 0x00600018 (0xffff943c5018): 0x00000000 Write at address 0x00600018 (0xffff943c5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2427000. Read at address 0x00600018 (0xffffa2427018): 0x00000000 Write at address 0x00600018 (0xffffa2427018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84106000. Read at address 0x00600018 (0xffff84106018): 0x00000000 Write at address 0x00600018 (0xffff84106018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb2a3b000. Read at address 0x00600018 (0xffffb2a3b018): 0x00000000 Write at address 0x00600018 (0xffffb2a3b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa0bf1000. Read at address 0x00600018 (0xffffa0bf1018): 0x00000000 Write at address 0x00600018 (0xffffa0bf1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa7504000. Read at address 0x00600018 (0xffffa7504018): 0x00000000 Write at address 0x00600018 (0xffffa7504018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8d6fa000. Read at address 0x00600018 (0xffff8d6fa018): 0x00000000 Write at address 0x00600018 (0xffff8d6fa018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa2088000. Read at address 0x00600018 (0xffffa2088018): 0x00000000 Write at address 0x00600018 (0xffffa2088018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba94d000. Read at address 0x00600018 (0xffffba94d018): 0x00000000 Write at address 0x00600018 (0xffffba94d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95a12000. Read at address 0x00600018 (0xffff95a12018): 0x00000000 Write at address 0x00600018 (0xffff95a12018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8a05f000. Read at address 0x00600018 (0xffff8a05f018): 0x00000000 Write at address 0x00600018 (0xffff8a05f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87e5c000. Read at address 0x00600018 (0xffff87e5c018): 0x00000000 Write at address 0x00600018 (0xffff87e5c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba593000. Read at address 0x00600018 (0xffffba593018): 0x00000000 Write at address 0x00600018 (0xffffba593018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2b07000. Read at address 0x00600018 (0xffffb2b07018): 0x00000000 Write at address 0x00600018 (0xffffb2b07018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3515000. Read at address 0x00600018 (0xffffa3515018): 0x00000000 Write at address 0x00600018 (0xffffa3515018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9a89b000. Read at address 0x00600018 (0xffff9a89b018): 0x00000000 Write at address 0x00600018 (0xffff9a89b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff832d4000. Read at address 0x00600018 (0xffff832d4018): 0x00000000 Write at address 0x00600018 (0xffff832d4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb8779000. Read at address 0x00600018 (0xffffb8779018): 0x00000000 Write at address 0x00600018 (0xffffb8779018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87f4f000. Read at address 0x00600018 (0xffff87f4f018): 0x00000000 Write at address 0x00600018 (0xffff87f4f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6065000. Read at address 0x00600018 (0xffffa6065018): 0x00000000 Write at address 0x00600018 (0xffffa6065018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9dcc3000. Read at address 0x00600018 (0xffff9dcc3018): 0x00000000 Write at address 0x00600018 (0xffff9dcc3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff926cf000. Read at address 0x00600018 (0xffff926cf018): 0x00000000 Write at address 0x00600018 (0xffff926cf018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa446f000. Read at address 0x00600018 (0xffffa446f018): 0x00000000 Write at address 0x00600018 (0xffffa446f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b02a000. Read at address 0x00600018 (0xffff9b02a018): 0x00000000 Write at address 0x00600018 (0xffff9b02a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff96b54000. Read at address 0x00600018 (0xffff96b54018): 0x00000000 Write at address 0x00600018 (0xffff96b54018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff914fe000. Read at address 0x00600018 (0xffff914fe018): 0x00000000 Write at address 0x00600018 (0xffff914fe018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae046000. Read at address 0x00600018 (0xffffae046018): 0x00000000 Write at address 0x00600018 (0xffffae046018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1a94000. Read at address 0x00600018 (0xffffa1a94018): 0x00000000 Write at address 0x00600018 (0xffffa1a94018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff826a5000. Read at address 0x00600018 (0xffff826a5018): 0x00000000 Write at address 0x00600018 (0xffff826a5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb759b000. Read at address 0x00600018 (0xffffb759b018): 0x00000000 Write at address 0x00600018 (0xffffb759b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b20e000. Read at address 0x00600018 (0xffff8b20e018): 0x00000000 Write at address 0x00600018 (0xffff8b20e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9acbf000. Read at address 0x00600018 (0xffff9acbf018): 0x00000000 Write at address 0x00600018 (0xffff9acbf018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d7d9000. Read at address 0x00600018 (0xffff8d7d9018): 0x00000000 Write at address 0x00600018 (0xffff8d7d9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8e71000. Read at address 0x00600018 (0xffffb8e71018): 0x00000000 Write at address 0x00600018 (0xffffb8e71018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86956000. Read at address 0x00600018 (0xffff86956018): 0x00000000 Write at address 0x00600018 (0xffff86956018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90d5d000. Read at address 0x00600018 (0xffff90d5d018): 0x00000000 Write at address 0x00600018 (0xffff90d5d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8363a000. Read at address 0x00600018 (0xffff8363a018): 0x00000000 Write at address 0x00600018 (0xffff8363a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83db3000. Read at address 0x00600018 (0xffff83db3018): 0x00000000 Write at address 0x00600018 (0xffff83db3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d5b4000. Read at address 0x00600018 (0xffff9d5b4018): 0x00000000 Write at address 0x00600018 (0xffff9d5b4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa4b11000. Read at address 0x00600018 (0xffffa4b11018): 0x00000000 Write at address 0x00600018 (0xffffa4b11018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8f4b000. Read at address 0x00600018 (0xffffa8f4b018): 0x00000000 Write at address 0x00600018 (0xffffa8f4b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb2c35000. Read at address 0x00600018 (0xffffb2c35018): 0x00000000 Write at address 0x00600018 (0xffffb2c35018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1109000. Read at address 0x00600018 (0xffffa1109018): 0x00000000 Write at address 0x00600018 (0xffffa1109018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8e5e0000. Read at address 0x00600018 (0xffff8e5e0018): 0x00000000 Write at address 0x00600018 (0xffff8e5e0018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa120e000. Read at address 0x00600018 (0xffffa120e018): 0x00000000 Write at address 0x00600018 (0xffffa120e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb213f000. Read at address 0x00600018 (0xffffb213f018): 0x00000000 Write at address 0x00600018 (0xffffb213f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaba9f000. Read at address 0x00600018 (0xffffaba9f018): 0x00000000 Write at address 0x00600018 (0xffffaba9f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa346d000. Read at address 0x00600018 (0xffffa346d018): 0x00000000 Write at address 0x00600018 (0xffffa346d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96134000. Read at address 0x00600018 (0xffff96134018): 0x00000000 Write at address 0x00600018 (0xffff96134018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93cc8000. Read at address 0x00600018 (0xffff93cc8018): 0x00000000 Write at address 0x00600018 (0xffff93cc8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87a43000. Read at address 0x00600018 (0xffff87a43018): 0x00000000 Write at address 0x00600018 (0xffff87a43018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd63b000. Read at address 0x00600018 (0xffffbd63b018): 0x00000000 Write at address 0x00600018 (0xffffbd63b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 net.ipv6.conf.all.disable_ipv6 = 0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e510000. Read at address 0x00600018 (0xffff9e510018): 0x00000000 Write at address 0x00600018 (0xffff9e510018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff93628000. Read at address 0x00600018 (0xffff93628018): 0x00000000 Write at address 0x00600018 (0xffff93628018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaef40000. Read at address 0x00600018 (0xffffaef40018): 0x00000000 Write at address 0x00600018 (0xffffaef40018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86f61000. Read at address 0x00600018 (0xffff86f61018): 0x00000000 Write at address 0x00600018 (0xffff86f61018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff82c34000. Read at address 0x00600018 (0xffff82c34018): 0x00000000 Write at address 0x00600018 (0xffff82c34018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82df2000. Read at address 0x00600018 (0xffff82df2018): 0x00000000 Write at address 0x00600018 (0xffff82df2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff826f3000. Read at address 0x00600018 (0xffff826f3018): 0x00000000 Write at address 0x00600018 (0xffff826f3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen net.ipv6.conf.all.disable_ipv6 = 0 stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6480000. Read at address 0x00600018 (0xffffb6480018): 0x00000000 Write at address 0x00600018 (0xffffb6480018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb12be000. Read at address 0x00600018 (0xffffb12be018): 0x00000000 Write at address 0x00600018 (0xffffb12be018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1ff9000. Read at address 0x00600018 (0xffffa1ff9018): 0x00000000 Write at address 0x00600018 (0xffffa1ff9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88e2b000. Read at address 0x00600018 (0xffff88e2b018): 0x00000000 Write at address 0x00600018 (0xffff88e2b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbcda9000. Read at address 0x00600018 (0xffffbcda9018): 0x00000000 Write at address 0x00600018 (0xffffbcda9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbe9fc000. Read at address 0x00600018 (0xffffbe9fc018): 0x00000000 Write at address 0x00600018 (0xffffbe9fc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8933000. Read at address 0x00600018 (0xffffb8933018): 0x00000000 Write at address 0x00600018 (0xffffb8933018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95bed000. Read at address 0x00600018 (0xffff95bed018): 0x00000000 Write at address 0x00600018 (0xffff95bed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff86ada000. Read at address 0x00600018 (0xffff86ada018): 0x00000000 Write at address 0x00600018 (0xffff86ada018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff862db000. Read at address 0x00600018 (0xffff862db018): 0x00000000 Write at address 0x00600018 (0xffff862db018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9000000. Read at address 0x00600018 (0xffffb9000018): 0x00000000 Write at address 0x00600018 (0xffffb9000018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7893000. Read at address 0x00600018 (0xffffa7893018): 0x00000000 Write at address 0x00600018 (0xffffa7893018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8e8d000. Read at address 0x00600018 (0xffffb8e8d018): 0x00000000 Write at address 0x00600018 (0xffffb8e8d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f72c000. Read at address 0x00600018 (0xffff8f72c018): 0x00000000 Write at address 0x00600018 (0xffff8f72c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaa155000. Read at address 0x00600018 (0xffffaa155018): 0x00000000 Write at address 0x00600018 (0xffffaa155018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd0ac000. Read at address 0x00600018 (0xffffbd0ac018): 0x00000000 Write at address 0x00600018 (0xffffbd0ac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa69c6000. Read at address 0x00600018 (0xffffa69c6018): 0x00000000 Write at address 0x00600018 (0xffffa69c6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9ffa3000. Read at address 0x00600018 (0xffff9ffa3018): 0x00000000 Write at address 0x00600018 (0xffff9ffa3018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff90c83000. Read at address 0x00600018 (0xffff90c83018): 0x00000000 Write at address 0x00600018 (0xffff90c83018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3f6d000. Read at address 0x00600018 (0xffffb3f6d018): 0x00000000 Write at address 0x00600018 (0xffffb3f6d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac57d000. Read at address 0x00600018 (0xffffac57d018): 0x00000000 Write at address 0x00600018 (0xffffac57d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb6bdf000. Read at address 0x00600018 (0xffffb6bdf018): 0x00000000 Write at address 0x00600018 (0xffffb6bdf018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80a77000. Read at address 0x00600018 (0xffff80a77018): 0x00000000 Write at address 0x00600018 (0xffff80a77018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fe09000. Read at address 0x00600018 (0xffff7fe09018): 0x00000000 Write at address 0x00600018 (0xffff7fe09018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff857f8000. Read at address 0x00600018 (0xffff857f8018): 0x00000000 Write at address 0x00600018 (0xffff857f8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86f5a000. Read at address 0x00600018 (0xffff86f5a018): 0x00000000 Write at address 0x00600018 (0xffff86f5a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa144b000. Read at address 0x00600018 (0xffffa144b018): 0x00000000 Write at address 0x00600018 (0xffffa144b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81e48000. Read at address 0x00600018 (0xffff81e48018): 0x00000000 Write at address 0x00600018 (0xffff81e48018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa6510000. Read at address 0x00600018 (0xffffa6510018): 0x00000000 Write at address 0x00600018 (0xffffa6510018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8f412000. Read at address 0x00600018 (0xffff8f412018): 0x00000000 Write at address 0x00600018 (0xffff8f412018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff7fa91000. Read at address 0x00600018 (0xffff7fa91018): 0x00000000 Write at address 0x00600018 (0xffff7fa91018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafcf5000. Read at address 0x00600018 (0xffffafcf5018): 0x00000000 Write at address 0x00600018 (0xffffafcf5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6bea000. Read at address 0x00600018 (0xffffb6bea018): 0x00000000 Write at address 0x00600018 (0xffffb6bea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbdfc4000. Read at address 0x00600018 (0xffffbdfc4018): 0x00000000 Write at address 0x00600018 (0xffffbdfc4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff97730000. Read at address 0x00600018 (0xffff97730018): 0x00000000 Write at address 0x00600018 (0xffff97730018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff95452000. Read at address 0x00600018 (0xffff95452018): 0x00000000 Write at address 0x00600018 (0xffff95452018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff977b3000. Read at address 0x00600018 (0xffff977b3018): 0x00000000 Write at address 0x00600018 (0xffff977b3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff878c5000. Read at address 0x00600018 (0xffff878c5018): 0x00000000 Write at address 0x00600018 (0xffff878c5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fcda000. Read at address 0x00600018 (0xffff8fcda018): 0x00000000 Write at address 0x00600018 (0xffff8fcda018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88a46000. Read at address 0x00600018 (0xffff88a46018): 0x00000000 Write at address 0x00600018 (0xffff88a46018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaa53a000. Read at address 0x00600018 (0xffffaa53a018): 0x00000000 Write at address 0x00600018 (0xffffaa53a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4483000. Read at address 0x00600018 (0xffffa4483018): 0x00000000 Write at address 0x00600018 (0xffffa4483018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88ad5000. Read at address 0x00600018 (0xffff88ad5018): 0x00000000 Write at address 0x00600018 (0xffff88ad5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf1af000. Read at address 0x00600018 (0xffffaf1af018): 0x00000000 Write at address 0x00600018 (0xffffaf1af018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb5f75000. Read at address 0x00600018 (0xffffb5f75018): 0x00000000 Write at address 0x00600018 (0xffffb5f75018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff83383000. Read at address 0x00600018 (0xffff83383018): 0x00000000 Write at address 0x00600018 (0xffff83383018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2a46000. Read at address 0x00600018 (0xffffa2a46018): 0x00000000 Write at address 0x00600018 (0xffffa2a46018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8da3c000. Read at address 0x00600018 (0xffff8da3c018): 0x00000000 Write at address 0x00600018 (0xffff8da3c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ad26000. Read at address 0x00600018 (0xffff9ad26018): 0x00000000 Write at address 0x00600018 (0xffff9ad26018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe3d2000. Read at address 0x00600018 (0xffffbe3d2018): 0x00000000 Write at address 0x00600018 (0xffffbe3d2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa95f6000. Read at address 0x00600018 (0xffffa95f6018): 0x00000000 Write at address 0x00600018 (0xffffa95f6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb87f1000. Read at address 0x00600018 (0xffffb87f1018): 0x00000000 Write at address 0x00600018 (0xffffb87f1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff99a81000. Read at address 0x00600018 (0xffff99a81018): 0x00000000 Write at address 0x00600018 (0xffff99a81018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3b51000. Read at address 0x00600018 (0xffffb3b51018): 0x00000000 Write at address 0x00600018 (0xffffb3b51018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi2:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8b43e000. Read at address 0x00600018 (0xffff8b43e018): 0x00000000 Write at address 0x00600018 (0xffff8b43e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f764000. Read at address 0x00600018 (0xffff9f764018): 0x00000000 Write at address 0x00600018 (0xffff9f764018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa8d45000. Read at address 0x00600018 (0xffffa8d45018): 0x00000000 Write at address 0x00600018 (0xffffa8d45018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa2e44000. Read at address 0x00600018 (0xffffa2e44018): 0x00000000 Write at address 0x00600018 (0xffffa2e44018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaeabc000. Read at address 0x00600018 (0xffffaeabc018): 0x00000000 Write at address 0x00600018 (0xffffaeabc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f7fa000. Read at address 0x00600018 (0xffff8f7fa018): 0x00000000 Write at address 0x00600018 (0xffff8f7fa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8447b000. Read at address 0x00600018 (0xffff8447b018): 0x00000000 Write at address 0x00600018 (0xffff8447b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f1b7000. Read at address 0x00600018 (0xffff9f1b7018): 0x00000000 Write at address 0x00600018 (0xffff9f1b7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f749000. Read at address 0x00600018 (0xffff9f749018): 0x00000000 Write at address 0x00600018 (0xffff9f749018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9e14c000. Read at address 0x00600018 (0xffff9e14c018): 0x00000000 Write at address 0x00600018 (0xffff9e14c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffae8a5000. Read at address 0x00600018 (0xffffae8a5018): 0x00000000 Write at address 0x00600018 (0xffffae8a5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c7a6000. Read at address 0x00600018 (0xffff9c7a6018): 0x00000000 Write at address 0x00600018 (0xffff9c7a6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbeb3c000. Read at address 0x00600018 (0xffffbeb3c018): 0x00000000 Write at address 0x00600018 (0xffffbeb3c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8593e000. Read at address 0x00600018 (0xffff8593e018): 0x00000000 Write at address 0x00600018 (0xffff8593e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9f2f000. Read at address 0x00600018 (0xffffb9f2f018): 0x00000000 Write at address 0x00600018 (0xffffb9f2f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbb7bb000. Read at address 0x00600018 (0xffffbb7bb018): 0x00000000 Write at address 0x00600018 (0xffffbb7bb018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6b41000. Read at address 0x00600018 (0xffffb6b41018): 0x00000000 Write at address 0x00600018 (0xffffb6b41018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91434000. Read at address 0x00600018 (0xffff91434018): 0x00000000 Write at address 0x00600018 (0xffff91434018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80c61000. Read at address 0x00600018 (0xffff80c61018): 0x00000000 Write at address 0x00600018 (0xffff80c61018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99a58000. Read at address 0x00600018 (0xffff99a58018): 0x00000000 Write at address 0x00600018 (0xffff99a58018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7e09000. Read at address 0x00600018 (0xffffa7e09018): 0x00000000 Write at address 0x00600018 (0xffffa7e09018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba8fe000. Read at address 0x00600018 (0xffffba8fe018): 0x00000000 Write at address 0x00600018 (0xffffba8fe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8f0f2000. Read at address 0x00600018 (0xffff8f0f2018): 0x00000000 Write at address 0x00600018 (0xffff8f0f2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98718000. Read at address 0x00600018 (0xffff98718018): 0x00000000 Write at address 0x00600018 (0xffff98718018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbd419000. Read at address 0x00600018 (0xffffbd419018): 0x00000000 Write at address 0x00600018 (0xffffbd419018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb89a1000. Read at address 0x00600018 (0xffffb89a1018): 0x00000000 Write at address 0x00600018 (0xffffb89a1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e7bc000. Read at address 0x00600018 (0xffff8e7bc018): 0x00000000 Write at address 0x00600018 (0xffff8e7bc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 ubi1:animations is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbee01000. Read at address 0x00600018 (0xffffbee01018): 0x00000000 Write at address 0x00600018 (0xffffbee01018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff935d8000. Read at address 0x00600018 (0xffff935d8018): 0x00000000 Write at address 0x00600018 (0xffff935d8018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1540000. Read at address 0x00600018 (0xffffa1540018): 0x00000000 Write at address 0x00600018 (0xffffa1540018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93479000. Read at address 0x00600018 (0xffff93479018): 0x00000000 Write at address 0x00600018 (0xffff93479018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa09c9000. Read at address 0x00600018 (0xffffa09c9018): 0x00000000 Write at address 0x00600018 (0xffffa09c9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa66f4000. Read at address 0x00600018 (0xffffa66f4018): 0x00000000 Write at address 0x00600018 (0xffffa66f4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87ddb000. Read at address 0x00600018 (0xffff87ddb018): 0x00000000 Write at address 0x00600018 (0xffff87ddb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8bc05000. Read at address 0x00600018 (0xffff8bc05018): 0x00000000 Write at address 0x00600018 (0xffff8bc05018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3f76000. Read at address 0x00600018 (0xffffb3f76018): 0x00000000 Write at address 0x00600018 (0xffffb3f76018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff93a51000. Read at address 0x00600018 (0xffff93a51018): 0x00000000 Write at address 0x00600018 (0xffff93a51018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf13c000. Read at address 0x00600018 (0xffffaf13c018): 0x00000000 Write at address 0x00600018 (0xffffaf13c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff945ce000. Read at address 0x00600018 (0xffff945ce018): 0x00000000 Write at address 0x00600018 (0xffff945ce018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff938b7000. Read at address 0x00600018 (0xffff938b7018): 0x00000000 Write at address 0x00600018 (0xffff938b7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99218000. Read at address 0x00600018 (0xffff99218018): 0x00000000 Write at address 0x00600018 (0xffff99218018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd092000. Read at address 0x00600018 (0xffffbd092018): 0x00000000 Write at address 0x00600018 (0xffffbd092018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffba184000. Read at address 0x00600018 (0xffffba184018): 0x00000000 Write at address 0x00600018 (0xffffba184018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff976b5000. Read at address 0x00600018 (0xffff976b5018): 0x00000000 Write at address 0x00600018 (0xffff976b5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 ubi2:dml_code is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9a386000. Read at address 0x00600018 (0xffff9a386018): 0x00000000 Write at address 0x00600018 (0xffff9a386018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89437000. Read at address 0x00600018 (0xffff89437018): 0x00000000 Write at address 0x00600018 (0xffff89437018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbc916000. Read at address 0x00600018 (0xffffbc916018): 0x00000000 Write at address 0x00600018 (0xffffbc916018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb4f90000. Read at address 0x00600018 (0xffffb4f90018): 0x00000000 Write at address 0x00600018 (0xffffb4f90018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff914b6000. Read at address 0x00600018 (0xffff914b6018): 0x00000000 Write at address 0x00600018 (0xffff914b6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff96254000. Read at address 0x00600018 (0xffff96254018): 0x00000000 Write at address 0x00600018 (0xffff96254018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97256000. Read at address 0x00600018 (0xffff97256018): 0x00000000 Write at address 0x00600018 (0xffff97256018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92196000. Read at address 0x00600018 (0xffff92196018): 0x00000000 Write at address 0x00600018 (0xffff92196018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf9d8000. Read at address 0x00600018 (0xffffaf9d8018): 0x00000000 Write at address 0x00600018 (0xffffaf9d8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88f3a000. Read at address 0x00600018 (0xffff88f3a018): 0x00000000 Write at address 0x00600018 (0xffff88f3a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb9a16000. Read at address 0x00600018 (0xffffb9a16018): 0x00000000 Write at address 0x00600018 (0xffffb9a16018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff82641000. Read at address 0x00600018 (0xffff82641018): 0x00000000 Write at address 0x00600018 (0xffff82641018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadc31000. Read at address 0x00600018 (0xffffadc31018): 0x00000000 Write at address 0x00600018 (0xffffadc31018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff80b99000. Read at address 0x00600018 (0xffff80b99018): 0x00000000 Write at address 0x00600018 (0xffff80b99018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbcd80000. Read at address 0x00600018 (0xffffbcd80018): 0x00000000 Write at address 0x00600018 (0xffffbcd80018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85803000. Read at address 0x00600018 (0xffff85803018): 0x00000000 Write at address 0x00600018 (0xffff85803018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbdb00000. Read at address 0x00600018 (0xffffbdb00018): 0x00000000 Write at address 0x00600018 (0xffffbdb00018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbcef6000. Read at address 0x00600018 (0xffffbcef6018): 0x00000000 Write at address 0x00600018 (0xffffbcef6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6a69000. Read at address 0x00600018 (0xffffb6a69018): 0x00000000 Write at address 0x00600018 (0xffffb6a69018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbdc3e000. Read at address 0x00600018 (0xffffbdc3e018): 0x00000000 Write at address 0x00600018 (0xffffbdc3e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8b3db000. Read at address 0x00600018 (0xffff8b3db018): 0x00000000 Write at address 0x00600018 (0xffff8b3db018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6535000. Read at address 0x00600018 (0xffffb6535018): 0x00000000 Write at address 0x00600018 (0xffffb6535018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff957a3000. Read at address 0x00600018 (0xffff957a3018): 0x00000000 Write at address 0x00600018 (0xffff957a3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb46d9000. Read at address 0x00600018 (0xffffb46d9018): 0x00000000 Write at address 0x00600018 (0xffffb46d9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaf5dc000. Read at address 0x00600018 (0xffffaf5dc018): 0x00000000 Write at address 0x00600018 (0xffffaf5dc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb21ec000. Read at address 0x00600018 (0xffffb21ec018): 0x00000000 Write at address 0x00600018 (0xffffb21ec018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbb46b000. Read at address 0x00600018 (0xffffbb46b018): 0x00000000 Write at address 0x00600018 (0xffffbb46b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbdda6000. Read at address 0x00600018 (0xffffbdda6018): 0x00000000 Write at address 0x00600018 (0xffffbdda6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8c956000. Read at address 0x00600018 (0xffff8c956018): 0x00000000 Write at address 0x00600018 (0xffff8c956018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bf5a000. Read at address 0x00600018 (0xffff9bf5a018): 0x00000000 Write at address 0x00600018 (0xffff9bf5a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a408000. Read at address 0x00600018 (0xffff8a408018): 0x00000000 Write at address 0x00600018 (0xffff8a408018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa7fc9000. Read at address 0x00600018 (0xffffa7fc9018): 0x00000000 Write at address 0x00600018 (0xffffa7fc9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4952000. Read at address 0x00600018 (0xffffb4952018): 0x00000000 Write at address 0x00600018 (0xffffb4952018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8d81000. Read at address 0x00600018 (0xffffb8d81018): 0x00000000 Write at address 0x00600018 (0xffffb8d81018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e599000. Read at address 0x00600018 (0xffff8e599018): 0x00000000 Write at address 0x00600018 (0xffff8e599018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9c28d000. Read at address 0x00600018 (0xffff9c28d018): 0x00000000 Write at address 0x00600018 (0xffff9c28d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff986e5000. Read at address 0x00600018 (0xffff986e5018): 0x00000000 Write at address 0x00600018 (0xffff986e5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaf419000. Read at address 0x00600018 (0xffffaf419018): 0x00000000 Write at address 0x00600018 (0xffffaf419018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80a57000. Read at address 0x00600018 (0xffff80a57018): 0x00000000 Write at address 0x00600018 (0xffff80a57018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ad47000. Read at address 0x00600018 (0xffff8ad47018): 0x00000000 Write at address 0x00600018 (0xffff8ad47018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffac65a000. Read at address 0x00600018 (0xffffac65a018): 0x00000000 Write at address 0x00600018 (0xffffac65a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaae95000. Read at address 0x00600018 (0xffffaae95018): 0x00000000 Write at address 0x00600018 (0xffffaae95018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff958f3000. Read at address 0x00600018 (0xffff958f3018): 0x00000000 Write at address 0x00600018 (0xffff958f3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe63a000. Read at address 0x00600018 (0xffffbe63a018): 0x00000000 Write at address 0x00600018 (0xffffbe63a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa433f000. Read at address 0x00600018 (0xffffa433f018): 0x00000000 Write at address 0x00600018 (0xffffa433f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbd94d000. Read at address 0x00600018 (0xffffbd94d018): 0x00000000 Write at address 0x00600018 (0xffffbd94d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb83a0000. Read at address 0x00600018 (0xffffb83a0018): 0x00000000 Write at address 0x00600018 (0xffffb83a0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8e3ad000. Read at address 0x00600018 (0xffff8e3ad018): 0x00000000 Write at address 0x00600018 (0xffff8e3ad018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa146f000. Read at address 0x00600018 (0xffffa146f018): 0x00000000 Write at address 0x00600018 (0xffffa146f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93088000. Read at address 0x00600018 (0xffff93088018): 0x00000000 Write at address 0x00600018 (0xffff93088018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe357000. Read at address 0x00600018 (0xffffbe357018): 0x00000000 Write at address 0x00600018 (0xffffbe357018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0548000. Read at address 0x00600018 (0xffffa0548018): 0x00000000 Write at address 0x00600018 (0xffffa0548018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9858c000. Read at address 0x00600018 (0xffff9858c018): 0x00000000 Write at address 0x00600018 (0xffff9858c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9deae000. Read at address 0x00600018 (0xffff9deae018): 0x00000000 Write at address 0x00600018 (0xffff9deae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe022000. Read at address 0x00600018 (0xffffbe022018): 0x00000000 Write at address 0x00600018 (0xffffbe022018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff818d0000. Read at address 0x00600018 (0xffff818d0018): 0x00000000 Write at address 0x00600018 (0xffff818d0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa015c000. Read at address 0x00600018 (0xffffa015c018): 0x00000000 Write at address 0x00600018 (0xffffa015c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f969000. Read at address 0x00600018 (0xffff9f969018): 0x00000000 Write at address 0x00600018 (0xffff9f969018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8a718000. Read at address 0x00600018 (0xffff8a718018): 0x00000000 Write at address 0x00600018 (0xffff8a718018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4349000. Read at address 0x00600018 (0xffffb4349018): 0x00000000 Write at address 0x00600018 (0xffffb4349018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9db0a000. Read at address 0x00600018 (0xffff9db0a018): 0x00000000 Write at address 0x00600018 (0xffff9db0a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbbfd9000. Read at address 0x00600018 (0xffffbbfd9018): 0x00000000 Write at address 0x00600018 (0xffffbbfd9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9d98000. Read at address 0x00600018 (0xffffb9d98018): 0x00000000 Write at address 0x00600018 (0xffffb9d98018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff966f2000. Read at address 0x00600018 (0xffff966f2018): 0x00000000 Write at address 0x00600018 (0xffff966f2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa748b000. Read at address 0x00600018 (0xffffa748b018): 0x00000000 Write at address 0x00600018 (0xffffa748b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb68dd000. Read at address 0x00600018 (0xffffb68dd018): 0x00000000 Write at address 0x00600018 (0xffffb68dd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9be13000. Read at address 0x00600018 (0xffff9be13018): 0x00000000 Write at address 0x00600018 (0xffff9be13018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff86df5000. Read at address 0x00600018 (0xffff86df5018): 0x00000000 Write at address 0x00600018 (0xffff86df5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9480000. Read at address 0x00600018 (0xffffb9480018): 0x00000000 Write at address 0x00600018 (0xffffb9480018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa9194000. Read at address 0x00600018 (0xffffa9194018): 0x00000000 Write at address 0x00600018 (0xffffa9194018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95bae000. Read at address 0x00600018 (0xffff95bae018): 0x00000000 Write at address 0x00600018 (0xffff95bae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bfa3000. Read at address 0x00600018 (0xffff9bfa3018): 0x00000000 Write at address 0x00600018 (0xffff9bfa3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9edd4000. Read at address 0x00600018 (0xffff9edd4018): 0x00000000 Write at address 0x00600018 (0xffff9edd4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa2367000. Read at address 0x00600018 (0xffffa2367018): 0x00000000 Write at address 0x00600018 (0xffffa2367018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98391000. Read at address 0x00600018 (0xffff98391018): 0x00000000 Write at address 0x00600018 (0xffff98391018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99092000. Read at address 0x00600018 (0xffff99092018): 0x00000000 Write at address 0x00600018 (0xffff99092018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e4f4000. Read at address 0x00600018 (0xffff9e4f4018): 0x00000000 Write at address 0x00600018 (0xffff9e4f4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80202000. Read at address 0x00600018 (0xffff80202018): 0x00000000 Write at address 0x00600018 (0xffff80202018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff94781000. Read at address 0x00600018 (0xffff94781018): 0x00000000 Write at address 0x00600018 (0xffff94781018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff958b2000. Read at address 0x00600018 (0xffff958b2018): 0x00000000 Write at address 0x00600018 (0xffff958b2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa4f92000. Read at address 0x00600018 (0xffffa4f92018): 0x00000000 Write at address 0x00600018 (0xffffa4f92018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff7fc9d000. Read at address 0x00600018 (0xffff7fc9d018): 0x00000000 Write at address 0x00600018 (0xffff7fc9d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff96ede000. Read at address 0x00600018 (0xffff96ede018): 0x00000000 Write at address 0x00600018 (0xffff96ede018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb0a54000. Read at address 0x00600018 (0xffffb0a54018): 0x00000000 Write at address 0x00600018 (0xffffb0a54018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff98457000. Read at address 0x00600018 (0xffff98457018): 0x00000000 Write at address 0x00600018 (0xffff98457018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff85454000. Read at address 0x00600018 (0xffff85454018): 0x00000000 Write at address 0x00600018 (0xffff85454018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8b6e6000. Read at address 0x00600018 (0xffff8b6e6018): 0x00000000 Write at address 0x00600018 (0xffff8b6e6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7ef4000. Read at address 0x00600018 (0xffffb7ef4018): 0x00000000 Write at address 0x00600018 (0xffffb7ef4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba64d000. Read at address 0x00600018 (0xffffba64d018): 0x00000000 Write at address 0x00600018 (0xffffba64d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9fae9000. Read at address 0x00600018 (0xffff9fae9018): 0x00000000 Write at address 0x00600018 (0xffff9fae9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa8bd1000. Read at address 0x00600018 (0xffffa8bd1018): 0x00000000 Write at address 0x00600018 (0xffffa8bd1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff83bad000. Read at address 0x00600018 (0xffff83bad018): 0x00000000 Write at address 0x00600018 (0xffff83bad018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff90e3b000. Read at address 0x00600018 (0xffff90e3b018): 0x00000000 Write at address 0x00600018 (0xffff90e3b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff96c3c000. Read at address 0x00600018 (0xffff96c3c018): 0x00000000 Write at address 0x00600018 (0xffff96c3c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83cb0000. Read at address 0x00600018 (0xffff83cb0018): 0x00000000 Write at address 0x00600018 (0xffff83cb0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa174c000. Read at address 0x00600018 (0xffffa174c018): 0x00000000 Write at address 0x00600018 (0xffffa174c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb8d01000. Read at address 0x00600018 (0xffffb8d01018): 0x00000000 Write at address 0x00600018 (0xffffb8d01018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a8f9000. Read at address 0x00600018 (0xffff8a8f9018): 0x00000000 Write at address 0x00600018 (0xffff8a8f9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa32e9000. Read at address 0x00600018 (0xffffa32e9018): 0x00000000 Write at address 0x00600018 (0xffffa32e9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9da69000. Read at address 0x00600018 (0xffff9da69018): 0x00000000 Write at address 0x00600018 (0xffff9da69018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe5a5000. Read at address 0x00600018 (0xffffbe5a5018): 0x00000000 Write at address 0x00600018 (0xffffbe5a5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb775e000. Read at address 0x00600018 (0xffffb775e018): 0x00000000 Write at address 0x00600018 (0xffffb775e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff836f1000. Read at address 0x00600018 (0xffff836f1018): 0x00000000 Write at address 0x00600018 (0xffff836f1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa1ee7000. Read at address 0x00600018 (0xffffa1ee7018): 0x00000000 Write at address 0x00600018 (0xffffa1ee7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82e79000. Read at address 0x00600018 (0xffff82e79018): 0x00000000 Write at address 0x00600018 (0xffff82e79018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffad0e5000. Read at address 0x00600018 (0xffffad0e5018): 0x00000000 Write at address 0x00600018 (0xffffad0e5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffae95b000. Read at address 0x00600018 (0xffffae95b018): 0x00000000 Write at address 0x00600018 (0xffffae95b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9870b000. Read at address 0x00600018 (0xffff9870b018): 0x00000000 Write at address 0x00600018 (0xffff9870b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9d76b000. Read at address 0x00600018 (0xffff9d76b018): 0x00000000 Write at address 0x00600018 (0xffff9d76b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff95ac6000. Read at address 0x00600018 (0xffff95ac6018): 0x00000000 Write at address 0x00600018 (0xffff95ac6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbf0c9000. Read at address 0x00600018 (0xffffbf0c9018): 0x00000000 Write at address 0x00600018 (0xffffbf0c9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1a68000. Read at address 0x00600018 (0xffffa1a68018): 0x00000000 Write at address 0x00600018 (0xffffa1a68018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8e146000. Read at address 0x00600018 (0xffff8e146018): 0x00000000 Write at address 0x00600018 (0xffff8e146018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8de8000. Read at address 0x00600018 (0xffffb8de8018): 0x00000000 Write at address 0x00600018 (0xffffb8de8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7d98000. Read at address 0x00600018 (0xffffa7d98018): 0x00000000 Write at address 0x00600018 (0xffffa7d98018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff863c6000. Read at address 0x00600018 (0xffff863c6018): 0x00000000 Write at address 0x00600018 (0xffff863c6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9ccc4000. Read at address 0x00600018 (0xffff9ccc4018): 0x00000000 Write at address 0x00600018 (0xffff9ccc4018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ab2a000. Read at address 0x00600018 (0xffff8ab2a018): 0x00000000 Write at address 0x00600018 (0xffff8ab2a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff91425000. Read at address 0x00600018 (0xffff91425018): 0x00000000 Write at address 0x00600018 (0xffff91425018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbda77000. Read at address 0x00600018 (0xffffbda77018): 0x00000000 Write at address 0x00600018 (0xffffbda77018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff926ba000. Read at address 0x00600018 (0xffff926ba018): 0x00000000 Write at address 0x00600018 (0xffff926ba018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa9454000. Read at address 0x00600018 (0xffffa9454018): 0x00000000 Write at address 0x00600018 (0xffffa9454018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8515e000. Read at address 0x00600018 (0xffff8515e018): 0x00000000 Write at address 0x00600018 (0xffff8515e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b464000. Read at address 0x00600018 (0xffff8b464018): 0x00000000 Write at address 0x00600018 (0xffff8b464018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8d73000. Read at address 0x00600018 (0xffffb8d73018): 0x00000000 Write at address 0x00600018 (0xffffb8d73018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa460d000. Read at address 0x00600018 (0xffffa460d018): 0x00000000 Write at address 0x00600018 (0xffffa460d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi1:textures is mounted. ubi0:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffabbf4000. Read at address 0x00600018 (0xffffabbf4018): 0x00000000 Write at address 0x00600018 (0xffffabbf4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb690f000. Read at address 0x00600018 (0xffffb690f018): 0x00000000 Write at address 0x00600018 (0xffffb690f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff91b0c000. Read at address 0x00600018 (0xffff91b0c018): 0x00000000 Write at address 0x00600018 (0xffff91b0c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1ac6000. Read at address 0x00600018 (0xffffb1ac6018): 0x00000000 Write at address 0x00600018 (0xffffb1ac6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87d41000. Read at address 0x00600018 (0xffff87d41018): 0x00000000 Write at address 0x00600018 (0xffff87d41018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95df8000. Read at address 0x00600018 (0xffff95df8018): 0x00000000 Write at address 0x00600018 (0xffff95df8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafee7000. Read at address 0x00600018 (0xffffafee7018): 0x00000000 Write at address 0x00600018 (0xffffafee7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffba4f2000. Read at address 0x00600018 (0xffffba4f2018): 0x00000000 Write at address 0x00600018 (0xffffba4f2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7f9fd000. Read at address 0x00600018 (0xffff7f9fd018): 0x00000000 Write at address 0x00600018 (0xffff7f9fd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2bc8000. Read at address 0x00600018 (0xffffb2bc8018): 0x00000000 Write at address 0x00600018 (0xffffb2bc8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f691000. Read at address 0x00600018 (0xffff8f691018): 0x00000000 Write at address 0x00600018 (0xffff8f691018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa7546000. Read at address 0x00600018 (0xffffa7546018): 0x00000000 Write at address 0x00600018 (0xffffa7546018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa6852000. Read at address 0x00600018 (0xffffa6852018): 0x00000000 Write at address 0x00600018 (0xffffa6852018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8347b000. Read at address 0x00600018 (0xffff8347b018): 0x00000000 Write at address 0x00600018 (0xffff8347b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8eff6000. Read at address 0x00600018 (0xffff8eff6018): 0x00000000 Write at address 0x00600018 (0xffff8eff6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9bba0000. Read at address 0x00600018 (0xffff9bba0018): 0x00000000 Write at address 0x00600018 (0xffff9bba0018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4845000. Read at address 0x00600018 (0xffffa4845018): 0x00000000 Write at address 0x00600018 (0xffffa4845018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97f9a000. Read at address 0x00600018 (0xffff97f9a018): 0x00000000 Write at address 0x00600018 (0xffff97f9a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d4e2000. Read at address 0x00600018 (0xffff9d4e2018): 0x00000000 Write at address 0x00600018 (0xffff9d4e2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffac7dc000. Read at address 0x00600018 (0xffffac7dc018): 0x00000000 Write at address 0x00600018 (0xffffac7dc018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe1cc000. Read at address 0x00600018 (0xffffbe1cc018): 0x00000000 Write at address 0x00600018 (0xffffbe1cc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb572e000. Read at address 0x00600018 (0xffffb572e018): 0x00000000 Write at address 0x00600018 (0xffffb572e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffacbcf000. Read at address 0x00600018 (0xffffacbcf018): 0x00000000 Write at address 0x00600018 (0xffffacbcf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb77e6000. Read at address 0x00600018 (0xffffb77e6018): 0x00000000 Write at address 0x00600018 (0xffffb77e6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7971000. Read at address 0x00600018 (0xffffb7971018): 0x00000000 Write at address 0x00600018 (0xffffb7971018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90e24000. Read at address 0x00600018 (0xffff90e24018): 0x00000000 Write at address 0x00600018 (0xffff90e24018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa175000. Read at address 0x00600018 (0xffffaa175018): 0x00000000 Write at address 0x00600018 (0xffffaa175018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88f8d000. Read at address 0x00600018 (0xffff88f8d018): 0x00000000 Write at address 0x00600018 (0xffff88f8d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi2:textures is mounted. ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a476000. Read at address 0x00600018 (0xffff9a476018): 0x00000000 Write at address 0x00600018 (0xffff9a476018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85ce6000. Read at address 0x00600018 (0xffff85ce6018): 0x00000000 Write at address 0x00600018 (0xffff85ce6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff98958000. Read at address 0x00600018 (0xffff98958018): 0x00000000 Write at address 0x00600018 (0xffff98958018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9239f000. Read at address 0x00600018 (0xffff9239f018): 0x00000000 Write at address 0x00600018 (0xffff9239f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff89056000. Read at address 0x00600018 (0xffff89056018): 0x00000000 Write at address 0x00600018 (0xffff89056018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9943f000. Read at address 0x00600018 (0xffff9943f018): 0x00000000 Write at address 0x00600018 (0xffff9943f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists mtd32 attached net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 ubi2:dml_code is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa484c000. Read at address 0x00600018 (0xffffa484c018): 0x00000000 Write at address 0x00600018 (0xffffa484c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9eb8f000. Read at address 0x00600018 (0xffff9eb8f018): 0x00000000 Write at address 0x00600018 (0xffff9eb8f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7147000. Read at address 0x00600018 (0xffffa7147018): 0x00000000 Write at address 0x00600018 (0xffffa7147018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 220 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb589a000. Read at address 0x00600018 (0xffffb589a018): 0x00000000 Write at address 0x00600018 (0xffffb589a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3b9e000. Read at address 0x00600018 (0xffffb3b9e018): 0x00000000 Write at address 0x00600018 (0xffffb3b9e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff921a3000. Read at address 0x00600018 (0xffff921a3018): 0x00000000 Write at address 0x00600018 (0xffff921a3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8cab1000. Read at address 0x00600018 (0xffff8cab1018): 0x00000000 Write at address 0x00600018 (0xffff8cab1018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8dea1000. Read at address 0x00600018 (0xffff8dea1018): 0x00000000 Write at address 0x00600018 (0xffff8dea1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6f83000. Read at address 0x00600018 (0xffffa6f83018): 0x00000000 Write at address 0x00600018 (0xffffa6f83018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8b961000. Read at address 0x00600018 (0xffff8b961018): 0x00000000 Write at address 0x00600018 (0xffff8b961018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9b723000. Read at address 0x00600018 (0xffff9b723018): 0x00000000 Write at address 0x00600018 (0xffff9b723018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb688000. Read at address 0x00600018 (0xffffbb688018): 0x00000000 Write at address 0x00600018 (0xffffbb688018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa72d0000. Read at address 0x00600018 (0xffffa72d0018): 0x00000000 Write at address 0x00600018 (0xffffa72d0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f679000. Read at address 0x00600018 (0xffff8f679018): 0x00000000 Write at address 0x00600018 (0xffff8f679018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3fd2000. Read at address 0x00600018 (0xffffb3fd2018): 0x00000000 Write at address 0x00600018 (0xffffb3fd2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaea37000. Read at address 0x00600018 (0xffffaea37018): 0x00000000 Write at address 0x00600018 (0xffffaea37018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaca89000. Read at address 0x00600018 (0xffffaca89018): 0x00000000 Write at address 0x00600018 (0xffffaca89018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa43eb000. Read at address 0x00600018 (0xffffa43eb018): 0x00000000 Write at address 0x00600018 (0xffffa43eb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b46e000. Read at address 0x00600018 (0xffff9b46e018): 0x00000000 Write at address 0x00600018 (0xffff9b46e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbbcbe000. Read at address 0x00600018 (0xffffbbcbe018): 0x00000000 Write at address 0x00600018 (0xffffbbcbe018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff80002000. Read at address 0x00600018 (0xffff80002018): 0x00000000 Write at address 0x00600018 (0xffff80002018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97629000. Read at address 0x00600018 (0xffff97629018): 0x00000000 Write at address 0x00600018 (0xffff97629018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff904a3000. Read at address 0x00600018 (0xffff904a3018): 0x00000000 Write at address 0x00600018 (0xffff904a3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81132000. Read at address 0x00600018 (0xffff81132018): 0x00000000 Write at address 0x00600018 (0xffff81132018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbbeb5000. Read at address 0x00600018 (0xffffbbeb5018): 0x00000000 Write at address 0x00600018 (0xffffbbeb5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa2e5f000. Read at address 0x00600018 (0xffffa2e5f018): 0x00000000 Write at address 0x00600018 (0xffffa2e5f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb77a9000. Read at address 0x00600018 (0xffffb77a9018): 0x00000000 Write at address 0x00600018 (0xffffb77a9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff868c8000. Read at address 0x00600018 (0xffff868c8018): 0x00000000 Write at address 0x00600018 (0xffff868c8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e57f000. Read at address 0x00600018 (0xffff9e57f018): 0x00000000 Write at address 0x00600018 (0xffff9e57f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff94e3b000. Read at address 0x00600018 (0xffff94e3b018): 0x00000000 Write at address 0x00600018 (0xffff94e3b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8823a000. Read at address 0x00600018 (0xffff8823a018): 0x00000000 Write at address 0x00600018 (0xffff8823a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9ab50000. Read at address 0x00600018 (0xffff9ab50018): 0x00000000 Write at address 0x00600018 (0xffff9ab50018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d239000. Read at address 0x00600018 (0xffff9d239018): 0x00000000 Write at address 0x00600018 (0xffff9d239018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xfffface5b000. Read at address 0x00600018 (0xfffface5b018): 0x00000000 Write at address 0x00600018 (0xfffface5b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95789000. Read at address 0x00600018 (0xffff95789018): 0x00000000 Write at address 0x00600018 (0xffff95789018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8c0bc000. Read at address 0x00600018 (0xffff8c0bc018): 0x00000000 Write at address 0x00600018 (0xffff8c0bc018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb0bcd000. Read at address 0x00600018 (0xffffb0bcd018): 0x00000000 Write at address 0x00600018 (0xffffb0bcd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9d9ef000. Read at address 0x00600018 (0xffff9d9ef018): 0x00000000 Write at address 0x00600018 (0xffff9d9ef018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85a65000. Read at address 0x00600018 (0xffff85a65018): 0x00000000 Write at address 0x00600018 (0xffff85a65018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81f58000. Read at address 0x00600018 (0xffff81f58018): 0x00000000 Write at address 0x00600018 (0xffff81f58018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8a014000. Read at address 0x00600018 (0xffff8a014018): 0x00000000 Write at address 0x00600018 (0xffff8a014018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91a7d000. Read at address 0x00600018 (0xffff91a7d018): 0x00000000 Write at address 0x00600018 (0xffff91a7d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e175000. Read at address 0x00600018 (0xffff9e175018): 0x00000000 Write at address 0x00600018 (0xffff9e175018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9495a000. Read at address 0x00600018 (0xffff9495a018): 0x00000000 Write at address 0x00600018 (0xffff9495a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff86ea5000. Read at address 0x00600018 (0xffff86ea5018): 0x00000000 Write at address 0x00600018 (0xffff86ea5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96596000. Read at address 0x00600018 (0xffff96596018): 0x00000000 Write at address 0x00600018 (0xffff96596018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8237d000. Read at address 0x00600018 (0xffff8237d018): 0x00000000 Write at address 0x00600018 (0xffff8237d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89372000. Read at address 0x00600018 (0xffff89372018): 0x00000000 Write at address 0x00600018 (0xffff89372018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94a69000. Read at address 0x00600018 (0xffff94a69018): 0x00000000 Write at address 0x00600018 (0xffff94a69018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb05f7000. Read at address 0x00600018 (0xffffb05f7018): 0x00000000 Write at address 0x00600018 (0xffffb05f7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaaaf5000. Read at address 0x00600018 (0xffffaaaf5018): 0x00000000 Write at address 0x00600018 (0xffffaaaf5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff90368000. Read at address 0x00600018 (0xffff90368018): 0x00000000 Write at address 0x00600018 (0xffff90368018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91c5e000. Read at address 0x00600018 (0xffff91c5e018): 0x00000000 Write at address 0x00600018 (0xffff91c5e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89679000. Read at address 0x00600018 (0xffff89679018): 0x00000000 Write at address 0x00600018 (0xffff89679018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffad1ac000. Read at address 0x00600018 (0xffffad1ac018): 0x00000000 Write at address 0x00600018 (0xffffad1ac018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7cee000. Read at address 0x00600018 (0xffffa7cee018): 0x00000000 Write at address 0x00600018 (0xffffa7cee018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c636000. Read at address 0x00600018 (0xffff8c636018): 0x00000000 Write at address 0x00600018 (0xffff8c636018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb840d000. Read at address 0x00600018 (0xffffb840d018): 0x00000000 Write at address 0x00600018 (0xffffb840d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb053d000. Read at address 0x00600018 (0xffffb053d018): 0x00000000 Write at address 0x00600018 (0xffffb053d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97a8b000. Read at address 0x00600018 (0xffff97a8b018): 0x00000000 Write at address 0x00600018 (0xffff97a8b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start 1778 GC [0] 1839 GC [1] 1911 GC [2] 1977 GC [3] 2040 GC [4] Esel version: 3.102.0.0-IAA10.27 2101 GC [5] 2168 GC [6] 2242 GC [7] 2319 GC [8] 2390 GC [9] 2499 GC [10] 2598 GC [11] 2752 GC [12] DML res1: 0 2888 GC [13] 3060 GC [14] 3232 GC [15] 3248 GC [16] Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6eb0000. Read at address 0x00600018 (0xffffa6eb0018): 0x00000000 Write at address 0x00600018 (0xffffa6eb0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaf0d1000. Read at address 0x00600018 (0xffffaf0d1018): 0x00000000 Write at address 0x00600018 (0xffffaf0d1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa76dd000. Read at address 0x00600018 (0xffffa76dd018): 0x00000000 Write at address 0x00600018 (0xffffa76dd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2f67000. Read at address 0x00600018 (0xffffb2f67018): 0x00000000 Write at address 0x00600018 (0xffffb2f67018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff870c7000. Read at address 0x00600018 (0xffff870c7018): 0x00000000 Write at address 0x00600018 (0xffff870c7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff85299000. Read at address 0x00600018 (0xffff85299018): 0x00000000 Write at address 0x00600018 (0xffff85299018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83ed8000. Read at address 0x00600018 (0xffff83ed8018): 0x00000000 Write at address 0x00600018 (0xffff83ed8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80d1f000. Read at address 0x00600018 (0xffff80d1f018): 0x00000000 Write at address 0x00600018 (0xffff80d1f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb1bf6000. Read at address 0x00600018 (0xffffb1bf6018): 0x00000000 Write at address 0x00600018 (0xffffb1bf6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. ubi1:textures is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac2d4000. Read at address 0x00600018 (0xffffac2d4018): 0x00000000 Write at address 0x00600018 (0xffffac2d4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff801f6000. Read at address 0x00600018 (0xffff801f6018): 0x00000000 Write at address 0x00600018 (0xffff801f6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 net.ipv6.conf.all.disable_ipv6 = 0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85bf7000. Read at address 0x00600018 (0xffff85bf7018): 0x00000000 Write at address 0x00600018 (0xffff85bf7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8388000. Read at address 0x00600018 (0xffffb8388018): 0x00000000 Write at address 0x00600018 (0xffffb8388018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa95e8000. Read at address 0x00600018 (0xffffa95e8018): 0x00000000 Write at address 0x00600018 (0xffffa95e8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff80481000. Read at address 0x00600018 (0xffff80481018): 0x00000000 Write at address 0x00600018 (0xffff80481018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa629d000. Read at address 0x00600018 (0xffffa629d018): 0x00000000 Write at address 0x00600018 (0xffffa629d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9670c000. Read at address 0x00600018 (0xffff9670c018): 0x00000000 Write at address 0x00600018 (0xffff9670c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa793c000. Read at address 0x00600018 (0xffffa793c018): 0x00000000 Write at address 0x00600018 (0xffffa793c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bf05000. Read at address 0x00600018 (0xffff9bf05018): 0x00000000 Write at address 0x00600018 (0xffff9bf05018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa1eab000. Read at address 0x00600018 (0xffffa1eab018): 0x00000000 Write at address 0x00600018 (0xffffa1eab018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff98591000. Read at address 0x00600018 (0xffff98591018): 0x00000000 Write at address 0x00600018 (0xffff98591018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff93b80000. Read at address 0x00600018 (0xffff93b80018): 0x00000000 Write at address 0x00600018 (0xffff93b80018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbc6f4000. Read at address 0x00600018 (0xffffbc6f4018): 0x00000000 Write at address 0x00600018 (0xffffbc6f4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7293000. Read at address 0x00600018 (0xffffb7293018): 0x00000000 Write at address 0x00600018 (0xffffb7293018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff88328000. Read at address 0x00600018 (0xffff88328018): 0x00000000 Write at address 0x00600018 (0xffff88328018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8c6e9000. Read at address 0x00600018 (0xffff8c6e9018): 0x00000000 Write at address 0x00600018 (0xffff8c6e9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff867fa000. Read at address 0x00600018 (0xffff867fa018): 0x00000000 Write at address 0x00600018 (0xffff867fa018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 236 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa8f1f000. Read at address 0x00600018 (0xffffa8f1f018): 0x00000000 Write at address 0x00600018 (0xffffa8f1f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85d01000. net.ipv6.conf.all.addr_gen_mode = 0 Read at address 0x00600018 (0xffff85d01018): 0x00000000 Write at address 0x00600018 (0xffff85d01018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 236 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi1:animations is mounted. mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9cf6e000. Read at address 0x00600018 (0xffff9cf6e018): 0x00000000 Write at address 0x00600018 (0xffff9cf6e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ec52000. Read at address 0x00600018 (0xffff8ec52018): 0x00000000 Write at address 0x00600018 (0xffff8ec52018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa53aa000. Read at address 0x00600018 (0xffffa53aa018): 0x00000000 Write at address 0x00600018 (0xffffa53aa018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf472000. Read at address 0x00600018 (0xffffaf472018): 0x00000000 Write at address 0x00600018 (0xffffaf472018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb686e000. Read at address 0x00600018 (0xffffb686e018): 0x00000000 Write at address 0x00600018 (0xffffb686e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f9ec000. Read at address 0x00600018 (0xffff9f9ec018): 0x00000000 Write at address 0x00600018 (0xffff9f9ec018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc041000. Read at address 0x00600018 (0xffffbc041018): 0x00000000 Write at address 0x00600018 (0xffffbc041018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a148000. Read at address 0x00600018 (0xffff9a148018): 0x00000000 Write at address 0x00600018 (0xffff9a148018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbc56b000. net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Read at address 0x00600018 (0xffffbc56b018): 0x00000000 Write at address 0x00600018 (0xffffbc56b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3e32000. Read at address 0x00600018 (0xffffb3e32018): 0x00000000 Write at address 0x00600018 (0xffffb3e32018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa947f000. Read at address 0x00600018 (0xffffa947f018): 0x00000000 Write at address 0x00600018 (0xffffa947f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb373d000. Read at address 0x00600018 (0xffffb373d018): 0x00000000 Write at address 0x00600018 (0xffffb373d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbc5d5000. Read at address 0x00600018 (0xffffbc5d5018): 0x00000000 Write at address 0x00600018 (0xffffbc5d5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffad3c0000. Read at address 0x00600018 (0xffffad3c0018): 0x00000000 Write at address 0x00600018 (0xffffad3c0018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d92f000. Read at address 0x00600018 (0xffff8d92f018): 0x00000000 Write at address 0x00600018 (0xffff8d92f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb53ef000. Read at address 0x00600018 (0xffffb53ef018): 0x00000000 Write at address 0x00600018 (0xffffb53ef018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff89619000. Read at address 0x00600018 (0xffff89619018): 0x00000000 Write at address 0x00600018 (0xffff89619018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d44d000. Read at address 0x00600018 (0xffff8d44d018): 0x00000000 Write at address 0x00600018 (0xffff8d44d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81540000. Read at address 0x00600018 (0xffff81540018): 0x00000000 Write at address 0x00600018 (0xffff81540018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbcdb9000. Read at address 0x00600018 (0xffffbcdb9018): 0x00000000 Write at address 0x00600018 (0xffffbcdb9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9557a000. Read at address 0x00600018 (0xffff9557a018): 0x00000000 Write at address 0x00600018 (0xffff9557a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7e5d000. Read at address 0x00600018 (0xffffb7e5d018): 0x00000000 Write at address 0x00600018 (0xffffb7e5d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa7a8d000. Read at address 0x00600018 (0xffffa7a8d018): 0x00000000 Write at address 0x00600018 (0xffffa7a8d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff82b56000. Read at address 0x00600018 (0xffff82b56018): 0x00000000 Write at address 0x00600018 (0xffff82b56018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98d42000. Read at address 0x00600018 (0xffff98d42018): 0x00000000 Write at address 0x00600018 (0xffff98d42018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff86794000. Read at address 0x00600018 (0xffff86794018): 0x00000000 Write at address 0x00600018 (0xffff86794018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb892b000. Read at address 0x00600018 (0xffffb892b018): 0x00000000 Write at address 0x00600018 (0xffffb892b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa4bf5000. Read at address 0x00600018 (0xffffa4bf5018): 0x00000000 Write at address 0x00600018 (0xffffa4bf5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86f98000. Read at address 0x00600018 (0xffff86f98018): 0x00000000 Write at address 0x00600018 (0xffff86f98018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7522000. Read at address 0x00600018 (0xffffb7522018): 0x00000000 Write at address 0x00600018 (0xffffb7522018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac8a8000. Read at address 0x00600018 (0xffffac8a8018): 0x00000000 Write at address 0x00600018 (0xffffac8a8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8c8d000. Read at address 0x00600018 (0xffffb8c8d018): 0x00000000 Write at address 0x00600018 (0xffffb8c8d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabb39000. Read at address 0x00600018 (0xffffabb39018): 0x00000000 Write at address 0x00600018 (0xffffabb39018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81bd1000. Read at address 0x00600018 (0xffff81bd1018): 0x00000000 Write at address 0x00600018 (0xffff81bd1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9ea43000. Read at address 0x00600018 (0xffff9ea43018): 0x00000000 Write at address 0x00600018 (0xffff9ea43018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ac24000. Read at address 0x00600018 (0xffff9ac24018): 0x00000000 Write at address 0x00600018 (0xffff9ac24018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc2e0000. Read at address 0x00600018 (0xffffbc2e0018): 0x00000000 Write at address 0x00600018 (0xffffbc2e0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaeb4b000. Read at address 0x00600018 (0xffffaeb4b018): 0x00000000 Write at address 0x00600018 (0xffffaeb4b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90157000. Read at address 0x00600018 (0xffff90157018): 0x00000000 Write at address 0x00600018 (0xffff90157018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88c74000. Read at address 0x00600018 (0xffff88c74018): 0x00000000 Write at address 0x00600018 (0xffff88c74018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff842b9000. Read at address 0x00600018 (0xffff842b9018): 0x00000000 Write at address 0x00600018 (0xffff842b9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb7c66000. Read at address 0x00600018 (0xffffb7c66018): 0x00000000 Write at address 0x00600018 (0xffffb7c66018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb028f000. Read at address 0x00600018 (0xffffb028f018): 0x00000000 Write at address 0x00600018 (0xffffb028f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb15ab000. Read at address 0x00600018 (0xffffb15ab018): 0x00000000 Write at address 0x00600018 (0xffffb15ab018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff910b8000. Read at address 0x00600018 (0xffff910b8018): 0x00000000 Write at address 0x00600018 (0xffff910b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95c94000. Read at address 0x00600018 (0xffff95c94018): 0x00000000 Write at address 0x00600018 (0xffff95c94018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85a6b000. Read at address 0x00600018 (0xffff85a6b018): 0x00000000 Write at address 0x00600018 (0xffff85a6b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8b29d000. Read at address 0x00600018 (0xffff8b29d018): 0x00000000 Write at address 0x00600018 (0xffff8b29d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb3812000. Read at address 0x00600018 (0xffffb3812018): 0x00000000 Write at address 0x00600018 (0xffffb3812018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa2547000. Read at address 0x00600018 (0xffffa2547018): 0x00000000 Write at address 0x00600018 (0xffffa2547018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ede6000. Read at address 0x00600018 (0xffff9ede6018): 0x00000000 Write at address 0x00600018 (0xffff9ede6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaec6c000. Read at address 0x00600018 (0xffffaec6c018): 0x00000000 Write at address 0x00600018 (0xffffaec6c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb83cc000. Read at address 0x00600018 (0xffffb83cc018): 0x00000000 Write at address 0x00600018 (0xffffb83cc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81d5d000. Read at address 0x00600018 (0xffff81d5d018): 0x00000000 Write at address 0x00600018 (0xffff81d5d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 220 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb074c000. Read at address 0x00600018 (0xffffb074c018): 0x00000000 Write at address 0x00600018 (0xffffb074c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa90b6000. Read at address 0x00600018 (0xffffa90b6018): 0x00000000 Write at address 0x00600018 (0xffffa90b6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2ebc000. Read at address 0x00600018 (0xffffa2ebc018): 0x00000000 Write at address 0x00600018 (0xffffa2ebc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb406d000. Read at address 0x00600018 (0xffffb406d018): 0x00000000 Write at address 0x00600018 (0xffffb406d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffad8d8000. Read at address 0x00600018 (0xffffad8d8018): 0x00000000 Write at address 0x00600018 (0xffffad8d8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93de9000. Read at address 0x00600018 (0xffff93de9018): 0x00000000 Write at address 0x00600018 (0xffff93de9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96d4f000. Read at address 0x00600018 (0xffff96d4f018): 0x00000000 Write at address 0x00600018 (0xffff96d4f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83371000. Read at address 0x00600018 (0xffff83371018): 0x00000000 Write at address 0x00600018 (0xffff83371018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa269a000. Read at address 0x00600018 (0xffffa269a018): 0x00000000 Write at address 0x00600018 (0xffffa269a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8b556000. Read at address 0x00600018 (0xffff8b556018): 0x00000000 Write at address 0x00600018 (0xffff8b556018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84aca000. Read at address 0x00600018 (0xffff84aca018): 0x00000000 Write at address 0x00600018 (0xffff84aca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87372000. Read at address 0x00600018 (0xffff87372018): 0x00000000 Write at address 0x00600018 (0xffff87372018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb55c3000. Read at address 0x00600018 (0xffffb55c3018): 0x00000000 Write at address 0x00600018 (0xffffb55c3018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad9ca000. Read at address 0x00600018 (0xffffad9ca018): 0x00000000 Write at address 0x00600018 (0xffffad9ca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8dc9c000. Read at address 0x00600018 (0xffff8dc9c018): 0x00000000 Write at address 0x00600018 (0xffff8dc9c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi1:dml_code is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2434000. Read at address 0x00600018 (0xffffa2434018): 0x00000000 Write at address 0x00600018 (0xffffa2434018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa15fa000. Read at address 0x00600018 (0xffffa15fa018): 0x00000000 Write at address 0x00600018 (0xffffa15fa018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9d15d000. Read at address 0x00600018 (0xffff9d15d018): 0x00000000 Write at address 0x00600018 (0xffff9d15d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa56fd000. Read at address 0x00600018 (0xffffa56fd018): 0x00000000 Write at address 0x00600018 (0xffffa56fd018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa88bc000. Read at address 0x00600018 (0xffffa88bc018): 0x00000000 Write at address 0x00600018 (0xffffa88bc018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa3bee000. Read at address 0x00600018 (0xffffa3bee018): 0x00000000 Write at address 0x00600018 (0xffffa3bee018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85091000. Read at address 0x00600018 (0xffff85091018): 0x00000000 Write at address 0x00600018 (0xffff85091018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa81a7000. Read at address 0x00600018 (0xffffa81a7018): 0x00000000 Write at address 0x00600018 (0xffffa81a7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff837bd000. Read at address 0x00600018 (0xffff837bd018): 0x00000000 Write at address 0x00600018 (0xffff837bd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff984e3000. Read at address 0x00600018 (0xffff984e3018): 0x00000000 Write at address 0x00600018 (0xffff984e3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9f1c7000. Read at address 0x00600018 (0xffff9f1c7018): 0x00000000 Write at address 0x00600018 (0xffff9f1c7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff96a84000. Read at address 0x00600018 (0xffff96a84018): 0x00000000 Write at address 0x00600018 (0xffff96a84018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 238 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb045d000. Read at address 0x00600018 (0xffffb045d018): 0x00000000 Write at address 0x00600018 (0xffffb045d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaeca9000. Read at address 0x00600018 (0xffffaeca9018): 0x00000000 Write at address 0x00600018 (0xffffaeca9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa75ec000. Read at address 0x00600018 (0xffffa75ec018): 0x00000000 Write at address 0x00600018 (0xffffa75ec018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb3529000. Read at address 0x00600018 (0xffffb3529018): 0x00000000 Write at address 0x00600018 (0xffffb3529018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbf51f000. Read at address 0x00600018 (0xffffbf51f018): 0x00000000 Write at address 0x00600018 (0xffffbf51f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c829000. Read at address 0x00600018 (0xffff9c829018): 0x00000000 Write at address 0x00600018 (0xffff9c829018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2b88000. Read at address 0x00600018 (0xffffb2b88018): 0x00000000 Write at address 0x00600018 (0xffffb2b88018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa20cc000. Read at address 0x00600018 (0xffffa20cc018): 0x00000000 Write at address 0x00600018 (0xffffa20cc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff911e2000. Read at address 0x00600018 (0xffff911e2018): 0x00000000 Write at address 0x00600018 (0xffff911e2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb02da000. Read at address 0x00600018 (0xffffb02da018): 0x00000000 Write at address 0x00600018 (0xffffb02da018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9b556000. Read at address 0x00600018 (0xffff9b556018): 0x00000000 Write at address 0x00600018 (0xffff9b556018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8bddd000. Read at address 0x00600018 (0xffff8bddd018): 0x00000000 Write at address 0x00600018 (0xffff8bddd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb3c7b000. Read at address 0x00600018 (0xffffb3c7b018): 0x00000000 Write at address 0x00600018 (0xffffb3c7b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99404000. Read at address 0x00600018 (0xffff99404018): 0x00000000 Write at address 0x00600018 (0xffff99404018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb60b9000. Read at address 0x00600018 (0xffffb60b9018): 0x00000000 Write at address 0x00600018 (0xffffb60b9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb046d000. Read at address 0x00600018 (0xffffb046d018): 0x00000000 Write at address 0x00600018 (0xffffb046d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadc23000. Read at address 0x00600018 (0xffffadc23018): 0x00000000 Write at address 0x00600018 (0xffffadc23018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f694000. Read at address 0x00600018 (0xffff9f694018): 0x00000000 Write at address 0x00600018 (0xffff9f694018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff830eb000. Read at address 0x00600018 (0xffff830eb018): 0x00000000 Write at address 0x00600018 (0xffff830eb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ac9c000. Read at address 0x00600018 (0xffff9ac9c018): 0x00000000 Write at address 0x00600018 (0xffff9ac9c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbccb7000. Read at address 0x00600018 (0xffffbccb7018): 0x00000000 Write at address 0x00600018 (0xffffbccb7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cdd3000. Read at address 0x00600018 (0xffff9cdd3018): 0x00000000 Write at address 0x00600018 (0xffff9cdd3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaf66b000. Read at address 0x00600018 (0xffffaf66b018): 0x00000000 Write at address 0x00600018 (0xffffaf66b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff84be0000. Read at address 0x00600018 (0xffff84be0018): 0x00000000 Write at address 0x00600018 (0xffff84be0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fd22000. Read at address 0x00600018 (0xffff8fd22018): 0x00000000 Write at address 0x00600018 (0xffff8fd22018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafe11000. Read at address 0x00600018 (0xffffafe11018): 0x00000000 Write at address 0x00600018 (0xffffafe11018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9fd6e000. Read at address 0x00600018 (0xffff9fd6e018): 0x00000000 Write at address 0x00600018 (0xffff9fd6e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8f087000. Read at address 0x00600018 (0xffff8f087018): 0x00000000 Write at address 0x00600018 (0xffff8f087018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb74cf000. Read at address 0x00600018 (0xffffb74cf018): 0x00000000 Write at address 0x00600018 (0xffffb74cf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff935a6000. Read at address 0x00600018 (0xffff935a6018): 0x00000000 Write at address 0x00600018 (0xffff935a6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1816000. Read at address 0x00600018 (0xffffb1816018): 0x00000000 Write at address 0x00600018 (0xffffb1816018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafff0000. Read at address 0x00600018 (0xffffafff0018): 0x00000000 Write at address 0x00600018 (0xffffafff0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa594e000. Read at address 0x00600018 (0xffffa594e018): 0x00000000 Write at address 0x00600018 (0xffffa594e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi1:textures is mounted. ubi0:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffae013000. Read at address 0x00600018 (0xffffae013018): 0x00000000 Write at address 0x00600018 (0xffffae013018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa59bb000. Read at address 0x00600018 (0xffffa59bb018): 0x00000000 Write at address 0x00600018 (0xffffa59bb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbc0f8000. Read at address 0x00600018 (0xffffbc0f8018): 0x00000000 Write at address 0x00600018 (0xffffbc0f8018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a729000. Read at address 0x00600018 (0xffff8a729018): 0x00000000 Write at address 0x00600018 (0xffff8a729018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb40c3000. Read at address 0x00600018 (0xffffb40c3018): 0x00000000 Write at address 0x00600018 (0xffffb40c3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe88b000. Read at address 0x00600018 (0xffffbe88b018): 0x00000000 Write at address 0x00600018 (0xffffbe88b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87292000. Read at address 0x00600018 (0xffff87292018): 0x00000000 Write at address 0x00600018 (0xffff87292018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9adea000. Read at address 0x00600018 (0xffff9adea018): 0x00000000 Write at address 0x00600018 (0xffff9adea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d9cf000. Read at address 0x00600018 (0xffff9d9cf018): 0x00000000 Write at address 0x00600018 (0xffff9d9cf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9accb000. Read at address 0x00600018 (0xffff9accb018): 0x00000000 Write at address 0x00600018 (0xffff9accb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9c6ff000. Read at address 0x00600018 (0xffff9c6ff018): 0x00000000 Write at address 0x00600018 (0xffff9c6ff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0663000. Read at address 0x00600018 (0xffffb0663018): 0x00000000 Write at address 0x00600018 (0xffffb0663018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9571000. Read at address 0x00600018 (0xffffb9571018): 0x00000000 Write at address 0x00600018 (0xffffb9571018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb34cd000. Read at address 0x00600018 (0xffffb34cd018): 0x00000000 Write at address 0x00600018 (0xffffb34cd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa0167000. Read at address 0x00600018 (0xffffa0167018): 0x00000000 Write at address 0x00600018 (0xffffa0167018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbd99d000. Read at address 0x00600018 (0xffffbd99d018): 0x00000000 Write at address 0x00600018 (0xffffbd99d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8689f000. Read at address 0x00600018 (0xffff8689f018): 0x00000000 Write at address 0x00600018 (0xffff8689f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb45d7000. Read at address 0x00600018 (0xffffb45d7018): 0x00000000 Write at address 0x00600018 (0xffffb45d7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9c9e7000. Read at address 0x00600018 (0xffff9c9e7018): 0x00000000 Write at address 0x00600018 (0xffff9c9e7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7ffa3000. Read at address 0x00600018 (0xffff7ffa3018): 0x00000000 Write at address 0x00600018 (0xffff7ffa3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85509000. Read at address 0x00600018 (0xffff85509018): 0x00000000 Write at address 0x00600018 (0xffff85509018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff96289000. Read at address 0x00600018 (0xffff96289018): 0x00000000 Write at address 0x00600018 (0xffff96289018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85106000. Read at address 0x00600018 (0xffff85106018): 0x00000000 Write at address 0x00600018 (0xffff85106018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81772000. Read at address 0x00600018 (0xffff81772018): 0x00000000 Write at address 0x00600018 (0xffff81772018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi1:animations is mounted. ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa64b5000. Read at address 0x00600018 (0xffffa64b5018): 0x00000000 Write at address 0x00600018 (0xffffa64b5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa56e2000. Read at address 0x00600018 (0xffffa56e2018): 0x00000000 Write at address 0x00600018 (0xffffa56e2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf735000. Read at address 0x00600018 (0xffffaf735018): 0x00000000 Write at address 0x00600018 (0xffffaf735018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa85e9000. Read at address 0x00600018 (0xffffa85e9018): 0x00000000 Write at address 0x00600018 (0xffffa85e9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb01a4000. Read at address 0x00600018 (0xffffb01a4018): 0x00000000 Write at address 0x00600018 (0xffffb01a4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa354b000. Read at address 0x00600018 (0xffffa354b018): 0x00000000 Write at address 0x00600018 (0xffffa354b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. net.ipv6.conf.all.addr_gen_mode = 0 Memory mapped at address 0xffffa5fb2000. Read at address 0x00600018 (0xffffa5fb2018): 0x00000000 Write at address 0x00600018 (0xffffa5fb2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8fcc6000. Read at address 0x00600018 (0xffff8fcc6018): 0x00000000 Write at address 0x00600018 (0xffff8fcc6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fffb000. Read at address 0x00600018 (0xffff7fffb018): 0x00000000 Write at address 0x00600018 (0xffff7fffb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffada15000. Read at address 0x00600018 (0xffffada15018): 0x00000000 Write at address 0x00600018 (0xffffada15018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff81f6e000. Read at address 0x00600018 (0xffff81f6e018): 0x00000000 Write at address 0x00600018 (0xffff81f6e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff88390000. Read at address 0x00600018 (0xffff88390018): 0x00000000 Write at address 0x00600018 (0xffff88390018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0d59000. Read at address 0x00600018 (0xffffb0d59018): 0x00000000 Write at address 0x00600018 (0xffffb0d59018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8dc63000. Read at address 0x00600018 (0xffff8dc63018): 0x00000000 Write at address 0x00600018 (0xffff8dc63018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1db7000. Read at address 0x00600018 (0xffffa1db7018): 0x00000000 Write at address 0x00600018 (0xffffa1db7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbed68000. Read at address 0x00600018 (0xffffbed68018): 0x00000000 Write at address 0x00600018 (0xffffbed68018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8079a000. Read at address 0x00600018 (0xffff8079a018): 0x00000000 Write at address 0x00600018 (0xffff8079a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabc81000. Read at address 0x00600018 (0xffffabc81018): 0x00000000 Write at address 0x00600018 (0xffffabc81018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2a6f000. Read at address 0x00600018 (0xffffa2a6f018): 0x00000000 Write at address 0x00600018 (0xffffa2a6f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff811ea000. Read at address 0x00600018 (0xffff811ea018): 0x00000000 Write at address 0x00600018 (0xffff811ea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa580f000. Read at address 0x00600018 (0xffffa580f018): 0x00000000 Write at address 0x00600018 (0xffffa580f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffaf307000. Read at address 0x00600018 (0xffffaf307018): 0x00000000 Write at address 0x00600018 (0xffffaf307018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7c38000. Read at address 0x00600018 (0xffffb7c38018): 0x00000000 Write at address 0x00600018 (0xffffb7c38018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e8bc000. Read at address 0x00600018 (0xffff9e8bc018): 0x00000000 Write at address 0x00600018 (0xffff9e8bc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb7880000. Read at address 0x00600018 (0xffffb7880018): 0x00000000 Write at address 0x00600018 (0xffffb7880018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2826000. Read at address 0x00600018 (0xffffb2826018): 0x00000000 Write at address 0x00600018 (0xffffb2826018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa35ba000. Read at address 0x00600018 (0xffffa35ba018): 0x00000000 Write at address 0x00600018 (0xffffa35ba018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8bb47000. Read at address 0x00600018 (0xffff8bb47018): 0x00000000 Write at address 0x00600018 (0xffff8bb47018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi1:dml_code is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaebe6000. Read at address 0x00600018 (0xffffaebe6018): 0x00000000 Write at address 0x00600018 (0xffffaebe6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6e4b000. Read at address 0x00600018 (0xffffa6e4b018): 0x00000000 Write at address 0x00600018 (0xffffa6e4b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffba444000. Read at address 0x00600018 (0xffffba444018): 0x00000000 Write at address 0x00600018 (0xffffba444018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8e2a2000. Read at address 0x00600018 (0xffff8e2a2018): 0x00000000 Write at address 0x00600018 (0xffff8e2a2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff826f3000. Read at address 0x00600018 (0xffff826f3018): 0x00000000 Write at address 0x00600018 (0xffff826f3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e243000. Read at address 0x00600018 (0xffff8e243018): 0x00000000 Write at address 0x00600018 (0xffff8e243018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff888e2000. Read at address 0x00600018 (0xffff888e2018): 0x00000000 Write at address 0x00600018 (0xffff888e2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f7c5000. Read at address 0x00600018 (0xffff9f7c5018): 0x00000000 Write at address 0x00600018 (0xffff9f7c5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff937b3000. Read at address 0x00600018 (0xffff937b3018): 0x00000000 Write at address 0x00600018 (0xffff937b3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff836ff000. Read at address 0x00600018 (0xffff836ff018): 0x00000000 Write at address 0x00600018 (0xffff836ff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8db2e000. Read at address 0x00600018 (0xffff8db2e018): 0x00000000 Write at address 0x00600018 (0xffff8db2e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83373000. Read at address 0x00600018 (0xffff83373018): 0x00000000 Write at address 0x00600018 (0xffff83373018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f73e000. Read at address 0x00600018 (0xffff8f73e018): 0x00000000 Write at address 0x00600018 (0xffff8f73e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff95b53000. Read at address 0x00600018 (0xffff95b53018): 0x00000000 Write at address 0x00600018 (0xffff95b53018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffabcc4000. Read at address 0x00600018 (0xffffabcc4018): 0x00000000 Write at address 0x00600018 (0xffffabcc4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1558000. Read at address 0x00600018 (0xffffb1558018): 0x00000000 Write at address 0x00600018 (0xffffb1558018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9578a000. Read at address 0x00600018 (0xffff9578a018): 0x00000000 Write at address 0x00600018 (0xffff9578a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9e2e3000. Read at address 0x00600018 (0xffff9e2e3018): 0x00000000 Write at address 0x00600018 (0xffff9e2e3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95ff1000. Read at address 0x00600018 (0xffff95ff1018): 0x00000000 Write at address 0x00600018 (0xffff95ff1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa0518000. Read at address 0x00600018 (0xffffa0518018): 0x00000000 Write at address 0x00600018 (0xffffa0518018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f5c5000. Read at address 0x00600018 (0xffff8f5c5018): 0x00000000 Write at address 0x00600018 (0xffff8f5c5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbde37000. Read at address 0x00600018 (0xffffbde37018): 0x00000000 Write at address 0x00600018 (0xffffbde37018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa7011000. Read at address 0x00600018 (0xffffa7011018): 0x00000000 Write at address 0x00600018 (0xffffa7011018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 net.ipv6.conf.all.disable_ipv6 = 0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa44f9000. Read at address 0x00600018 (0xffffa44f9018): 0x00000000 Write at address 0x00600018 (0xffffa44f9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1274000. Read at address 0x00600018 (0xffffb1274018): 0x00000000 Write at address 0x00600018 (0xffffb1274018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3805000. Read at address 0x00600018 (0xffffb3805018): 0x00000000 Write at address 0x00600018 (0xffffb3805018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4a85000. Read at address 0x00600018 (0xffffb4a85018): 0x00000000 Write at address 0x00600018 (0xffffb4a85018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8eb34000. Read at address 0x00600018 (0xffff8eb34018): 0x00000000 Write at address 0x00600018 (0xffff8eb34018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4845000. Read at address 0x00600018 (0xffffb4845018): 0x00000000 Write at address 0x00600018 (0xffffb4845018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97f4c000. Read at address 0x00600018 (0xffff97f4c018): 0x00000000 Write at address 0x00600018 (0xffff97f4c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8868a000. Read at address 0x00600018 (0xffff8868a018): 0x00000000 Write at address 0x00600018 (0xffff8868a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa240a000. Read at address 0x00600018 (0xffffa240a018): 0x00000000 Write at address 0x00600018 (0xffffa240a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba60d000. Read at address 0x00600018 (0xffffba60d018): 0x00000000 Write at address 0x00600018 (0xffffba60d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ea45000. Read at address 0x00600018 (0xffff9ea45018): 0x00000000 Write at address 0x00600018 (0xffff9ea45018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4609000. Read at address 0x00600018 (0xffffb4609018): 0x00000000 Write at address 0x00600018 (0xffffb4609018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9fb77000. Read at address 0x00600018 (0xffff9fb77018): 0x00000000 Write at address 0x00600018 (0xffff9fb77018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff965c4000. Read at address 0x00600018 (0xffff965c4018): 0x00000000 Write at address 0x00600018 (0xffff965c4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff93875000. Read at address 0x00600018 (0xffff93875018): 0x00000000 Write at address 0x00600018 (0xffff93875018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fc83000. Read at address 0x00600018 (0xffff7fc83018): 0x00000000 Write at address 0x00600018 (0xffff7fc83018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2ff2000. Read at address 0x00600018 (0xffffb2ff2018): 0x00000000 Write at address 0x00600018 (0xffffb2ff2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8425e000. Read at address 0x00600018 (0xffff8425e018): 0x00000000 Write at address 0x00600018 (0xffff8425e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff85ebc000. Read at address 0x00600018 (0xffff85ebc018): 0x00000000 Write at address 0x00600018 (0xffff85ebc018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8adf1000. Read at address 0x00600018 (0xffff8adf1018): 0x00000000 Write at address 0x00600018 (0xffff8adf1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbe2e7000. Read at address 0x00600018 (0xffffbe2e7018): 0x00000000 Write at address 0x00600018 (0xffffbe2e7018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b33a000. Read at address 0x00600018 (0xffff9b33a018): 0x00000000 Write at address 0x00600018 (0xffff9b33a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff987dd000. Read at address 0x00600018 (0xffff987dd018): 0x00000000 Write at address 0x00600018 (0xffff987dd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff958a7000. Read at address 0x00600018 (0xffff958a7018): 0x00000000 Write at address 0x00600018 (0xffff958a7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa85c3000. Read at address 0x00600018 (0xffffa85c3018): 0x00000000 Write at address 0x00600018 (0xffffa85c3018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadc0a000. Read at address 0x00600018 (0xffffadc0a018): 0x00000000 Write at address 0x00600018 (0xffffadc0a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbda59000. Read at address 0x00600018 (0xffffbda59018): 0x00000000 Write at address 0x00600018 (0xffffbda59018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b30c000. Read at address 0x00600018 (0xffff8b30c018): 0x00000000 Write at address 0x00600018 (0xffff8b30c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8029e000. Read at address 0x00600018 (0xffff8029e018): 0x00000000 Write at address 0x00600018 (0xffff8029e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff91bba000. Read at address 0x00600018 (0xffff91bba018): 0x00000000 Write at address 0x00600018 (0xffff91bba018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff833e6000. Read at address 0x00600018 (0xffff833e6018): 0x00000000 Write at address 0x00600018 (0xffff833e6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff93eb6000. Read at address 0x00600018 (0xffff93eb6018): 0x00000000 Write at address 0x00600018 (0xffff93eb6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86d8b000. Read at address 0x00600018 (0xffff86d8b018): 0x00000000 Write at address 0x00600018 (0xffff86d8b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a2fa000. Read at address 0x00600018 (0xffff8a2fa018): 0x00000000 Write at address 0x00600018 (0xffff8a2fa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1c10000. Read at address 0x00600018 (0xffffb1c10018): 0x00000000 Write at address 0x00600018 (0xffffb1c10018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff873f0000. Read at address 0x00600018 (0xffff873f0018): 0x00000000 Write at address 0x00600018 (0xffff873f0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b168000. Read at address 0x00600018 (0xffff8b168018): 0x00000000 Write at address 0x00600018 (0xffff8b168018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe901000. Read at address 0x00600018 (0xffffbe901018): 0x00000000 Write at address 0x00600018 (0xffffbe901018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadde1000. Read at address 0x00600018 (0xffffadde1018): 0x00000000 Write at address 0x00600018 (0xffffadde1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba0eb000. Read at address 0x00600018 (0xffffba0eb018): 0x00000000 Write at address 0x00600018 (0xffffba0eb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb1db3000. Read at address 0x00600018 (0xffffb1db3018): 0x00000000 Write at address 0x00600018 (0xffffb1db3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6214000. Read at address 0x00600018 (0xffffa6214018): 0x00000000 Write at address 0x00600018 (0xffffa6214018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88719000. Read at address 0x00600018 (0xffff88719018): 0x00000000 Write at address 0x00600018 (0xffff88719018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbf142000. Read at address 0x00600018 (0xffffbf142018): 0x00000000 Write at address 0x00600018 (0xffffbf142018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8ea5d000. Read at address 0x00600018 (0xffff8ea5d018): 0x00000000 Write at address 0x00600018 (0xffff8ea5d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa7cbe000. Read at address 0x00600018 (0xffffa7cbe018): 0x00000000 Write at address 0x00600018 (0xffffa7cbe018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb606b000. Read at address 0x00600018 (0xffffb606b018): 0x00000000 Write at address 0x00600018 (0xffffb606b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff950b1000. Read at address 0x00600018 (0xffff950b1018): 0x00000000 Write at address 0x00600018 (0xffff950b1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa299c000. Read at address 0x00600018 (0xffffa299c018): 0x00000000 Write at address 0x00600018 (0xffffa299c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb15ef000. Read at address 0x00600018 (0xffffb15ef018): 0x00000000 Write at address 0x00600018 (0xffffb15ef018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff96f58000. Read at address 0x00600018 (0xffff96f58018): 0x00000000 Write at address 0x00600018 (0xffff96f58018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98a45000. Read at address 0x00600018 (0xffff98a45018): 0x00000000 Write at address 0x00600018 (0xffff98a45018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81be6000. Read at address 0x00600018 (0xffff81be6018): 0x00000000 Write at address 0x00600018 (0xffff81be6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4349000. Read at address 0x00600018 (0xffffa4349018): 0x00000000 Write at address 0x00600018 (0xffffa4349018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8679b000. Read at address 0x00600018 (0xffff8679b018): 0x00000000 Write at address 0x00600018 (0xffff8679b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb15f8000. Read at address 0x00600018 (0xffffb15f8018): 0x00000000 Write at address 0x00600018 (0xffffb15f8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95c6c000. Read at address 0x00600018 (0xffff95c6c018): 0x00000000 Write at address 0x00600018 (0xffff95c6c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa77e9000. Read at address 0x00600018 (0xffffa77e9018): 0x00000000 Write at address 0x00600018 (0xffffa77e9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f424000. Read at address 0x00600018 (0xffff8f424018): 0x00000000 Write at address 0x00600018 (0xffff8f424018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabf94000. Read at address 0x00600018 (0xffffabf94018): 0x00000000 Write at address 0x00600018 (0xffffabf94018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85a1b000. Read at address 0x00600018 (0xffff85a1b018): 0x00000000 Write at address 0x00600018 (0xffff85a1b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa2f94000. Read at address 0x00600018 (0xffffa2f94018): 0x00000000 Write at address 0x00600018 (0xffffa2f94018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86564000. Read at address 0x00600018 (0xffff86564018): 0x00000000 Write at address 0x00600018 (0xffff86564018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff893a5000. Read at address 0x00600018 (0xffff893a5018): 0x00000000 Write at address 0x00600018 (0xffff893a5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82b5a000. Read at address 0x00600018 (0xffff82b5a018): 0x00000000 Write at address 0x00600018 (0xffff82b5a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93dad000. Read at address 0x00600018 (0xffff93dad018): 0x00000000 Write at address 0x00600018 (0xffff93dad018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb411f000. Read at address 0x00600018 (0xffffb411f018): 0x00000000 Write at address 0x00600018 (0xffffb411f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa85a8000. Read at address 0x00600018 (0xffffa85a8018): 0x00000000 Write at address 0x00600018 (0xffffa85a8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93619000. Read at address 0x00600018 (0xffff93619018): 0x00000000 Write at address 0x00600018 (0xffff93619018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff93cfc000. Read at address 0x00600018 (0xffff93cfc018): 0x00000000 Write at address 0x00600018 (0xffff93cfc018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9013f000. Read at address 0x00600018 (0xffff9013f018): 0x00000000 Write at address 0x00600018 (0xffff9013f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa064b000. Read at address 0x00600018 (0xffffa064b018): 0x00000000 Write at address 0x00600018 (0xffffa064b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabde2000. Read at address 0x00600018 (0xffffabde2018): 0x00000000 Write at address 0x00600018 (0xffffabde2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90154000. Read at address 0x00600018 (0xffff90154018): 0x00000000 Write at address 0x00600018 (0xffff90154018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6ace000. Read at address 0x00600018 (0xffffb6ace018): 0x00000000 Write at address 0x00600018 (0xffffb6ace018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb624b000. Read at address 0x00600018 (0xffffb624b018): 0x00000000 Write at address 0x00600018 (0xffffb624b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbe5d7000. Read at address 0x00600018 (0xffffbe5d7018): 0x00000000 Write at address 0x00600018 (0xffffbe5d7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaf54c000. Read at address 0x00600018 (0xffffaf54c018): 0x00000000 Write at address 0x00600018 (0xffffaf54c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9730d000. Read at address 0x00600018 (0xffff9730d018): 0x00000000 Write at address 0x00600018 (0xffff9730d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaabab000. Read at address 0x00600018 (0xffffaabab018): 0x00000000 Write at address 0x00600018 (0xffffaabab018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff894b1000. Read at address 0x00600018 (0xffff894b1018): 0x00000000 Write at address 0x00600018 (0xffff894b1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8ddb000. Read at address 0x00600018 (0xffffa8ddb018): 0x00000000 Write at address 0x00600018 (0xffffa8ddb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa80fd000. Read at address 0x00600018 (0xffffa80fd018): 0x00000000 Write at address 0x00600018 (0xffffa80fd018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb14ef000. Read at address 0x00600018 (0xffffb14ef018): 0x00000000 Write at address 0x00600018 (0xffffb14ef018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbcd05000. Read at address 0x00600018 (0xffffbcd05018): 0x00000000 Write at address 0x00600018 (0xffffbcd05018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1c44000. Read at address 0x00600018 (0xffffb1c44018): 0x00000000 Write at address 0x00600018 (0xffffb1c44018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2cf6000. Read at address 0x00600018 (0xffffa2cf6018): 0x00000000 Write at address 0x00600018 (0xffffa2cf6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb90c3000. Read at address 0x00600018 (0xffffb90c3018): 0x00000000 Write at address 0x00600018 (0xffffb90c3018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb45db000. Read at address 0x00600018 (0xffffb45db018): 0x00000000 Write at address 0x00600018 (0xffffb45db018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaeed6000. Read at address 0x00600018 (0xffffaeed6018): 0x00000000 Write at address 0x00600018 (0xffffaeed6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3304000. Read at address 0x00600018 (0xffffa3304018): 0x00000000 Write at address 0x00600018 (0xffffa3304018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4c40000. Read at address 0x00600018 (0xffffa4c40018): 0x00000000 Write at address 0x00600018 (0xffffa4c40018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ce1d000. Read at address 0x00600018 (0xffff8ce1d018): 0x00000000 Write at address 0x00600018 (0xffff8ce1d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff896ac000. Read at address 0x00600018 (0xffff896ac018): 0x00000000 Write at address 0x00600018 (0xffff896ac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9455d000. Read at address 0x00600018 (0xffff9455d018): 0x00000000 Write at address 0x00600018 (0xffff9455d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab133000. Read at address 0x00600018 (0xffffab133018): 0x00000000 Write at address 0x00600018 (0xffffab133018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa4929000. Read at address 0x00600018 (0xffffa4929018): 0x00000000 Write at address 0x00600018 (0xffffa4929018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb46e3000. Read at address 0x00600018 (0xffffb46e3018): 0x00000000 Write at address 0x00600018 (0xffffb46e3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5816000. Read at address 0x00600018 (0xffffb5816018): 0x00000000 Write at address 0x00600018 (0xffffb5816018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb38f4000. Read at address 0x00600018 (0xffffb38f4018): 0x00000000 Write at address 0x00600018 (0xffffb38f4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ea7b000. Read at address 0x00600018 (0xffff8ea7b018): 0x00000000 Write at address 0x00600018 (0xffff8ea7b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3e73000. Read at address 0x00600018 (0xffffa3e73018): 0x00000000 Write at address 0x00600018 (0xffffa3e73018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8fac8000. Read at address 0x00600018 (0xffff8fac8018): 0x00000000 Write at address 0x00600018 (0xffff8fac8018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae4e3000. Read at address 0x00600018 (0xffffae4e3018): 0x00000000 Write at address 0x00600018 (0xffffae4e3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9aacf000. Read at address 0x00600018 (0xffff9aacf018): 0x00000000 Write at address 0x00600018 (0xffff9aacf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f67b000. Read at address 0x00600018 (0xffff8f67b018): 0x00000000 Write at address 0x00600018 (0xffff8f67b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbaa3f000. Read at address 0x00600018 (0xffffbaa3f018): 0x00000000 Write at address 0x00600018 (0xffffbaa3f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff98c33000. Read at address 0x00600018 (0xffff98c33018): 0x00000000 Write at address 0x00600018 (0xffff98c33018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa77c5000. Read at address 0x00600018 (0xffffa77c5018): 0x00000000 Write at address 0x00600018 (0xffffa77c5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9fb16000. Read at address 0x00600018 (0xffff9fb16018): 0x00000000 Write at address 0x00600018 (0xffff9fb16018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8bd8f000. Read at address 0x00600018 (0xffff8bd8f018): 0x00000000 Write at address 0x00600018 (0xffff8bd8f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9861c000. Read at address 0x00600018 (0xffff9861c018): 0x00000000 Write at address 0x00600018 (0xffff9861c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8be20000. Read at address 0x00600018 (0xffff8be20018): 0x00000000 Write at address 0x00600018 (0xffff8be20018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9025000. Read at address 0x00600018 (0xffffa9025018): 0x00000000 Write at address 0x00600018 (0xffffa9025018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9e93a000. Read at address 0x00600018 (0xffff9e93a018): 0x00000000 Write at address 0x00600018 (0xffff9e93a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0894000. Read at address 0x00600018 (0xffffb0894018): 0x00000000 Write at address 0x00600018 (0xffffb0894018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94048000. Read at address 0x00600018 (0xffff94048018): 0x00000000 Write at address 0x00600018 (0xffff94048018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa2bbe000. Read at address 0x00600018 (0xffffa2bbe018): 0x00000000 Write at address 0x00600018 (0xffffa2bbe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82c50000. Read at address 0x00600018 (0xffff82c50018): 0x00000000 Write at address 0x00600018 (0xffff82c50018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaab43000. Read at address 0x00600018 (0xffffaab43018): 0x00000000 Write at address 0x00600018 (0xffffaab43018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffaaebc000. Read at address 0x00600018 (0xffffaaebc018): 0x00000000 Write at address 0x00600018 (0xffffaaebc018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b7f6000. Read at address 0x00600018 (0xffff9b7f6018): 0x00000000 Write at address 0x00600018 (0xffff9b7f6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff80580000. Read at address 0x00600018 (0xffff80580018): 0x00000000 Write at address 0x00600018 (0xffff80580018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb6662000. Read at address 0x00600018 (0xffffb6662018): 0x00000000 Write at address 0x00600018 (0xffffb6662018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb72f4000. Read at address 0x00600018 (0xffffb72f4018): 0x00000000 Write at address 0x00600018 (0xffffb72f4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbdd4000. Read at address 0x00600018 (0xffffbbdd4018): 0x00000000 Write at address 0x00600018 (0xffffbbdd4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96676000. Read at address 0x00600018 (0xffff96676018): 0x00000000 Write at address 0x00600018 (0xffff96676018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9738d000. Read at address 0x00600018 (0xffff9738d018): 0x00000000 Write at address 0x00600018 (0xffff9738d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff963a2000. Read at address 0x00600018 (0xffff963a2018): 0x00000000 Write at address 0x00600018 (0xffff963a2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9b747000. Read at address 0x00600018 (0xffff9b747018): 0x00000000 Write at address 0x00600018 (0xffff9b747018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff81464000. Read at address 0x00600018 (0xffff81464018): 0x00000000 Write at address 0x00600018 (0xffff81464018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91eda000. Read at address 0x00600018 (0xffff91eda018): 0x00000000 Write at address 0x00600018 (0xffff91eda018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffafa31000. Read at address 0x00600018 (0xffffafa31018): 0x00000000 Write at address 0x00600018 (0xffffafa31018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3be0000. Read at address 0x00600018 (0xffffa3be0018): 0x00000000 Write at address 0x00600018 (0xffffa3be0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffad8e4000. Read at address 0x00600018 (0xffffad8e4018): 0x00000000 Write at address 0x00600018 (0xffffad8e4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb90c4000. Read at address 0x00600018 (0xffffb90c4018): 0x00000000 Write at address 0x00600018 (0xffffb90c4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa85db000. Read at address 0x00600018 (0xffffa85db018): 0x00000000 Write at address 0x00600018 (0xffffa85db018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9fa4a000. Read at address 0x00600018 (0xffff9fa4a018): 0x00000000 Write at address 0x00600018 (0xffff9fa4a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5759000. Read at address 0x00600018 (0xffffa5759018): 0x00000000 Write at address 0x00600018 (0xffffa5759018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb38ca000. Read at address 0x00600018 (0xffffb38ca018): 0x00000000 Write at address 0x00600018 (0xffffb38ca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe5fc000. Read at address 0x00600018 (0xffffbe5fc018): 0x00000000 Write at address 0x00600018 (0xffffbe5fc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. net.ipv6.conf.all.addr_gen_mode = 0 Memory mapped at address 0xffff957fa000. Read at address 0x00600018 (0xffff957fa018): 0x00000000 Write at address 0x00600018 (0xffff957fa018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8fda000. Read at address 0x00600018 (0xffffb8fda018): 0x00000000 Write at address 0x00600018 (0xffffb8fda018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff804f4000. Read at address 0x00600018 (0xffff804f4018): 0x00000000 Write at address 0x00600018 (0xffff804f4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa32ea000. Read at address 0x00600018 (0xffffa32ea018): 0x00000000 Write at address 0x00600018 (0xffffa32ea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa4954000. Read at address 0x00600018 (0xffffa4954018): 0x00000000 Write at address 0x00600018 (0xffffa4954018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa0b30000. Read at address 0x00600018 (0xffffa0b30018): 0x00000000 Write at address 0x00600018 (0xffffa0b30018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bc99000. Read at address 0x00600018 (0xffff9bc99018): 0x00000000 Write at address 0x00600018 (0xffff9bc99018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbe879000. Read at address 0x00600018 (0xffffbe879018): 0x00000000 Write at address 0x00600018 (0xffffbe879018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff98d98000. Read at address 0x00600018 (0xffff98d98018): 0x00000000 Write at address 0x00600018 (0xffff98d98018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa48a9000. Read at address 0x00600018 (0xffffa48a9018): 0x00000000 Write at address 0x00600018 (0xffffa48a9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb3d1f000. Read at address 0x00600018 (0xffffb3d1f018): 0x00000000 Write at address 0x00600018 (0xffffb3d1f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a9a6000. Read at address 0x00600018 (0xffff8a9a6018): 0x00000000 Write at address 0x00600018 (0xffff8a9a6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 238 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffba260000. Read at address 0x00600018 (0xffffba260018): 0x00000000 Write at address 0x00600018 (0xffffba260018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8e8a000. Read at address 0x00600018 (0xffffa8e8a018): 0x00000000 Write at address 0x00600018 (0xffffa8e8a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89705000. Read at address 0x00600018 (0xffff89705018): 0x00000000 Write at address 0x00600018 (0xffff89705018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4b2d000. Read at address 0x00600018 (0xffffb4b2d018): 0x00000000 Write at address 0x00600018 (0xffffb4b2d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9609b000. Read at address 0x00600018 (0xffff9609b018): 0x00000000 Write at address 0x00600018 (0xffff9609b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f61f000. Read at address 0x00600018 (0xffff9f61f018): 0x00000000 Write at address 0x00600018 (0xffff9f61f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbcc53000. Read at address 0x00600018 (0xffffbcc53018): 0x00000000 Write at address 0x00600018 (0xffffbcc53018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbd05e000. Read at address 0x00600018 (0xffffbd05e018): 0x00000000 Write at address 0x00600018 (0xffffbd05e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa589e000. Read at address 0x00600018 (0xffffa589e018): 0x00000000 Write at address 0x00600018 (0xffffa589e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9b6f4000. Read at address 0x00600018 (0xffff9b6f4018): 0x00000000 Write at address 0x00600018 (0xffff9b6f4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4310000. Read at address 0x00600018 (0xffffa4310018): 0x00000000 Write at address 0x00600018 (0xffffa4310018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84e6f000. Read at address 0x00600018 (0xffff84e6f018): 0x00000000 Write at address 0x00600018 (0xffff84e6f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbb7b3000. Read at address 0x00600018 (0xffffbb7b3018): 0x00000000 Write at address 0x00600018 (0xffffbb7b3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 ubi2:textures is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8d729000. Read at address 0x00600018 (0xffff8d729018): 0x00000000 Write at address 0x00600018 (0xffff8d729018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91dbf000. Read at address 0x00600018 (0xffff91dbf018): 0x00000000 Write at address 0x00600018 (0xffff91dbf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0e9c000. Read at address 0x00600018 (0xffffb0e9c018): 0x00000000 Write at address 0x00600018 (0xffffb0e9c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff937aa000. Read at address 0x00600018 (0xffff937aa018): 0x00000000 Write at address 0x00600018 (0xffff937aa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9acef000. Read at address 0x00600018 (0xffff9acef018): 0x00000000 Write at address 0x00600018 (0xffff9acef018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6a43000. Read at address 0x00600018 (0xffffa6a43018): 0x00000000 Write at address 0x00600018 (0xffffa6a43018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9dfae000. Read at address 0x00600018 (0xffff9dfae018): 0x00000000 Write at address 0x00600018 (0xffff9dfae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff824c4000. Read at address 0x00600018 (0xffff824c4018): 0x00000000 Write at address 0x00600018 (0xffff824c4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbdfd3000. Read at address 0x00600018 (0xffffbdfd3018): 0x00000000 Write at address 0x00600018 (0xffffbdfd3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff87a4a000. Read at address 0x00600018 (0xffff87a4a018): 0x00000000 Write at address 0x00600018 (0xffff87a4a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa78a4000. Read at address 0x00600018 (0xffffa78a4018): 0x00000000 Write at address 0x00600018 (0xffffa78a4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0655000. Read at address 0x00600018 (0xffffa0655018): 0x00000000 Write at address 0x00600018 (0xffffa0655018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb2b5d000. Read at address 0x00600018 (0xffffb2b5d018): 0x00000000 Write at address 0x00600018 (0xffffb2b5d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa09c9000. Read at address 0x00600018 (0xffffa09c9018): 0x00000000 Write at address 0x00600018 (0xffffa09c9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9bcf4000. Read at address 0x00600018 (0xffff9bcf4018): 0x00000000 Write at address 0x00600018 (0xffff9bcf4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98125000. Read at address 0x00600018 (0xffff98125018): 0x00000000 Write at address 0x00600018 (0xffff98125018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff978c7000. Read at address 0x00600018 (0xffff978c7018): 0x00000000 Write at address 0x00600018 (0xffff978c7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80144000. Read at address 0x00600018 (0xffff80144018): 0x00000000 Write at address 0x00600018 (0xffff80144018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8490b000. Read at address 0x00600018 (0xffff8490b018): 0x00000000 Write at address 0x00600018 (0xffff8490b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9b8e3000. Read at address 0x00600018 (0xffff9b8e3018): 0x00000000 Write at address 0x00600018 (0xffff9b8e3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff98b25000. Read at address 0x00600018 (0xffff98b25018): 0x00000000 Write at address 0x00600018 (0xffff98b25018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac89b000. Read at address 0x00600018 (0xffffac89b018): 0x00000000 Write at address 0x00600018 (0xffffac89b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbb55e000. Read at address 0x00600018 (0xffffbb55e018): 0x00000000 Write at address 0x00600018 (0xffffbb55e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5bd3000. Read at address 0x00600018 (0xffffb5bd3018): 0x00000000 Write at address 0x00600018 (0xffffb5bd3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb25ff000. Read at address 0x00600018 (0xffffb25ff018): 0x00000000 Write at address 0x00600018 (0xffffb25ff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7307000. Read at address 0x00600018 (0xffffa7307018): 0x00000000 Write at address 0x00600018 (0xffffa7307018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff92441000. Read at address 0x00600018 (0xffff92441018): 0x00000000 Write at address 0x00600018 (0xffff92441018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94323000. Read at address 0x00600018 (0xffff94323018): 0x00000000 Write at address 0x00600018 (0xffff94323018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9fb81000. Read at address 0x00600018 (0xffff9fb81018): 0x00000000 Write at address 0x00600018 (0xffff9fb81018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff97db1000. Read at address 0x00600018 (0xffff97db1018): 0x00000000 Write at address 0x00600018 (0xffff97db1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8a54b000. Read at address 0x00600018 (0xffff8a54b018): 0x00000000 Write at address 0x00600018 (0xffff8a54b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd896000. Read at address 0x00600018 (0xffffbd896018): 0x00000000 Write at address 0x00600018 (0xffffbd896018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff99aa7000. Read at address 0x00600018 (0xffff99aa7018): 0x00000000 Write at address 0x00600018 (0xffff99aa7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffab980000. Read at address 0x00600018 (0xffffab980018): 0x00000000 Write at address 0x00600018 (0xffffab980018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff832c1000. Read at address 0x00600018 (0xffff832c1018): 0x00000000 Write at address 0x00600018 (0xffff832c1018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0199000. Read at address 0x00600018 (0xffffb0199018): 0x00000000 Write at address 0x00600018 (0xffffb0199018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad19a000. Read at address 0x00600018 (0xffffad19a018): 0x00000000 Write at address 0x00600018 (0xffffad19a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9c467000. Read at address 0x00600018 (0xffff9c467018): 0x00000000 Write at address 0x00600018 (0xffff9c467018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e430000. Read at address 0x00600018 (0xffff9e430018): 0x00000000 Write at address 0x00600018 (0xffff9e430018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7661000. Read at address 0x00600018 (0xffffa7661018): 0x00000000 Write at address 0x00600018 (0xffffa7661018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e8c8000. Read at address 0x00600018 (0xffff9e8c8018): 0x00000000 Write at address 0x00600018 (0xffff9e8c8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffab27e000. Read at address 0x00600018 (0xffffab27e018): 0x00000000 Write at address 0x00600018 (0xffffab27e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91d4f000. Read at address 0x00600018 (0xffff91d4f018): 0x00000000 Write at address 0x00600018 (0xffff91d4f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe53a000. Read at address 0x00600018 (0xffffbe53a018): 0x00000000 Write at address 0x00600018 (0xffffbe53a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93c53000. Read at address 0x00600018 (0xffff93c53018): 0x00000000 Write at address 0x00600018 (0xffff93c53018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9c653000. Read at address 0x00600018 (0xffff9c653018): 0x00000000 Write at address 0x00600018 (0xffff9c653018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffab255000. Read at address 0x00600018 (0xffffab255018): 0x00000000 Write at address 0x00600018 (0xffffab255018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2b18000. Read at address 0x00600018 (0xffffb2b18018): 0x00000000 Write at address 0x00600018 (0xffffb2b18018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff80186000. Read at address 0x00600018 (0xffff80186018): 0x00000000 Write at address 0x00600018 (0xffff80186018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff98aba000. Read at address 0x00600018 (0xffff98aba018): 0x00000000 Write at address 0x00600018 (0xffff98aba018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa9c45000. Read at address 0x00600018 (0xffffa9c45018): 0x00000000 Write at address 0x00600018 (0xffffa9c45018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 net.ipv6.conf.all.disable_ipv6 = 1 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf4f7000. Read at address 0x00600018 (0xffffbf4f7018): 0x00000000 Write at address 0x00600018 (0xffffbf4f7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bdac000. Read at address 0x00600018 (0xffff9bdac018): 0x00000000 Write at address 0x00600018 (0xffff9bdac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8e6de000. Read at address 0x00600018 (0xffff8e6de018): 0x00000000 Write at address 0x00600018 (0xffff8e6de018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffaf172000. Read at address 0x00600018 (0xffffaf172018): 0x00000000 Write at address 0x00600018 (0xffffaf172018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff93172000. Read at address 0x00600018 (0xffff93172018): 0x00000000 Write at address 0x00600018 (0xffff93172018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95a66000. Read at address 0x00600018 (0xffff95a66018): 0x00000000 Write at address 0x00600018 (0xffff95a66018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3673000. Read at address 0x00600018 (0xffffa3673018): 0x00000000 Write at address 0x00600018 (0xffffa3673018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab33f000. Read at address 0x00600018 (0xffffab33f018): 0x00000000 Write at address 0x00600018 (0xffffab33f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb3012000. Read at address 0x00600018 (0xffffb3012018): 0x00000000 Write at address 0x00600018 (0xffffb3012018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81c5b000. Read at address 0x00600018 (0xffff81c5b018): 0x00000000 Write at address 0x00600018 (0xffff81c5b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa28fa000. Read at address 0x00600018 (0xffffa28fa018): 0x00000000 Write at address 0x00600018 (0xffffa28fa018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd691000. Read at address 0x00600018 (0xffffbd691018): 0x00000000 Write at address 0x00600018 (0xffffbd691018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbdb44000. Read at address 0x00600018 (0xffffbdb44018): 0x00000000 Write at address 0x00600018 (0xffffbdb44018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff920ea000. Read at address 0x00600018 (0xffff920ea018): 0x00000000 Write at address 0x00600018 (0xffff920ea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc272000. Read at address 0x00600018 (0xffffbc272018): 0x00000000 Write at address 0x00600018 (0xffffbc272018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa07db000. Read at address 0x00600018 (0xffffa07db018): 0x00000000 Write at address 0x00600018 (0xffffa07db018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa8842000. Read at address 0x00600018 (0xffffa8842018): 0x00000000 Write at address 0x00600018 (0xffffa8842018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb53ce000. Read at address 0x00600018 (0xffffb53ce018): 0x00000000 Write at address 0x00600018 (0xffffb53ce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbeb5c000. Read at address 0x00600018 (0xffffbeb5c018): 0x00000000 Write at address 0x00600018 (0xffffbeb5c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb126d000. Read at address 0x00600018 (0xffffb126d018): 0x00000000 Write at address 0x00600018 (0xffffb126d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9bc45000. Read at address 0x00600018 (0xffff9bc45018): 0x00000000 Write at address 0x00600018 (0xffff9bc45018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8153f000. Read at address 0x00600018 (0xffff8153f018): 0x00000000 Write at address 0x00600018 (0xffff8153f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9049c000. Read at address 0x00600018 (0xffff9049c018): 0x00000000 Write at address 0x00600018 (0xffff9049c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff82af5000. Read at address 0x00600018 (0xffff82af5018): 0x00000000 Write at address 0x00600018 (0xffff82af5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 net.ipv6.conf.eth0.dad_transmits = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb3ca9000. Read at address 0x00600018 (0xffffb3ca9018): 0x00000000 Write at address 0x00600018 (0xffffb3ca9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98340000. Read at address 0x00600018 (0xffff98340018): 0x00000000 Write at address 0x00600018 (0xffff98340018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb42a2000. Read at address 0x00600018 (0xffffb42a2018): 0x00000000 Write at address 0x00600018 (0xffffb42a2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa5daf000. Read at address 0x00600018 (0xffffa5daf018): 0x00000000 Write at address 0x00600018 (0xffffa5daf018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb01ae000. Read at address 0x00600018 (0xffffb01ae018): 0x00000000 Write at address 0x00600018 (0xffffb01ae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb29de000. Read at address 0x00600018 (0xffffb29de018): 0x00000000 Write at address 0x00600018 (0xffffb29de018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8be95000. Read at address 0x00600018 (0xffff8be95018): 0x00000000 Write at address 0x00600018 (0xffff8be95018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3093000. Read at address 0x00600018 (0xffffb3093018): 0x00000000 Write at address 0x00600018 (0xffffb3093018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbb2e3000. Read at address 0x00600018 (0xffffbb2e3018): 0x00000000 Write at address 0x00600018 (0xffffbb2e3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0d4a000. Read at address 0x00600018 (0xffffb0d4a018): 0x00000000 Write at address 0x00600018 (0xffffb0d4a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffad656000. Read at address 0x00600018 (0xffffad656018): 0x00000000 Write at address 0x00600018 (0xffffad656018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96527000. Read at address 0x00600018 (0xffff96527018): 0x00000000 Write at address 0x00600018 (0xffff96527018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaab8a000. Read at address 0x00600018 (0xffffaab8a018): 0x00000000 Write at address 0x00600018 (0xffffaab8a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8dbec000. Read at address 0x00600018 (0xffff8dbec018): 0x00000000 Write at address 0x00600018 (0xffff8dbec018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffaab3b000. Read at address 0x00600018 (0xffffaab3b018): 0x00000000 Write at address 0x00600018 (0xffffaab3b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa7201000. Read at address 0x00600018 (0xffffa7201018): 0x00000000 Write at address 0x00600018 (0xffffa7201018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8dd39000. Read at address 0x00600018 (0xffff8dd39018): 0x00000000 Write at address 0x00600018 (0xffff8dd39018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa480a000. Read at address 0x00600018 (0xffffa480a018): 0x00000000 Write at address 0x00600018 (0xffffa480a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9b273000. Read at address 0x00600018 (0xffff9b273018): 0x00000000 Write at address 0x00600018 (0xffff9b273018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb4c6c000. Read at address 0x00600018 (0xffffb4c6c018): 0x00000000 Write at address 0x00600018 (0xffffb4c6c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d2be000. Read at address 0x00600018 (0xffff9d2be018): 0x00000000 Write at address 0x00600018 (0xffff9d2be018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95181000. Read at address 0x00600018 (0xffff95181018): 0x00000000 Write at address 0x00600018 (0xffff95181018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa6a6e000. Read at address 0x00600018 (0xffffa6a6e018): 0x00000000 Write at address 0x00600018 (0xffffa6a6e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff92bae000. Read at address 0x00600018 (0xffff92bae018): 0x00000000 Write at address 0x00600018 (0xffff92bae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb19df000. Read at address 0x00600018 (0xffffb19df018): 0x00000000 Write at address 0x00600018 (0xffffb19df018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8f05000. Read at address 0x00600018 (0xffffb8f05018): 0x00000000 Write at address 0x00600018 (0xffffb8f05018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb12f6000. Read at address 0x00600018 (0xffffb12f6018): 0x00000000 Write at address 0x00600018 (0xffffb12f6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8a245000. Read at address 0x00600018 (0xffff8a245018): 0x00000000 Write at address 0x00600018 (0xffff8a245018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb88b1000. Read at address 0x00600018 (0xffffb88b1018): 0x00000000 Write at address 0x00600018 (0xffffb88b1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89aa5000. Read at address 0x00600018 (0xffff89aa5018): 0x00000000 Write at address 0x00600018 (0xffff89aa5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3ded000. Read at address 0x00600018 (0xffffb3ded018): 0x00000000 Write at address 0x00600018 (0xffffb3ded018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4a86000. Read at address 0x00600018 (0xffffa4a86018): 0x00000000 Write at address 0x00600018 (0xffffa4a86018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99975000. Read at address 0x00600018 (0xffff99975018): 0x00000000 Write at address 0x00600018 (0xffff99975018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff85500000. Read at address 0x00600018 (0xffff85500018): 0x00000000 Write at address 0x00600018 (0xffff85500018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa33c6000. Read at address 0x00600018 (0xffffa33c6018): 0x00000000 Write at address 0x00600018 (0xffffa33c6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff93f9c000. Read at address 0x00600018 (0xffff93f9c018): 0x00000000 Write at address 0x00600018 (0xffff93f9c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88f1a000. Read at address 0x00600018 (0xffff88f1a018): 0x00000000 Write at address 0x00600018 (0xffff88f1a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9fe0a000. Read at address 0x00600018 (0xffff9fe0a018): 0x00000000 Write at address 0x00600018 (0xffff9fe0a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa98dd000. Read at address 0x00600018 (0xffffa98dd018): 0x00000000 Write at address 0x00600018 (0xffffa98dd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadd41000. Read at address 0x00600018 (0xffffadd41018): 0x00000000 Write at address 0x00600018 (0xffffadd41018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbeb36000. Read at address 0x00600018 (0xffffbeb36018): 0x00000000 Write at address 0x00600018 (0xffffbeb36018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9cbbf000. Read at address 0x00600018 (0xffff9cbbf018): 0x00000000 Write at address 0x00600018 (0xffff9cbbf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff998b6000. Read at address 0x00600018 (0xffff998b6018): 0x00000000 Write at address 0x00600018 (0xffff998b6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97fb4000. Read at address 0x00600018 (0xffff97fb4018): 0x00000000 Write at address 0x00600018 (0xffff97fb4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cac4000. Read at address 0x00600018 (0xffff9cac4018): 0x00000000 Write at address 0x00600018 (0xffff9cac4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb38a7000. Read at address 0x00600018 (0xffffb38a7018): 0x00000000 Write at address 0x00600018 (0xffffb38a7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9ce3b000. Read at address 0x00600018 (0xffff9ce3b018): 0x00000000 Write at address 0x00600018 (0xffff9ce3b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7929000. Read at address 0x00600018 (0xffffa7929018): 0x00000000 Write at address 0x00600018 (0xffffa7929018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86434000. Read at address 0x00600018 (0xffff86434018): 0x00000000 Write at address 0x00600018 (0xffff86434018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a254000. Read at address 0x00600018 (0xffff8a254018): 0x00000000 Write at address 0x00600018 (0xffff8a254018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa2b37000. Read at address 0x00600018 (0xffffa2b37018): 0x00000000 Write at address 0x00600018 (0xffffa2b37018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8cd1c000. Read at address 0x00600018 (0xffff8cd1c018): 0x00000000 Write at address 0x00600018 (0xffff8cd1c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbb5b8000. Read at address 0x00600018 (0xffffbb5b8018): 0x00000000 Write at address 0x00600018 (0xffffbb5b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9b49000. Read at address 0x00600018 (0xffffa9b49018): 0x00000000 Write at address 0x00600018 (0xffffa9b49018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached ubi0:dml_code is mounted. mtd28 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5f8a000. Read at address 0x00600018 (0xffffb5f8a018): 0x00000000 Write at address 0x00600018 (0xffffb5f8a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ecc1000. Read at address 0x00600018 (0xffff8ecc1018): 0x00000000 Write at address 0x00600018 (0xffff8ecc1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8081f000. Read at address 0x00600018 (0xffff8081f018): 0x00000000 Write at address 0x00600018 (0xffff8081f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4468000. Read at address 0x00600018 (0xffffb4468018): 0x00000000 Write at address 0x00600018 (0xffffb4468018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80445000. Read at address 0x00600018 (0xffff80445018): 0x00000000 Write at address 0x00600018 (0xffff80445018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac7f2000. Read at address 0x00600018 (0xffffac7f2018): 0x00000000 Write at address 0x00600018 (0xffffac7f2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb5f71000. Read at address 0x00600018 (0xffffb5f71018): 0x00000000 Write at address 0x00600018 (0xffffb5f71018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff81089000. Read at address 0x00600018 (0xffff81089018): 0x00000000 Write at address 0x00600018 (0xffff81089018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff88885000. Read at address 0x00600018 (0xffff88885018): 0x00000000 Write at address 0x00600018 (0xffff88885018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb80dd000. Read at address 0x00600018 (0xffffb80dd018): 0x00000000 Write at address 0x00600018 (0xffffb80dd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb4bb000. Read at address 0x00600018 (0xffffbb4bb018): 0x00000000 Write at address 0x00600018 (0xffffbb4bb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaf1ca000. Read at address 0x00600018 (0xffffaf1ca018): 0x00000000 Write at address 0x00600018 (0xffffaf1ca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffba35c000. Read at address 0x00600018 (0xffffba35c018): 0x00000000 Write at address 0x00600018 (0xffffba35c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8dfce000. Read at address 0x00600018 (0xffff8dfce018): 0x00000000 Write at address 0x00600018 (0xffff8dfce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fe92000. Read at address 0x00600018 (0xffff8fe92018): 0x00000000 Write at address 0x00600018 (0xffff8fe92018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba0be000. Read at address 0x00600018 (0xffffba0be018): 0x00000000 Write at address 0x00600018 (0xffffba0be018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffabc44000. Read at address 0x00600018 (0xffffabc44018): 0x00000000 Write at address 0x00600018 (0xffffabc44018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac3e4000. Read at address 0x00600018 (0xffffac3e4018): 0x00000000 Write at address 0x00600018 (0xffffac3e4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ba98000. Read at address 0x00600018 (0xffff9ba98018): 0x00000000 Write at address 0x00600018 (0xffff9ba98018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb93f0000. Read at address 0x00600018 (0xffffb93f0018): 0x00000000 Write at address 0x00600018 (0xffffb93f0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff99a9f000. Read at address 0x00600018 (0xffff99a9f018): 0x00000000 Write at address 0x00600018 (0xffff99a9f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9bd15000. Read at address 0x00600018 (0xffff9bd15018): 0x00000000 Write at address 0x00600018 (0xffff9bd15018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffacce2000. Read at address 0x00600018 (0xffffacce2018): 0x00000000 Write at address 0x00600018 (0xffffacce2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff854c1000. Read at address 0x00600018 (0xffff854c1018): 0x00000000 Write at address 0x00600018 (0xffff854c1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb3d9000. Read at address 0x00600018 (0xffffbb3d9018): 0x00000000 Write at address 0x00600018 (0xffffbb3d9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa6b3a000. Read at address 0x00600018 (0xffffa6b3a018): 0x00000000 Write at address 0x00600018 (0xffffa6b3a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88029000. Read at address 0x00600018 (0xffff88029018): 0x00000000 Write at address 0x00600018 (0xffff88029018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae67a000. Read at address 0x00600018 (0xffffae67a018): 0x00000000 Write at address 0x00600018 (0xffffae67a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff88d20000. Read at address 0x00600018 (0xffff88d20018): 0x00000000 Write at address 0x00600018 (0xffff88d20018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8accd000. Read at address 0x00600018 (0xffff8accd018): 0x00000000 Write at address 0x00600018 (0xffff8accd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadb65000. Read at address 0x00600018 (0xffffadb65018): 0x00000000 Write at address 0x00600018 (0xffffadb65018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff837af000. Read at address 0x00600018 (0xffff837af018): 0x00000000 Write at address 0x00600018 (0xffff837af018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa48a000. Read at address 0x00600018 (0xffffaa48a018): 0x00000000 Write at address 0x00600018 (0xffffaa48a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8435f000. Read at address 0x00600018 (0xffff8435f018): 0x00000000 Write at address 0x00600018 (0xffff8435f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9f672000. Read at address 0x00600018 (0xffff9f672018): 0x00000000 Write at address 0x00600018 (0xffff9f672018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa433d000. Read at address 0x00600018 (0xffffa433d018): 0x00000000 Write at address 0x00600018 (0xffffa433d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a155000. Read at address 0x00600018 (0xffff9a155018): 0x00000000 Write at address 0x00600018 (0xffff9a155018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafca7000. Read at address 0x00600018 (0xffffafca7018): 0x00000000 Write at address 0x00600018 (0xffffafca7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae06c000. Read at address 0x00600018 (0xffffae06c018): 0x00000000 Write at address 0x00600018 (0xffffae06c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb89e4000. Read at address 0x00600018 (0xffffb89e4018): 0x00000000 Write at address 0x00600018 (0xffffb89e4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d382000. Read at address 0x00600018 (0xffff9d382018): 0x00000000 Write at address 0x00600018 (0xffff9d382018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87b1e000. Read at address 0x00600018 (0xffff87b1e018): 0x00000000 Write at address 0x00600018 (0xffff87b1e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8a755000. Read at address 0x00600018 (0xffff8a755018): 0x00000000 Write at address 0x00600018 (0xffff8a755018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff897d0000. Read at address 0x00600018 (0xffff897d0018): 0x00000000 Write at address 0x00600018 (0xffff897d0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99010000. Read at address 0x00600018 (0xffff99010018): 0x00000000 Write at address 0x00600018 (0xffff99010018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbad0b000. Read at address 0x00600018 (0xffffbad0b018): 0x00000000 Write at address 0x00600018 (0xffffbad0b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa3615000. Read at address 0x00600018 (0xffffa3615018): 0x00000000 Write at address 0x00600018 (0xffffa3615018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb1299000. Read at address 0x00600018 (0xffffb1299018): 0x00000000 Write at address 0x00600018 (0xffffb1299018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0845000. Read at address 0x00600018 (0xffffa0845018): 0x00000000 Write at address 0x00600018 (0xffffa0845018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb3dc9000. Read at address 0x00600018 (0xffffb3dc9018): 0x00000000 Write at address 0x00600018 (0xffffb3dc9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8aeaf000. Read at address 0x00600018 (0xffff8aeaf018): 0x00000000 Write at address 0x00600018 (0xffff8aeaf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9dfc3000. Read at address 0x00600018 (0xffff9dfc3018): 0x00000000 Write at address 0x00600018 (0xffff9dfc3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84933000. Read at address 0x00600018 (0xffff84933018): 0x00000000 Write at address 0x00600018 (0xffff84933018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8df02000. Read at address 0x00600018 (0xffff8df02018): 0x00000000 Write at address 0x00600018 (0xffff8df02018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cf6e000. Read at address 0x00600018 (0xffff9cf6e018): 0x00000000 Write at address 0x00600018 (0xffff9cf6e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb1fa7000. Read at address 0x00600018 (0xffffb1fa7018): 0x00000000 Write at address 0x00600018 (0xffffb1fa7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a1a1000. Read at address 0x00600018 (0xffff9a1a1018): 0x00000000 Write at address 0x00600018 (0xffff9a1a1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fe44000. Read at address 0x00600018 (0xffff8fe44018): 0x00000000 Write at address 0x00600018 (0xffff8fe44018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb7702000. Read at address 0x00600018 (0xffffb7702018): 0x00000000 Write at address 0x00600018 (0xffffb7702018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9483c000. Read at address 0x00600018 (0xffff9483c018): 0x00000000 Write at address 0x00600018 (0xffff9483c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb225e000. Read at address 0x00600018 (0xffffb225e018): 0x00000000 Write at address 0x00600018 (0xffffb225e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad331000. Read at address 0x00600018 (0xffffad331018): 0x00000000 Write at address 0x00600018 (0xffffad331018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93c28000. Read at address 0x00600018 (0xffff93c28018): 0x00000000 Write at address 0x00600018 (0xffff93c28018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb17ef000. Read at address 0x00600018 (0xffffb17ef018): 0x00000000 Write at address 0x00600018 (0xffffb17ef018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff992aa000. Read at address 0x00600018 (0xffff992aa018): 0x00000000 Write at address 0x00600018 (0xffff992aa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84aab000. Read at address 0x00600018 (0xffff84aab018): 0x00000000 Write at address 0x00600018 (0xffff84aab018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa8cdb000. Read at address 0x00600018 (0xffffa8cdb018): 0x00000000 Write at address 0x00600018 (0xffffa8cdb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff921a4000. Read at address 0x00600018 (0xffff921a4018): 0x00000000 Write at address 0x00600018 (0xffff921a4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafffa000. Read at address 0x00600018 (0xffffafffa018): 0x00000000 Write at address 0x00600018 (0xffffafffa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff88d75000. Read at address 0x00600018 (0xffff88d75018): 0x00000000 Write at address 0x00600018 (0xffff88d75018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e018000. Read at address 0x00600018 (0xffff8e018018): 0x00000000 Write at address 0x00600018 (0xffff8e018018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9cd03000. Read at address 0x00600018 (0xffff9cd03018): 0x00000000 Write at address 0x00600018 (0xffff9cd03018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff978fe000. Read at address 0x00600018 (0xffff978fe018): 0x00000000 Write at address 0x00600018 (0xffff978fe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff81baf000. Read at address 0x00600018 (0xffff81baf018): 0x00000000 Write at address 0x00600018 (0xffff81baf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff83b52000. Read at address 0x00600018 (0xffff83b52018): 0x00000000 Write at address 0x00600018 (0xffff83b52018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffacc90000. Read at address 0x00600018 (0xffffacc90018): 0x00000000 Write at address 0x00600018 (0xffffacc90018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9fcff000. Read at address 0x00600018 (0xffff9fcff018): 0x00000000 Write at address 0x00600018 (0xffff9fcff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8baf6000. Read at address 0x00600018 (0xffff8baf6018): 0x00000000 Write at address 0x00600018 (0xffff8baf6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1bee000. Read at address 0x00600018 (0xffffa1bee018): 0x00000000 Write at address 0x00600018 (0xffffa1bee018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa6d27000. Read at address 0x00600018 (0xffffa6d27018): 0x00000000 Write at address 0x00600018 (0xffffa6d27018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d197000. Read at address 0x00600018 (0xffff9d197018): 0x00000000 Write at address 0x00600018 (0xffff9d197018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb21ad000. Read at address 0x00600018 (0xffffb21ad018): 0x00000000 Write at address 0x00600018 (0xffffb21ad018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8184f000. Read at address 0x00600018 (0xffff8184f018): 0x00000000 Write at address 0x00600018 (0xffff8184f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa33e5000. Read at address 0x00600018 (0xffffa33e5018): 0x00000000 Write at address 0x00600018 (0xffffa33e5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae905000. Read at address 0x00600018 (0xffffae905018): 0x00000000 Write at address 0x00600018 (0xffffae905018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffab49b000. Read at address 0x00600018 (0xffffab49b018): 0x00000000 Write at address 0x00600018 (0xffffab49b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ba28000. Read at address 0x00600018 (0xffff9ba28018): 0x00000000 Write at address 0x00600018 (0xffff9ba28018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3952000. Read at address 0x00600018 (0xffffa3952018): 0x00000000 Write at address 0x00600018 (0xffffa3952018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90a2c000. Read at address 0x00600018 (0xffff90a2c018): 0x00000000 Write at address 0x00600018 (0xffff90a2c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff808b7000. Read at address 0x00600018 (0xffff808b7018): 0x00000000 Write at address 0x00600018 (0xffff808b7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff834d8000. Read at address 0x00600018 (0xffff834d8018): 0x00000000 Write at address 0x00600018 (0xffff834d8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80b7a000. Read at address 0x00600018 (0xffff80b7a018): 0x00000000 Write at address 0x00600018 (0xffff80b7a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff93ce6000. Read at address 0x00600018 (0xffff93ce6018): 0x00000000 Write at address 0x00600018 (0xffff93ce6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8413e000. Read at address 0x00600018 (0xffff8413e018): 0x00000000 Write at address 0x00600018 (0xffff8413e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa222f000. Read at address 0x00600018 (0xffffa222f018): 0x00000000 Write at address 0x00600018 (0xffffa222f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff93db0000. Read at address 0x00600018 (0xffff93db0018): 0x00000000 Write at address 0x00600018 (0xffff93db0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8d58c000. Read at address 0x00600018 (0xffff8d58c018): 0x00000000 Write at address 0x00600018 (0xffff8d58c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff84f8f000. Read at address 0x00600018 (0xffff84f8f018): 0x00000000 Write at address 0x00600018 (0xffff84f8f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa17d7000. Read at address 0x00600018 (0xffffa17d7018): 0x00000000 Write at address 0x00600018 (0xffffa17d7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb245e000. Read at address 0x00600018 (0xffffb245e018): 0x00000000 Write at address 0x00600018 (0xffffb245e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4163000. Read at address 0x00600018 (0xffffb4163018): 0x00000000 Write at address 0x00600018 (0xffffb4163018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb0c78000. Read at address 0x00600018 (0xffffb0c78018): 0x00000000 Write at address 0x00600018 (0xffffb0c78018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8cd0e000. Read at address 0x00600018 (0xffff8cd0e018): 0x00000000 Write at address 0x00600018 (0xffff8cd0e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9dd1d000. Read at address 0x00600018 (0xffff9dd1d018): 0x00000000 Write at address 0x00600018 (0xffff9dd1d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e5a5000. Read at address 0x00600018 (0xffff9e5a5018): 0x00000000 Write at address 0x00600018 (0xffff9e5a5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb649b000. Read at address 0x00600018 (0xffffb649b018): 0x00000000 Write at address 0x00600018 (0xffffb649b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff83df4000. Read at address 0x00600018 (0xffff83df4018): 0x00000000 Write at address 0x00600018 (0xffff83df4018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa2ba8000. Read at address 0x00600018 (0xffffa2ba8018): 0x00000000 Write at address 0x00600018 (0xffffa2ba8018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff829e2000. Read at address 0x00600018 (0xffff829e2018): 0x00000000 Write at address 0x00600018 (0xffff829e2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94174000. Read at address 0x00600018 (0xffff94174018): 0x00000000 Write at address 0x00600018 (0xffff94174018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb51a3000. Read at address 0x00600018 (0xffffb51a3018): 0x00000000 Write at address 0x00600018 (0xffffb51a3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86c6d000. Read at address 0x00600018 (0xffff86c6d018): 0x00000000 Write at address 0x00600018 (0xffff86c6d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb8358000. Read at address 0x00600018 (0xffffb8358018): 0x00000000 Write at address 0x00600018 (0xffffb8358018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9a808000. Read at address 0x00600018 (0xffff9a808018): 0x00000000 Write at address 0x00600018 (0xffff9a808018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97472000. Read at address 0x00600018 (0xffff97472018): 0x00000000 Write at address 0x00600018 (0xffff97472018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82141000. Read at address 0x00600018 (0xffff82141018): 0x00000000 Write at address 0x00600018 (0xffff82141018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa04aa000. Read at address 0x00600018 (0xffffa04aa018): 0x00000000 Write at address 0x00600018 (0xffffa04aa018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9904d000. Read at address 0x00600018 (0xffff9904d018): 0x00000000 Write at address 0x00600018 (0xffff9904d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5a92000. Read at address 0x00600018 (0xffffa5a92018): 0x00000000 Write at address 0x00600018 (0xffffa5a92018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b485000. Read at address 0x00600018 (0xffff9b485018): 0x00000000 Write at address 0x00600018 (0xffff9b485018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa95f6000. Read at address 0x00600018 (0xffffa95f6018): 0x00000000 Write at address 0x00600018 (0xffffa95f6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb7e63000. Read at address 0x00600018 (0xffffb7e63018): 0x00000000 Write at address 0x00600018 (0xffffb7e63018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8265000. Read at address 0x00600018 (0xffffa8265018): 0x00000000 Write at address 0x00600018 (0xffffa8265018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95669000. Read at address 0x00600018 (0xffff95669018): 0x00000000 Write at address 0x00600018 (0xffff95669018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96e5d000. Read at address 0x00600018 (0xffff96e5d018): 0x00000000 Write at address 0x00600018 (0xffff96e5d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb6a78000. Read at address 0x00600018 (0xffffb6a78018): 0x00000000 Write at address 0x00600018 (0xffffb6a78018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ae31000. Read at address 0x00600018 (0xffff9ae31018): 0x00000000 Write at address 0x00600018 (0xffff9ae31018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d31b000. Read at address 0x00600018 (0xffff9d31b018): 0x00000000 Write at address 0x00600018 (0xffff9d31b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadd31000. Read at address 0x00600018 (0xffffadd31018): 0x00000000 Write at address 0x00600018 (0xffffadd31018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff912f6000. Read at address 0x00600018 (0xffff912f6018): 0x00000000 Write at address 0x00600018 (0xffff912f6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0542000. Read at address 0x00600018 (0xffffb0542018): 0x00000000 Write at address 0x00600018 (0xffffb0542018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff952d3000. Read at address 0x00600018 (0xffff952d3018): 0x00000000 Write at address 0x00600018 (0xffff952d3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5d9a000. Read at address 0x00600018 (0xffffb5d9a018): 0x00000000 Write at address 0x00600018 (0xffffb5d9a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc95e000. Read at address 0x00600018 (0xffffbc95e018): 0x00000000 Write at address 0x00600018 (0xffffbc95e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8c7e7000. Read at address 0x00600018 (0xffff8c7e7018): 0x00000000 Write at address 0x00600018 (0xffff8c7e7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9a89e000. Read at address 0x00600018 (0xffff9a89e018): 0x00000000 Write at address 0x00600018 (0xffff9a89e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff92e30000. Read at address 0x00600018 (0xffff92e30018): 0x00000000 Write at address 0x00600018 (0xffff92e30018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93789000. Read at address 0x00600018 (0xffff93789018): 0x00000000 Write at address 0x00600018 (0xffff93789018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81780000. Read at address 0x00600018 (0xffff81780018): 0x00000000 Write at address 0x00600018 (0xffff81780018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbaf4b000. Read at address 0x00600018 (0xffffbaf4b018): 0x00000000 Write at address 0x00600018 (0xffffbaf4b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9e19c000. Read at address 0x00600018 (0xffff9e19c018): 0x00000000 Write at address 0x00600018 (0xffff9e19c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbdf00000. Read at address 0x00600018 (0xffffbdf00018): 0x00000000 Write at address 0x00600018 (0xffffbdf00018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6ca0000. Read at address 0x00600018 (0xffffa6ca0018): 0x00000000 Write at address 0x00600018 (0xffffa6ca0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb06a4000. Read at address 0x00600018 (0xffffb06a4018): 0x00000000 Write at address 0x00600018 (0xffffb06a4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaaa19000. Read at address 0x00600018 (0xffffaaa19018): 0x00000000 Write at address 0x00600018 (0xffffaaa19018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff827de000. Read at address 0x00600018 (0xffff827de018): 0x00000000 Write at address 0x00600018 (0xffff827de018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95888000. Read at address 0x00600018 (0xffff95888018): 0x00000000 Write at address 0x00600018 (0xffff95888018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb966e000. Read at address 0x00600018 (0xffffb966e018): 0x00000000 Write at address 0x00600018 (0xffffb966e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e776000. Read at address 0x00600018 (0xffff8e776018): 0x00000000 Write at address 0x00600018 (0xffff8e776018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff820ae000. Read at address 0x00600018 (0xffff820ae018): 0x00000000 Write at address 0x00600018 (0xffff820ae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff97599000. Read at address 0x00600018 (0xffff97599018): 0x00000000 Write at address 0x00600018 (0xffff97599018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb839a000. Read at address 0x00600018 (0xffffb839a018): 0x00000000 Write at address 0x00600018 (0xffffb839a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb7d85000. Read at address 0x00600018 (0xffffb7d85018): 0x00000000 Write at address 0x00600018 (0xffffb7d85018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff89484000. Read at address 0x00600018 (0xffff89484018): 0x00000000 Write at address 0x00600018 (0xffff89484018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9d2a0000. Read at address 0x00600018 (0xffff9d2a0018): 0x00000000 Write at address 0x00600018 (0xffff9d2a0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff82268000. Read at address 0x00600018 (0xffff82268018): 0x00000000 Write at address 0x00600018 (0xffff82268018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbf0b000. Read at address 0x00600018 (0xffffbbf0b018): 0x00000000 Write at address 0x00600018 (0xffffbbf0b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb1ff3000. Read at address 0x00600018 (0xffffb1ff3018): 0x00000000 Write at address 0x00600018 (0xffffb1ff3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2bc9000. Read at address 0x00600018 (0xffffb2bc9018): 0x00000000 Write at address 0x00600018 (0xffffb2bc9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87440000. Read at address 0x00600018 (0xffff87440018): 0x00000000 Write at address 0x00600018 (0xffff87440018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff997ff000. Read at address 0x00600018 (0xffff997ff018): 0x00000000 Write at address 0x00600018 (0xffff997ff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb13c0000. Read at address 0x00600018 (0xffffb13c0018): 0x00000000 Write at address 0x00600018 (0xffffb13c0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbbe5000. Read at address 0x00600018 (0xffffbbbe5018): 0x00000000 Write at address 0x00600018 (0xffffbbbe5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff913d2000. Read at address 0x00600018 (0xffff913d2018): 0x00000000 Write at address 0x00600018 (0xffff913d2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9db01000. Read at address 0x00600018 (0xffff9db01018): 0x00000000 Write at address 0x00600018 (0xffff9db01018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb4633000. Read at address 0x00600018 (0xffffb4633018): 0x00000000 Write at address 0x00600018 (0xffffb4633018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3e28000. Read at address 0x00600018 (0xffffb3e28018): 0x00000000 Write at address 0x00600018 (0xffffb3e28018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff806b6000. Read at address 0x00600018 (0xffff806b6018): 0x00000000 Write at address 0x00600018 (0xffff806b6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa21a6000. Read at address 0x00600018 (0xffffa21a6018): 0x00000000 Write at address 0x00600018 (0xffffa21a6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaeab5000. Read at address 0x00600018 (0xffffaeab5018): 0x00000000 Write at address 0x00600018 (0xffffaeab5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff805b9000. Read at address 0x00600018 (0xffff805b9018): 0x00000000 Write at address 0x00600018 (0xffff805b9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9421c000. Read at address 0x00600018 (0xffff9421c018): 0x00000000 Write at address 0x00600018 (0xffff9421c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96cdb000. Read at address 0x00600018 (0xffff96cdb018): 0x00000000 Write at address 0x00600018 (0xffff96cdb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbdbe4000. Read at address 0x00600018 (0xffffbdbe4018): 0x00000000 Write at address 0x00600018 (0xffffbdbe4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba33b000. Read at address 0x00600018 (0xffffba33b018): 0x00000000 Write at address 0x00600018 (0xffffba33b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ba00000. Read at address 0x00600018 (0xffff8ba00018): 0x00000000 Write at address 0x00600018 (0xffff8ba00018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8ac12000. Read at address 0x00600018 (0xffff8ac12018): 0x00000000 Write at address 0x00600018 (0xffff8ac12018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88e30000. Read at address 0x00600018 (0xffff88e30018): 0x00000000 Write at address 0x00600018 (0xffff88e30018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbdb0d000. Read at address 0x00600018 (0xffffbdb0d018): 0x00000000 Write at address 0x00600018 (0xffffbdb0d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa63ee000. Read at address 0x00600018 (0xffffa63ee018): 0x00000000 Write at address 0x00600018 (0xffffa63ee018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb20bb000. Read at address 0x00600018 (0xffffb20bb018): 0x00000000 Write at address 0x00600018 (0xffffb20bb018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fb75000. Read at address 0x00600018 (0xffff8fb75018): 0x00000000 Write at address 0x00600018 (0xffff8fb75018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff993a3000. Read at address 0x00600018 (0xffff993a3018): 0x00000000 Write at address 0x00600018 (0xffff993a3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87aeb000. Read at address 0x00600018 (0xffff87aeb018): 0x00000000 Write at address 0x00600018 (0xffff87aeb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbae1c000. Read at address 0x00600018 (0xffffbae1c018): 0x00000000 Write at address 0x00600018 (0xffffbae1c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0f3f000. Read at address 0x00600018 (0xffffa0f3f018): 0x00000000 Write at address 0x00600018 (0xffffa0f3f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9330d000. Read at address 0x00600018 (0xffff9330d018): 0x00000000 Write at address 0x00600018 (0xffff9330d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff82387000. Read at address 0x00600018 (0xffff82387018): 0x00000000 Write at address 0x00600018 (0xffff82387018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae01a000. Read at address 0x00600018 (0xffffae01a018): 0x00000000 Write at address 0x00600018 (0xffffae01a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff80753000. Read at address 0x00600018 (0xffff80753018): 0x00000000 Write at address 0x00600018 (0xffff80753018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8fd51000. Read at address 0x00600018 (0xffff8fd51018): 0x00000000 Write at address 0x00600018 (0xffff8fd51018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc819000. Read at address 0x00600018 (0xffffbc819018): 0x00000000 Write at address 0x00600018 (0xffffbc819018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7c7a000. Read at address 0x00600018 (0xffffb7c7a018): 0x00000000 Write at address 0x00600018 (0xffffb7c7a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc170000. Read at address 0x00600018 (0xffffbc170018): 0x00000000 Write at address 0x00600018 (0xffffbc170018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa7423000. Read at address 0x00600018 (0xffffa7423018): 0x00000000 Write at address 0x00600018 (0xffffa7423018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9d582000. Read at address 0x00600018 (0xffff9d582018): 0x00000000 Write at address 0x00600018 (0xffff9d582018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d6ab000. Read at address 0x00600018 (0xffff8d6ab018): 0x00000000 Write at address 0x00600018 (0xffff8d6ab018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff898f2000. Read at address 0x00600018 (0xffff898f2018): 0x00000000 Write at address 0x00600018 (0xffff898f2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c3f2000. Read at address 0x00600018 (0xffff9c3f2018): 0x00000000 Write at address 0x00600018 (0xffff9c3f2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb47c0000. Read at address 0x00600018 (0xffffb47c0018): 0x00000000 Write at address 0x00600018 (0xffffb47c0018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85bb5000. Read at address 0x00600018 (0xffff85bb5018): 0x00000000 Write at address 0x00600018 (0xffff85bb5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi0:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaa28c000. Read at address 0x00600018 (0xffffaa28c018): 0x00000000 Write at address 0x00600018 (0xffffaa28c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac732000. Read at address 0x00600018 (0xffffac732018): 0x00000000 Write at address 0x00600018 (0xffffac732018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffae844000. Read at address 0x00600018 (0xffffae844018): 0x00000000 Write at address 0x00600018 (0xffffae844018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 dINIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b941000. Read at address 0x00600018 (0xffff9b941018): 0x00000000 Write at address 0x00600018 (0xffff9b941018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa56d6000. Read at address 0x00600018 (0xffffa56d6018): 0x00000000 Write at address 0x00600018 (0xffffa56d6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi1:dml_code is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff861f6000. Read at address 0x00600018 (0xffff861f6018): 0x00000000 Write at address 0x00600018 (0xffff861f6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff92ca0000. Read at address 0x00600018 (0xffff92ca0018): 0x00000000 Write at address 0x00600018 (0xffff92ca0018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 ubi2:dml_code is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff91f7b000. Read at address 0x00600018 (0xffff91f7b018): 0x00000000 Write at address 0x00600018 (0xffff91f7b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff970be000. Read at address 0x00600018 (0xffff970be018): 0x00000000 Write at address 0x00600018 (0xffff970be018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff92082000. Read at address 0x00600018 (0xffff92082018): 0x00000000 Write at address 0x00600018 (0xffff92082018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa36e6000. Read at address 0x00600018 (0xffffa36e6018): 0x00000000 Write at address 0x00600018 (0xffffa36e6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaaf94000. Read at address 0x00600018 (0xffffaaf94018): 0x00000000 Write at address 0x00600018 (0xffffaaf94018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffad4c6000. Read at address 0x00600018 (0xffffad4c6018): 0x00000000 Write at address 0x00600018 (0xffffad4c6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb3907000. Read at address 0x00600018 (0xffffb3907018): 0x00000000 Write at address 0x00600018 (0xffffb3907018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffab825000. Read at address 0x00600018 (0xffffab825018): 0x00000000 Write at address 0x00600018 (0xffffab825018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85348000. Read at address 0x00600018 (0xffff85348018): 0x00000000 Write at address 0x00600018 (0xffff85348018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a36f000. Read at address 0x00600018 (0xffff8a36f018): 0x00000000 Write at address 0x00600018 (0xffff8a36f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6552000. Read at address 0x00600018 (0xffffa6552018): 0x00000000 Write at address 0x00600018 (0xffffa6552018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff807b8000. Read at address 0x00600018 (0xffff807b8018): 0x00000000 Write at address 0x00600018 (0xffff807b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8777b000. Read at address 0x00600018 (0xffff8777b018): 0x00000000 Write at address 0x00600018 (0xffff8777b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa0463000. Read at address 0x00600018 (0xffffa0463018): 0x00000000 Write at address 0x00600018 (0xffffa0463018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff911c2000. Read at address 0x00600018 (0xffff911c2018): 0x00000000 Write at address 0x00600018 (0xffff911c2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e916000. Read at address 0x00600018 (0xffff8e916018): 0x00000000 Write at address 0x00600018 (0xffff8e916018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cba4000. Read at address 0x00600018 (0xffff9cba4018): 0x00000000 Write at address 0x00600018 (0xffff9cba4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi1:dml_code is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90ced000. Read at address 0x00600018 (0xffff90ced018): 0x00000000 Write at address 0x00600018 (0xffff90ced018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e32e000. Read at address 0x00600018 (0xffff9e32e018): 0x00000000 Write at address 0x00600018 (0xffff9e32e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91fda000. Read at address 0x00600018 (0xffff91fda018): 0x00000000 Write at address 0x00600018 (0xffff91fda018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e75a000. Read at address 0x00600018 (0xffff8e75a018): 0x00000000 Write at address 0x00600018 (0xffff8e75a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbba21000. Read at address 0x00600018 (0xffffbba21018): 0x00000000 Write at address 0x00600018 (0xffffbba21018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81f32000. Read at address 0x00600018 (0xffff81f32018): 0x00000000 Write at address 0x00600018 (0xffff81f32018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9f10000. Read at address 0x00600018 (0xffffb9f10018): 0x00000000 Write at address 0x00600018 (0xffffb9f10018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa761c000. Read at address 0x00600018 (0xffffa761c018): 0x00000000 Write at address 0x00600018 (0xffffa761c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5f0a000. Read at address 0x00600018 (0xffffb5f0a018): 0x00000000 Write at address 0x00600018 (0xffffb5f0a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9d035000. Read at address 0x00600018 (0xffff9d035018): 0x00000000 Write at address 0x00600018 (0xffff9d035018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86d82000. Read at address 0x00600018 (0xffff86d82018): 0x00000000 Write at address 0x00600018 (0xffff86d82018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff972de000. Read at address 0x00600018 (0xffff972de018): 0x00000000 Write at address 0x00600018 (0xffff972de018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ef81000. Read at address 0x00600018 (0xffff8ef81018): 0x00000000 Write at address 0x00600018 (0xffff8ef81018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaae68000. Read at address 0x00600018 (0xffffaae68018): 0x00000000 Write at address 0x00600018 (0xffffaae68018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b065000. Read at address 0x00600018 (0xffff9b065018): 0x00000000 Write at address 0x00600018 (0xffff9b065018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2d36000. Read at address 0x00600018 (0xffffb2d36018): 0x00000000 Write at address 0x00600018 (0xffffb2d36018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae70d000. Read at address 0x00600018 (0xffffae70d018): 0x00000000 Write at address 0x00600018 (0xffffae70d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc0c5000. Read at address 0x00600018 (0xffffbc0c5018): 0x00000000 Write at address 0x00600018 (0xffffbc0c5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9670f000. Read at address 0x00600018 (0xffff9670f018): 0x00000000 Write at address 0x00600018 (0xffff9670f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9347e000. Read at address 0x00600018 (0xffff9347e018): 0x00000000 Write at address 0x00600018 (0xffff9347e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafb19000. Read at address 0x00600018 (0xffffafb19018): 0x00000000 Write at address 0x00600018 (0xffffafb19018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff85ec2000. Read at address 0x00600018 (0xffff85ec2018): 0x00000000 Write at address 0x00600018 (0xffff85ec2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa03ae000. Read at address 0x00600018 (0xffffa03ae018): 0x00000000 Write at address 0x00600018 (0xffffa03ae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff97c46000. Read at address 0x00600018 (0xffff97c46018): 0x00000000 Write at address 0x00600018 (0xffff97c46018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffac5f8000. Read at address 0x00600018 (0xffffac5f8018): 0x00000000 Write at address 0x00600018 (0xffffac5f8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a50e000. Read at address 0x00600018 (0xffff9a50e018): 0x00000000 Write at address 0x00600018 (0xffff9a50e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb4ed1000. Read at address 0x00600018 (0xffffb4ed1018): 0x00000000 Write at address 0x00600018 (0xffffb4ed1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff997d7000. Read at address 0x00600018 (0xffff997d7018): 0x00000000 Write at address 0x00600018 (0xffff997d7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff80605000. Read at address 0x00600018 (0xffff80605018): 0x00000000 Write at address 0x00600018 (0xffff80605018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa426c000. Read at address 0x00600018 (0xffffa426c018): 0x00000000 Write at address 0x00600018 (0xffffa426c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa88f9000. Read at address 0x00600018 (0xffffa88f9018): 0x00000000 Write at address 0x00600018 (0xffffa88f9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95c65000. Read at address 0x00600018 (0xffff95c65018): 0x00000000 Write at address 0x00600018 (0xffff95c65018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8f6fc000. Read at address 0x00600018 (0xffff8f6fc018): 0x00000000 Write at address 0x00600018 (0xffff8f6fc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9c1d9000. Read at address 0x00600018 (0xffff9c1d9018): 0x00000000 Write at address 0x00600018 (0xffff9c1d9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa57f0000. Read at address 0x00600018 (0xffffa57f0018): 0x00000000 Write at address 0x00600018 (0xffffa57f0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8845a000. Read at address 0x00600018 (0xffff8845a018): 0x00000000 Write at address 0x00600018 (0xffff8845a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7d5c000. Read at address 0x00600018 (0xffffb7d5c018): 0x00000000 Write at address 0x00600018 (0xffffb7d5c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9afb3000. Read at address 0x00600018 (0xffff9afb3018): 0x00000000 Write at address 0x00600018 (0xffff9afb3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9434b000. Read at address 0x00600018 (0xffff9434b018): 0x00000000 Write at address 0x00600018 (0xffff9434b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9dfe000. Read at address 0x00600018 (0xffffb9dfe018): 0x00000000 Write at address 0x00600018 (0xffffb9dfe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff97b0d000. Read at address 0x00600018 (0xffff97b0d018): 0x00000000 Write at address 0x00600018 (0xffff97b0d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f2a5000. Read at address 0x00600018 (0xffff8f2a5018): 0x00000000 Write at address 0x00600018 (0xffff8f2a5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8a6c8000. Read at address 0x00600018 (0xffff8a6c8018): 0x00000000 Write at address 0x00600018 (0xffff8a6c8018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91323000. Read at address 0x00600018 (0xffff91323018): 0x00000000 Write at address 0x00600018 (0xffff91323018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3f30000. Read at address 0x00600018 (0xffffa3f30018): 0x00000000 Write at address 0x00600018 (0xffffa3f30018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91940000. Read at address 0x00600018 (0xffff91940018): 0x00000000 Write at address 0x00600018 (0xffff91940018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff95b16000. Read at address 0x00600018 (0xffff95b16018): 0x00000000 Write at address 0x00600018 (0xffff95b16018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa5e68000. Read at address 0x00600018 (0xffffa5e68018): 0x00000000 Write at address 0x00600018 (0xffffa5e68018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89609000. Read at address 0x00600018 (0xffff89609018): 0x00000000 Write at address 0x00600018 (0xffff89609018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5f34000. Read at address 0x00600018 (0xffffb5f34018): 0x00000000 Write at address 0x00600018 (0xffffb5f34018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8ed9a000. Read at address 0x00600018 (0xffff8ed9a018): 0x00000000 Write at address 0x00600018 (0xffff8ed9a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf1d5000. Read at address 0x00600018 (0xffffbf1d5018): 0x00000000 Write at address 0x00600018 (0xffffbf1d5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9ed6000. Read at address 0x00600018 (0xffffb9ed6018): 0x00000000 Write at address 0x00600018 (0xffffb9ed6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb813b000. Read at address 0x00600018 (0xffffb813b018): 0x00000000 Write at address 0x00600018 (0xffffb813b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbec4e000. Read at address 0x00600018 (0xffffbec4e018): 0x00000000 Write at address 0x00600018 (0xffffbec4e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb544f000. Read at address 0x00600018 (0xffffb544f018): 0x00000000 Write at address 0x00600018 (0xffffb544f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83d2c000. Read at address 0x00600018 (0xffff83d2c018): 0x00000000 Write at address 0x00600018 (0xffff83d2c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start 1733 GC [0] 1803 GC [1] 1872 GC [2] Esel version: 3.102.0.0-IAA10.27 1954 GC [3] 2032 GC [4] 2104 GC [5] 2183 GC [6] 2255 GC [7] 2321 GC [8] 2404 GC [9] DML res1: 0 2522 GC [10] 2651 GC [11] 2776 GC [12] 2911 GC [13] 3023 GC [14] 3044 GC [15] 3121 GC [16] Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... 3264 GC [17] SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa786a000. Read at address 0x00600018 (0xffffa786a018): 0x00000000 Write at address 0x00600018 (0xffffa786a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa9402000. Read at address 0x00600018 (0xffffa9402018): 0x00000000 Write at address 0x00600018 (0xffffa9402018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb6e74000. Read at address 0x00600018 (0xffffb6e74018): 0x00000000 Write at address 0x00600018 (0xffffb6e74018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e4a4000. Read at address 0x00600018 (0xffff8e4a4018): 0x00000000 Write at address 0x00600018 (0xffff8e4a4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac3a9000. Read at address 0x00600018 (0xffffac3a9018): 0x00000000 Write at address 0x00600018 (0xffffac3a9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8f98e000. Read at address 0x00600018 (0xffff8f98e018): 0x00000000 Write at address 0x00600018 (0xffff8f98e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac13a000. Read at address 0x00600018 (0xffffac13a018): 0x00000000 Write at address 0x00600018 (0xffffac13a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff988a4000. Read at address 0x00600018 (0xffff988a4018): 0x00000000 Write at address 0x00600018 (0xffff988a4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffac18a000. Read at address 0x00600018 (0xffffac18a018): 0x00000000 Write at address 0x00600018 (0xffffac18a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa5541000. Read at address 0x00600018 (0xffffa5541018): 0x00000000 Write at address 0x00600018 (0xffffa5541018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffabcee000. Read at address 0x00600018 (0xffffabcee018): 0x00000000 Write at address 0x00600018 (0xffffabcee018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaac1d000. Read at address 0x00600018 (0xffffaac1d018): 0x00000000 Write at address 0x00600018 (0xffffaac1d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff90844000. Read at address 0x00600018 (0xffff90844018): 0x00000000 Write at address 0x00600018 (0xffff90844018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac3b9000. Read at address 0x00600018 (0xffffac3b9018): 0x00000000 Write at address 0x00600018 (0xffffac3b9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa891a000. Read at address 0x00600018 (0xffffa891a018): 0x00000000 Write at address 0x00600018 (0xffffa891a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85ea5000. Read at address 0x00600018 (0xffff85ea5018): 0x00000000 Write at address 0x00600018 (0xffff85ea5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94d69000. Read at address 0x00600018 (0xffff94d69018): 0x00000000 Write at address 0x00600018 (0xffff94d69018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa7582000. Read at address 0x00600018 (0xffffa7582018): 0x00000000 Write at address 0x00600018 (0xffffa7582018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb27f5000. Read at address 0x00600018 (0xffffb27f5018): 0x00000000 Write at address 0x00600018 (0xffffb27f5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa9dec000. Read at address 0x00600018 (0xffffa9dec018): 0x00000000 Write at address 0x00600018 (0xffffa9dec018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb5051000. Read at address 0x00600018 (0xffffb5051018): 0x00000000 Write at address 0x00600018 (0xffffb5051018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9813a000. Read at address 0x00600018 (0xffff9813a018): 0x00000000 Write at address 0x00600018 (0xffff9813a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8ebd6000. Read at address 0x00600018 (0xffff8ebd6018): 0x00000000 Write at address 0x00600018 (0xffff8ebd6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbd28b000. Read at address 0x00600018 (0xffffbd28b018): 0x00000000 Write at address 0x00600018 (0xffffbd28b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff87aab000. Read at address 0x00600018 (0xffff87aab018): 0x00000000 Write at address 0x00600018 (0xffff87aab018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaed6b000. Read at address 0x00600018 (0xffffaed6b018): 0x00000000 Write at address 0x00600018 (0xffffaed6b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbc26000. Read at address 0x00600018 (0xffffbbc26018): 0x00000000 Write at address 0x00600018 (0xffffbbc26018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb25b4000. Read at address 0x00600018 (0xffffb25b4018): 0x00000000 Write at address 0x00600018 (0xffffb25b4018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbc55000. Read at address 0x00600018 (0xffffbbc55018): 0x00000000 Write at address 0x00600018 (0xffffbbc55018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95f09000. Read at address 0x00600018 (0xffff95f09018): 0x00000000 Write at address 0x00600018 (0xffff95f09018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96fa2000. Read at address 0x00600018 (0xffff96fa2018): 0x00000000 Write at address 0x00600018 (0xffff96fa2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffaffd3000. Read at address 0x00600018 (0xffffaffd3018): 0x00000000 Write at address 0x00600018 (0xffffaffd3018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb529a000. Read at address 0x00600018 (0xffffb529a018): 0x00000000 Write at address 0x00600018 (0xffffb529a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffab5f0000. Read at address 0x00600018 (0xffffab5f0018): 0x00000000 Write at address 0x00600018 (0xffffab5f0018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb5346000. Read at address 0x00600018 (0xffffb5346018): 0x00000000 Write at address 0x00600018 (0xffffb5346018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8544f000. Read at address 0x00600018 (0xffff8544f018): 0x00000000 Write at address 0x00600018 (0xffff8544f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff990c0000. Read at address 0x00600018 (0xffff990c0018): 0x00000000 Write at address 0x00600018 (0xffff990c0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab1cd000. Read at address 0x00600018 (0xffffab1cd018): 0x00000000 Write at address 0x00600018 (0xffffab1cd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa667f000. Read at address 0x00600018 (0xffffa667f018): 0x00000000 Write at address 0x00600018 (0xffffa667f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d44b000. Read at address 0x00600018 (0xffff8d44b018): 0x00000000 Write at address 0x00600018 (0xffff8d44b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbacbd000. Read at address 0x00600018 (0xffffbacbd018): 0x00000000 Write at address 0x00600018 (0xffffbacbd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff868fa000. Read at address 0x00600018 (0xffff868fa018): 0x00000000 Write at address 0x00600018 (0xffff868fa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb28d3000. Read at address 0x00600018 (0xffffb28d3018): 0x00000000 Write at address 0x00600018 (0xffffb28d3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff917c3000. Read at address 0x00600018 (0xffff917c3018): 0x00000000 Write at address 0x00600018 (0xffff917c3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb409a000. Read at address 0x00600018 (0xffffb409a018): 0x00000000 Write at address 0x00600018 (0xffffb409a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 220 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95f06000. Read at address 0x00600018 (0xffff95f06018): 0x00000000 Write at address 0x00600018 (0xffff95f06018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbea1b000. Read at address 0x00600018 (0xffffbea1b018): 0x00000000 Write at address 0x00600018 (0xffffbea1b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff88b48000. Read at address 0x00600018 (0xffff88b48018): 0x00000000 Write at address 0x00600018 (0xffff88b48018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93caf000. Read at address 0x00600018 (0xffff93caf018): 0x00000000 Write at address 0x00600018 (0xffff93caf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbde25000. Read at address 0x00600018 (0xffffbde25018): 0x00000000 Write at address 0x00600018 (0xffffbde25018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8ae2c000. Read at address 0x00600018 (0xffff8ae2c018): 0x00000000 Write at address 0x00600018 (0xffff8ae2c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff81bef000. Read at address 0x00600018 (0xffff81bef018): 0x00000000 Write at address 0x00600018 (0xffff81bef018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fbd7000. Read at address 0x00600018 (0xffff7fbd7018): 0x00000000 Write at address 0x00600018 (0xffff7fbd7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99142000. Read at address 0x00600018 (0xffff99142018): 0x00000000 Write at address 0x00600018 (0xffff99142018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa155a000. Read at address 0x00600018 (0xffffa155a018): 0x00000000 Write at address 0x00600018 (0xffffa155a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e48e000. Read at address 0x00600018 (0xffff8e48e018): 0x00000000 Write at address 0x00600018 (0xffff8e48e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff874a6000. Read at address 0x00600018 (0xffff874a6018): 0x00000000 Write at address 0x00600018 (0xffff874a6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8f83f000. Read at address 0x00600018 (0xffff8f83f018): 0x00000000 Write at address 0x00600018 (0xffff8f83f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7e39000. Read at address 0x00600018 (0xffffb7e39018): 0x00000000 Write at address 0x00600018 (0xffffb7e39018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb3137000. Read at address 0x00600018 (0xffffb3137018): 0x00000000 Write at address 0x00600018 (0xffffb3137018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb172b000. Read at address 0x00600018 (0xffffb172b018): 0x00000000 Write at address 0x00600018 (0xffffb172b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff93ea7000. Read at address 0x00600018 (0xffff93ea7018): 0x00000000 Write at address 0x00600018 (0xffff93ea7018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac7c2000. Read at address 0x00600018 (0xffffac7c2018): 0x00000000 Write at address 0x00600018 (0xffffac7c2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb0a47000. Read at address 0x00600018 (0xffffb0a47018): 0x00000000 Write at address 0x00600018 (0xffffb0a47018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff94921000. Read at address 0x00600018 (0xffff94921018): 0x00000000 Write at address 0x00600018 (0xffff94921018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b6d4000. Read at address 0x00600018 (0xffff8b6d4018): 0x00000000 Write at address 0x00600018 (0xffff8b6d4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbca19000. Read at address 0x00600018 (0xffffbca19018): 0x00000000 Write at address 0x00600018 (0xffffbca19018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b39c000. Read at address 0x00600018 (0xffff8b39c018): 0x00000000 Write at address 0x00600018 (0xffff8b39c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8fb2c000. Read at address 0x00600018 (0xffff8fb2c018): 0x00000000 Write at address 0x00600018 (0xffff8fb2c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80a6b000. Read at address 0x00600018 (0xffff80a6b018): 0x00000000 Write at address 0x00600018 (0xffff80a6b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8e848000. Read at address 0x00600018 (0xffff8e848018): 0x00000000 Write at address 0x00600018 (0xffff8e848018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a38c000. Read at address 0x00600018 (0xffff9a38c018): 0x00000000 Write at address 0x00600018 (0xffff9a38c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8df54000. Read at address 0x00600018 (0xffff8df54018): 0x00000000 Write at address 0x00600018 (0xffff8df54018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 220 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbae42000. Read at address 0x00600018 (0xffffbae42018): 0x00000000 Write at address 0x00600018 (0xffffbae42018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff91a7e000. Read at address 0x00600018 (0xffff91a7e018): 0x00000000 Write at address 0x00600018 (0xffff91a7e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3713000. Read at address 0x00600018 (0xffffa3713018): 0x00000000 Write at address 0x00600018 (0xffffa3713018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3806000. Read at address 0x00600018 (0xffffb3806018): 0x00000000 Write at address 0x00600018 (0xffffb3806018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8024d000. Read at address 0x00600018 (0xffff8024d018): 0x00000000 Write at address 0x00600018 (0xffff8024d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98044000. Read at address 0x00600018 (0xffff98044018): 0x00000000 Write at address 0x00600018 (0xffff98044018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff94908000. Read at address 0x00600018 (0xffff94908018): 0x00000000 Write at address 0x00600018 (0xffff94908018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85ed6000. Read at address 0x00600018 (0xffff85ed6018): 0x00000000 Write at address 0x00600018 (0xffff85ed6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c49a000. Read at address 0x00600018 (0xffff9c49a018): 0x00000000 Write at address 0x00600018 (0xffff9c49a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbe678000. Read at address 0x00600018 (0xffffbe678018): 0x00000000 Write at address 0x00600018 (0xffffbe678018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa3ffe000. Read at address 0x00600018 (0xffffa3ffe018): 0x00000000 Write at address 0x00600018 (0xffffa3ffe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa70ee000. Read at address 0x00600018 (0xffffa70ee018): 0x00000000 Write at address 0x00600018 (0xffffa70ee018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9ad4000. Read at address 0x00600018 (0xffffa9ad4018): 0x00000000 Write at address 0x00600018 (0xffffa9ad4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92e4f000. Read at address 0x00600018 (0xffff92e4f018): 0x00000000 Write at address 0x00600018 (0xffff92e4f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9153000. Read at address 0x00600018 (0xffffa9153018): 0x00000000 Write at address 0x00600018 (0xffffa9153018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3e8b000. Read at address 0x00600018 (0xffffa3e8b018): 0x00000000 Write at address 0x00600018 (0xffffa3e8b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff912ab000. Read at address 0x00600018 (0xffff912ab018): 0x00000000 Write at address 0x00600018 (0xffff912ab018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbc5ee000. Read at address 0x00600018 (0xffffbc5ee018): 0x00000000 Write at address 0x00600018 (0xffffbc5ee018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9dcd000. Read at address 0x00600018 (0xffffa9dcd018): 0x00000000 Write at address 0x00600018 (0xffffa9dcd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff97e3e000. Read at address 0x00600018 (0xffff97e3e018): 0x00000000 Write at address 0x00600018 (0xffff97e3e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9dba0000. Read at address 0x00600018 (0xffff9dba0018): 0x00000000 Write at address 0x00600018 (0xffff9dba0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out rpmsg_char_open: _rpmsg_char_open_eptdev failed Ipc_InitDriver: rpmsg_char_open failed, retrying... Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86cea000. Read at address 0x00600018 (0xffff86cea018): 0x00000000 Write at address 0x00600018 (0xffff86cea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4318000. Read at address 0x00600018 (0xffffb4318018): 0x00000000 Write at address 0x00600018 (0xffffb4318018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbace5000. Read at address 0x00600018 (0xffffbace5018): 0x00000000 Write at address 0x00600018 (0xffffbace5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 237 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3b0b000. Read at address 0x00600018 (0xffffa3b0b018): 0x00000000 Write at address 0x00600018 (0xffffa3b0b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffafb6b000. Read at address 0x00600018 (0xffffafb6b018): 0x00000000 Write at address 0x00600018 (0xffffafb6b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9787e000. Read at address 0x00600018 (0xffff9787e018): 0x00000000 Write at address 0x00600018 (0xffff9787e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80956000. Read at address 0x00600018 (0xffff80956018): 0x00000000 Write at address 0x00600018 (0xffff80956018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8447000. Read at address 0x00600018 (0xffffa8447018): 0x00000000 Write at address 0x00600018 (0xffffa8447018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f7ed000. Read at address 0x00600018 (0xffff9f7ed018): 0x00000000 Write at address 0x00600018 (0xffff9f7ed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf25d000. Read at address 0x00600018 (0xffffaf25d018): 0x00000000 Write at address 0x00600018 (0xffffaf25d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb272e000. Read at address 0x00600018 (0xffffb272e018): 0x00000000 Write at address 0x00600018 (0xffffb272e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fc22000. Read at address 0x00600018 (0xffff7fc22018): 0x00000000 Write at address 0x00600018 (0xffff7fc22018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb74eb000. Read at address 0x00600018 (0xffffb74eb018): 0x00000000 Write at address 0x00600018 (0xffffb74eb018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b8af000. Read at address 0x00600018 (0xffff8b8af018): 0x00000000 Write at address 0x00600018 (0xffff8b8af018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa664a000. Read at address 0x00600018 (0xffffa664a018): 0x00000000 Write at address 0x00600018 (0xffffa664a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7fd4000. Read at address 0x00600018 (0xffffb7fd4018): 0x00000000 Write at address 0x00600018 (0xffffb7fd4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac1e9000. Read at address 0x00600018 (0xffffac1e9018): 0x00000000 Write at address 0x00600018 (0xffffac1e9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8d5e3000. Read at address 0x00600018 (0xffff8d5e3018): 0x00000000 Write at address 0x00600018 (0xffff8d5e3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa9a3c000. Read at address 0x00600018 (0xffffa9a3c018): 0x00000000 Write at address 0x00600018 (0xffffa9a3c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff85c15000. Read at address 0x00600018 (0xffff85c15018): 0x00000000 Write at address 0x00600018 (0xffff85c15018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa5259000. Read at address 0x00600018 (0xffffa5259018): 0x00000000 Write at address 0x00600018 (0xffffa5259018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff99776000. Read at address 0x00600018 (0xffff99776018): 0x00000000 Write at address 0x00600018 (0xffff99776018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8080d000. Read at address 0x00600018 (0xffff8080d018): 0x00000000 Write at address 0x00600018 (0xffff8080d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf194000. Read at address 0x00600018 (0xffffbf194018): 0x00000000 Write at address 0x00600018 (0xffffbf194018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c8df000. Read at address 0x00600018 (0xffff9c8df018): 0x00000000 Write at address 0x00600018 (0xffff9c8df018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cffe000. Read at address 0x00600018 (0xffff9cffe018): 0x00000000 Write at address 0x00600018 (0xffff9cffe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb533000. Read at address 0x00600018 (0xffffbb533018): 0x00000000 Write at address 0x00600018 (0xffffbb533018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4742000. Read at address 0x00600018 (0xffffb4742018): 0x00000000 Write at address 0x00600018 (0xffffb4742018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff895c5000. net.ipv6.conf.all.addr_gen_mode = 0 Read at address 0x00600018 (0xffff895c5018): 0x00000000 Write at address 0x00600018 (0xffff895c5018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e064000. Read at address 0x00600018 (0xffff9e064018): 0x00000000 Write at address 0x00600018 (0xffff9e064018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff86a00000. Read at address 0x00600018 (0xffff86a00018): 0x00000000 Write at address 0x00600018 (0xffff86a00018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5a8d000. Read at address 0x00600018 (0xffffa5a8d018): 0x00000000 Write at address 0x00600018 (0xffffa5a8d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf5ca000. Read at address 0x00600018 (0xffffbf5ca018): 0x00000000 Write at address 0x00600018 (0xffffbf5ca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi2:animations is mounted. ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3c92000. Read at address 0x00600018 (0xffffa3c92018): 0x00000000 Write at address 0x00600018 (0xffffa3c92018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffaa83d000. Read at address 0x00600018 (0xffffaa83d018): 0x00000000 Write at address 0x00600018 (0xffffaa83d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98311000. Read at address 0x00600018 (0xffff98311018): 0x00000000 Write at address 0x00600018 (0xffff98311018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0f08000. Read at address 0x00600018 (0xffffa0f08018): 0x00000000 Write at address 0x00600018 (0xffffa0f08018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff888d9000. Read at address 0x00600018 (0xffff888d9018): 0x00000000 Write at address 0x00600018 (0xffff888d9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb54dc000. Read at address 0x00600018 (0xffffb54dc018): 0x00000000 Write at address 0x00600018 (0xffffb54dc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff885d0000. Read at address 0x00600018 (0xffff885d0018): 0x00000000 Write at address 0x00600018 (0xffff885d0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 236 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff83021000. Read at address 0x00600018 (0xffff83021018): 0x00000000 Write at address 0x00600018 (0xffff83021018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5e6a000. Read at address 0x00600018 (0xffffa5e6a018): 0x00000000 Write at address 0x00600018 (0xffffa5e6a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbc438000. Read at address 0x00600018 (0xffffbc438018): 0x00000000 Write at address 0x00600018 (0xffffbc438018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff94eca000. Read at address 0x00600018 (0xffff94eca018): 0x00000000 Write at address 0x00600018 (0xffff94eca018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa697a000. Read at address 0x00600018 (0xffffa697a018): 0x00000000 Write at address 0x00600018 (0xffffa697a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80837000. Read at address 0x00600018 (0xffff80837018): 0x00000000 Write at address 0x00600018 (0xffff80837018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa2006000. Read at address 0x00600018 (0xffffa2006018): 0x00000000 Write at address 0x00600018 (0xffffa2006018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90597000. Read at address 0x00600018 (0xffff90597018): 0x00000000 Write at address 0x00600018 (0xffff90597018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa47bc000. Read at address 0x00600018 (0xffffa47bc018): 0x00000000 Write at address 0x00600018 (0xffffa47bc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb72e9000. Read at address 0x00600018 (0xffffb72e9018): 0x00000000 Write at address 0x00600018 (0xffffb72e9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffadae1000. Read at address 0x00600018 (0xffffadae1018): 0x00000000 Write at address 0x00600018 (0xffffadae1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa568a000. Read at address 0x00600018 (0xffffa568a018): 0x00000000 Write at address 0x00600018 (0xffffa568a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a92e000. Read at address 0x00600018 (0xffff9a92e018): 0x00000000 Write at address 0x00600018 (0xffff9a92e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff90d47000. Read at address 0x00600018 (0xffff90d47018): 0x00000000 Write at address 0x00600018 (0xffff90d47018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1d11000. Read at address 0x00600018 (0xffffb1d11018): 0x00000000 Write at address 0x00600018 (0xffffb1d11018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa82e6000. Read at address 0x00600018 (0xffffa82e6018): 0x00000000 Write at address 0x00600018 (0xffffa82e6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0ac6000. Read at address 0x00600018 (0xffffa0ac6018): 0x00000000 Write at address 0x00600018 (0xffffa0ac6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffad1f4000. Read at address 0x00600018 (0xffffad1f4018): 0x00000000 Write at address 0x00600018 (0xffffad1f4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa78bd000. Read at address 0x00600018 (0xffffa78bd018): 0x00000000 Write at address 0x00600018 (0xffffa78bd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9657d000. Read at address 0x00600018 (0xffff9657d018): 0x00000000 Write at address 0x00600018 (0xffff9657d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb63d3000. Read at address 0x00600018 (0xffffb63d3018): 0x00000000 Write at address 0x00600018 (0xffffb63d3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb95e8000. Read at address 0x00600018 (0xffffb95e8018): 0x00000000 Write at address 0x00600018 (0xffffb95e8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffac5b6000. Read at address 0x00600018 (0xffffac5b6018): 0x00000000 Write at address 0x00600018 (0xffffac5b6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88b56000. Read at address 0x00600018 (0xffff88b56018): 0x00000000 Write at address 0x00600018 (0xffff88b56018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97503000. Read at address 0x00600018 (0xffff97503018): 0x00000000 Write at address 0x00600018 (0xffff97503018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb955d000. Read at address 0x00600018 (0xffffb955d018): 0x00000000 Write at address 0x00600018 (0xffffb955d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaded4000. Read at address 0x00600018 (0xffffaded4018): 0x00000000 Write at address 0x00600018 (0xffffaded4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d4d3000. Read at address 0x00600018 (0xffff8d4d3018): 0x00000000 Write at address 0x00600018 (0xffff8d4d3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9e691000. Read at address 0x00600018 (0xffff9e691018): 0x00000000 Write at address 0x00600018 (0xffff9e691018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff93cf1000. Read at address 0x00600018 (0xffff93cf1018): 0x00000000 Write at address 0x00600018 (0xffff93cf1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb32cd000. Read at address 0x00600018 (0xffffb32cd018): 0x00000000 Write at address 0x00600018 (0xffffb32cd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9863e000. Read at address 0x00600018 (0xffff9863e018): 0x00000000 Write at address 0x00600018 (0xffff9863e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8f14a000. Read at address 0x00600018 (0xffff8f14a018): 0x00000000 Write at address 0x00600018 (0xffff8f14a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff834de000. Read at address 0x00600018 (0xffff834de018): 0x00000000 Write at address 0x00600018 (0xffff834de018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc930000. Read at address 0x00600018 (0xffffbc930018): 0x00000000 Write at address 0x00600018 (0xffffbc930018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8da07000. Read at address 0x00600018 (0xffff8da07018): 0x00000000 Write at address 0x00600018 (0xffff8da07018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81d46000. Read at address 0x00600018 (0xffff81d46018): 0x00000000 Write at address 0x00600018 (0xffff81d46018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff900f4000. Read at address 0x00600018 (0xffff900f4018): 0x00000000 Write at address 0x00600018 (0xffff900f4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80258000. Read at address 0x00600018 (0xffff80258018): 0x00000000 Write at address 0x00600018 (0xffff80258018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d1a2000. Read at address 0x00600018 (0xffff8d1a2018): 0x00000000 Write at address 0x00600018 (0xffff8d1a2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9ddb000. Read at address 0x00600018 (0xffffa9ddb018): 0x00000000 Write at address 0x00600018 (0xffffa9ddb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa759b000. Read at address 0x00600018 (0xffffa759b018): 0x00000000 Write at address 0x00600018 (0xffffa759b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9dfa5000. Read at address 0x00600018 (0xffff9dfa5018): 0x00000000 Write at address 0x00600018 (0xffff9dfa5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff7ff80000. Read at address 0x00600018 (0xffff7ff80018): 0x00000000 Write at address 0x00600018 (0xffff7ff80018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb30e000. Read at address 0x00600018 (0xffffbb30e018): 0x00000000 Write at address 0x00600018 (0xffffbb30e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cdff000. Read at address 0x00600018 (0xffff9cdff018): 0x00000000 Write at address 0x00600018 (0xffff9cdff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb4d21000. Read at address 0x00600018 (0xffffb4d21018): 0x00000000 Write at address 0x00600018 (0xffffb4d21018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff88c6f000. Read at address 0x00600018 (0xffff88c6f018): 0x00000000 Write at address 0x00600018 (0xffff88c6f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88db3000. Read at address 0x00600018 (0xffff88db3018): 0x00000000 Write at address 0x00600018 (0xffff88db3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa12c8000. Read at address 0x00600018 (0xffffa12c8018): 0x00000000 Write at address 0x00600018 (0xffffa12c8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8701000. Read at address 0x00600018 (0xffffb8701018): 0x00000000 Write at address 0x00600018 (0xffffb8701018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa588b000. Read at address 0x00600018 (0xffffa588b018): 0x00000000 Write at address 0x00600018 (0xffffa588b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb2480000. Read at address 0x00600018 (0xffffb2480018): 0x00000000 Write at address 0x00600018 (0xffffb2480018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bc41000. Read at address 0x00600018 (0xffff9bc41018): 0x00000000 Write at address 0x00600018 (0xffff9bc41018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffae9c8000. Read at address 0x00600018 (0xffffae9c8018): 0x00000000 Write at address 0x00600018 (0xffffae9c8018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9d905000. Read at address 0x00600018 (0xffff9d905018): 0x00000000 Write at address 0x00600018 (0xffff9d905018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa98f3000. Read at address 0x00600018 (0xffffa98f3018): 0x00000000 Write at address 0x00600018 (0xffffa98f3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff983ee000. Read at address 0x00600018 (0xffff983ee018): 0x00000000 Write at address 0x00600018 (0xffff983ee018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa36fc000. Read at address 0x00600018 (0xffffa36fc018): 0x00000000 Write at address 0x00600018 (0xffffa36fc018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb52cc000. Read at address 0x00600018 (0xffffb52cc018): 0x00000000 Write at address 0x00600018 (0xffffb52cc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4bd9000. Read at address 0x00600018 (0xffffb4bd9018): 0x00000000 Write at address 0x00600018 (0xffffb4bd9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa1478000. Read at address 0x00600018 (0xffffa1478018): 0x00000000 Write at address 0x00600018 (0xffffa1478018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c2d8000. Read at address 0x00600018 (0xffff9c2d8018): 0x00000000 Write at address 0x00600018 (0xffff9c2d8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb02fb000. Read at address 0x00600018 (0xffffb02fb018): 0x00000000 Write at address 0x00600018 (0xffffb02fb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbed13000. Read at address 0x00600018 (0xffffbed13018): 0x00000000 Write at address 0x00600018 (0xffffbed13018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbbf15000. Read at address 0x00600018 (0xffffbbf15018): 0x00000000 Write at address 0x00600018 (0xffffbbf15018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff87903000. Read at address 0x00600018 (0xffff87903018): 0x00000000 Write at address 0x00600018 (0xffff87903018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbc42a000. Read at address 0x00600018 (0xffffbc42a018): 0x00000000 Write at address 0x00600018 (0xffffbc42a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ec10000. Read at address 0x00600018 (0xffff8ec10018): 0x00000000 Write at address 0x00600018 (0xffff8ec10018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9087a000. Read at address 0x00600018 (0xffff9087a018): 0x00000000 Write at address 0x00600018 (0xffff9087a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d030000. Read at address 0x00600018 (0xffff9d030018): 0x00000000 Write at address 0x00600018 (0xffff9d030018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff86859000. Read at address 0x00600018 (0xffff86859018): 0x00000000 Write at address 0x00600018 (0xffff86859018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4385000. Read at address 0x00600018 (0xffffb4385018): 0x00000000 Write at address 0x00600018 (0xffffb4385018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff999a9000. Read at address 0x00600018 (0xffff999a9018): 0x00000000 Write at address 0x00600018 (0xffff999a9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8d113000. Read at address 0x00600018 (0xffff8d113018): 0x00000000 Write at address 0x00600018 (0xffff8d113018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa950f000. Read at address 0x00600018 (0xffffa950f018): 0x00000000 Write at address 0x00600018 (0xffffa950f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9869b000. Read at address 0x00600018 (0xffff9869b018): 0x00000000 Write at address 0x00600018 (0xffff9869b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa353c000. Read at address 0x00600018 (0xffffa353c018): 0x00000000 Write at address 0x00600018 (0xffffa353c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9eb7c000. Read at address 0x00600018 (0xffff9eb7c018): 0x00000000 Write at address 0x00600018 (0xffff9eb7c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff96360000. Read at address 0x00600018 (0xffff96360018): 0x00000000 Write at address 0x00600018 (0xffff96360018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa39c000. Read at address 0x00600018 (0xffffaa39c018): 0x00000000 Write at address 0x00600018 (0xffffaa39c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8449e000. Read at address 0x00600018 (0xffff8449e018): 0x00000000 Write at address 0x00600018 (0xffff8449e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff841b3000. Read at address 0x00600018 (0xffff841b3018): 0x00000000 Write at address 0x00600018 (0xffff841b3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd620000. Read at address 0x00600018 (0xffffbd620018): 0x00000000 Write at address 0x00600018 (0xffffbd620018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbb8e3000. Read at address 0x00600018 (0xffffbb8e3018): 0x00000000 Write at address 0x00600018 (0xffffbb8e3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb5c69000. Read at address 0x00600018 (0xffffb5c69018): 0x00000000 Write at address 0x00600018 (0xffffb5c69018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbd44000. Read at address 0x00600018 (0xffffbbd44018): 0x00000000 Write at address 0x00600018 (0xffffbbd44018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff991b8000. Read at address 0x00600018 (0xffff991b8018): 0x00000000 Write at address 0x00600018 (0xffff991b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbdc3c000. Read at address 0x00600018 (0xffffbdc3c018): 0x00000000 Write at address 0x00600018 (0xffffbdc3c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff962b8000. Read at address 0x00600018 (0xffff962b8018): 0x00000000 Write at address 0x00600018 (0xffff962b8018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97d99000. Read at address 0x00600018 (0xffff97d99018): 0x00000000 Write at address 0x00600018 (0xffff97d99018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbf053000. Read at address 0x00600018 (0xffffbf053018): 0x00000000 Write at address 0x00600018 (0xffffbf053018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81471000. Read at address 0x00600018 (0xffff81471018): 0x00000000 Write at address 0x00600018 (0xffff81471018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff97107000. Read at address 0x00600018 (0xffff97107018): 0x00000000 Write at address 0x00600018 (0xffff97107018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa94e5000. Read at address 0x00600018 (0xffffa94e5018): 0x00000000 Write at address 0x00600018 (0xffffa94e5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa379a000. Read at address 0x00600018 (0xffffa379a018): 0x00000000 Write at address 0x00600018 (0xffffa379a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbbd06000. Read at address 0x00600018 (0xffffbbd06018): 0x00000000 Write at address 0x00600018 (0xffffbbd06018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff873b8000. Read at address 0x00600018 (0xffff873b8018): 0x00000000 Write at address 0x00600018 (0xffff873b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b667000. Read at address 0x00600018 (0xffff8b667018): 0x00000000 Write at address 0x00600018 (0xffff8b667018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff935b1000. Read at address 0x00600018 (0xffff935b1018): 0x00000000 Write at address 0x00600018 (0xffff935b1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd6db000. Read at address 0x00600018 (0xffffbd6db018): 0x00000000 Write at address 0x00600018 (0xffffbd6db018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff89cd5000. Read at address 0x00600018 (0xffff89cd5018): 0x00000000 Write at address 0x00600018 (0xffff89cd5018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba716000. Read at address 0x00600018 (0xffffba716018): 0x00000000 Write at address 0x00600018 (0xffffba716018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad8f2000. Read at address 0x00600018 (0xffffad8f2018): 0x00000000 Write at address 0x00600018 (0xffffad8f2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ae32000. Read at address 0x00600018 (0xffff8ae32018): 0x00000000 Write at address 0x00600018 (0xffff8ae32018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3268000. Read at address 0x00600018 (0xffffb3268018): 0x00000000 Write at address 0x00600018 (0xffffb3268018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9025b000. Read at address 0x00600018 (0xffff9025b018): 0x00000000 Write at address 0x00600018 (0xffff9025b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff82e4c000. Read at address 0x00600018 (0xffff82e4c018): 0x00000000 Write at address 0x00600018 (0xffff82e4c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaed82000. Read at address 0x00600018 (0xffffaed82018): 0x00000000 Write at address 0x00600018 (0xffffaed82018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbd84000. Read at address 0x00600018 (0xffffbbd84018): 0x00000000 Write at address 0x00600018 (0xffffbbd84018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8d8cb000. Read at address 0x00600018 (0xffff8d8cb018): 0x00000000 Write at address 0x00600018 (0xffff8d8cb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7d44000. Read at address 0x00600018 (0xffffa7d44018): 0x00000000 Write at address 0x00600018 (0xffffa7d44018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ef5d000. Read at address 0x00600018 (0xffff8ef5d018): 0x00000000 Write at address 0x00600018 (0xffff8ef5d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5b5f000. Read at address 0x00600018 (0xffffb5b5f018): 0x00000000 Write at address 0x00600018 (0xffffb5b5f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa838000. Read at address 0x00600018 (0xffffaa838018): 0x00000000 Write at address 0x00600018 (0xffffaa838018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff976b3000. Read at address 0x00600018 (0xffff976b3018): 0x00000000 Write at address 0x00600018 (0xffff976b3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82140000. Read at address 0x00600018 (0xffff82140018): 0x00000000 Write at address 0x00600018 (0xffff82140018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff980b6000. Read at address 0x00600018 (0xffff980b6018): 0x00000000 Write at address 0x00600018 (0xffff980b6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb7ae6000. Read at address 0x00600018 (0xffffb7ae6018): 0x00000000 Write at address 0x00600018 (0xffffb7ae6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81145000. Read at address 0x00600018 (0xffff81145018): 0x00000000 Write at address 0x00600018 (0xffff81145018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e001000. Read at address 0x00600018 (0xffff8e001018): 0x00000000 Write at address 0x00600018 (0xffff8e001018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7f8c5000. Read at address 0x00600018 (0xffff7f8c5018): 0x00000000 Write at address 0x00600018 (0xffff7f8c5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa966d000. Read at address 0x00600018 (0xffffa966d018): 0x00000000 Write at address 0x00600018 (0xffffa966d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ebba000. Read at address 0x00600018 (0xffff8ebba018): 0x00000000 Write at address 0x00600018 (0xffff8ebba018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87517000. Read at address 0x00600018 (0xffff87517018): 0x00000000 Write at address 0x00600018 (0xffff87517018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa1943000. Read at address 0x00600018 (0xffffa1943018): 0x00000000 Write at address 0x00600018 (0xffffa1943018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8efa7000. Read at address 0x00600018 (0xffff8efa7018): 0x00000000 Write at address 0x00600018 (0xffff8efa7018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93c2a000. Read at address 0x00600018 (0xffff93c2a018): 0x00000000 Write at address 0x00600018 (0xffff93c2a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86392000. Read at address 0x00600018 (0xffff86392018): 0x00000000 Write at address 0x00600018 (0xffff86392018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb057c000. Read at address 0x00600018 (0xffffb057c018): 0x00000000 Write at address 0x00600018 (0xffffb057c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb072d000. Read at address 0x00600018 (0xffffb072d018): 0x00000000 Write at address 0x00600018 (0xffffb072d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86c83000. Read at address 0x00600018 (0xffff86c83018): 0x00000000 Write at address 0x00600018 (0xffff86c83018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe87c000. Read at address 0x00600018 (0xffffbe87c018): 0x00000000 Write at address 0x00600018 (0xffffbe87c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff924a4000. Read at address 0x00600018 (0xffff924a4018): 0x00000000 Write at address 0x00600018 (0xffff924a4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9352000. Read at address 0x00600018 (0xffffa9352018): 0x00000000 Write at address 0x00600018 (0xffffa9352018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7893000. Read at address 0x00600018 (0xffffb7893018): 0x00000000 Write at address 0x00600018 (0xffffb7893018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb7e81000. Read at address 0x00600018 (0xffffb7e81018): 0x00000000 Write at address 0x00600018 (0xffffb7e81018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff959f8000. Read at address 0x00600018 (0xffff959f8018): 0x00000000 Write at address 0x00600018 (0xffff959f8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9d114000. Read at address 0x00600018 (0xffff9d114018): 0x00000000 Write at address 0x00600018 (0xffff9d114018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff88504000. Read at address 0x00600018 (0xffff88504018): 0x00000000 Write at address 0x00600018 (0xffff88504018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9759000. Read at address 0x00600018 (0xffffb9759018): 0x00000000 Write at address 0x00600018 (0xffffb9759018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 ubi2:animations is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff95237000. Read at address 0x00600018 (0xffff95237018): 0x00000000 Write at address 0x00600018 (0xffff95237018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa89cc000. Read at address 0x00600018 (0xffffa89cc018): 0x00000000 Write at address 0x00600018 (0xffffa89cc018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa8b48000. Read at address 0x00600018 (0xffffa8b48018): 0x00000000 Write at address 0x00600018 (0xffffa8b48018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb6be9000. Read at address 0x00600018 (0xffffb6be9018): 0x00000000 Write at address 0x00600018 (0xffffb6be9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 236 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88dff000. Read at address 0x00600018 (0xffff88dff018): 0x00000000 Write at address 0x00600018 (0xffff88dff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffab345000. Read at address 0x00600018 (0xffffab345018): 0x00000000 Write at address 0x00600018 (0xffffab345018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8aff5000. Read at address 0x00600018 (0xffff8aff5018): 0x00000000 Write at address 0x00600018 (0xffff8aff5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e46c000. Read at address 0x00600018 (0xffff9e46c018): 0x00000000 Write at address 0x00600018 (0xffff9e46c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f8c2000. Read at address 0x00600018 (0xffff9f8c2018): 0x00000000 Write at address 0x00600018 (0xffff9f8c2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa751b000. Read at address 0x00600018 (0xffffa751b018): 0x00000000 Write at address 0x00600018 (0xffffa751b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8522b000. Read at address 0x00600018 (0xffff8522b018): 0x00000000 Write at address 0x00600018 (0xffff8522b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa1481000. Read at address 0x00600018 (0xffffa1481018): 0x00000000 Write at address 0x00600018 (0xffffa1481018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff97a97000. Read at address 0x00600018 (0xffff97a97018): 0x00000000 Write at address 0x00600018 (0xffff97a97018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff866aa000. Read at address 0x00600018 (0xffff866aa018): 0x00000000 Write at address 0x00600018 (0xffff866aa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae52d000. Read at address 0x00600018 (0xffffae52d018): 0x00000000 Write at address 0x00600018 (0xffffae52d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa4939000. Read at address 0x00600018 (0xffffa4939018): 0x00000000 Write at address 0x00600018 (0xffffa4939018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff860f0000. Read at address 0x00600018 (0xffff860f0018): 0x00000000 Write at address 0x00600018 (0xffff860f0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4029000. Read at address 0x00600018 (0xffffb4029018): 0x00000000 Write at address 0x00600018 (0xffffb4029018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa11d7000. Read at address 0x00600018 (0xffffa11d7018): 0x00000000 Write at address 0x00600018 (0xffffa11d7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88a50000. Read at address 0x00600018 (0xffff88a50018): 0x00000000 Write at address 0x00600018 (0xffff88a50018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82531000. Read at address 0x00600018 (0xffff82531018): 0x00000000 Write at address 0x00600018 (0xffff82531018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8bc66000. Read at address 0x00600018 (0xffff8bc66018): 0x00000000 Write at address 0x00600018 (0xffff8bc66018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4c9c000. Read at address 0x00600018 (0xffffa4c9c018): 0x00000000 Write at address 0x00600018 (0xffffa4c9c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa1a9e000. Read at address 0x00600018 (0xffffa1a9e018): 0x00000000 Write at address 0x00600018 (0xffffa1a9e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb9e89000. Read at address 0x00600018 (0xffffb9e89018): 0x00000000 Write at address 0x00600018 (0xffffb9e89018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99838000. Read at address 0x00600018 (0xffff99838018): 0x00000000 Write at address 0x00600018 (0xffff99838018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85076000. Read at address 0x00600018 (0xffff85076018): 0x00000000 Write at address 0x00600018 (0xffff85076018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b8ea000. Read at address 0x00600018 (0xffff8b8ea018): 0x00000000 Write at address 0x00600018 (0xffff8b8ea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82546000. Read at address 0x00600018 (0xffff82546018): 0x00000000 Write at address 0x00600018 (0xffff82546018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffad158000. Read at address 0x00600018 (0xffffad158018): 0x00000000 Write at address 0x00600018 (0xffffad158018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb85dc000. Read at address 0x00600018 (0xffffb85dc018): 0x00000000 Write at address 0x00600018 (0xffffb85dc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa065e000. Read at address 0x00600018 (0xffffa065e018): 0x00000000 Write at address 0x00600018 (0xffffa065e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d377000. Read at address 0x00600018 (0xffff8d377018): 0x00000000 Write at address 0x00600018 (0xffff8d377018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb37a5000. Read at address 0x00600018 (0xffffb37a5018): 0x00000000 Write at address 0x00600018 (0xffffb37a5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9264e000. Read at address 0x00600018 (0xffff9264e018): 0x00000000 Write at address 0x00600018 (0xffff9264e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb86b1000. Read at address 0x00600018 (0xffffb86b1018): 0x00000000 Write at address 0x00600018 (0xffffb86b1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbaf05000. Read at address 0x00600018 (0xffffbaf05018): 0x00000000 Write at address 0x00600018 (0xffffbaf05018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadde7000. Read at address 0x00600018 (0xffffadde7018): 0x00000000 Write at address 0x00600018 (0xffffadde7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8d178000. Read at address 0x00600018 (0xffff8d178018): 0x00000000 Write at address 0x00600018 (0xffff8d178018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff94a34000. Read at address 0x00600018 (0xffff94a34018): 0x00000000 Write at address 0x00600018 (0xffff94a34018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbad17000. Read at address 0x00600018 (0xffffbad17018): 0x00000000 Write at address 0x00600018 (0xffffbad17018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba3dc000. Read at address 0x00600018 (0xffffba3dc018): 0x00000000 Write at address 0x00600018 (0xffffba3dc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa3fd5000. Read at address 0x00600018 (0xffffa3fd5018): 0x00000000 Write at address 0x00600018 (0xffffa3fd5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9a5d0000. Read at address 0x00600018 (0xffff9a5d0018): 0x00000000 Write at address 0x00600018 (0xffff9a5d0018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f527000. Read at address 0x00600018 (0xffff9f527018): 0x00000000 Write at address 0x00600018 (0xffff9f527018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1fe3000. Read at address 0x00600018 (0xffffa1fe3018): 0x00000000 Write at address 0x00600018 (0xffffa1fe3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff92331000. Read at address 0x00600018 (0xffff92331018): 0x00000000 Write at address 0x00600018 (0xffff92331018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb1360000. Read at address 0x00600018 (0xffffb1360018): 0x00000000 Write at address 0x00600018 (0xffffb1360018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff945e7000. Read at address 0x00600018 (0xffff945e7018): 0x00000000 Write at address 0x00600018 (0xffff945e7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa41e0000. Read at address 0x00600018 (0xffffa41e0018): 0x00000000 Write at address 0x00600018 (0xffffa41e0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fabc000. Read at address 0x00600018 (0xffff8fabc018): 0x00000000 Write at address 0x00600018 (0xffff8fabc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89b2a000. Read at address 0x00600018 (0xffff89b2a018): 0x00000000 Write at address 0x00600018 (0xffff89b2a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa127b000. Read at address 0x00600018 (0xffffa127b018): 0x00000000 Write at address 0x00600018 (0xffffa127b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91749000. Read at address 0x00600018 (0xffff91749018): 0x00000000 Write at address 0x00600018 (0xffff91749018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab17b000. Read at address 0x00600018 (0xffffab17b018): 0x00000000 Write at address 0x00600018 (0xffffab17b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98fd1000. Read at address 0x00600018 (0xffff98fd1018): 0x00000000 Write at address 0x00600018 (0xffff98fd1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbd01a000. Read at address 0x00600018 (0xffffbd01a018): 0x00000000 Write at address 0x00600018 (0xffffbd01a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94893000. Read at address 0x00600018 (0xffff94893018): 0x00000000 Write at address 0x00600018 (0xffff94893018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb530d000. Read at address 0x00600018 (0xffffb530d018): 0x00000000 Write at address 0x00600018 (0xffffb530d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88408000. Read at address 0x00600018 (0xffff88408018): 0x00000000 Write at address 0x00600018 (0xffff88408018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb062f000. Read at address 0x00600018 (0xffffb062f018): 0x00000000 Write at address 0x00600018 (0xffffb062f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac606000. Read at address 0x00600018 (0xffffac606018): 0x00000000 Write at address 0x00600018 (0xffffac606018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa435e000. Read at address 0x00600018 (0xffffa435e018): 0x00000000 Write at address 0x00600018 (0xffffa435e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98549000. Read at address 0x00600018 (0xffff98549018): 0x00000000 Write at address 0x00600018 (0xffff98549018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff839e0000. Read at address 0x00600018 (0xffff839e0018): 0x00000000 Write at address 0x00600018 (0xffff839e0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa66ad000. Read at address 0x00600018 (0xffffa66ad018): 0x00000000 Write at address 0x00600018 (0xffffa66ad018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb80b5000. Read at address 0x00600018 (0xffffb80b5018): 0x00000000 Write at address 0x00600018 (0xffffb80b5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0a8d000. Read at address 0x00600018 (0xffffa0a8d018): 0x00000000 Write at address 0x00600018 (0xffffa0a8d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9e97000. Read at address 0x00600018 (0xffffb9e97018): 0x00000000 Write at address 0x00600018 (0xffffb9e97018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95695000. Read at address 0x00600018 (0xffff95695018): 0x00000000 Write at address 0x00600018 (0xffff95695018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94f4a000. Read at address 0x00600018 (0xffff94f4a018): 0x00000000 Write at address 0x00600018 (0xffff94f4a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa807a000. Read at address 0x00600018 (0xffffa807a018): 0x00000000 Write at address 0x00600018 (0xffffa807a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e1e4000. Read at address 0x00600018 (0xffff9e1e4018): 0x00000000 Write at address 0x00600018 (0xffff9e1e4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb2988000. Read at address 0x00600018 (0xffffb2988018): 0x00000000 Write at address 0x00600018 (0xffffb2988018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86020000. Read at address 0x00600018 (0xffff86020018): 0x00000000 Write at address 0x00600018 (0xffff86020018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83ca0000. Read at address 0x00600018 (0xffff83ca0018): 0x00000000 Write at address 0x00600018 (0xffff83ca0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9ea92000. Read at address 0x00600018 (0xffff9ea92018): 0x00000000 Write at address 0x00600018 (0xffff9ea92018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd780000. Read at address 0x00600018 (0xffffbd780018): 0x00000000 Write at address 0x00600018 (0xffffbd780018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9a2f000. Read at address 0x00600018 (0xffffa9a2f018): 0x00000000 Write at address 0x00600018 (0xffffa9a2f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffab44d000. Read at address 0x00600018 (0xffffab44d018): 0x00000000 Write at address 0x00600018 (0xffffab44d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb74f0000. Read at address 0x00600018 (0xffffb74f0018): 0x00000000 Write at address 0x00600018 (0xffffb74f0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa662f000. Read at address 0x00600018 (0xffffa662f018): 0x00000000 Write at address 0x00600018 (0xffffa662f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe9e4000. Read at address 0x00600018 (0xffffbe9e4018): 0x00000000 Write at address 0x00600018 (0xffffbe9e4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb30bd000. Read at address 0x00600018 (0xffffb30bd018): 0x00000000 Write at address 0x00600018 (0xffffb30bd018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96cfb000. Read at address 0x00600018 (0xffff96cfb018): 0x00000000 Write at address 0x00600018 (0xffff96cfb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95122000. Read at address 0x00600018 (0xffff95122018): 0x00000000 Write at address 0x00600018 (0xffff95122018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbafd9000. Read at address 0x00600018 (0xffffbafd9018): 0x00000000 Write at address 0x00600018 (0xffffbafd9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82815000. Read at address 0x00600018 (0xffff82815018): 0x00000000 Write at address 0x00600018 (0xffff82815018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92de2000. Read at address 0x00600018 (0xffff92de2018): 0x00000000 Write at address 0x00600018 (0xffff92de2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8300d000. Read at address 0x00600018 (0xffff8300d018): 0x00000000 Write at address 0x00600018 (0xffff8300d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbc7bf000. Read at address 0x00600018 (0xffffbc7bf018): 0x00000000 Write at address 0x00600018 (0xffffbc7bf018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96200000. Read at address 0x00600018 (0xffff96200018): 0x00000000 Write at address 0x00600018 (0xffff96200018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffba94a000. Read at address 0x00600018 (0xffffba94a018): 0x00000000 Write at address 0x00600018 (0xffffba94a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8fca2000. Read at address 0x00600018 (0xffff8fca2018): 0x00000000 Write at address 0x00600018 (0xffff8fca2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9819f000. Read at address 0x00600018 (0xffff9819f018): 0x00000000 Write at address 0x00600018 (0xffff9819f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 220 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae3b9000. Read at address 0x00600018 (0xffffae3b9018): 0x00000000 Write at address 0x00600018 (0xffffae3b9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb1af000. Read at address 0x00600018 (0xffffbb1af018): 0x00000000 Write at address 0x00600018 (0xffffbb1af018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 220 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff94583000. Read at address 0x00600018 (0xffff94583018): 0x00000000 Write at address 0x00600018 (0xffff94583018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa56c9000. Read at address 0x00600018 (0xffffa56c9018): 0x00000000 Write at address 0x00600018 (0xffffa56c9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff96911000. Read at address 0x00600018 (0xffff96911018): 0x00000000 Write at address 0x00600018 (0xffff96911018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff802eb000. Read at address 0x00600018 (0xffff802eb018): 0x00000000 Write at address 0x00600018 (0xffff802eb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9748a000. Read at address 0x00600018 (0xffff9748a018): 0x00000000 Write at address 0x00600018 (0xffff9748a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8023e000. Read at address 0x00600018 (0xffff8023e018): 0x00000000 Write at address 0x00600018 (0xffff8023e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff909b5000. Read at address 0x00600018 (0xffff909b5018): 0x00000000 Write at address 0x00600018 (0xffff909b5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92365000. Read at address 0x00600018 (0xffff92365018): 0x00000000 Write at address 0x00600018 (0xffff92365018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbeada000. Read at address 0x00600018 (0xffffbeada018): 0x00000000 Write at address 0x00600018 (0xffffbeada018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi1:dml_code is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89e12000. Read at address 0x00600018 (0xffff89e12018): 0x00000000 Write at address 0x00600018 (0xffff89e12018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out _rpmsg_char_find_rproc: 78000000.r5f device is mostly yet to be created! rpmsg_char_open: _rpmsg_char_find_rproc failed Ipc_InitDriver: rpmsg_char_open failed, retrying... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9aaee000. Read at address 0x00600018 (0xffff9aaee018): 0x00000000 Write at address 0x00600018 (0xffff9aaee018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2efa000. Read at address 0x00600018 (0xffffb2efa018): 0x00000000 Write at address 0x00600018 (0xffffb2efa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ba00000. Read at address 0x00600018 (0xffff8ba00018): 0x00000000 Write at address 0x00600018 (0xffff8ba00018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2921000. Read at address 0x00600018 (0xffffa2921018): 0x00000000 Write at address 0x00600018 (0xffffa2921018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d09a000. Read at address 0x00600018 (0xffff8d09a018): 0x00000000 Write at address 0x00600018 (0xffff8d09a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd0c2000. Read at address 0x00600018 (0xffffbd0c2018): 0x00000000 Write at address 0x00600018 (0xffffbd0c2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8e1bc000. Read at address 0x00600018 (0xffff8e1bc018): 0x00000000 Write at address 0x00600018 (0xffff8e1bc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9866d000. Read at address 0x00600018 (0xffff9866d018): 0x00000000 Write at address 0x00600018 (0xffff9866d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8c8e6000. Read at address 0x00600018 (0xffff8c8e6018): 0x00000000 Write at address 0x00600018 (0xffff8c8e6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82740000. Read at address 0x00600018 (0xffff82740018): 0x00000000 Write at address 0x00600018 (0xffff82740018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91c30000. Read at address 0x00600018 (0xffff91c30018): 0x00000000 Write at address 0x00600018 (0xffff91c30018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa3689000. Read at address 0x00600018 (0xffffa3689018): 0x00000000 Write at address 0x00600018 (0xffffa3689018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa77fa000. Read at address 0x00600018 (0xffffa77fa018): 0x00000000 Write at address 0x00600018 (0xffffa77fa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa27df000. Read at address 0x00600018 (0xffffa27df018): 0x00000000 Write at address 0x00600018 (0xffffa27df018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9168c000. Read at address 0x00600018 (0xffff9168c018): 0x00000000 Write at address 0x00600018 (0xffff9168c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 ubi2:dml_code is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa589b000. Read at address 0x00600018 (0xffffa589b018): 0x00000000 Write at address 0x00600018 (0xffffa589b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb10cd000. Read at address 0x00600018 (0xffffb10cd018): 0x00000000 Write at address 0x00600018 (0xffffb10cd018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b95c000. Read at address 0x00600018 (0xffff9b95c018): 0x00000000 Write at address 0x00600018 (0xffff9b95c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b2b5000. Read at address 0x00600018 (0xffff9b2b5018): 0x00000000 Write at address 0x00600018 (0xffff9b2b5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80d7f000. Read at address 0x00600018 (0xffff80d7f018): 0x00000000 Write at address 0x00600018 (0xffff80d7f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbd28e000. Read at address 0x00600018 (0xffffbd28e018): 0x00000000 Write at address 0x00600018 (0xffffbd28e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf51a000. Read at address 0x00600018 (0xffffbf51a018): 0x00000000 Write at address 0x00600018 (0xffffbf51a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff846a2000. Read at address 0x00600018 (0xffff846a2018): 0x00000000 Write at address 0x00600018 (0xffff846a2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa58ea000. Read at address 0x00600018 (0xffffa58ea018): 0x00000000 Write at address 0x00600018 (0xffffa58ea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa10d8000. Read at address 0x00600018 (0xffffa10d8018): 0x00000000 Write at address 0x00600018 (0xffffa10d8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb3120000. Read at address 0x00600018 (0xffffb3120018): 0x00000000 Write at address 0x00600018 (0xffffb3120018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb633a000. Read at address 0x00600018 (0xffffb633a018): 0x00000000 Write at address 0x00600018 (0xffffb633a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff97166000. Read at address 0x00600018 (0xffff97166018): 0x00000000 Write at address 0x00600018 (0xffff97166018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1c04000. Read at address 0x00600018 (0xffffb1c04018): 0x00000000 Write at address 0x00600018 (0xffffb1c04018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6b55000. Read at address 0x00600018 (0xffffa6b55018): 0x00000000 Write at address 0x00600018 (0xffffa6b55018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff814a1000. Read at address 0x00600018 (0xffff814a1018): 0x00000000 Write at address 0x00600018 (0xffff814a1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf440000. Read at address 0x00600018 (0xffffaf440018): 0x00000000 Write at address 0x00600018 (0xffffaf440018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa345b000. Read at address 0x00600018 (0xffffa345b018): 0x00000000 Write at address 0x00600018 (0xffffa345b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9738e000. Read at address 0x00600018 (0xffff9738e018): 0x00000000 Write at address 0x00600018 (0xffff9738e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac20b000. Read at address 0x00600018 (0xffffac20b018): 0x00000000 Write at address 0x00600018 (0xffffac20b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd5b4000. Read at address 0x00600018 (0xffffbd5b4018): 0x00000000 Write at address 0x00600018 (0xffffbd5b4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fe78000. Read at address 0x00600018 (0xffff7fe78018): 0x00000000 Write at address 0x00600018 (0xffff7fe78018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb52ca000. Read at address 0x00600018 (0xffffb52ca018): 0x00000000 Write at address 0x00600018 (0xffffb52ca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b11c000. Read at address 0x00600018 (0xffff9b11c018): 0x00000000 Write at address 0x00600018 (0xffff9b11c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff901ed000. Read at address 0x00600018 (0xffff901ed018): 0x00000000 Write at address 0x00600018 (0xffff901ed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae229000. Read at address 0x00600018 (0xffffae229018): 0x00000000 Write at address 0x00600018 (0xffffae229018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff92bc9000. Read at address 0x00600018 (0xffff92bc9018): 0x00000000 Write at address 0x00600018 (0xffff92bc9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa2434000. Read at address 0x00600018 (0xffffa2434018): 0x00000000 Write at address 0x00600018 (0xffffa2434018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9460f000. Read at address 0x00600018 (0xffff9460f018): 0x00000000 Write at address 0x00600018 (0xffff9460f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa632c000. Read at address 0x00600018 (0xffffa632c018): 0x00000000 Write at address 0x00600018 (0xffffa632c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99e24000. Read at address 0x00600018 (0xffff99e24018): 0x00000000 Write at address 0x00600018 (0xffff99e24018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi2:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85998000. Read at address 0x00600018 (0xffff85998018): 0x00000000 Write at address 0x00600018 (0xffff85998018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fcb3000. Read at address 0x00600018 (0xffff7fcb3018): 0x00000000 Write at address 0x00600018 (0xffff7fcb3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8cf7c000. Read at address 0x00600018 (0xffff8cf7c018): 0x00000000 Write at address 0x00600018 (0xffff8cf7c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff89963000. Read at address 0x00600018 (0xffff89963018): 0x00000000 Write at address 0x00600018 (0xffff89963018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93d5e000. Read at address 0x00600018 (0xffff93d5e018): 0x00000000 Write at address 0x00600018 (0xffff93d5e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff826ba000. Read at address 0x00600018 (0xffff826ba018): 0x00000000 Write at address 0x00600018 (0xffff826ba018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0ef5000. Read at address 0x00600018 (0xffffb0ef5018): 0x00000000 Write at address 0x00600018 (0xffffb0ef5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 220 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a82e000. Read at address 0x00600018 (0xffff9a82e018): 0x00000000 Write at address 0x00600018 (0xffff9a82e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9dd6e000. Read at address 0x00600018 (0xffff9dd6e018): 0x00000000 Write at address 0x00600018 (0xffff9dd6e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi1:animations is mounted. mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9bdbd000. Read at address 0x00600018 (0xffff9bdbd018): 0x00000000 Write at address 0x00600018 (0xffff9bdbd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffaf2c6000. Read at address 0x00600018 (0xffffaf2c6018): 0x00000000 Write at address 0x00600018 (0xffffaf2c6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99096000. Read at address 0x00600018 (0xffff99096018): 0x00000000 Write at address 0x00600018 (0xffff99096018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f909000. Read at address 0x00600018 (0xffff8f909018): 0x00000000 Write at address 0x00600018 (0xffff8f909018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa4aa2000. Read at address 0x00600018 (0xffffa4aa2018): 0x00000000 Write at address 0x00600018 (0xffffa4aa2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8a07000. Read at address 0x00600018 (0xffffb8a07018): 0x00000000 Write at address 0x00600018 (0xffffb8a07018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb4097000. Read at address 0x00600018 (0xffffb4097018): 0x00000000 Write at address 0x00600018 (0xffffb4097018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f140000. Read at address 0x00600018 (0xffff9f140018): 0x00000000 Write at address 0x00600018 (0xffff9f140018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa44c6000. Read at address 0x00600018 (0xffffa44c6018): 0x00000000 Write at address 0x00600018 (0xffffa44c6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9062f000. Read at address 0x00600018 (0xffff9062f018): 0x00000000 Write at address 0x00600018 (0xffff9062f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb99e0000. Read at address 0x00600018 (0xffffb99e0018): 0x00000000 Write at address 0x00600018 (0xffffb99e0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe772000. Read at address 0x00600018 (0xffffbe772018): 0x00000000 Write at address 0x00600018 (0xffffbe772018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa681f000. Read at address 0x00600018 (0xffffa681f018): 0x00000000 Write at address 0x00600018 (0xffffa681f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae591000. Read at address 0x00600018 (0xffffae591018): 0x00000000 Write at address 0x00600018 (0xffffae591018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff915ee000. Read at address 0x00600018 (0xffff915ee018): 0x00000000 Write at address 0x00600018 (0xffff915ee018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ae09000. Read at address 0x00600018 (0xffff9ae09018): 0x00000000 Write at address 0x00600018 (0xffff9ae09018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8dcda000. Read at address 0x00600018 (0xffff8dcda018): 0x00000000 Write at address 0x00600018 (0xffff8dcda018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8fb60000. Read at address 0x00600018 (0xffff8fb60018): 0x00000000 Write at address 0x00600018 (0xffff8fb60018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa178b000. Read at address 0x00600018 (0xffffa178b018): 0x00000000 Write at address 0x00600018 (0xffffa178b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3bd2000. Read at address 0x00600018 (0xffffa3bd2018): 0x00000000 Write at address 0x00600018 (0xffffa3bd2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c939000. Read at address 0x00600018 (0xffff8c939018): 0x00000000 Write at address 0x00600018 (0xffff8c939018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbad80000. Read at address 0x00600018 (0xffffbad80018): 0x00000000 Write at address 0x00600018 (0xffffbad80018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f946000. Read at address 0x00600018 (0xffff9f946018): 0x00000000 Write at address 0x00600018 (0xffff9f946018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8688b000. Read at address 0x00600018 (0xffff8688b018): 0x00000000 Write at address 0x00600018 (0xffff8688b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb7d37000. Read at address 0x00600018 (0xffffb7d37018): 0x00000000 Write at address 0x00600018 (0xffffb7d37018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbcb18000. Read at address 0x00600018 (0xffffbcb18018): 0x00000000 Write at address 0x00600018 (0xffffbcb18018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8aa8000. Read at address 0x00600018 (0xffffa8aa8018): 0x00000000 Write at address 0x00600018 (0xffffa8aa8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab9c5000. Read at address 0x00600018 (0xffffab9c5018): 0x00000000 Write at address 0x00600018 (0xffffab9c5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ad64000. Read at address 0x00600018 (0xffff9ad64018): 0x00000000 Write at address 0x00600018 (0xffff9ad64018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff966e4000. Read at address 0x00600018 (0xffff966e4018): 0x00000000 Write at address 0x00600018 (0xffff966e4018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c51d000. Read at address 0x00600018 (0xffff8c51d018): 0x00000000 Write at address 0x00600018 (0xffff8c51d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8fb47000. Read at address 0x00600018 (0xffff8fb47018): 0x00000000 Write at address 0x00600018 (0xffff8fb47018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba2e4000. Read at address 0x00600018 (0xffffba2e4018): 0x00000000 Write at address 0x00600018 (0xffffba2e4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb8197000. Read at address 0x00600018 (0xffffb8197018): 0x00000000 Write at address 0x00600018 (0xffffb8197018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0e8a000. Read at address 0x00600018 (0xffffa0e8a018): 0x00000000 Write at address 0x00600018 (0xffffa0e8a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90b53000. Read at address 0x00600018 (0xffff90b53018): 0x00000000 Write at address 0x00600018 (0xffff90b53018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbdef0000. Read at address 0x00600018 (0xffffbdef0018): 0x00000000 Write at address 0x00600018 (0xffffbdef0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa82b9000. Read at address 0x00600018 (0xffffa82b9018): 0x00000000 Write at address 0x00600018 (0xffffa82b9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93acc000. Read at address 0x00600018 (0xffff93acc018): 0x00000000 Write at address 0x00600018 (0xffff93acc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa153f000. Read at address 0x00600018 (0xffffa153f018): 0x00000000 Write at address 0x00600018 (0xffffa153f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbae93000. Read at address 0x00600018 (0xffffbae93018): 0x00000000 Write at address 0x00600018 (0xffffbae93018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffba54d000. Read at address 0x00600018 (0xffffba54d018): 0x00000000 Write at address 0x00600018 (0xffffba54d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff91206000. Read at address 0x00600018 (0xffff91206018): 0x00000000 Write at address 0x00600018 (0xffff91206018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaea7a000. Read at address 0x00600018 (0xffffaea7a018): 0x00000000 Write at address 0x00600018 (0xffffaea7a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa6e8f000. Read at address 0x00600018 (0xffffa6e8f018): 0x00000000 Write at address 0x00600018 (0xffffa6e8f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbf1c6000. Read at address 0x00600018 (0xffffbf1c6018): 0x00000000 Write at address 0x00600018 (0xffffbf1c6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87b4e000. Read at address 0x00600018 (0xffff87b4e018): 0x00000000 Write at address 0x00600018 (0xffff87b4e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86626000. Read at address 0x00600018 (0xffff86626018): 0x00000000 Write at address 0x00600018 (0xffff86626018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9f46f000. Read at address 0x00600018 (0xffff9f46f018): 0x00000000 Write at address 0x00600018 (0xffff9f46f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9a1ff000. Read at address 0x00600018 (0xffff9a1ff018): 0x00000000 Write at address 0x00600018 (0xffff9a1ff018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb1006000. Read at address 0x00600018 (0xffffb1006018): 0x00000000 Write at address 0x00600018 (0xffffb1006018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8034000. Read at address 0x00600018 (0xffffb8034018): 0x00000000 Write at address 0x00600018 (0xffffb8034018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91f7d000. Read at address 0x00600018 (0xffff91f7d018): 0x00000000 Write at address 0x00600018 (0xffff91f7d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff828fc000. Read at address 0x00600018 (0xffff828fc018): 0x00000000 Write at address 0x00600018 (0xffff828fc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbdc6000. Read at address 0x00600018 (0xffffbbdc6018): 0x00000000 Write at address 0x00600018 (0xffffbbdc6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff992b2000. Read at address 0x00600018 (0xffff992b2018): 0x00000000 Write at address 0x00600018 (0xffff992b2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb9a0c000. Read at address 0x00600018 (0xffffb9a0c018): 0x00000000 Write at address 0x00600018 (0xffffb9a0c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff999f9000. Read at address 0x00600018 (0xffff999f9018): 0x00000000 Write at address 0x00600018 (0xffff999f9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90a5a000. Read at address 0x00600018 (0xffff90a5a018): 0x00000000 Write at address 0x00600018 (0xffff90a5a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffba4ed000. Read at address 0x00600018 (0xffffba4ed018): 0x00000000 Write at address 0x00600018 (0xffffba4ed018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff94812000. Read at address 0x00600018 (0xffff94812018): 0x00000000 Write at address 0x00600018 (0xffff94812018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd98e000. Read at address 0x00600018 (0xffffbd98e018): 0x00000000 Write at address 0x00600018 (0xffffbd98e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf9d2000. Read at address 0x00600018 (0xffffaf9d2018): 0x00000000 Write at address 0x00600018 (0xffffaf9d2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb590d000. Read at address 0x00600018 (0xffffb590d018): 0x00000000 Write at address 0x00600018 (0xffffb590d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaa1ce000. Read at address 0x00600018 (0xffffaa1ce018): 0x00000000 Write at address 0x00600018 (0xffffaa1ce018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8376000. Read at address 0x00600018 (0xffffb8376018): 0x00000000 Write at address 0x00600018 (0xffffb8376018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a063000. Read at address 0x00600018 (0xffff9a063018): 0x00000000 Write at address 0x00600018 (0xffff9a063018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ba13000. Read at address 0x00600018 (0xffff9ba13018): 0x00000000 Write at address 0x00600018 (0xffff9ba13018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83cb1000. Read at address 0x00600018 (0xffff83cb1018): 0x00000000 Write at address 0x00600018 (0xffff83cb1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb59f1000. Read at address 0x00600018 (0xffffb59f1018): 0x00000000 Write at address 0x00600018 (0xffffb59f1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff803c3000. Read at address 0x00600018 (0xffff803c3018): 0x00000000 Write at address 0x00600018 (0xffff803c3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff918e8000. Read at address 0x00600018 (0xffff918e8018): 0x00000000 Write at address 0x00600018 (0xffff918e8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9b5b6000. Read at address 0x00600018 (0xffff9b5b6018): 0x00000000 Write at address 0x00600018 (0xffff9b5b6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e99c000. Read at address 0x00600018 (0xffff9e99c018): 0x00000000 Write at address 0x00600018 (0xffff9e99c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb1e59000. Read at address 0x00600018 (0xffffb1e59018): 0x00000000 Write at address 0x00600018 (0xffffb1e59018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3389000. Read at address 0x00600018 (0xffffb3389018): 0x00000000 Write at address 0x00600018 (0xffffb3389018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 net.ipv6.conf.all.disable_ipv6 = 0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8b6b000. Read at address 0x00600018 (0xffffa8b6b018): 0x00000000 Write at address 0x00600018 (0xffffa8b6b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86b11000. Read at address 0x00600018 (0xffff86b11018): 0x00000000 Write at address 0x00600018 (0xffff86b11018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc171000. Read at address 0x00600018 (0xffffbc171018): 0x00000000 Write at address 0x00600018 (0xffffbc171018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80822000. Read at address 0x00600018 (0xffff80822018): 0x00000000 Write at address 0x00600018 (0xffff80822018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88fc5000. Read at address 0x00600018 (0xffff88fc5018): 0x00000000 Write at address 0x00600018 (0xffff88fc5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84554000. Read at address 0x00600018 (0xffff84554018): 0x00000000 Write at address 0x00600018 (0xffff84554018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8fed2000. Read at address 0x00600018 (0xffff8fed2018): 0x00000000 Write at address 0x00600018 (0xffff8fed2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c033000. Read at address 0x00600018 (0xffff8c033018): 0x00000000 Write at address 0x00600018 (0xffff8c033018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi0:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff96ed1000. Read at address 0x00600018 (0xffff96ed1018): 0x00000000 Write at address 0x00600018 (0xffff96ed1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2424000. Read at address 0x00600018 (0xffffb2424018): 0x00000000 Write at address 0x00600018 (0xffffb2424018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ab3e000. Read at address 0x00600018 (0xffff9ab3e018): 0x00000000 Write at address 0x00600018 (0xffff9ab3e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff929e2000. Read at address 0x00600018 (0xffff929e2018): 0x00000000 Write at address 0x00600018 (0xffff929e2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82aeb000. Read at address 0x00600018 (0xffff82aeb018): 0x00000000 Write at address 0x00600018 (0xffff82aeb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95848000. Read at address 0x00600018 (0xffff95848018): 0x00000000 Write at address 0x00600018 (0xffff95848018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa29cf000. Read at address 0x00600018 (0xffffa29cf018): 0x00000000 Write at address 0x00600018 (0xffffa29cf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb77be000. Read at address 0x00600018 (0xffffb77be018): 0x00000000 Write at address 0x00600018 (0xffffb77be018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbcadd000. Read at address 0x00600018 (0xffffbcadd018): 0x00000000 Write at address 0x00600018 (0xffffbcadd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa2a0d000. Read at address 0x00600018 (0xffffa2a0d018): 0x00000000 Write at address 0x00600018 (0xffffa2a0d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b96e000. Read at address 0x00600018 (0xffff8b96e018): 0x00000000 Write at address 0x00600018 (0xffff8b96e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bdd4000. Read at address 0x00600018 (0xffff9bdd4018): 0x00000000 Write at address 0x00600018 (0xffff9bdd4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4f18000. Read at address 0x00600018 (0xffffa4f18018): 0x00000000 Write at address 0x00600018 (0xffffa4f18018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2a8e000. Read at address 0x00600018 (0xffffb2a8e018): 0x00000000 Write at address 0x00600018 (0xffffb2a8e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7cc5000. Read at address 0x00600018 (0xffffa7cc5018): 0x00000000 Write at address 0x00600018 (0xffffa7cc5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5c48000. Read at address 0x00600018 (0xffffb5c48018): 0x00000000 Write at address 0x00600018 (0xffffb5c48018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9413000. Read at address 0x00600018 (0xffffa9413018): 0x00000000 Write at address 0x00600018 (0xffffa9413018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc0c9000. Read at address 0x00600018 (0xffffbc0c9018): 0x00000000 Write at address 0x00600018 (0xffffbc0c9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbcb3f000. Read at address 0x00600018 (0xffffbcb3f018): 0x00000000 Write at address 0x00600018 (0xffffbcb3f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99beb000. Read at address 0x00600018 (0xffff99beb018): 0x00000000 Write at address 0x00600018 (0xffff99beb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff86fbf000. Read at address 0x00600018 (0xffff86fbf018): 0x00000000 Write at address 0x00600018 (0xffff86fbf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9da26000. Read at address 0x00600018 (0xffff9da26018): 0x00000000 Write at address 0x00600018 (0xffff9da26018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7bb1000. Read at address 0x00600018 (0xffffa7bb1018): 0x00000000 Write at address 0x00600018 (0xffffa7bb1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8fb19000. Read at address 0x00600018 (0xffff8fb19018): 0x00000000 Write at address 0x00600018 (0xffff8fb19018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8e9c000. Read at address 0x00600018 (0xffffa8e9c018): 0x00000000 Write at address 0x00600018 (0xffffa8e9c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf22d000. Read at address 0x00600018 (0xffffaf22d018): 0x00000000 Write at address 0x00600018 (0xffffaf22d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8eae5000. Read at address 0x00600018 (0xffff8eae5018): 0x00000000 Write at address 0x00600018 (0xffff8eae5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2e03000. Read at address 0x00600018 (0xffffb2e03018): 0x00000000 Write at address 0x00600018 (0xffffb2e03018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9ec5000. Read at address 0x00600018 (0xffffb9ec5018): 0x00000000 Write at address 0x00600018 (0xffffb9ec5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91f77000. Read at address 0x00600018 (0xffff91f77018): 0x00000000 Write at address 0x00600018 (0xffff91f77018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8534a000. Read at address 0x00600018 (0xffff8534a018): 0x00000000 Write at address 0x00600018 (0xffff8534a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff97bc0000. Read at address 0x00600018 (0xffff97bc0018): 0x00000000 Write at address 0x00600018 (0xffff97bc0018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac377000. Read at address 0x00600018 (0xffffac377018): 0x00000000 Write at address 0x00600018 (0xffffac377018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff834c9000. Read at address 0x00600018 (0xffff834c9018): 0x00000000 Write at address 0x00600018 (0xffff834c9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86736000. Read at address 0x00600018 (0xffff86736018): 0x00000000 Write at address 0x00600018 (0xffff86736018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff828d7000. Read at address 0x00600018 (0xffff828d7018): 0x00000000 Write at address 0x00600018 (0xffff828d7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff81316000. Read at address 0x00600018 (0xffff81316018): 0x00000000 Write at address 0x00600018 (0xffff81316018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86b72000. Read at address 0x00600018 (0xffff86b72018): 0x00000000 Write at address 0x00600018 (0xffff86b72018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8ecae000. Read at address 0x00600018 (0xffff8ecae018): 0x00000000 Write at address 0x00600018 (0xffff8ecae018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa2890000. Read at address 0x00600018 (0xffffa2890018): 0x00000000 Write at address 0x00600018 (0xffffa2890018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9a99e000. Read at address 0x00600018 (0xffff9a99e018): 0x00000000 Write at address 0x00600018 (0xffff9a99e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbe8ac000. Read at address 0x00600018 (0xffffbe8ac018): 0x00000000 Write at address 0x00600018 (0xffffbe8ac018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5579000. Read at address 0x00600018 (0xffffa5579018): 0x00000000 Write at address 0x00600018 (0xffffa5579018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa884a000. Read at address 0x00600018 (0xffffa884a018): 0x00000000 Write at address 0x00600018 (0xffffa884a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93164000. Read at address 0x00600018 (0xffff93164018): 0x00000000 Write at address 0x00600018 (0xffff93164018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa973d000. Read at address 0x00600018 (0xffffa973d018): 0x00000000 Write at address 0x00600018 (0xffffa973d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3503000. Read at address 0x00600018 (0xffffb3503018): 0x00000000 Write at address 0x00600018 (0xffffb3503018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9134d000. Read at address 0x00600018 (0xffff9134d018): 0x00000000 Write at address 0x00600018 (0xffff9134d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81171000. Read at address 0x00600018 (0xffff81171018): 0x00000000 Write at address 0x00600018 (0xffff81171018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabd2e000. Read at address 0x00600018 (0xffffabd2e018): 0x00000000 Write at address 0x00600018 (0xffffabd2e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbd9b000. Read at address 0x00600018 (0xffffbbd9b018): 0x00000000 Write at address 0x00600018 (0xffffbbd9b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf17d000. Read at address 0x00600018 (0xffffaf17d018): 0x00000000 Write at address 0x00600018 (0xffffaf17d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbeb7e000. Read at address 0x00600018 (0xffffbeb7e018): 0x00000000 Write at address 0x00600018 (0xffffbeb7e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd283000. Read at address 0x00600018 (0xffffbd283018): 0x00000000 Write at address 0x00600018 (0xffffbd283018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ca21000. Read at address 0x00600018 (0xffff9ca21018): 0x00000000 Write at address 0x00600018 (0xffff9ca21018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa7475000. Read at address 0x00600018 (0xffffa7475018): 0x00000000 Write at address 0x00600018 (0xffffa7475018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92cde000. Read at address 0x00600018 (0xffff92cde018): 0x00000000 Write at address 0x00600018 (0xffff92cde018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbe061000. Read at address 0x00600018 (0xffffbe061018): 0x00000000 Write at address 0x00600018 (0xffffbe061018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ce3f000. Read at address 0x00600018 (0xffff8ce3f018): 0x00000000 Write at address 0x00600018 (0xffff8ce3f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi2:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9fc2000. Read at address 0x00600018 (0xffffb9fc2018): 0x00000000 Write at address 0x00600018 (0xffffb9fc2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91572000. Read at address 0x00600018 (0xffff91572018): 0x00000000 Write at address 0x00600018 (0xffff91572018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb0f3e000. Read at address 0x00600018 (0xffffb0f3e018): 0x00000000 Write at address 0x00600018 (0xffffb0f3e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c875000. Read at address 0x00600018 (0xffff8c875018): 0x00000000 Write at address 0x00600018 (0xffff8c875018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90ffd000. Read at address 0x00600018 (0xffff90ffd018): 0x00000000 Write at address 0x00600018 (0xffff90ffd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffae2dd000. Read at address 0x00600018 (0xffffae2dd018): 0x00000000 Write at address 0x00600018 (0xffffae2dd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84c1d000. Read at address 0x00600018 (0xffff84c1d018): 0x00000000 Write at address 0x00600018 (0xffff84c1d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9be4f000. Read at address 0x00600018 (0xffff9be4f018): 0x00000000 Write at address 0x00600018 (0xffff9be4f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84242000. Read at address 0x00600018 (0xffff84242018): 0x00000000 Write at address 0x00600018 (0xffff84242018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8a7d5000. Read at address 0x00600018 (0xffff8a7d5018): 0x00000000 Write at address 0x00600018 (0xffff8a7d5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff966b0000. Read at address 0x00600018 (0xffff966b0018): 0x00000000 Write at address 0x00600018 (0xffff966b0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85b4f000. Read at address 0x00600018 (0xffff85b4f018): 0x00000000 Write at address 0x00600018 (0xffff85b4f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8886c000. Read at address 0x00600018 (0xffff8886c018): 0x00000000 Write at address 0x00600018 (0xffff8886c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffacdac000. Read at address 0x00600018 (0xffffacdac018): 0x00000000 Write at address 0x00600018 (0xffffacdac018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f409000. Read at address 0x00600018 (0xffff8f409018): 0x00000000 Write at address 0x00600018 (0xffff8f409018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96219000. Read at address 0x00600018 (0xffff96219018): 0x00000000 Write at address 0x00600018 (0xffff96219018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa81e8000. Read at address 0x00600018 (0xffffa81e8018): 0x00000000 Write at address 0x00600018 (0xffffa81e8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83259000. Read at address 0x00600018 (0xffff83259018): 0x00000000 Write at address 0x00600018 (0xffff83259018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98871000. Read at address 0x00600018 (0xffff98871018): 0x00000000 Write at address 0x00600018 (0xffff98871018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9cb30000. Read at address 0x00600018 (0xffff9cb30018): 0x00000000 Write at address 0x00600018 (0xffff9cb30018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9882d000. Read at address 0x00600018 (0xffff9882d018): 0x00000000 Write at address 0x00600018 (0xffff9882d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff90bd8000. Read at address 0x00600018 (0xffff90bd8018): 0x00000000 Write at address 0x00600018 (0xffff90bd8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffafeda000. Read at address 0x00600018 (0xffffafeda018): 0x00000000 Write at address 0x00600018 (0xffffafeda018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87aec000. Read at address 0x00600018 (0xffff87aec018): 0x00000000 Write at address 0x00600018 (0xffff87aec018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff88959000. Read at address 0x00600018 (0xffff88959018): 0x00000000 Write at address 0x00600018 (0xffff88959018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb2264000. Read at address 0x00600018 (0xffffb2264018): 0x00000000 Write at address 0x00600018 (0xffffb2264018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85a69000. Read at address 0x00600018 (0xffff85a69018): 0x00000000 Write at address 0x00600018 (0xffff85a69018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9f723000. Read at address 0x00600018 (0xffff9f723018): 0x00000000 Write at address 0x00600018 (0xffff9f723018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff973b4000. Read at address 0x00600018 (0xffff973b4018): 0x00000000 Write at address 0x00600018 (0xffff973b4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff848a1000. Read at address 0x00600018 (0xffff848a1018): 0x00000000 Write at address 0x00600018 (0xffff848a1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffacc4b000. Read at address 0x00600018 (0xffffacc4b018): 0x00000000 Write at address 0x00600018 (0xffffacc4b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c126000. Read at address 0x00600018 (0xffff8c126018): 0x00000000 Write at address 0x00600018 (0xffff8c126018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa9e9000. Read at address 0x00600018 (0xffffaa9e9018): 0x00000000 Write at address 0x00600018 (0xffffaa9e9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90b01000. Read at address 0x00600018 (0xffff90b01018): 0x00000000 Write at address 0x00600018 (0xffff90b01018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaf5aa000. Read at address 0x00600018 (0xffffaf5aa018): 0x00000000 Write at address 0x00600018 (0xffffaf5aa018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe066000. Read at address 0x00600018 (0xffffbe066018): 0x00000000 Write at address 0x00600018 (0xffffbe066018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8b053000. Read at address 0x00600018 (0xffff8b053018): 0x00000000 Write at address 0x00600018 (0xffff8b053018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89b20000. Read at address 0x00600018 (0xffff89b20018): 0x00000000 Write at address 0x00600018 (0xffff89b20018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9582b000. Read at address 0x00600018 (0xffff9582b018): 0x00000000 Write at address 0x00600018 (0xffff9582b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb0031000. Read at address 0x00600018 (0xffffb0031018): 0x00000000 Write at address 0x00600018 (0xffffb0031018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa28b1000. Read at address 0x00600018 (0xffffa28b1018): 0x00000000 Write at address 0x00600018 (0xffffa28b1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83b3c000. Read at address 0x00600018 (0xffff83b3c018): 0x00000000 Write at address 0x00600018 (0xffff83b3c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84470000. Read at address 0x00600018 (0xffff84470018): 0x00000000 Write at address 0x00600018 (0xffff84470018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa92ba000. Read at address 0x00600018 (0xffffa92ba018): 0x00000000 Write at address 0x00600018 (0xffffa92ba018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8b537000. Read at address 0x00600018 (0xffff8b537018): 0x00000000 Write at address 0x00600018 (0xffff8b537018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a759000. Read at address 0x00600018 (0xffff8a759018): 0x00000000 Write at address 0x00600018 (0xffff8a759018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa30c3000. Read at address 0x00600018 (0xffffa30c3018): 0x00000000 Write at address 0x00600018 (0xffffa30c3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87308000. Read at address 0x00600018 (0xffff87308018): 0x00000000 Write at address 0x00600018 (0xffff87308018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9ec33000. Read at address 0x00600018 (0xffff9ec33018): 0x00000000 Write at address 0x00600018 (0xffff9ec33018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff86350000. Read at address 0x00600018 (0xffff86350018): 0x00000000 Write at address 0x00600018 (0xffff86350018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c0e9000. Read at address 0x00600018 (0xffff8c0e9018): 0x00000000 Write at address 0x00600018 (0xffff8c0e9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a221000. Read at address 0x00600018 (0xffff8a221018): 0x00000000 Write at address 0x00600018 (0xffff8a221018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa392d000. Read at address 0x00600018 (0xffffa392d018): 0x00000000 Write at address 0x00600018 (0xffffa392d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f691000. Read at address 0x00600018 (0xffff9f691018): 0x00000000 Write at address 0x00600018 (0xffff9f691018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadf74000. Read at address 0x00600018 (0xffffadf74018): 0x00000000 Write at address 0x00600018 (0xffffadf74018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab3ae000. Read at address 0x00600018 (0xffffab3ae018): 0x00000000 Write at address 0x00600018 (0xffffab3ae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9cc8000. Read at address 0x00600018 (0xffffb9cc8018): 0x00000000 Write at address 0x00600018 (0xffffb9cc8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb6368000. Read at address 0x00600018 (0xffffb6368018): 0x00000000 Write at address 0x00600018 (0xffffb6368018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1714000. Read at address 0x00600018 (0xffffb1714018): 0x00000000 Write at address 0x00600018 (0xffffb1714018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8bf6e000. Read at address 0x00600018 (0xffff8bf6e018): 0x00000000 Write at address 0x00600018 (0xffff8bf6e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8a093000. Read at address 0x00600018 (0xffff8a093018): 0x00000000 Write at address 0x00600018 (0xffff8a093018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80354000. Read at address 0x00600018 (0xffff80354018): 0x00000000 Write at address 0x00600018 (0xffff80354018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffac5e8000. Read at address 0x00600018 (0xffffac5e8018): 0x00000000 Write at address 0x00600018 (0xffffac5e8018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi0:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff83b38000. Read at address 0x00600018 (0xffff83b38018): 0x00000000 Write at address 0x00600018 (0xffff83b38018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa75a4000. Read at address 0x00600018 (0xffffa75a4018): 0x00000000 Write at address 0x00600018 (0xffffa75a4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa755f000. Read at address 0x00600018 (0xffffa755f018): 0x00000000 Write at address 0x00600018 (0xffffa755f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fef5000. Read at address 0x00600018 (0xffff7fef5018): 0x00000000 Write at address 0x00600018 (0xffff7fef5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae85e000. Read at address 0x00600018 (0xffffae85e018): 0x00000000 Write at address 0x00600018 (0xffffae85e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb9a31000. Read at address 0x00600018 (0xffffb9a31018): 0x00000000 Write at address 0x00600018 (0xffffb9a31018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff841a1000. Read at address 0x00600018 (0xffff841a1018): 0x00000000 Write at address 0x00600018 (0xffff841a1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffab6e2000. Read at address 0x00600018 (0xffffab6e2018): 0x00000000 Write at address 0x00600018 (0xffffab6e2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 237 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff90da2000. Read at address 0x00600018 (0xffff90da2018): 0x00000000 Write at address 0x00600018 (0xffff90da2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8235d000. Read at address 0x00600018 (0xffff8235d018): 0x00000000 Write at address 0x00600018 (0xffff8235d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 237 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa99d9000. Read at address 0x00600018 (0xffffa99d9018): 0x00000000 Write at address 0x00600018 (0xffffa99d9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbaf65000. Read at address 0x00600018 (0xffffbaf65018): 0x00000000 Write at address 0x00600018 (0xffffbaf65018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf04d000. Read at address 0x00600018 (0xffffaf04d018): 0x00000000 Write at address 0x00600018 (0xffffaf04d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaa228000. Read at address 0x00600018 (0xffffaa228018): 0x00000000 Write at address 0x00600018 (0xffffaa228018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Memory mapped at address 0xffff9fcb7000. Read at address 0x00600018 (0xffff9fcb7018): 0x00000000 Write at address 0x00600018 (0xffff9fcb7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb8eb2000. Read at address 0x00600018 (0xffffb8eb2018): 0x00000000 Write at address 0x00600018 (0xffffb8eb2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa464c000. Read at address 0x00600018 (0xffffa464c018): 0x00000000 Write at address 0x00600018 (0xffffa464c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff834f8000. Read at address 0x00600018 (0xffff834f8018): 0x00000000 Write at address 0x00600018 (0xffff834f8018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9483000. Read at address 0x00600018 (0xffffa9483018): 0x00000000 Write at address 0x00600018 (0xffffa9483018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbe9a000. Read at address 0x00600018 (0xffffbbe9a018): 0x00000000 Write at address 0x00600018 (0xffffbbe9a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3b3b000. Read at address 0x00600018 (0xffffa3b3b018): 0x00000000 Write at address 0x00600018 (0xffffa3b3b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96412000. Read at address 0x00600018 (0xffff96412018): 0x00000000 Write at address 0x00600018 (0xffff96412018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffacdc8000. Read at address 0x00600018 (0xffffacdc8018): 0x00000000 Write at address 0x00600018 (0xffffacdc8018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad16c000. Read at address 0x00600018 (0xffffad16c018): 0x00000000 Write at address 0x00600018 (0xffffad16c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d238000. Read at address 0x00600018 (0xffff8d238018): 0x00000000 Write at address 0x00600018 (0xffff8d238018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8aa5000. Read at address 0x00600018 (0xffffa8aa5018): 0x00000000 Write at address 0x00600018 (0xffffa8aa5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8d361000. Read at address 0x00600018 (0xffff8d361018): 0x00000000 Write at address 0x00600018 (0xffff8d361018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b10e000. Read at address 0x00600018 (0xffff9b10e018): 0x00000000 Write at address 0x00600018 (0xffff9b10e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9aa2b000. Read at address 0x00600018 (0xffff9aa2b018): 0x00000000 Write at address 0x00600018 (0xffff9aa2b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbb06d000. Read at address 0x00600018 (0xffffbb06d018): 0x00000000 Write at address 0x00600018 (0xffffbb06d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi1:dml_code is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff994ac000. Read at address 0x00600018 (0xffff994ac018): 0x00000000 Write at address 0x00600018 (0xffff994ac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b866000. Read at address 0x00600018 (0xffff9b866018): 0x00000000 Write at address 0x00600018 (0xffff9b866018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5190000. Read at address 0x00600018 (0xffffb5190018): 0x00000000 Write at address 0x00600018 (0xffffb5190018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8299d000. Read at address 0x00600018 (0xffff8299d018): 0x00000000 Write at address 0x00600018 (0xffff8299d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9fb4d000. Read at address 0x00600018 (0xffff9fb4d018): 0x00000000 Write at address 0x00600018 (0xffff9fb4d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8dfc6000. Read at address 0x00600018 (0xffff8dfc6018): 0x00000000 Write at address 0x00600018 (0xffff8dfc6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa58af000. Read at address 0x00600018 (0xffffa58af018): 0x00000000 Write at address 0x00600018 (0xffffa58af018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91510000. Read at address 0x00600018 (0xffff91510018): 0x00000000 Write at address 0x00600018 (0xffff91510018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb305000. Read at address 0x00600018 (0xffffbb305018): 0x00000000 Write at address 0x00600018 (0xffffbb305018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbdfdb000. Read at address 0x00600018 (0xffffbdfdb018): 0x00000000 Write at address 0x00600018 (0xffffbdfdb018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9135a000. Read at address 0x00600018 (0xffff9135a018): 0x00000000 Write at address 0x00600018 (0xffff9135a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafc7b000. Read at address 0x00600018 (0xffffafc7b018): 0x00000000 Write at address 0x00600018 (0xffffafc7b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi1:dml_code is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bda2000. Read at address 0x00600018 (0xffff9bda2018): 0x00000000 Write at address 0x00600018 (0xffff9bda2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa207d000. Read at address 0x00600018 (0xffffa207d018): 0x00000000 Write at address 0x00600018 (0xffffa207d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9aadd000. Read at address 0x00600018 (0xffff9aadd018): 0x00000000 Write at address 0x00600018 (0xffff9aadd018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5615000. Read at address 0x00600018 (0xffffb5615018): 0x00000000 Write at address 0x00600018 (0xffffb5615018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff92982000. Read at address 0x00600018 (0xffff92982018): 0x00000000 Write at address 0x00600018 (0xffff92982018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9df2c000. Read at address 0x00600018 (0xffff9df2c018): 0x00000000 Write at address 0x00600018 (0xffff9df2c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83b0f000. Read at address 0x00600018 (0xffff83b0f018): 0x00000000 Write at address 0x00600018 (0xffff83b0f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82540000. Read at address 0x00600018 (0xffff82540018): 0x00000000 Write at address 0x00600018 (0xffff82540018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb16c7000. Read at address 0x00600018 (0xffffb16c7018): 0x00000000 Write at address 0x00600018 (0xffffb16c7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9c8f9000. Read at address 0x00600018 (0xffff9c8f9018): 0x00000000 Write at address 0x00600018 (0xffff9c8f9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96f1c000. Read at address 0x00600018 (0xffff96f1c018): 0x00000000 Write at address 0x00600018 (0xffff96f1c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff97158000. Read at address 0x00600018 (0xffff97158018): 0x00000000 Write at address 0x00600018 (0xffff97158018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8e369000. Read at address 0x00600018 (0xffff8e369018): 0x00000000 Write at address 0x00600018 (0xffff8e369018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbec7d000. Read at address 0x00600018 (0xffffbec7d018): 0x00000000 Write at address 0x00600018 (0xffffbec7d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d9e5000. Read at address 0x00600018 (0xffff9d9e5018): 0x00000000 Write at address 0x00600018 (0xffff9d9e5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb90e0000. Read at address 0x00600018 (0xffffb90e0018): 0x00000000 Write at address 0x00600018 (0xffffb90e0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa2aae000. Read at address 0x00600018 (0xffffa2aae018): 0x00000000 Write at address 0x00600018 (0xffffa2aae018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa36c4000. Read at address 0x00600018 (0xffffa36c4018): 0x00000000 Write at address 0x00600018 (0xffffa36c4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0d35000. Read at address 0x00600018 (0xffffb0d35018): 0x00000000 Write at address 0x00600018 (0xffffb0d35018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa233f000. Read at address 0x00600018 (0xffffa233f018): 0x00000000 Write at address 0x00600018 (0xffffa233f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f327000. Read at address 0x00600018 (0xffff8f327018): 0x00000000 Write at address 0x00600018 (0xffff8f327018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8d4a9000. Read at address 0x00600018 (0xffff8d4a9018): 0x00000000 Write at address 0x00600018 (0xffff8d4a9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb7710000. Read at address 0x00600018 (0xffffb7710018): 0x00000000 Write at address 0x00600018 (0xffffb7710018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8516a000. Read at address 0x00600018 (0xffff8516a018): 0x00000000 Write at address 0x00600018 (0xffff8516a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb48cb000. Read at address 0x00600018 (0xffffb48cb018): 0x00000000 Write at address 0x00600018 (0xffffb48cb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9459f000. Read at address 0x00600018 (0xffff9459f018): 0x00000000 Write at address 0x00600018 (0xffff9459f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa808c000. Read at address 0x00600018 (0xffffa808c018): 0x00000000 Write at address 0x00600018 (0xffffa808c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ce84000. Read at address 0x00600018 (0xffff8ce84018): 0x00000000 Write at address 0x00600018 (0xffff8ce84018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff80414000. Read at address 0x00600018 (0xffff80414018): 0x00000000 Write at address 0x00600018 (0xffff80414018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3021000. Read at address 0x00600018 (0xffffa3021018): 0x00000000 Write at address 0x00600018 (0xffffa3021018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9a50f000. Read at address 0x00600018 (0xffff9a50f018): 0x00000000 Write at address 0x00600018 (0xffff9a50f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6a7f000. Read at address 0x00600018 (0xffffa6a7f018): 0x00000000 Write at address 0x00600018 (0xffffa6a7f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a9b3000. Read at address 0x00600018 (0xffff8a9b3018): 0x00000000 Write at address 0x00600018 (0xffff8a9b3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5cfd000. Read at address 0x00600018 (0xffffa5cfd018): 0x00000000 Write at address 0x00600018 (0xffffa5cfd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb69bf000. Read at address 0x00600018 (0xffffb69bf018): 0x00000000 Write at address 0x00600018 (0xffffb69bf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97643000. Read at address 0x00600018 (0xffff97643018): 0x00000000 Write at address 0x00600018 (0xffff97643018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8820d000. Read at address 0x00600018 (0xffff8820d018): 0x00000000 Write at address 0x00600018 (0xffff8820d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 235 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9ba75000. Read at address 0x00600018 (0xffff9ba75018): 0x00000000 Write at address 0x00600018 (0xffff9ba75018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa9936000. Read at address 0x00600018 (0xffffa9936018): 0x00000000 Write at address 0x00600018 (0xffffa9936018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff98064000. Read at address 0x00600018 (0xffff98064018): 0x00000000 Write at address 0x00600018 (0xffff98064018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff95a01000. Read at address 0x00600018 (0xffff95a01018): 0x00000000 Write at address 0x00600018 (0xffff95a01018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff87de6000. Read at address 0x00600018 (0xffff87de6018): 0x00000000 Write at address 0x00600018 (0xffff87de6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa5f1000. Read at address 0x00600018 (0xffffaa5f1018): 0x00000000 Write at address 0x00600018 (0xffffaa5f1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1770000. Read at address 0x00600018 (0xffffa1770018): 0x00000000 Write at address 0x00600018 (0xffffa1770018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9dc5000. Read at address 0x00600018 (0xffffa9dc5018): 0x00000000 Write at address 0x00600018 (0xffffa9dc5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b38c000. Read at address 0x00600018 (0xffff9b38c018): 0x00000000 Write at address 0x00600018 (0xffff9b38c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9dbd2000. Read at address 0x00600018 (0xffff9dbd2018): 0x00000000 Write at address 0x00600018 (0xffff9dbd2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8532a000. Read at address 0x00600018 (0xffff8532a018): 0x00000000 Write at address 0x00600018 (0xffff8532a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92762000. Read at address 0x00600018 (0xffff92762018): 0x00000000 Write at address 0x00600018 (0xffff92762018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb8b93000. Read at address 0x00600018 (0xffffb8b93018): 0x00000000 Write at address 0x00600018 (0xffffb8b93018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2835000. Read at address 0x00600018 (0xffffb2835018): 0x00000000 Write at address 0x00600018 (0xffffb2835018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa026c000. Read at address 0x00600018 (0xffffa026c018): 0x00000000 Write at address 0x00600018 (0xffffa026c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa4278000. Read at address 0x00600018 (0xffffa4278018): 0x00000000 Write at address 0x00600018 (0xffffa4278018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb8850000. Read at address 0x00600018 (0xffffb8850018): 0x00000000 Write at address 0x00600018 (0xffffb8850018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa163000. Read at address 0x00600018 (0xffffaa163018): 0x00000000 Write at address 0x00600018 (0xffffaa163018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffab35d000. Read at address 0x00600018 (0xffffab35d018): 0x00000000 Write at address 0x00600018 (0xffffab35d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9779c000. Read at address 0x00600018 (0xffff9779c018): 0x00000000 Write at address 0x00600018 (0xffff9779c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff96043000. Read at address 0x00600018 (0xffff96043018): 0x00000000 Write at address 0x00600018 (0xffff96043018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa402a000. Read at address 0x00600018 (0xffffa402a018): 0x00000000 Write at address 0x00600018 (0xffffa402a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa436b000. Read at address 0x00600018 (0xffffa436b018): 0x00000000 Write at address 0x00600018 (0xffffa436b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf5b8000. Read at address 0x00600018 (0xffffbf5b8018): 0x00000000 Write at address 0x00600018 (0xffffbf5b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9d413000. Read at address 0x00600018 (0xffff9d413018): 0x00000000 Write at address 0x00600018 (0xffff9d413018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7d7c000. Read at address 0x00600018 (0xffffb7d7c018): 0x00000000 Write at address 0x00600018 (0xffffb7d7c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb95ca000. Read at address 0x00600018 (0xffffb95ca018): 0x00000000 Write at address 0x00600018 (0xffffb95ca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa409000. Read at address 0x00600018 (0xffffaa409018): 0x00000000 Write at address 0x00600018 (0xffffaa409018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa45e2000. Read at address 0x00600018 (0xffffa45e2018): 0x00000000 Write at address 0x00600018 (0xffffa45e2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1412000. Read at address 0x00600018 (0xffffa1412018): 0x00000000 Write at address 0x00600018 (0xffffa1412018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff94251000. Read at address 0x00600018 (0xffff94251018): 0x00000000 Write at address 0x00600018 (0xffff94251018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadc92000. Read at address 0x00600018 (0xffffadc92018): 0x00000000 Write at address 0x00600018 (0xffffadc92018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a0ba000. Read at address 0x00600018 (0xffff9a0ba018): 0x00000000 Write at address 0x00600018 (0xffff9a0ba018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa6bf0000. Read at address 0x00600018 (0xffffa6bf0018): 0x00000000 Write at address 0x00600018 (0xffffa6bf0018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9443f000. Read at address 0x00600018 (0xffff9443f018): 0x00000000 Write at address 0x00600018 (0xffff9443f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa57d0000. Read at address 0x00600018 (0xffffa57d0018): 0x00000000 Write at address 0x00600018 (0xffffa57d0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa069f000. Read at address 0x00600018 (0xffffa069f018): 0x00000000 Write at address 0x00600018 (0xffffa069f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffad45d000. Read at address 0x00600018 (0xffffad45d018): 0x00000000 Write at address 0x00600018 (0xffffad45d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9fa14000. Read at address 0x00600018 (0xffff9fa14018): 0x00000000 Write at address 0x00600018 (0xffff9fa14018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb8472000. Read at address 0x00600018 (0xffffb8472018): 0x00000000 Write at address 0x00600018 (0xffffb8472018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa69dc000. Read at address 0x00600018 (0xffffa69dc018): 0x00000000 Write at address 0x00600018 (0xffffa69dc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9c6a000. Read at address 0x00600018 (0xffffb9c6a018): 0x00000000 Write at address 0x00600018 (0xffffb9c6a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4579000. Read at address 0x00600018 (0xffffa4579018): 0x00000000 Write at address 0x00600018 (0xffffa4579018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97a11000. Read at address 0x00600018 (0xffff97a11018): 0x00000000 Write at address 0x00600018 (0xffff97a11018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff7f89a000. Read at address 0x00600018 (0xffff7f89a018): 0x00000000 Write at address 0x00600018 (0xffff7f89a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae126000. Read at address 0x00600018 (0xffffae126018): 0x00000000 Write at address 0x00600018 (0xffffae126018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86288000. Read at address 0x00600018 (0xffff86288018): 0x00000000 Write at address 0x00600018 (0xffff86288018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c960000. Read at address 0x00600018 (0xffff9c960018): 0x00000000 Write at address 0x00600018 (0xffff9c960018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab756000. Read at address 0x00600018 (0xffffab756018): 0x00000000 Write at address 0x00600018 (0xffffab756018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff83afc000. Read at address 0x00600018 (0xffff83afc018): 0x00000000 Write at address 0x00600018 (0xffff83afc018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa1f32000. Read at address 0x00600018 (0xffffa1f32018): 0x00000000 Write at address 0x00600018 (0xffffa1f32018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9ed01000. Read at address 0x00600018 (0xffff9ed01018): 0x00000000 Write at address 0x00600018 (0xffff9ed01018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8da50000. Read at address 0x00600018 (0xffff8da50018): 0x00000000 Write at address 0x00600018 (0xffff8da50018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c647000. Read at address 0x00600018 (0xffff9c647018): 0x00000000 Write at address 0x00600018 (0xffff9c647018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff98763000. Read at address 0x00600018 (0xffff98763018): 0x00000000 Write at address 0x00600018 (0xffff98763018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaafdb000. Read at address 0x00600018 (0xffffaafdb018): 0x00000000 Write at address 0x00600018 (0xffffaafdb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87d69000. Read at address 0x00600018 (0xffff87d69018): 0x00000000 Write at address 0x00600018 (0xffff87d69018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9deec000. Read at address 0x00600018 (0xffff9deec018): 0x00000000 Write at address 0x00600018 (0xffff9deec018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9d405000. Read at address 0x00600018 (0xffff9d405018): 0x00000000 Write at address 0x00600018 (0xffff9d405018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3414000. Read at address 0x00600018 (0xffffb3414018): 0x00000000 Write at address 0x00600018 (0xffffb3414018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8fb0f000. Read at address 0x00600018 (0xffff8fb0f018): 0x00000000 Write at address 0x00600018 (0xffff8fb0f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8386000. Read at address 0x00600018 (0xffffb8386018): 0x00000000 Write at address 0x00600018 (0xffffb8386018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbb08f000. Read at address 0x00600018 (0xffffbb08f018): 0x00000000 Write at address 0x00600018 (0xffffbb08f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff80a39000. Read at address 0x00600018 (0xffff80a39018): 0x00000000 Write at address 0x00600018 (0xffff80a39018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa4d41000. Read at address 0x00600018 (0xffffa4d41018): 0x00000000 Write at address 0x00600018 (0xffffa4d41018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8b636000. Read at address 0x00600018 (0xffff8b636018): 0x00000000 Write at address 0x00600018 (0xffff8b636018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb8beb000. Read at address 0x00600018 (0xffffb8beb018): 0x00000000 Write at address 0x00600018 (0xffffb8beb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa805d000. Read at address 0x00600018 (0xffffa805d018): 0x00000000 Write at address 0x00600018 (0xffffa805d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff92692000. Read at address 0x00600018 (0xffff92692018): 0x00000000 Write at address 0x00600018 (0xffff92692018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba496000. Read at address 0x00600018 (0xffffba496018): 0x00000000 Write at address 0x00600018 (0xffffba496018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a492000. Read at address 0x00600018 (0xffff9a492018): 0x00000000 Write at address 0x00600018 (0xffff9a492018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb2981000. Read at address 0x00600018 (0xffffb2981018): 0x00000000 Write at address 0x00600018 (0xffffb2981018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8df4e000. Read at address 0x00600018 (0xffff8df4e018): 0x00000000 Write at address 0x00600018 (0xffff8df4e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbcd84000. Read at address 0x00600018 (0xffffbcd84018): 0x00000000 Write at address 0x00600018 (0xffffbcd84018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbc07d000. Read at address 0x00600018 (0xffffbc07d018): 0x00000000 Write at address 0x00600018 (0xffffbc07d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bcbf000. Read at address 0x00600018 (0xffff9bcbf018): 0x00000000 Write at address 0x00600018 (0xffff9bcbf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff80ece000. Read at address 0x00600018 (0xffff80ece018): 0x00000000 Write at address 0x00600018 (0xffff80ece018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff887c8000. Read at address 0x00600018 (0xffff887c8018): 0x00000000 Write at address 0x00600018 (0xffff887c8018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb469e000. Read at address 0x00600018 (0xffffb469e018): 0x00000000 Write at address 0x00600018 (0xffffb469e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff82faf000. Read at address 0x00600018 (0xffff82faf018): 0x00000000 Write at address 0x00600018 (0xffff82faf018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff91ec0000. Read at address 0x00600018 (0xffff91ec0018): 0x00000000 Write at address 0x00600018 (0xffff91ec0018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a358000. Read at address 0x00600018 (0xffff9a358018): 0x00000000 Write at address 0x00600018 (0xffff9a358018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98bd0000. Read at address 0x00600018 (0xffff98bd0018): 0x00000000 Write at address 0x00600018 (0xffff98bd0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff870ef000. Read at address 0x00600018 (0xffff870ef018): 0x00000000 Write at address 0x00600018 (0xffff870ef018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85173000. Read at address 0x00600018 (0xffff85173018): 0x00000000 Write at address 0x00600018 (0xffff85173018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7274000. Read at address 0x00600018 (0xffffb7274018): 0x00000000 Write at address 0x00600018 (0xffffb7274018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa2ab3000. Read at address 0x00600018 (0xffffa2ab3018): 0x00000000 Write at address 0x00600018 (0xffffa2ab3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6f94000. Read at address 0x00600018 (0xffffb6f94018): 0x00000000 Write at address 0x00600018 (0xffffb6f94018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff85f76000. Read at address 0x00600018 (0xffff85f76018): 0x00000000 Write at address 0x00600018 (0xffff85f76018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd846000. Read at address 0x00600018 (0xffffbd846018): 0x00000000 Write at address 0x00600018 (0xffffbd846018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b290000. Read at address 0x00600018 (0xffff9b290018): 0x00000000 Write at address 0x00600018 (0xffff9b290018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaef16000. Read at address 0x00600018 (0xffffaef16018): 0x00000000 Write at address 0x00600018 (0xffffaef16018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb22bd000. Read at address 0x00600018 (0xffffb22bd018): 0x00000000 Write at address 0x00600018 (0xffffb22bd018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa306d000. Read at address 0x00600018 (0xffffa306d018): 0x00000000 Write at address 0x00600018 (0xffffa306d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa3a60000. Read at address 0x00600018 (0xffffa3a60018): 0x00000000 Write at address 0x00600018 (0xffffa3a60018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2435000. Read at address 0x00600018 (0xffffa2435018): 0x00000000 Write at address 0x00600018 (0xffffa2435018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97e42000. Read at address 0x00600018 (0xffff97e42018): 0x00000000 Write at address 0x00600018 (0xffff97e42018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85159000. Read at address 0x00600018 (0xffff85159018): 0x00000000 Write at address 0x00600018 (0xffff85159018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb7c06000. Read at address 0x00600018 (0xffffb7c06018): 0x00000000 Write at address 0x00600018 (0xffffb7c06018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac97a000. Read at address 0x00600018 (0xffffac97a018): 0x00000000 Write at address 0x00600018 (0xffffac97a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95737000. Read at address 0x00600018 (0xffff95737018): 0x00000000 Write at address 0x00600018 (0xffff95737018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb79c6000. Read at address 0x00600018 (0xffffb79c6018): 0x00000000 Write at address 0x00600018 (0xffffb79c6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadf47000. Read at address 0x00600018 (0xffffadf47018): 0x00000000 Write at address 0x00600018 (0xffffadf47018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff95c40000. Read at address 0x00600018 (0xffff95c40018): 0x00000000 Write at address 0x00600018 (0xffff95c40018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7f0c000. Read at address 0x00600018 (0xffffb7f0c018): 0x00000000 Write at address 0x00600018 (0xffffb7f0c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. ubi1:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7f9b0000. Read at address 0x00600018 (0xffff7f9b0018): 0x00000000 Write at address 0x00600018 (0xffff7f9b0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb9825000. Read at address 0x00600018 (0xffffb9825018): 0x00000000 Write at address 0x00600018 (0xffffb9825018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba5ca000. Read at address 0x00600018 (0xffffba5ca018): 0x00000000 Write at address 0x00600018 (0xffffba5ca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8dde0000. Read at address 0x00600018 (0xffff8dde0018): 0x00000000 Write at address 0x00600018 (0xffff8dde0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3ced000. Read at address 0x00600018 (0xffffb3ced018): 0x00000000 Write at address 0x00600018 (0xffffb3ced018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9652e000. Read at address 0x00600018 (0xffff9652e018): 0x00000000 Write at address 0x00600018 (0xffff9652e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8bd0a000. Read at address 0x00600018 (0xffff8bd0a018): 0x00000000 Write at address 0x00600018 (0xffff8bd0a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a75b000. Read at address 0x00600018 (0xffff9a75b018): 0x00000000 Write at address 0x00600018 (0xffff9a75b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa2513000. Read at address 0x00600018 (0xffffa2513018): 0x00000000 Write at address 0x00600018 (0xffffa2513018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb8fb6000. Read at address 0x00600018 (0xffffb8fb6018): 0x00000000 Write at address 0x00600018 (0xffffb8fb6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91814000. Read at address 0x00600018 (0xffff91814018): 0x00000000 Write at address 0x00600018 (0xffff91814018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa2728000. Read at address 0x00600018 (0xffffa2728018): 0x00000000 Write at address 0x00600018 (0xffffa2728018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83298000. Read at address 0x00600018 (0xffff83298018): 0x00000000 Write at address 0x00600018 (0xffff83298018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5f31000. Read at address 0x00600018 (0xffffa5f31018): 0x00000000 Write at address 0x00600018 (0xffffa5f31018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa75ac000. Read at address 0x00600018 (0xffffa75ac018): 0x00000000 Write at address 0x00600018 (0xffffa75ac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi0:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa0033000. Read at address 0x00600018 (0xffffa0033018): 0x00000000 Write at address 0x00600018 (0xffffa0033018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4650000. Read at address 0x00600018 (0xffffb4650018): 0x00000000 Write at address 0x00600018 (0xffffb4650018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c1b5000. Read at address 0x00600018 (0xffff8c1b5018): 0x00000000 Write at address 0x00600018 (0xffff8c1b5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9285b000. Read at address 0x00600018 (0xffff9285b018): 0x00000000 Write at address 0x00600018 (0xffff9285b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5cf4000. Read at address 0x00600018 (0xffffa5cf4018): 0x00000000 Write at address 0x00600018 (0xffffa5cf4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff81021000. Read at address 0x00600018 (0xffff81021018): 0x00000000 Write at address 0x00600018 (0xffff81021018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 net.ipv6.conf.eth0.dad_transmits = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb69ce000. Read at address 0x00600018 (0xffffb69ce018): 0x00000000 Write at address 0x00600018 (0xffffb69ce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9764e000. Read at address 0x00600018 (0xffff9764e018): 0x00000000 Write at address 0x00600018 (0xffff9764e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbda2a000. Read at address 0x00600018 (0xffffbda2a018): 0x00000000 Write at address 0x00600018 (0xffffbda2a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbbe73000. Read at address 0x00600018 (0xffffbbe73018): 0x00000000 Write at address 0x00600018 (0xffffbbe73018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2162000. Read at address 0x00600018 (0xffffb2162018): 0x00000000 Write at address 0x00600018 (0xffffb2162018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5f9e000. Read at address 0x00600018 (0xffffa5f9e018): 0x00000000 Write at address 0x00600018 (0xffffa5f9e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffae693000. Read at address 0x00600018 (0xffffae693018): 0x00000000 Write at address 0x00600018 (0xffffae693018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 237 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffac9c6000. Read at address 0x00600018 (0xffffac9c6018): 0x00000000 Write at address 0x00600018 (0xffffac9c6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa9aba000. Read at address 0x00600018 (0xffffa9aba018): 0x00000000 Write at address 0x00600018 (0xffffa9aba018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff94d03000. Read at address 0x00600018 (0xffff94d03018): 0x00000000 Write at address 0x00600018 (0xffff94d03018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb377e000. Read at address 0x00600018 (0xffffb377e018): 0x00000000 Write at address 0x00600018 (0xffffb377e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff96e13000. Read at address 0x00600018 (0xffff96e13018): 0x00000000 Write at address 0x00600018 (0xffff96e13018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaee03000. Read at address 0x00600018 (0xffffaee03018): 0x00000000 Write at address 0x00600018 (0xffffaee03018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad1ae000. Read at address 0x00600018 (0xffffad1ae018): 0x00000000 Write at address 0x00600018 (0xffffad1ae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb224b000. Read at address 0x00600018 (0xffffb224b018): 0x00000000 Write at address 0x00600018 (0xffffb224b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c1ec000. Read at address 0x00600018 (0xffff9c1ec018): 0x00000000 Write at address 0x00600018 (0xffff9c1ec018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffafda6000. Read at address 0x00600018 (0xffffafda6018): 0x00000000 Write at address 0x00600018 (0xffffafda6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6fb8000. Read at address 0x00600018 (0xffffa6fb8018): 0x00000000 Write at address 0x00600018 (0xffffa6fb8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb536c000. Read at address 0x00600018 (0xffffb536c018): 0x00000000 Write at address 0x00600018 (0xffffb536c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8ee40000. Read at address 0x00600018 (0xffff8ee40018): 0x00000000 Write at address 0x00600018 (0xffff8ee40018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa2f80000. Read at address 0x00600018 (0xffffa2f80018): 0x00000000 Write at address 0x00600018 (0xffffa2f80018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9a9fd000. Read at address 0x00600018 (0xffff9a9fd018): 0x00000000 Write at address 0x00600018 (0xffff9a9fd018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87811000. Read at address 0x00600018 (0xffff87811018): 0x00000000 Write at address 0x00600018 (0xffff87811018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85dc7000. Read at address 0x00600018 (0xffff85dc7018): 0x00000000 Write at address 0x00600018 (0xffff85dc7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9fd7000. Read at address 0x00600018 (0xffffa9fd7018): 0x00000000 Write at address 0x00600018 (0xffffa9fd7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9595d000. Read at address 0x00600018 (0xffff9595d018): 0x00000000 Write at address 0x00600018 (0xffff9595d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff84c1e000. Read at address 0x00600018 (0xffff84c1e018): 0x00000000 Write at address 0x00600018 (0xffff84c1e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaadae000. Read at address 0x00600018 (0xffffaadae018): 0x00000000 Write at address 0x00600018 (0xffffaadae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cc6e000. Read at address 0x00600018 (0xffff9cc6e018): 0x00000000 Write at address 0x00600018 (0xffff9cc6e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9e338000. Read at address 0x00600018 (0xffff9e338018): 0x00000000 Write at address 0x00600018 (0xffff9e338018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93e83000. Read at address 0x00600018 (0xffff93e83018): 0x00000000 Write at address 0x00600018 (0xffff93e83018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab697000. Read at address 0x00600018 (0xffffab697018): 0x00000000 Write at address 0x00600018 (0xffffab697018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff988c5000. Read at address 0x00600018 (0xffff988c5018): 0x00000000 Write at address 0x00600018 (0xffff988c5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa393c000. Read at address 0x00600018 (0xffffa393c018): 0x00000000 Write at address 0x00600018 (0xffffa393c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi1:animations is mounted. ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf501000. Read at address 0x00600018 (0xffffaf501018): 0x00000000 Write at address 0x00600018 (0xffffaf501018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae09f000. Read at address 0x00600018 (0xffffae09f018): 0x00000000 Write at address 0x00600018 (0xffffae09f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb85f4000. Read at address 0x00600018 (0xffffb85f4018): 0x00000000 Write at address 0x00600018 (0xffffb85f4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8260b000. Read at address 0x00600018 (0xffff8260b018): 0x00000000 Write at address 0x00600018 (0xffff8260b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97350000. Read at address 0x00600018 (0xffff97350018): 0x00000000 Write at address 0x00600018 (0xffff97350018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8683c000. Read at address 0x00600018 (0xffff8683c018): 0x00000000 Write at address 0x00600018 (0xffff8683c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0a5a000. Read at address 0x00600018 (0xffffb0a5a018): 0x00000000 Write at address 0x00600018 (0xffffb0a5a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9f04000. Read at address 0x00600018 (0xffffb9f04018): 0x00000000 Write at address 0x00600018 (0xffffb9f04018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7527000. Read at address 0x00600018 (0xffffb7527018): 0x00000000 Write at address 0x00600018 (0xffffb7527018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1e44000. Read at address 0x00600018 (0xffffb1e44018): 0x00000000 Write at address 0x00600018 (0xffffb1e44018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa36e1000. Read at address 0x00600018 (0xffffa36e1018): 0x00000000 Write at address 0x00600018 (0xffffa36e1018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97fb8000. Read at address 0x00600018 (0xffff97fb8018): 0x00000000 Write at address 0x00600018 (0xffff97fb8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa0dc7000. Read at address 0x00600018 (0xffffa0dc7018): 0x00000000 Write at address 0x00600018 (0xffffa0dc7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff94e24000. Read at address 0x00600018 (0xffff94e24018): 0x00000000 Write at address 0x00600018 (0xffff94e24018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 236 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9fc9000. Read at address 0x00600018 (0xffffa9fc9018): 0x00000000 Write at address 0x00600018 (0xffffa9fc9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96949000. Read at address 0x00600018 (0xffff96949018): 0x00000000 Write at address 0x00600018 (0xffff96949018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1339000. Read at address 0x00600018 (0xffffb1339018): 0x00000000 Write at address 0x00600018 (0xffffb1339018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9a73000. Read at address 0x00600018 (0xffffa9a73018): 0x00000000 Write at address 0x00600018 (0xffffa9a73018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaef68000. Read at address 0x00600018 (0xffffaef68018): 0x00000000 Write at address 0x00600018 (0xffffaef68018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3f75000. Read at address 0x00600018 (0xffffa3f75018): 0x00000000 Write at address 0x00600018 (0xffffa3f75018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb32c6000. Read at address 0x00600018 (0xffffb32c6018): 0x00000000 Write at address 0x00600018 (0xffffb32c6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbe60d000. Read at address 0x00600018 (0xffffbe60d018): 0x00000000 Write at address 0x00600018 (0xffffbe60d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8944f000. Read at address 0x00600018 (0xffff8944f018): 0x00000000 Write at address 0x00600018 (0xffff8944f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff92fca000. Read at address 0x00600018 (0xffff92fca018): 0x00000000 Write at address 0x00600018 (0xffff92fca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff7fe89000. Read at address 0x00600018 (0xffff7fe89018): 0x00000000 Write at address 0x00600018 (0xffff7fe89018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f8fc000. Read at address 0x00600018 (0xffff8f8fc018): 0x00000000 Write at address 0x00600018 (0xffff8f8fc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ef61000. Read at address 0x00600018 (0xffff9ef61018): 0x00000000 Write at address 0x00600018 (0xffff9ef61018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fda2000. Read at address 0x00600018 (0xffff7fda2018): 0x00000000 Write at address 0x00600018 (0xffff7fda2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95379000. Read at address 0x00600018 (0xffff95379018): 0x00000000 Write at address 0x00600018 (0xffff95379018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84f41000. Read at address 0x00600018 (0xffff84f41018): 0x00000000 Write at address 0x00600018 (0xffff84f41018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bb83000. Read at address 0x00600018 (0xffff9bb83018): 0x00000000 Write at address 0x00600018 (0xffff9bb83018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8f5b8000. Read at address 0x00600018 (0xffff8f5b8018): 0x00000000 Write at address 0x00600018 (0xffff8f5b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0400000. Read at address 0x00600018 (0xffffa0400018): 0x00000000 Write at address 0x00600018 (0xffffa0400018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3a63000. Read at address 0x00600018 (0xffffb3a63018): 0x00000000 Write at address 0x00600018 (0xffffb3a63018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a21e000. Read at address 0x00600018 (0xffff9a21e018): 0x00000000 Write at address 0x00600018 (0xffff9a21e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff807f6000. Read at address 0x00600018 (0xffff807f6018): 0x00000000 Write at address 0x00600018 (0xffff807f6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90bfd000. Read at address 0x00600018 (0xffff90bfd018): 0x00000000 Write at address 0x00600018 (0xffff90bfd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff957d1000. Read at address 0x00600018 (0xffff957d1018): 0x00000000 Write at address 0x00600018 (0xffff957d1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb66eb000. Read at address 0x00600018 (0xffffb66eb018): 0x00000000 Write at address 0x00600018 (0xffffb66eb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6583000. Read at address 0x00600018 (0xffffa6583018): 0x00000000 Write at address 0x00600018 (0xffffa6583018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff89153000. Read at address 0x00600018 (0xffff89153018): 0x00000000 Write at address 0x00600018 (0xffff89153018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start 1727 GC [0] 1798 GC [1] Esel version: 3.102.0.0-IAA10.27 1876 GC [2] 1947 GC [3] 2005 GC [4] 2094 GC [5] 2174 GC [6] 2236 GC [7] 2318 GC [8] 2407 GC [9] 2475 GC [10] DML res1: 0 2637 GC [11] 2716 GC [12] 2894 GC [13] 2985 GC [14] 3057 GC [15] 3248 GC [16] 3264 GC [17] Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb64ff000. Read at address 0x00600018 (0xffffb64ff018): 0x00000000 Write at address 0x00600018 (0xffffb64ff018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1e85000. Read at address 0x00600018 (0xffffb1e85018): 0x00000000 Write at address 0x00600018 (0xffffb1e85018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa665f000. Read at address 0x00600018 (0xffffa665f018): 0x00000000 Write at address 0x00600018 (0xffffa665f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8936c000. Read at address 0x00600018 (0xffff8936c018): 0x00000000 Write at address 0x00600018 (0xffff8936c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5713000. Read at address 0x00600018 (0xffffb5713018): 0x00000000 Write at address 0x00600018 (0xffffb5713018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb24ff000. Read at address 0x00600018 (0xffffb24ff018): 0x00000000 Write at address 0x00600018 (0xffffb24ff018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa9788000. Read at address 0x00600018 (0xffffa9788018): 0x00000000 Write at address 0x00600018 (0xffffa9788018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80e57000. Read at address 0x00600018 (0xffff80e57018): 0x00000000 Write at address 0x00600018 (0xffff80e57018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff86471000. Read at address 0x00600018 (0xffff86471018): 0x00000000 Write at address 0x00600018 (0xffff86471018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9648a000. Read at address 0x00600018 (0xffff9648a018): 0x00000000 Write at address 0x00600018 (0xffff9648a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb88a0000. Read at address 0x00600018 (0xffffb88a0018): 0x00000000 Write at address 0x00600018 (0xffffb88a0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa330a000. Read at address 0x00600018 (0xffffa330a018): 0x00000000 Write at address 0x00600018 (0xffffa330a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa970b000. Read at address 0x00600018 (0xffffa970b018): 0x00000000 Write at address 0x00600018 (0xffffa970b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82971000. Read at address 0x00600018 (0xffff82971018): 0x00000000 Write at address 0x00600018 (0xffff82971018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cbb2000. Read at address 0x00600018 (0xffff9cbb2018): 0x00000000 Write at address 0x00600018 (0xffff9cbb2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b7b8000. Read at address 0x00600018 (0xffff8b7b8018): 0x00000000 Write at address 0x00600018 (0xffff8b7b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe73d000. Read at address 0x00600018 (0xffffbe73d018): 0x00000000 Write at address 0x00600018 (0xffffbe73d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafb7d000. Read at address 0x00600018 (0xffffafb7d018): 0x00000000 Write at address 0x00600018 (0xffffafb7d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff945d9000. Read at address 0x00600018 (0xffff945d9018): 0x00000000 Write at address 0x00600018 (0xffff945d9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9ab94000. Read at address 0x00600018 (0xffff9ab94018): 0x00000000 Write at address 0x00600018 (0xffff9ab94018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86873000. Read at address 0x00600018 (0xffff86873018): 0x00000000 Write at address 0x00600018 (0xffff86873018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8db96000. Read at address 0x00600018 (0xffff8db96018): 0x00000000 Write at address 0x00600018 (0xffff8db96018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ee6e000. Read at address 0x00600018 (0xffff9ee6e018): 0x00000000 Write at address 0x00600018 (0xffff9ee6e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff93320000. Read at address 0x00600018 (0xffff93320018): 0x00000000 Write at address 0x00600018 (0xffff93320018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9770b000. Read at address 0x00600018 (0xffff9770b018): 0x00000000 Write at address 0x00600018 (0xffff9770b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad4e3000. Read at address 0x00600018 (0xffffad4e3018): 0x00000000 Write at address 0x00600018 (0xffffad4e3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff81a27000. Read at address 0x00600018 (0xffff81a27018): 0x00000000 Write at address 0x00600018 (0xffff81a27018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb68d000. Read at address 0x00600018 (0xffffbb68d018): 0x00000000 Write at address 0x00600018 (0xffffbb68d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb080d000. Read at address 0x00600018 (0xffffb080d018): 0x00000000 Write at address 0x00600018 (0xffffb080d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf1ac000. Read at address 0x00600018 (0xffffaf1ac018): 0x00000000 Write at address 0x00600018 (0xffffaf1ac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff92af6000. Read at address 0x00600018 (0xffff92af6018): 0x00000000 Write at address 0x00600018 (0xffff92af6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa44df000. Read at address 0x00600018 (0xffffa44df018): 0x00000000 Write at address 0x00600018 (0xffffa44df018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa879a000. Read at address 0x00600018 (0xffffa879a018): 0x00000000 Write at address 0x00600018 (0xffffa879a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb60f000. Read at address 0x00600018 (0xffffbb60f018): 0x00000000 Write at address 0x00600018 (0xffffbb60f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff919ab000. Read at address 0x00600018 (0xffff919ab018): 0x00000000 Write at address 0x00600018 (0xffff919ab018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff81d8b000. Read at address 0x00600018 (0xffff81d8b018): 0x00000000 Write at address 0x00600018 (0xffff81d8b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 238 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff940d8000. Read at address 0x00600018 (0xffff940d8018): 0x00000000 Write at address 0x00600018 (0xffff940d8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff99b8a000. Read at address 0x00600018 (0xffff99b8a018): 0x00000000 Write at address 0x00600018 (0xffff99b8a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa57c6000. Read at address 0x00600018 (0xffffa57c6018): 0x00000000 Write at address 0x00600018 (0xffffa57c6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b29b000. Read at address 0x00600018 (0xffff9b29b018): 0x00000000 Write at address 0x00600018 (0xffff9b29b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa20f5000. Read at address 0x00600018 (0xffffa20f5018): 0x00000000 Write at address 0x00600018 (0xffffa20f5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff92f38000. Read at address 0x00600018 (0xffff92f38018): 0x00000000 Write at address 0x00600018 (0xffff92f38018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffba5c9000. Read at address 0x00600018 (0xffffba5c9018): 0x00000000 Write at address 0x00600018 (0xffffba5c9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb855e000. Read at address 0x00600018 (0xffffb855e018): 0x00000000 Write at address 0x00600018 (0xffffb855e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf42c000. Read at address 0x00600018 (0xffffaf42c018): 0x00000000 Write at address 0x00600018 (0xffffaf42c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81f84000. Read at address 0x00600018 (0xffff81f84018): 0x00000000 Write at address 0x00600018 (0xffff81f84018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbcb6d000. Read at address 0x00600018 (0xffffbcb6d018): 0x00000000 Write at address 0x00600018 (0xffffbcb6d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 ubi2:dml_code is mounted. data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff96ff3000. Read at address 0x00600018 (0xffff96ff3018): 0x00000000 Write at address 0x00600018 (0xffff96ff3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa0ef9000. Read at address 0x00600018 (0xffffa0ef9018): 0x00000000 Write at address 0x00600018 (0xffffa0ef9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb5585000. Read at address 0x00600018 (0xffffb5585018): 0x00000000 Write at address 0x00600018 (0xffffb5585018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff7fce5000. Read at address 0x00600018 (0xffff7fce5018): 0x00000000 Write at address 0x00600018 (0xffff7fce5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ced0000. Read at address 0x00600018 (0xffff9ced0018): 0x00000000 Write at address 0x00600018 (0xffff9ced0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa52ec000. Read at address 0x00600018 (0xffffa52ec018): 0x00000000 Write at address 0x00600018 (0xffffa52ec018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84961000. Read at address 0x00600018 (0xffff84961018): 0x00000000 Write at address 0x00600018 (0xffff84961018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92c0c000. Read at address 0x00600018 (0xffff92c0c018): 0x00000000 Write at address 0x00600018 (0xffff92c0c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6807000. Read at address 0x00600018 (0xffffa6807018): 0x00000000 Write at address 0x00600018 (0xffffa6807018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff890dd000. Read at address 0x00600018 (0xffff890dd018): 0x00000000 Write at address 0x00600018 (0xffff890dd018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3d2e000. Read at address 0x00600018 (0xffffa3d2e018): 0x00000000 Write at address 0x00600018 (0xffffa3d2e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff941d5000. Read at address 0x00600018 (0xffff941d5018): 0x00000000 Write at address 0x00600018 (0xffff941d5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7f3b000. Read at address 0x00600018 (0xffffa7f3b018): 0x00000000 Write at address 0x00600018 (0xffffa7f3b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9e9ca000. Read at address 0x00600018 (0xffff9e9ca018): 0x00000000 Write at address 0x00600018 (0xffff9e9ca018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9eb01000. Read at address 0x00600018 (0xffff9eb01018): 0x00000000 Write at address 0x00600018 (0xffff9eb01018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad554000. Read at address 0x00600018 (0xffffad554018): 0x00000000 Write at address 0x00600018 (0xffffad554018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9631c000. Read at address 0x00600018 (0xffff9631c018): 0x00000000 Write at address 0x00600018 (0xffff9631c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc2cf000. Read at address 0x00600018 (0xffffbc2cf018): 0x00000000 Write at address 0x00600018 (0xffffbc2cf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff90bf3000. Read at address 0x00600018 (0xffff90bf3018): 0x00000000 Write at address 0x00600018 (0xffff90bf3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff969c5000. Read at address 0x00600018 (0xffff969c5018): 0x00000000 Write at address 0x00600018 (0xffff969c5018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbb504000. Read at address 0x00600018 (0xffffbb504018): 0x00000000 Write at address 0x00600018 (0xffffbb504018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1db2000. Read at address 0x00600018 (0xffffa1db2018): 0x00000000 Write at address 0x00600018 (0xffffa1db2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9749e000. Read at address 0x00600018 (0xffff9749e018): 0x00000000 Write at address 0x00600018 (0xffff9749e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9acbd000. Read at address 0x00600018 (0xffff9acbd018): 0x00000000 Write at address 0x00600018 (0xffff9acbd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3eeb000. Read at address 0x00600018 (0xffffa3eeb018): 0x00000000 Write at address 0x00600018 (0xffffa3eeb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabea0000. Read at address 0x00600018 (0xffffabea0018): 0x00000000 Write at address 0x00600018 (0xffffabea0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad532000. Read at address 0x00600018 (0xffffad532018): 0x00000000 Write at address 0x00600018 (0xffffad532018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffadff7000. Read at address 0x00600018 (0xffffadff7018): 0x00000000 Write at address 0x00600018 (0xffffadff7018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi1:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6d54000. Read at address 0x00600018 (0xffffa6d54018): 0x00000000 Write at address 0x00600018 (0xffffa6d54018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb673f000. Read at address 0x00600018 (0xffffb673f018): 0x00000000 Write at address 0x00600018 (0xffffb673f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9f69000. Read at address 0x00600018 (0xffffb9f69018): 0x00000000 Write at address 0x00600018 (0xffffb9f69018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb4abd000. Read at address 0x00600018 (0xffffb4abd018): 0x00000000 Write at address 0x00600018 (0xffffb4abd018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 net.ipv6.conf.all.disable_ipv6 = 0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9deeb000. Read at address 0x00600018 (0xffff9deeb018): 0x00000000 Write at address 0x00600018 (0xffff9deeb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff904fb000. Read at address 0x00600018 (0xffff904fb018): 0x00000000 Write at address 0x00600018 (0xffff904fb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff89de1000. Read at address 0x00600018 (0xffff89de1018): 0x00000000 Write at address 0x00600018 (0xffff89de1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffacf0e000. Read at address 0x00600018 (0xffffacf0e018): 0x00000000 Write at address 0x00600018 (0xffffacf0e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbbc64000. Read at address 0x00600018 (0xffffbbc64018): 0x00000000 Write at address 0x00600018 (0xffffbbc64018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8aba2000. Read at address 0x00600018 (0xffff8aba2018): 0x00000000 Write at address 0x00600018 (0xffff8aba2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff93747000. Read at address 0x00600018 (0xffff93747018): 0x00000000 Write at address 0x00600018 (0xffff93747018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86db9000. Read at address 0x00600018 (0xffff86db9018): 0x00000000 Write at address 0x00600018 (0xffff86db9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb98bb000. Read at address 0x00600018 (0xffffb98bb018): 0x00000000 Write at address 0x00600018 (0xffffb98bb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9fcb1000. Read at address 0x00600018 (0xffff9fcb1018): 0x00000000 Write at address 0x00600018 (0xffff9fcb1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff999aa000. Read at address 0x00600018 (0xffff999aa018): 0x00000000 Write at address 0x00600018 (0xffff999aa018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff93150000. Read at address 0x00600018 (0xffff93150018): 0x00000000 Write at address 0x00600018 (0xffff93150018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88c74000. Read at address 0x00600018 (0xffff88c74018): 0x00000000 Write at address 0x00600018 (0xffff88c74018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb5e89000. Read at address 0x00600018 (0xffffb5e89018): 0x00000000 Write at address 0x00600018 (0xffffb5e89018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6a4c000. Read at address 0x00600018 (0xffffa6a4c018): 0x00000000 Write at address 0x00600018 (0xffffa6a4c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff86722000. Read at address 0x00600018 (0xffff86722018): 0x00000000 Write at address 0x00600018 (0xffff86722018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86995000. Read at address 0x00600018 (0xffff86995018): 0x00000000 Write at address 0x00600018 (0xffff86995018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabca0000. Read at address 0x00600018 (0xffffabca0018): 0x00000000 Write at address 0x00600018 (0xffffabca0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa74e3000. Read at address 0x00600018 (0xffffa74e3018): 0x00000000 Write at address 0x00600018 (0xffffa74e3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8846b000. Read at address 0x00600018 (0xffff8846b018): 0x00000000 Write at address 0x00600018 (0xffff8846b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d56a000. Read at address 0x00600018 (0xffff8d56a018): 0x00000000 Write at address 0x00600018 (0xffff8d56a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb30fa000. Read at address 0x00600018 (0xffffb30fa018): 0x00000000 Write at address 0x00600018 (0xffffb30fa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9972d000. Read at address 0x00600018 (0xffff9972d018): 0x00000000 Write at address 0x00600018 (0xffff9972d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff82f2c000. Read at address 0x00600018 (0xffff82f2c018): 0x00000000 Write at address 0x00600018 (0xffff82f2c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92640000. Read at address 0x00600018 (0xffff92640018): 0x00000000 Write at address 0x00600018 (0xffff92640018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb4de5000. Read at address 0x00600018 (0xffffb4de5018): 0x00000000 Write at address 0x00600018 (0xffffb4de5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa2192000. Read at address 0x00600018 (0xffffa2192018): 0x00000000 Write at address 0x00600018 (0xffffa2192018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb27e4000. Read at address 0x00600018 (0xffffb27e4018): 0x00000000 Write at address 0x00600018 (0xffffb27e4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaeab9000. Read at address 0x00600018 (0xffffaeab9018): 0x00000000 Write at address 0x00600018 (0xffffaeab9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff86c07000. Read at address 0x00600018 (0xffff86c07018): 0x00000000 Write at address 0x00600018 (0xffff86c07018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6c32000. Read at address 0x00600018 (0xffffb6c32018): 0x00000000 Write at address 0x00600018 (0xffffb6c32018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb4f53000. Read at address 0x00600018 (0xffffb4f53018): 0x00000000 Write at address 0x00600018 (0xffffb4f53018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffafbf2000. Read at address 0x00600018 (0xffffafbf2018): 0x00000000 Write at address 0x00600018 (0xffffafbf2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb0b1d000. Read at address 0x00600018 (0xffffb0b1d018): 0x00000000 Write at address 0x00600018 (0xffffb0b1d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff84577000. Read at address 0x00600018 (0xffff84577018): 0x00000000 Write at address 0x00600018 (0xffff84577018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb09b3000. Read at address 0x00600018 (0xffffb09b3018): 0x00000000 Write at address 0x00600018 (0xffffb09b3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff891f4000. Read at address 0x00600018 (0xffff891f4018): 0x00000000 Write at address 0x00600018 (0xffff891f4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8b745000. Read at address 0x00600018 (0xffff8b745018): 0x00000000 Write at address 0x00600018 (0xffff8b745018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi1:textures is mounted. ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1e5e000. Read at address 0x00600018 (0xffffb1e5e018): 0x00000000 Write at address 0x00600018 (0xffffb1e5e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbda9e000. Read at address 0x00600018 (0xffffbda9e018): 0x00000000 Write at address 0x00600018 (0xffffbda9e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85119000. Read at address 0x00600018 (0xffff85119018): 0x00000000 Write at address 0x00600018 (0xffff85119018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8ef06000. Read at address 0x00600018 (0xffff8ef06018): 0x00000000 Write at address 0x00600018 (0xffff8ef06018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 236 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f69d000. Read at address 0x00600018 (0xffff9f69d018): 0x00000000 Write at address 0x00600018 (0xffff9f69d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c5bf000. Read at address 0x00600018 (0xffff9c5bf018): 0x00000000 Write at address 0x00600018 (0xffff9c5bf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c40b000. Read at address 0x00600018 (0xffff8c40b018): 0x00000000 Write at address 0x00600018 (0xffff8c40b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbaace000. Read at address 0x00600018 (0xffffbaace018): 0x00000000 Write at address 0x00600018 (0xffffbaace018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82e5d000. Read at address 0x00600018 (0xffff82e5d018): 0x00000000 Write at address 0x00600018 (0xffff82e5d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 net.ipv6.conf.all.disable_ipv6 = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80d54000. Read at address 0x00600018 (0xffff80d54018): 0x00000000 Write at address 0x00600018 (0xffff80d54018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa3117000. Read at address 0x00600018 (0xffffa3117018): 0x00000000 Write at address 0x00600018 (0xffffa3117018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb19a3000. Read at address 0x00600018 (0xffffb19a3018): 0x00000000 Write at address 0x00600018 (0xffffb19a3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85c08000. Read at address 0x00600018 (0xffff85c08018): 0x00000000 Write at address 0x00600018 (0xffff85c08018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe066000. Read at address 0x00600018 (0xffffbe066018): 0x00000000 Write at address 0x00600018 (0xffffbe066018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb132c000. Read at address 0x00600018 (0xffffb132c018): 0x00000000 Write at address 0x00600018 (0xffffb132c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb90fc000. Read at address 0x00600018 (0xffffb90fc018): 0x00000000 Write at address 0x00600018 (0xffffb90fc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8701000. Read at address 0x00600018 (0xffffa8701018): 0x00000000 Write at address 0x00600018 (0xffffa8701018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa1386000. Read at address 0x00600018 (0xffffa1386018): 0x00000000 Write at address 0x00600018 (0xffffa1386018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff865c7000. Read at address 0x00600018 (0xffff865c7018): 0x00000000 Write at address 0x00600018 (0xffff865c7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 net.ipv6.conf.all.disable_ipv6 = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa911c000. Read at address 0x00600018 (0xffffa911c018): 0x00000000 Write at address 0x00600018 (0xffffa911c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa02f9000. Read at address 0x00600018 (0xffffa02f9018): 0x00000000 Write at address 0x00600018 (0xffffa02f9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa319b000. Read at address 0x00600018 (0xffffa319b018): 0x00000000 Write at address 0x00600018 (0xffffa319b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff7fa72000. Read at address 0x00600018 (0xffff7fa72018): 0x00000000 Write at address 0x00600018 (0xffff7fa72018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa113a000. Read at address 0x00600018 (0xffffa113a018): 0x00000000 Write at address 0x00600018 (0xffffa113a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8624e000. Read at address 0x00600018 (0xffff8624e018): 0x00000000 Write at address 0x00600018 (0xffff8624e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86d67000. Read at address 0x00600018 (0xffff86d67018): 0x00000000 Write at address 0x00600018 (0xffff86d67018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad4a3000. Read at address 0x00600018 (0xffffad4a3018): 0x00000000 Write at address 0x00600018 (0xffffad4a3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9aa11000. Read at address 0x00600018 (0xffff9aa11018): 0x00000000 Write at address 0x00600018 (0xffff9aa11018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa8619000. Read at address 0x00600018 (0xffffa8619018): 0x00000000 Write at address 0x00600018 (0xffffa8619018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7ccd000. Read at address 0x00600018 (0xffffa7ccd018): 0x00000000 Write at address 0x00600018 (0xffffa7ccd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb318c000. Read at address 0x00600018 (0xffffb318c018): 0x00000000 Write at address 0x00600018 (0xffffb318c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88b48000. Read at address 0x00600018 (0xffff88b48018): 0x00000000 Write at address 0x00600018 (0xffff88b48018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae6ea000. Read at address 0x00600018 (0xffffae6ea018): 0x00000000 Write at address 0x00600018 (0xffffae6ea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf09c000. Read at address 0x00600018 (0xffffaf09c018): 0x00000000 Write at address 0x00600018 (0xffffaf09c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94cd7000. Read at address 0x00600018 (0xffff94cd7018): 0x00000000 Write at address 0x00600018 (0xffff94cd7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff84213000. Read at address 0x00600018 (0xffff84213018): 0x00000000 Write at address 0x00600018 (0xffff84213018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb72fc000. Read at address 0x00600018 (0xffffb72fc018): 0x00000000 Write at address 0x00600018 (0xffffb72fc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b5a4000. Read at address 0x00600018 (0xffff9b5a4018): 0x00000000 Write at address 0x00600018 (0xffff9b5a4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa3730000. Read at address 0x00600018 (0xffffa3730018): 0x00000000 Write at address 0x00600018 (0xffffa3730018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa8678000. Read at address 0x00600018 (0xffffa8678018): 0x00000000 Write at address 0x00600018 (0xffffa8678018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95534000. Read at address 0x00600018 (0xffff95534018): 0x00000000 Write at address 0x00600018 (0xffff95534018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8567000. Read at address 0x00600018 (0xffffb8567018): 0x00000000 Write at address 0x00600018 (0xffffb8567018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c794000. Read at address 0x00600018 (0xffff9c794018): 0x00000000 Write at address 0x00600018 (0xffff9c794018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff843f0000. Read at address 0x00600018 (0xffff843f0018): 0x00000000 Write at address 0x00600018 (0xffff843f0018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff807b6000. Read at address 0x00600018 (0xffff807b6018): 0x00000000 Write at address 0x00600018 (0xffff807b6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa6e3b000. Read at address 0x00600018 (0xffffa6e3b018): 0x00000000 Write at address 0x00600018 (0xffffa6e3b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f742000. Read at address 0x00600018 (0xffff8f742018): 0x00000000 Write at address 0x00600018 (0xffff8f742018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb782c000. Read at address 0x00600018 (0xffffb782c018): 0x00000000 Write at address 0x00600018 (0xffffb782c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb0d44000. Read at address 0x00600018 (0xffffb0d44018): 0x00000000 Write at address 0x00600018 (0xffffb0d44018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8be40000. Read at address 0x00600018 (0xffff8be40018): 0x00000000 Write at address 0x00600018 (0xffff8be40018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8d85b000. Read at address 0x00600018 (0xffff8d85b018): 0x00000000 Write at address 0x00600018 (0xffff8d85b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff96ac0000. Read at address 0x00600018 (0xffff96ac0018): 0x00000000 Write at address 0x00600018 (0xffff96ac0018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f80e000. Read at address 0x00600018 (0xffff8f80e018): 0x00000000 Write at address 0x00600018 (0xffff8f80e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb4060000. Read at address 0x00600018 (0xffffb4060018): 0x00000000 Write at address 0x00600018 (0xffffb4060018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa43ec000. Read at address 0x00600018 (0xffffa43ec018): 0x00000000 Write at address 0x00600018 (0xffffa43ec018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c9f2000. Read at address 0x00600018 (0xffff9c9f2018): 0x00000000 Write at address 0x00600018 (0xffff9c9f2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1852000. Read at address 0x00600018 (0xffffa1852018): 0x00000000 Write at address 0x00600018 (0xffffa1852018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff94d96000. Read at address 0x00600018 (0xffff94d96018): 0x00000000 Write at address 0x00600018 (0xffff94d96018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa252c000. Read at address 0x00600018 (0xffffa252c018): 0x00000000 Write at address 0x00600018 (0xffffa252c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb0ade000. Read at address 0x00600018 (0xffffb0ade018): 0x00000000 Write at address 0x00600018 (0xffffb0ade018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90dfe000. Read at address 0x00600018 (0xffff90dfe018): 0x00000000 Write at address 0x00600018 (0xffff90dfe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff895a1000. Read at address 0x00600018 (0xffff895a1018): 0x00000000 Write at address 0x00600018 (0xffff895a1018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff80ced000. Read at address 0x00600018 (0xffff80ced018): 0x00000000 Write at address 0x00600018 (0xffff80ced018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0229000. Read at address 0x00600018 (0xffffb0229018): 0x00000000 Write at address 0x00600018 (0xffffb0229018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7f1c000. Read at address 0x00600018 (0xffffa7f1c018): 0x00000000 Write at address 0x00600018 (0xffffa7f1c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa53df000. Read at address 0x00600018 (0xffffa53df018): 0x00000000 Write at address 0x00600018 (0xffffa53df018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa0363000. Read at address 0x00600018 (0xffffa0363018): 0x00000000 Write at address 0x00600018 (0xffffa0363018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8f56000. Read at address 0x00600018 (0xffffb8f56018): 0x00000000 Write at address 0x00600018 (0xffffb8f56018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff93a5b000. Read at address 0x00600018 (0xffff93a5b018): 0x00000000 Write at address 0x00600018 (0xffff93a5b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84d8a000. Read at address 0x00600018 (0xffff84d8a018): 0x00000000 Write at address 0x00600018 (0xffff84d8a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c133000. Read at address 0x00600018 (0xffff8c133018): 0x00000000 Write at address 0x00600018 (0xffff8c133018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8a17d000. Read at address 0x00600018 (0xffff8a17d018): 0x00000000 Write at address 0x00600018 (0xffff8a17d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8abf6000. Read at address 0x00600018 (0xffff8abf6018): 0x00000000 Write at address 0x00600018 (0xffff8abf6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7810000. Read at address 0x00600018 (0xffffa7810018): 0x00000000 Write at address 0x00600018 (0xffffa7810018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff91b35000. Read at address 0x00600018 (0xffff91b35018): 0x00000000 Write at address 0x00600018 (0xffff91b35018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff99d58000. Read at address 0x00600018 (0xffff99d58018): 0x00000000 Write at address 0x00600018 (0xffff99d58018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98b8c000. Read at address 0x00600018 (0xffff98b8c018): 0x00000000 Write at address 0x00600018 (0xffff98b8c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa70de000. Read at address 0x00600018 (0xffffa70de018): 0x00000000 Write at address 0x00600018 (0xffffa70de018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff800e1000. Read at address 0x00600018 (0xffff800e1018): 0x00000000 Write at address 0x00600018 (0xffff800e1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f69f000. Read at address 0x00600018 (0xffff9f69f018): 0x00000000 Write at address 0x00600018 (0xffff9f69f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f3ca000. Read at address 0x00600018 (0xffff9f3ca018): 0x00000000 Write at address 0x00600018 (0xffff9f3ca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4eff000. Read at address 0x00600018 (0xffffb4eff018): 0x00000000 Write at address 0x00600018 (0xffffb4eff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffae229000. Read at address 0x00600018 (0xffffae229018): 0x00000000 Write at address 0x00600018 (0xffffae229018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad982000. Read at address 0x00600018 (0xffffad982018): 0x00000000 Write at address 0x00600018 (0xffffad982018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff825cd000. Read at address 0x00600018 (0xffff825cd018): 0x00000000 Write at address 0x00600018 (0xffff825cd018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa8b8000. Read at address 0x00600018 (0xffffaa8b8018): 0x00000000 Write at address 0x00600018 (0xffffaa8b8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff7fa06000. Read at address 0x00600018 (0xffff7fa06018): 0x00000000 Write at address 0x00600018 (0xffff7fa06018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c173000. Read at address 0x00600018 (0xffff8c173018): 0x00000000 Write at address 0x00600018 (0xffff8c173018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd376000. Read at address 0x00600018 (0xffffbd376018): 0x00000000 Write at address 0x00600018 (0xffffbd376018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb8c2d000. Read at address 0x00600018 (0xffffb8c2d018): 0x00000000 Write at address 0x00600018 (0xffffb8c2d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94cfe000. Read at address 0x00600018 (0xffff94cfe018): 0x00000000 Write at address 0x00600018 (0xffff94cfe018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96c64000. Read at address 0x00600018 (0xffff96c64018): 0x00000000 Write at address 0x00600018 (0xffff96c64018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f13c000. Read at address 0x00600018 (0xffff9f13c018): 0x00000000 Write at address 0x00600018 (0xffff9f13c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86c3d000. Read at address 0x00600018 (0xffff86c3d018): 0x00000000 Write at address 0x00600018 (0xffff86c3d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff87a17000. Read at address 0x00600018 (0xffff87a17018): 0x00000000 Write at address 0x00600018 (0xffff87a17018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8fcfe000. Read at address 0x00600018 (0xffff8fcfe018): 0x00000000 Write at address 0x00600018 (0xffff8fcfe018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3857000. Read at address 0x00600018 (0xffffb3857018): 0x00000000 Write at address 0x00600018 (0xffffb3857018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff97ecb000. Read at address 0x00600018 (0xffff97ecb018): 0x00000000 Write at address 0x00600018 (0xffff97ecb018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa1612000. Read at address 0x00600018 (0xffffa1612018): 0x00000000 Write at address 0x00600018 (0xffffa1612018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbeaf3000. Read at address 0x00600018 (0xffffbeaf3018): 0x00000000 Write at address 0x00600018 (0xffffbeaf3018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff82233000. Read at address 0x00600018 (0xffff82233018): 0x00000000 Write at address 0x00600018 (0xffff82233018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95842000. Read at address 0x00600018 (0xffff95842018): 0x00000000 Write at address 0x00600018 (0xffff95842018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb2d3d000. Read at address 0x00600018 (0xffffb2d3d018): 0x00000000 Write at address 0x00600018 (0xffffb2d3d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba9ff000. Read at address 0x00600018 (0xffffba9ff018): 0x00000000 Write at address 0x00600018 (0xffffba9ff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5c91000. Read at address 0x00600018 (0xffffb5c91018): 0x00000000 Write at address 0x00600018 (0xffffb5c91018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81e50000. Read at address 0x00600018 (0xffff81e50018): 0x00000000 Write at address 0x00600018 (0xffff81e50018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff994dd000. Read at address 0x00600018 (0xffff994dd018): 0x00000000 Write at address 0x00600018 (0xffff994dd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa1265000. Read at address 0x00600018 (0xffffa1265018): 0x00000000 Write at address 0x00600018 (0xffffa1265018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88a13000. Read at address 0x00600018 (0xffff88a13018): 0x00000000 Write at address 0x00600018 (0xffff88a13018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6e2d000. Read at address 0x00600018 (0xffffa6e2d018): 0x00000000 Write at address 0x00600018 (0xffffa6e2d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffaa5d8000. Read at address 0x00600018 (0xffffaa5d8018): 0x00000000 Write at address 0x00600018 (0xffffaa5d8018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff7f9d3000. Read at address 0x00600018 (0xffff7f9d3018): 0x00000000 Write at address 0x00600018 (0xffff7f9d3018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8917b000. Read at address 0x00600018 (0xffff8917b018): 0x00000000 Write at address 0x00600018 (0xffff8917b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac249000. Read at address 0x00600018 (0xffffac249018): 0x00000000 Write at address 0x00600018 (0xffffac249018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out rpmsg_char_open: _rpmsg_char_find_ctrldev failed Ipc_InitDriver: rpmsg_char_open failed, retrying... [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff96d8c000. Read at address 0x00600018 (0xffff96d8c018): 0x00000000 Write at address 0x00600018 (0xffff96d8c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffaf7f5000. Read at address 0x00600018 (0xffffaf7f5018): 0x00000000 Write at address 0x00600018 (0xffffaf7f5018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff910ee000. Read at address 0x00600018 (0xffff910ee018): 0x00000000 Write at address 0x00600018 (0xffff910ee018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa71a9000. Read at address 0x00600018 (0xffffa71a9018): 0x00000000 Write at address 0x00600018 (0xffffa71a9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86124000. Read at address 0x00600018 (0xffff86124018): 0x00000000 Write at address 0x00600018 (0xffff86124018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff986b6000. Read at address 0x00600018 (0xffff986b6018): 0x00000000 Write at address 0x00600018 (0xffff986b6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb6b36000. Read at address 0x00600018 (0xffffb6b36018): 0x00000000 Write at address 0x00600018 (0xffffb6b36018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5801000. Read at address 0x00600018 (0xffffb5801018): 0x00000000 Write at address 0x00600018 (0xffffb5801018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 220 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85ba0000. Read at address 0x00600018 (0xffff85ba0018): 0x00000000 Write at address 0x00600018 (0xffff85ba0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9d0f0000. Read at address 0x00600018 (0xffff9d0f0018): 0x00000000 Write at address 0x00600018 (0xffff9d0f0018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8619c000. Read at address 0x00600018 (0xffff8619c018): 0x00000000 Write at address 0x00600018 (0xffff8619c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff83b23000. Read at address 0x00600018 (0xffff83b23018): 0x00000000 Write at address 0x00600018 (0xffff83b23018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9967f000. Read at address 0x00600018 (0xffff9967f018): 0x00000000 Write at address 0x00600018 (0xffff9967f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9250d000. Read at address 0x00600018 (0xffff9250d018): 0x00000000 Write at address 0x00600018 (0xffff9250d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa964d000. Read at address 0x00600018 (0xffffa964d018): 0x00000000 Write at address 0x00600018 (0xffffa964d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff865e2000. Read at address 0x00600018 (0xffff865e2018): 0x00000000 Write at address 0x00600018 (0xffff865e2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffadfba000. Read at address 0x00600018 (0xffffadfba018): 0x00000000 Write at address 0x00600018 (0xffffadfba018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8046a000. Read at address 0x00600018 (0xffff8046a018): 0x00000000 Write at address 0x00600018 (0xffff8046a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9620b000. Read at address 0x00600018 (0xffff9620b018): 0x00000000 Write at address 0x00600018 (0xffff9620b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa1f5e000. Read at address 0x00600018 (0xffffa1f5e018): 0x00000000 Write at address 0x00600018 (0xffffa1f5e018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa577d000. Read at address 0x00600018 (0xffffa577d018): 0x00000000 Write at address 0x00600018 (0xffffa577d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9a603000. Read at address 0x00600018 (0xffff9a603018): 0x00000000 Write at address 0x00600018 (0xffff9a603018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88e31000. Read at address 0x00600018 (0xffff88e31018): 0x00000000 Write at address 0x00600018 (0xffff88e31018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff924d7000. Read at address 0x00600018 (0xffff924d7018): 0x00000000 Write at address 0x00600018 (0xffff924d7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff84932000. Read at address 0x00600018 (0xffff84932018): 0x00000000 Write at address 0x00600018 (0xffff84932018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8edbc000. Read at address 0x00600018 (0xffff8edbc018): 0x00000000 Write at address 0x00600018 (0xffff8edbc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff985d0000. Read at address 0x00600018 (0xffff985d0018): 0x00000000 Write at address 0x00600018 (0xffff985d0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8aea1000. Read at address 0x00600018 (0xffff8aea1018): 0x00000000 Write at address 0x00600018 (0xffff8aea1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8cf07000. Read at address 0x00600018 (0xffff8cf07018): 0x00000000 Write at address 0x00600018 (0xffff8cf07018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac4f8000. Read at address 0x00600018 (0xffffac4f8018): 0x00000000 Write at address 0x00600018 (0xffffac4f8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb4bd000. Read at address 0x00600018 (0xffffbb4bd018): 0x00000000 Write at address 0x00600018 (0xffffbb4bd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1d5b000. Read at address 0x00600018 (0xffffa1d5b018): 0x00000000 Write at address 0x00600018 (0xffffa1d5b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8a89000. Read at address 0x00600018 (0xffffa8a89018): 0x00000000 Write at address 0x00600018 (0xffffa8a89018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88609000. Read at address 0x00600018 (0xffff88609018): 0x00000000 Write at address 0x00600018 (0xffff88609018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabb24000. Read at address 0x00600018 (0xffffabb24018): 0x00000000 Write at address 0x00600018 (0xffffabb24018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d6b4000. Read at address 0x00600018 (0xffff8d6b4018): 0x00000000 Write at address 0x00600018 (0xffff8d6b4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9b144000. Read at address 0x00600018 (0xffff9b144018): 0x00000000 Write at address 0x00600018 (0xffff9b144018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffab949000. Read at address 0x00600018 (0xffffab949018): 0x00000000 Write at address 0x00600018 (0xffffab949018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5bb4000. Read at address 0x00600018 (0xffffa5bb4018): 0x00000000 Write at address 0x00600018 (0xffffa5bb4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8aa80000. Read at address 0x00600018 (0xffff8aa80018): 0x00000000 Write at address 0x00600018 (0xffff8aa80018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb3c82000. Read at address 0x00600018 (0xffffb3c82018): 0x00000000 Write at address 0x00600018 (0xffffb3c82018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa1da0000. Read at address 0x00600018 (0xffffa1da0018): 0x00000000 Write at address 0x00600018 (0xffffa1da0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7887000. Read at address 0x00600018 (0xffffb7887018): 0x00000000 Write at address 0x00600018 (0xffffb7887018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaa2c5000. Read at address 0x00600018 (0xffffaa2c5018): 0x00000000 Write at address 0x00600018 (0xffffaa2c5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb656e000. Read at address 0x00600018 (0xffffb656e018): 0x00000000 Write at address 0x00600018 (0xffffb656e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ab42000. Read at address 0x00600018 (0xffff9ab42018): 0x00000000 Write at address 0x00600018 (0xffff9ab42018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ae8c000. Read at address 0x00600018 (0xffff9ae8c018): 0x00000000 Write at address 0x00600018 (0xffff9ae8c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81c17000. Read at address 0x00600018 (0xffff81c17018): 0x00000000 Write at address 0x00600018 (0xffff81c17018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaa227000. Read at address 0x00600018 (0xffffaa227018): 0x00000000 Write at address 0x00600018 (0xffffaa227018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa90c6000. Read at address 0x00600018 (0xffffa90c6018): 0x00000000 Write at address 0x00600018 (0xffffa90c6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9ed6b000. Read at address 0x00600018 (0xffff9ed6b018): 0x00000000 Write at address 0x00600018 (0xffff9ed6b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4efc000. Read at address 0x00600018 (0xffffa4efc018): 0x00000000 Write at address 0x00600018 (0xffffa4efc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa17d2000. Read at address 0x00600018 (0xffffa17d2018): 0x00000000 Write at address 0x00600018 (0xffffa17d2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa65d5000. Read at address 0x00600018 (0xffffa65d5018): 0x00000000 Write at address 0x00600018 (0xffffa65d5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaeb8f000. Read at address 0x00600018 (0xffffaeb8f018): 0x00000000 Write at address 0x00600018 (0xffffaeb8f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a0f3000. Read at address 0x00600018 (0xffff9a0f3018): 0x00000000 Write at address 0x00600018 (0xffff9a0f3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87d87000. Read at address 0x00600018 (0xffff87d87018): 0x00000000 Write at address 0x00600018 (0xffff87d87018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb92df000. Read at address 0x00600018 (0xffffb92df018): 0x00000000 Write at address 0x00600018 (0xffffb92df018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7812000. Read at address 0x00600018 (0xffffb7812018): 0x00000000 Write at address 0x00600018 (0xffffb7812018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb9227000. Read at address 0x00600018 (0xffffb9227018): 0x00000000 Write at address 0x00600018 (0xffffb9227018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e7b9000. Read at address 0x00600018 (0xffff9e7b9018): 0x00000000 Write at address 0x00600018 (0xffff9e7b9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa8c06000. Read at address 0x00600018 (0xffffa8c06018): 0x00000000 Write at address 0x00600018 (0xffffa8c06018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa403f000. Read at address 0x00600018 (0xffffa403f018): 0x00000000 Write at address 0x00600018 (0xffffa403f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87630000. Read at address 0x00600018 (0xffff87630018): 0x00000000 Write at address 0x00600018 (0xffff87630018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e49d000. Read at address 0x00600018 (0xffff9e49d018): 0x00000000 Write at address 0x00600018 (0xffff9e49d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97fa2000. Read at address 0x00600018 (0xffff97fa2018): 0x00000000 Write at address 0x00600018 (0xffff97fa2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8dcda000. Read at address 0x00600018 (0xffff8dcda018): 0x00000000 Write at address 0x00600018 (0xffff8dcda018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86f00000. Read at address 0x00600018 (0xffff86f00018): 0x00000000 Write at address 0x00600018 (0xffff86f00018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f35a000. Read at address 0x00600018 (0xffff8f35a018): 0x00000000 Write at address 0x00600018 (0xffff8f35a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff848f0000. Read at address 0x00600018 (0xffff848f0018): 0x00000000 Write at address 0x00600018 (0xffff848f0018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ac66000. Read at address 0x00600018 (0xffff8ac66018): 0x00000000 Write at address 0x00600018 (0xffff8ac66018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a1b7000. Read at address 0x00600018 (0xffff8a1b7018): 0x00000000 Write at address 0x00600018 (0xffff8a1b7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadbc8000. Read at address 0x00600018 (0xffffadbc8018): 0x00000000 Write at address 0x00600018 (0xffffadbc8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9438000. Read at address 0x00600018 (0xffffa9438018): 0x00000000 Write at address 0x00600018 (0xffffa9438018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa0b1a000. Read at address 0x00600018 (0xffffa0b1a018): 0x00000000 Write at address 0x00600018 (0xffffa0b1a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a0c6000. Read at address 0x00600018 (0xffff9a0c6018): 0x00000000 Write at address 0x00600018 (0xffff9a0c6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb057b000. Read at address 0x00600018 (0xffffb057b018): 0x00000000 Write at address 0x00600018 (0xffffb057b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf335000. Read at address 0x00600018 (0xffffbf335018): 0x00000000 Write at address 0x00600018 (0xffffbf335018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7209000. Read at address 0x00600018 (0xffffb7209018): 0x00000000 Write at address 0x00600018 (0xffffb7209018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96cc5000. Read at address 0x00600018 (0xffff96cc5018): 0x00000000 Write at address 0x00600018 (0xffff96cc5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82378000. Read at address 0x00600018 (0xffff82378018): 0x00000000 Write at address 0x00600018 (0xffff82378018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97423000. Read at address 0x00600018 (0xffff97423018): 0x00000000 Write at address 0x00600018 (0xffff97423018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4e32000. Read at address 0x00600018 (0xffffa4e32018): 0x00000000 Write at address 0x00600018 (0xffffa4e32018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac946000. Read at address 0x00600018 (0xffffac946018): 0x00000000 Write at address 0x00600018 (0xffffac946018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94308000. Read at address 0x00600018 (0xffff94308018): 0x00000000 Write at address 0x00600018 (0xffff94308018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffba077000. Read at address 0x00600018 (0xffffba077018): 0x00000000 Write at address 0x00600018 (0xffffba077018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb3641000. Read at address 0x00600018 (0xffffb3641018): 0x00000000 Write at address 0x00600018 (0xffffb3641018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa03ed000. Read at address 0x00600018 (0xffffa03ed018): 0x00000000 Write at address 0x00600018 (0xffffa03ed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a0bf000. Read at address 0x00600018 (0xffff8a0bf018): 0x00000000 Write at address 0x00600018 (0xffff8a0bf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91a34000. Read at address 0x00600018 (0xffff91a34018): 0x00000000 Write at address 0x00600018 (0xffff91a34018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff83396000. Read at address 0x00600018 (0xffff83396018): 0x00000000 Write at address 0x00600018 (0xffff83396018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb260d000. Read at address 0x00600018 (0xffffb260d018): 0x00000000 Write at address 0x00600018 (0xffffb260d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb03f8000. Read at address 0x00600018 (0xffffb03f8018): 0x00000000 Write at address 0x00600018 (0xffffb03f8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9474b000. Read at address 0x00600018 (0xffff9474b018): 0x00000000 Write at address 0x00600018 (0xffff9474b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d7b3000. Read at address 0x00600018 (0xffff9d7b3018): 0x00000000 Write at address 0x00600018 (0xffff9d7b3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffae0db000. Read at address 0x00600018 (0xffffae0db018): 0x00000000 Write at address 0x00600018 (0xffffae0db018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83a1b000. Read at address 0x00600018 (0xffff83a1b018): 0x00000000 Write at address 0x00600018 (0xffff83a1b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8017000. Read at address 0x00600018 (0xffffa8017018): 0x00000000 Write at address 0x00600018 (0xffffa8017018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4a66000. Read at address 0x00600018 (0xffffb4a66018): 0x00000000 Write at address 0x00600018 (0xffffb4a66018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8d1ce000. Read at address 0x00600018 (0xffff8d1ce018): 0x00000000 Write at address 0x00600018 (0xffff8d1ce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb0cb0000. Read at address 0x00600018 (0xffffb0cb0018): 0x00000000 Write at address 0x00600018 (0xffffb0cb0018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff902d4000. Read at address 0x00600018 (0xffff902d4018): 0x00000000 Write at address 0x00600018 (0xffff902d4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb688c000. Read at address 0x00600018 (0xffffb688c018): 0x00000000 Write at address 0x00600018 (0xffffb688c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92a3b000. Read at address 0x00600018 (0xffff92a3b018): 0x00000000 Write at address 0x00600018 (0xffff92a3b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff84e24000. Read at address 0x00600018 (0xffff84e24018): 0x00000000 Write at address 0x00600018 (0xffff84e24018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8d68000. Read at address 0x00600018 (0xffffb8d68018): 0x00000000 Write at address 0x00600018 (0xffffb8d68018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85693000. Read at address 0x00600018 (0xffff85693018): 0x00000000 Write at address 0x00600018 (0xffff85693018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8bbda000. Read at address 0x00600018 (0xffff8bbda018): 0x00000000 Write at address 0x00600018 (0xffff8bbda018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9595a000. Read at address 0x00600018 (0xffff9595a018): 0x00000000 Write at address 0x00600018 (0xffff9595a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbb878000. Read at address 0x00600018 (0xffffbb878018): 0x00000000 Write at address 0x00600018 (0xffffbb878018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb41e5000. Read at address 0x00600018 (0xffffb41e5018): 0x00000000 Write at address 0x00600018 (0xffffb41e5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9f8b0000. Read at address 0x00600018 (0xffff9f8b0018): 0x00000000 Write at address 0x00600018 (0xffff9f8b0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbadc8000. Read at address 0x00600018 (0xffffbadc8018): 0x00000000 Write at address 0x00600018 (0xffffbadc8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb1401000. Read at address 0x00600018 (0xffffb1401018): 0x00000000 Write at address 0x00600018 (0xffffb1401018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d1f3000. Read at address 0x00600018 (0xffff9d1f3018): 0x00000000 Write at address 0x00600018 (0xffff9d1f3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff932fb000. Read at address 0x00600018 (0xffff932fb018): 0x00000000 Write at address 0x00600018 (0xffff932fb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f001000. Read at address 0x00600018 (0xffff8f001018): 0x00000000 Write at address 0x00600018 (0xffff8f001018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6dd4000. Read at address 0x00600018 (0xffffb6dd4018): 0x00000000 Write at address 0x00600018 (0xffffb6dd4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb37c000. Read at address 0x00600018 (0xffffbb37c018): 0x00000000 Write at address 0x00600018 (0xffffbb37c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1282000. Read at address 0x00600018 (0xffffa1282018): 0x00000000 Write at address 0x00600018 (0xffffa1282018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f762000. Read at address 0x00600018 (0xffff8f762018): 0x00000000 Write at address 0x00600018 (0xffff8f762018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97c75000. Read at address 0x00600018 (0xffff97c75018): 0x00000000 Write at address 0x00600018 (0xffff97c75018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb92e6000. Read at address 0x00600018 (0xffffb92e6018): 0x00000000 Write at address 0x00600018 (0xffffb92e6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb932e000. Read at address 0x00600018 (0xffffb932e018): 0x00000000 Write at address 0x00600018 (0xffffb932e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8a07a000. Read at address 0x00600018 (0xffff8a07a018): 0x00000000 Write at address 0x00600018 (0xffff8a07a018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4034000. Read at address 0x00600018 (0xffffb4034018): 0x00000000 Write at address 0x00600018 (0xffffb4034018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa899f000. Read at address 0x00600018 (0xffffa899f018): 0x00000000 Write at address 0x00600018 (0xffffa899f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92cea000. Read at address 0x00600018 (0xffff92cea018): 0x00000000 Write at address 0x00600018 (0xffff92cea018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi1:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8c317000. Read at address 0x00600018 (0xffff8c317018): 0x00000000 Write at address 0x00600018 (0xffff8c317018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b104000. Read at address 0x00600018 (0xffff9b104018): 0x00000000 Write at address 0x00600018 (0xffff9b104018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb9499000. Read at address 0x00600018 (0xffffb9499018): 0x00000000 Write at address 0x00600018 (0xffffb9499018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff913e0000. Read at address 0x00600018 (0xffff913e0018): 0x00000000 Write at address 0x00600018 (0xffff913e0018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 net.ipv6.conf.all.disable_ipv6 = 0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8dfe9000. Read at address 0x00600018 (0xffff8dfe9018): 0x00000000 Write at address 0x00600018 (0xffff8dfe9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb5221000. Read at address 0x00600018 (0xffffb5221018): 0x00000000 Write at address 0x00600018 (0xffffb5221018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81e55000. Read at address 0x00600018 (0xffff81e55018): 0x00000000 Write at address 0x00600018 (0xffff81e55018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89352000. Read at address 0x00600018 (0xffff89352018): 0x00000000 Write at address 0x00600018 (0xffff89352018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7d8e000. Read at address 0x00600018 (0xffffb7d8e018): 0x00000000 Write at address 0x00600018 (0xffffb7d8e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffae52b000. Read at address 0x00600018 (0xffffae52b018): 0x00000000 Write at address 0x00600018 (0xffffae52b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff85c4f000. Read at address 0x00600018 (0xffff85c4f018): 0x00000000 Write at address 0x00600018 (0xffff85c4f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9add000. Read at address 0x00600018 (0xffffa9add018): 0x00000000 Write at address 0x00600018 (0xffffa9add018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f666000. Read at address 0x00600018 (0xffff9f666018): 0x00000000 Write at address 0x00600018 (0xffff9f666018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae93f000. Read at address 0x00600018 (0xffffae93f018): 0x00000000 Write at address 0x00600018 (0xffffae93f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb8252000. Read at address 0x00600018 (0xffffb8252018): 0x00000000 Write at address 0x00600018 (0xffffb8252018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff872e4000. Read at address 0x00600018 (0xffff872e4018): 0x00000000 Write at address 0x00600018 (0xffff872e4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa11a0000. Read at address 0x00600018 (0xffffa11a0018): 0x00000000 Write at address 0x00600018 (0xffffa11a0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ff79000. Read at address 0x00600018 (0xffff9ff79018): 0x00000000 Write at address 0x00600018 (0xffff9ff79018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa46e0000. Read at address 0x00600018 (0xffffa46e0018): 0x00000000 Write at address 0x00600018 (0xffffa46e0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff99bc0000. Read at address 0x00600018 (0xffff99bc0018): 0x00000000 Write at address 0x00600018 (0xffff99bc0018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9afd9000. Read at address 0x00600018 (0xffff9afd9018): 0x00000000 Write at address 0x00600018 (0xffff9afd9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8dd7c000. Read at address 0x00600018 (0xffff8dd7c018): 0x00000000 Write at address 0x00600018 (0xffff8dd7c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c0ed000. Read at address 0x00600018 (0xffff9c0ed018): 0x00000000 Write at address 0x00600018 (0xffff9c0ed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffba934000. Read at address 0x00600018 (0xffffba934018): 0x00000000 Write at address 0x00600018 (0xffffba934018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9602a000. Read at address 0x00600018 (0xffff9602a018): 0x00000000 Write at address 0x00600018 (0xffff9602a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb6f18000. Read at address 0x00600018 (0xffffb6f18018): 0x00000000 Write at address 0x00600018 (0xffffb6f18018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85e4d000. Read at address 0x00600018 (0xffff85e4d018): 0x00000000 Write at address 0x00600018 (0xffff85e4d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff84df4000. Read at address 0x00600018 (0xffff84df4018): 0x00000000 Write at address 0x00600018 (0xffff84df4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb658e000. Read at address 0x00600018 (0xffffb658e018): 0x00000000 Write at address 0x00600018 (0xffffb658e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9a251000. Read at address 0x00600018 (0xffff9a251018): 0x00000000 Write at address 0x00600018 (0xffff9a251018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffba004000. Read at address 0x00600018 (0xffffba004018): 0x00000000 Write at address 0x00600018 (0xffffba004018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb126d000. Read at address 0x00600018 (0xffffb126d018): 0x00000000 Write at address 0x00600018 (0xffffb126d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff823c2000. Read at address 0x00600018 (0xffff823c2018): 0x00000000 Write at address 0x00600018 (0xffff823c2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9d7dc000. Read at address 0x00600018 (0xffff9d7dc018): 0x00000000 Write at address 0x00600018 (0xffff9d7dc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c1e7000. Read at address 0x00600018 (0xffff8c1e7018): 0x00000000 Write at address 0x00600018 (0xffff8c1e7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff87032000. Read at address 0x00600018 (0xffff87032018): 0x00000000 Write at address 0x00600018 (0xffff87032018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 237 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb08b3000. Read at address 0x00600018 (0xffffb08b3018): 0x00000000 Write at address 0x00600018 (0xffffb08b3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2a35000. Read at address 0x00600018 (0xffffa2a35018): 0x00000000 Write at address 0x00600018 (0xffffa2a35018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff980e4000. Read at address 0x00600018 (0xffff980e4018): 0x00000000 Write at address 0x00600018 (0xffff980e4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa9c7c000. Read at address 0x00600018 (0xffffa9c7c018): 0x00000000 Write at address 0x00600018 (0xffffa9c7c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb785e000. Read at address 0x00600018 (0xffffb785e018): 0x00000000 Write at address 0x00600018 (0xffffb785e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb05b5000. Read at address 0x00600018 (0xffffb05b5018): 0x00000000 Write at address 0x00600018 (0xffffb05b5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa0966000. Read at address 0x00600018 (0xffffa0966018): 0x00000000 Write at address 0x00600018 (0xffffa0966018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d5a1000. Read at address 0x00600018 (0xffff9d5a1018): 0x00000000 Write at address 0x00600018 (0xffff9d5a1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbba11000. Read at address 0x00600018 (0xffffbba11018): 0x00000000 Write at address 0x00600018 (0xffffbba11018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87aa1000. Read at address 0x00600018 (0xffff87aa1018): 0x00000000 Write at address 0x00600018 (0xffff87aa1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9746000. Read at address 0x00600018 (0xffffb9746018): 0x00000000 Write at address 0x00600018 (0xffffb9746018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbeef8000. Read at address 0x00600018 (0xffffbeef8018): 0x00000000 Write at address 0x00600018 (0xffffbeef8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9bf85000. Read at address 0x00600018 (0xffff9bf85018): 0x00000000 Write at address 0x00600018 (0xffff9bf85018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbcd6a000. Read at address 0x00600018 (0xffffbcd6a018): 0x00000000 Write at address 0x00600018 (0xffffbcd6a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2ef5000. Read at address 0x00600018 (0xffffb2ef5018): 0x00000000 Write at address 0x00600018 (0xffffb2ef5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff97f51000. Read at address 0x00600018 (0xffff97f51018): 0x00000000 Write at address 0x00600018 (0xffff97f51018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8bf3a000. Read at address 0x00600018 (0xffff8bf3a018): 0x00000000 Write at address 0x00600018 (0xffff8bf3a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8ee76000. Read at address 0x00600018 (0xffff8ee76018): 0x00000000 Write at address 0x00600018 (0xffff8ee76018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88183000. Read at address 0x00600018 (0xffff88183018): 0x00000000 Write at address 0x00600018 (0xffff88183018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff837c8000. Read at address 0x00600018 (0xffff837c8018): 0x00000000 Write at address 0x00600018 (0xffff837c8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9a512000. Read at address 0x00600018 (0xffff9a512018): 0x00000000 Write at address 0x00600018 (0xffff9a512018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb37ef000. Read at address 0x00600018 (0xffffb37ef018): 0x00000000 Write at address 0x00600018 (0xffffb37ef018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ca8c000. Read at address 0x00600018 (0xffff9ca8c018): 0x00000000 Write at address 0x00600018 (0xffff9ca8c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a195000. Read at address 0x00600018 (0xffff8a195018): 0x00000000 Write at address 0x00600018 (0xffff8a195018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83a12000. Read at address 0x00600018 (0xffff83a12018): 0x00000000 Write at address 0x00600018 (0xffff83a12018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff94dd7000. Read at address 0x00600018 (0xffff94dd7018): 0x00000000 Write at address 0x00600018 (0xffff94dd7018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9255e000. Read at address 0x00600018 (0xffff9255e018): 0x00000000 Write at address 0x00600018 (0xffff9255e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8086c000. Read at address 0x00600018 (0xffff8086c018): 0x00000000 Write at address 0x00600018 (0xffff8086c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff876ce000. Read at address 0x00600018 (0xffff876ce018): 0x00000000 Write at address 0x00600018 (0xffff876ce018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d93b000. Read at address 0x00600018 (0xffff8d93b018): 0x00000000 Write at address 0x00600018 (0xffff8d93b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff961d9000. Read at address 0x00600018 (0xffff961d9018): 0x00000000 Write at address 0x00600018 (0xffff961d9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff84135000. Read at address 0x00600018 (0xffff84135018): 0x00000000 Write at address 0x00600018 (0xffff84135018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff986ff000. Read at address 0x00600018 (0xffff986ff018): 0x00000000 Write at address 0x00600018 (0xffff986ff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff852ac000. Read at address 0x00600018 (0xffff852ac018): 0x00000000 Write at address 0x00600018 (0xffff852ac018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa0051000. Read at address 0x00600018 (0xffffa0051018): 0x00000000 Write at address 0x00600018 (0xffffa0051018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d1f1000. Read at address 0x00600018 (0xffff8d1f1018): 0x00000000 Write at address 0x00600018 (0xffff8d1f1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb2547000. Read at address 0x00600018 (0xffffb2547018): 0x00000000 Write at address 0x00600018 (0xffffb2547018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa30ce000. Read at address 0x00600018 (0xffffa30ce018): 0x00000000 Write at address 0x00600018 (0xffffa30ce018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8f0e9000. Read at address 0x00600018 (0xffff8f0e9018): 0x00000000 Write at address 0x00600018 (0xffff8f0e9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff96b89000. Read at address 0x00600018 (0xffff96b89018): 0x00000000 Write at address 0x00600018 (0xffff96b89018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0324000. Read at address 0x00600018 (0xffffb0324018): 0x00000000 Write at address 0x00600018 (0xffffb0324018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb912f000. Read at address 0x00600018 (0xffffb912f018): 0x00000000 Write at address 0x00600018 (0xffffb912f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff871bc000. Read at address 0x00600018 (0xffff871bc018): 0x00000000 Write at address 0x00600018 (0xffff871bc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8bff2000. Read at address 0x00600018 (0xffff8bff2018): 0x00000000 Write at address 0x00600018 (0xffff8bff2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached ubi0:textures is mounted. mtd28 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa388e000. Read at address 0x00600018 (0xffffa388e018): 0x00000000 Write at address 0x00600018 (0xffffa388e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2031000. Read at address 0x00600018 (0xffffa2031018): 0x00000000 Write at address 0x00600018 (0xffffa2031018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5553000. Read at address 0x00600018 (0xffffb5553018): 0x00000000 Write at address 0x00600018 (0xffffb5553018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff958c7000. Read at address 0x00600018 (0xffff958c7018): 0x00000000 Write at address 0x00600018 (0xffff958c7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9df54000. Read at address 0x00600018 (0xffff9df54018): 0x00000000 Write at address 0x00600018 (0xffff9df54018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9ded000. Read at address 0x00600018 (0xffffa9ded018): 0x00000000 Write at address 0x00600018 (0xffffa9ded018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbd35f000. Read at address 0x00600018 (0xffffbd35f018): 0x00000000 Write at address 0x00600018 (0xffffbd35f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80b4a000. Read at address 0x00600018 (0xffff80b4a018): 0x00000000 Write at address 0x00600018 (0xffff80b4a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff87b95000. Read at address 0x00600018 (0xffff87b95018): 0x00000000 Write at address 0x00600018 (0xffff87b95018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff997d8000. Read at address 0x00600018 (0xffff997d8018): 0x00000000 Write at address 0x00600018 (0xffff997d8018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff81253000. Read at address 0x00600018 (0xffff81253018): 0x00000000 Write at address 0x00600018 (0xffff81253018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbde6b000. Read at address 0x00600018 (0xffffbde6b018): 0x00000000 Write at address 0x00600018 (0xffffbde6b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae5cf000. Read at address 0x00600018 (0xffffae5cf018): 0x00000000 Write at address 0x00600018 (0xffffae5cf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa00cc000. Read at address 0x00600018 (0xffffa00cc018): 0x00000000 Write at address 0x00600018 (0xffffa00cc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9356b000. Read at address 0x00600018 (0xffff9356b018): 0x00000000 Write at address 0x00600018 (0xffff9356b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9d66000. Read at address 0x00600018 (0xffffa9d66018): 0x00000000 Write at address 0x00600018 (0xffffa9d66018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a4ff000. Read at address 0x00600018 (0xffff9a4ff018): 0x00000000 Write at address 0x00600018 (0xffff9a4ff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8710e000. Read at address 0x00600018 (0xffff8710e018): 0x00000000 Write at address 0x00600018 (0xffff8710e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb0078000. Read at address 0x00600018 (0xffffb0078018): 0x00000000 Write at address 0x00600018 (0xffffb0078018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8544f000. Read at address 0x00600018 (0xffff8544f018): 0x00000000 Write at address 0x00600018 (0xffff8544f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8e824000. Read at address 0x00600018 (0xffff8e824018): 0x00000000 Write at address 0x00600018 (0xffff8e824018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8ca60000. Read at address 0x00600018 (0xffff8ca60018): 0x00000000 Write at address 0x00600018 (0xffff8ca60018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb2f91000. Read at address 0x00600018 (0xffffb2f91018): 0x00000000 Write at address 0x00600018 (0xffffb2f91018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1372000. Read at address 0x00600018 (0xffffa1372018): 0x00000000 Write at address 0x00600018 (0xffffa1372018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4005000. Read at address 0x00600018 (0xffffa4005018): 0x00000000 Write at address 0x00600018 (0xffffa4005018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a98c000. Read at address 0x00600018 (0xffff8a98c018): 0x00000000 Write at address 0x00600018 (0xffff8a98c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa7156000. Read at address 0x00600018 (0xffffa7156018): 0x00000000 Write at address 0x00600018 (0xffffa7156018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8e96000. Read at address 0x00600018 (0xffffb8e96018): 0x00000000 Write at address 0x00600018 (0xffffb8e96018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa239b000. Read at address 0x00600018 (0xffffa239b018): 0x00000000 Write at address 0x00600018 (0xffffa239b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff838b2000. Read at address 0x00600018 (0xffff838b2018): 0x00000000 Write at address 0x00600018 (0xffff838b2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff80fd2000. Read at address 0x00600018 (0xffff80fd2018): 0x00000000 Write at address 0x00600018 (0xffff80fd2018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa26e6000. Read at address 0x00600018 (0xffffa26e6018): 0x00000000 Write at address 0x00600018 (0xffffa26e6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9642d000. Read at address 0x00600018 (0xffff9642d018): 0x00000000 Write at address 0x00600018 (0xffff9642d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb44c4000. Read at address 0x00600018 (0xffffb44c4018): 0x00000000 Write at address 0x00600018 (0xffffb44c4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3744000. Read at address 0x00600018 (0xffffa3744018): 0x00000000 Write at address 0x00600018 (0xffffa3744018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86119000. Read at address 0x00600018 (0xffff86119018): 0x00000000 Write at address 0x00600018 (0xffff86119018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2534000. Read at address 0x00600018 (0xffffb2534018): 0x00000000 Write at address 0x00600018 (0xffffb2534018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa8807000. Read at address 0x00600018 (0xffffa8807018): 0x00000000 Write at address 0x00600018 (0xffffa8807018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae3db000. Read at address 0x00600018 (0xffffae3db018): 0x00000000 Write at address 0x00600018 (0xffffae3db018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi1:dml_code is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa382f000. Read at address 0x00600018 (0xffffa382f018): 0x00000000 Write at address 0x00600018 (0xffffa382f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f3a8000. Read at address 0x00600018 (0xffff9f3a8018): 0x00000000 Write at address 0x00600018 (0xffff9f3a8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb3ba3000. Read at address 0x00600018 (0xffffb3ba3018): 0x00000000 Write at address 0x00600018 (0xffffb3ba3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff94c0b000. Read at address 0x00600018 (0xffff94c0b018): 0x00000000 Write at address 0x00600018 (0xffff94c0b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff86466000. Read at address 0x00600018 (0xffff86466018): 0x00000000 Write at address 0x00600018 (0xffff86466018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9d235000. Read at address 0x00600018 (0xffff9d235018): 0x00000000 Write at address 0x00600018 (0xffff9d235018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9de40000. Read at address 0x00600018 (0xffff9de40018): 0x00000000 Write at address 0x00600018 (0xffff9de40018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9c48f000. Read at address 0x00600018 (0xffff9c48f018): 0x00000000 Write at address 0x00600018 (0xffff9c48f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87a51000. Read at address 0x00600018 (0xffff87a51018): 0x00000000 Write at address 0x00600018 (0xffff87a51018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d53d000. Read at address 0x00600018 (0xffff8d53d018): 0x00000000 Write at address 0x00600018 (0xffff8d53d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff87c63000. Read at address 0x00600018 (0xffff87c63018): 0x00000000 Write at address 0x00600018 (0xffff87c63018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8c0c9000. Read at address 0x00600018 (0xffff8c0c9018): 0x00000000 Write at address 0x00600018 (0xffff8c0c9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff95fed000. Read at address 0x00600018 (0xffff95fed018): 0x00000000 Write at address 0x00600018 (0xffff95fed018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa394d000. Read at address 0x00600018 (0xffffa394d018): 0x00000000 Write at address 0x00600018 (0xffffa394d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89bfa000. Read at address 0x00600018 (0xffff89bfa018): 0x00000000 Write at address 0x00600018 (0xffff89bfa018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff94f8d000. Read at address 0x00600018 (0xffff94f8d018): 0x00000000 Write at address 0x00600018 (0xffff94f8d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7500000. Read at address 0x00600018 (0xffffb7500018): 0x00000000 Write at address 0x00600018 (0xffffb7500018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb56b5000. Read at address 0x00600018 (0xffffb56b5018): 0x00000000 Write at address 0x00600018 (0xffffb56b5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8c768000. Read at address 0x00600018 (0xffff8c768018): 0x00000000 Write at address 0x00600018 (0xffff8c768018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Waiting data available... Loaded PowerVR consumer services. Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa2d89000. Read at address 0x00600018 (0xffffa2d89018): 0x00000000 Write at address 0x00600018 (0xffffa2d89018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 net.ipv6.conf.eth0.dad_transmits = 0 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9300a000. Read at address 0x00600018 (0xffff9300a018): 0x00000000 Write at address 0x00600018 (0xffff9300a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff80035000. Read at address 0x00600018 (0xffff80035018): 0x00000000 Write at address 0x00600018 (0xffff80035018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ceba000. Read at address 0x00600018 (0xffff9ceba018): 0x00000000 Write at address 0x00600018 (0xffff9ceba018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaeb71000. Read at address 0x00600018 (0xffffaeb71018): 0x00000000 Write at address 0x00600018 (0xffffaeb71018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8147d000. Read at address 0x00600018 (0xffff8147d018): 0x00000000 Write at address 0x00600018 (0xffff8147d018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff99f73000. Read at address 0x00600018 (0xffff99f73018): 0x00000000 Write at address 0x00600018 (0xffff99f73018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8bfae000. Read at address 0x00600018 (0xffff8bfae018): 0x00000000 Write at address 0x00600018 (0xffff8bfae018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82db9000. Read at address 0x00600018 (0xffff82db9018): 0x00000000 Write at address 0x00600018 (0xffff82db9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff893b1000. Read at address 0x00600018 (0xffff893b1018): 0x00000000 Write at address 0x00600018 (0xffff893b1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbaa90000. Read at address 0x00600018 (0xffffbaa90018): 0x00000000 Write at address 0x00600018 (0xffffbaa90018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb2258000. Read at address 0x00600018 (0xffffb2258018): 0x00000000 Write at address 0x00600018 (0xffffb2258018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8ed5d000. Read at address 0x00600018 (0xffff8ed5d018): 0x00000000 Write at address 0x00600018 (0xffff8ed5d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffacc32000. Read at address 0x00600018 (0xffffacc32018): 0x00000000 Write at address 0x00600018 (0xffffacc32018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa6fec000. Read at address 0x00600018 (0xffffa6fec018): 0x00000000 Write at address 0x00600018 (0xffffa6fec018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c9a6000. Read at address 0x00600018 (0xffff9c9a6018): 0x00000000 Write at address 0x00600018 (0xffff9c9a6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff91874000. Read at address 0x00600018 (0xffff91874018): 0x00000000 Write at address 0x00600018 (0xffff91874018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa851f000. Read at address 0x00600018 (0xffffa851f018): 0x00000000 Write at address 0x00600018 (0xffffa851f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9fe6d000. Read at address 0x00600018 (0xffff9fe6d018): 0x00000000 Write at address 0x00600018 (0xffff9fe6d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf191000. Read at address 0x00600018 (0xffffbf191018): 0x00000000 Write at address 0x00600018 (0xffffbf191018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffadee9000. Read at address 0x00600018 (0xffffadee9018): 0x00000000 Write at address 0x00600018 (0xffffadee9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4697000. Read at address 0x00600018 (0xffffb4697018): 0x00000000 Write at address 0x00600018 (0xffffb4697018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0c6c000. Read at address 0x00600018 (0xffffb0c6c018): 0x00000000 Write at address 0x00600018 (0xffffb0c6c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff831f9000. Read at address 0x00600018 (0xffff831f9018): 0x00000000 Write at address 0x00600018 (0xffff831f9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi2:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6193000. Read at address 0x00600018 (0xffffa6193018): 0x00000000 Write at address 0x00600018 (0xffffa6193018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5960000. Read at address 0x00600018 (0xffffa5960018): 0x00000000 Write at address 0x00600018 (0xffffa5960018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9be39000. Read at address 0x00600018 (0xffff9be39018): 0x00000000 Write at address 0x00600018 (0xffff9be39018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7433000. Read at address 0x00600018 (0xffffb7433018): 0x00000000 Write at address 0x00600018 (0xffffb7433018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbdda1000. Read at address 0x00600018 (0xffffbdda1018): 0x00000000 Write at address 0x00600018 (0xffffbdda1018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9400b000. Read at address 0x00600018 (0xffff9400b018): 0x00000000 Write at address 0x00600018 (0xffff9400b018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0655000. Read at address 0x00600018 (0xffffb0655018): 0x00000000 Write at address 0x00600018 (0xffffb0655018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf4e4000. Read at address 0x00600018 (0xffffbf4e4018): 0x00000000 Write at address 0x00600018 (0xffffbf4e4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff85b85000. Read at address 0x00600018 (0xffff85b85018): 0x00000000 Write at address 0x00600018 (0xffff85b85018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a432000. Read at address 0x00600018 (0xffff9a432018): 0x00000000 Write at address 0x00600018 (0xffff9a432018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd5c1000. Read at address 0x00600018 (0xffffbd5c1018): 0x00000000 Write at address 0x00600018 (0xffffbd5c1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff80e77000. Read at address 0x00600018 (0xffff80e77018): 0x00000000 Write at address 0x00600018 (0xffff80e77018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4c33000. Read at address 0x00600018 (0xffffa4c33018): 0x00000000 Write at address 0x00600018 (0xffffa4c33018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc25e000. Read at address 0x00600018 (0xffffbc25e018): 0x00000000 Write at address 0x00600018 (0xffffbc25e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff932e6000. Read at address 0x00600018 (0xffff932e6018): 0x00000000 Write at address 0x00600018 (0xffff932e6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97395000. Read at address 0x00600018 (0xffff97395018): 0x00000000 Write at address 0x00600018 (0xffff97395018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8af5c000. Read at address 0x00600018 (0xffff8af5c018): 0x00000000 Write at address 0x00600018 (0xffff8af5c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb7568000. Read at address 0x00600018 (0xffffb7568018): 0x00000000 Write at address 0x00600018 (0xffffb7568018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb9de8000. Read at address 0x00600018 (0xffffb9de8018): 0x00000000 Write at address 0x00600018 (0xffffb9de8018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8d0a5000. Read at address 0x00600018 (0xffff8d0a5018): 0x00000000 Write at address 0x00600018 (0xffff8d0a5018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88eaf000. Read at address 0x00600018 (0xffff88eaf018): 0x00000000 Write at address 0x00600018 (0xffff88eaf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa376e000. Read at address 0x00600018 (0xffffa376e018): 0x00000000 Write at address 0x00600018 (0xffffa376e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa729a000. Read at address 0x00600018 (0xffffa729a018): 0x00000000 Write at address 0x00600018 (0xffffa729a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82c94000. Read at address 0x00600018 (0xffff82c94018): 0x00000000 Write at address 0x00600018 (0xffff82c94018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa18d8000. Read at address 0x00600018 (0xffffa18d8018): 0x00000000 Write at address 0x00600018 (0xffffa18d8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d316000. Read at address 0x00600018 (0xffff8d316018): 0x00000000 Write at address 0x00600018 (0xffff8d316018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa96e1000. Read at address 0x00600018 (0xffffa96e1018): 0x00000000 Write at address 0x00600018 (0xffffa96e1018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac472000. Read at address 0x00600018 (0xffffac472018): 0x00000000 Write at address 0x00600018 (0xffffac472018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9f296000. Read at address 0x00600018 (0xffff9f296018): 0x00000000 Write at address 0x00600018 (0xffff9f296018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa22f0000. Read at address 0x00600018 (0xffffa22f0018): 0x00000000 Write at address 0x00600018 (0xffffa22f0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8f858000. Read at address 0x00600018 (0xffff8f858018): 0x00000000 Write at address 0x00600018 (0xffff8f858018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3ff0000. Read at address 0x00600018 (0xffffa3ff0018): 0x00000000 Write at address 0x00600018 (0xffffa3ff0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9433e000. Read at address 0x00600018 (0xffff9433e018): 0x00000000 Write at address 0x00600018 (0xffff9433e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb0eb6000. Read at address 0x00600018 (0xffffb0eb6018): 0x00000000 Write at address 0x00600018 (0xffffb0eb6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff98a52000. Read at address 0x00600018 (0xffff98a52018): 0x00000000 Write at address 0x00600018 (0xffff98a52018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff81b85000. Read at address 0x00600018 (0xffff81b85018): 0x00000000 Write at address 0x00600018 (0xffff81b85018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaad36000. Read at address 0x00600018 (0xffffaad36018): 0x00000000 Write at address 0x00600018 (0xffffaad36018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf32e000. Read at address 0x00600018 (0xffffaf32e018): 0x00000000 Write at address 0x00600018 (0xffffaf32e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3d13000. Read at address 0x00600018 (0xffffa3d13018): 0x00000000 Write at address 0x00600018 (0xffffa3d13018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi1:textures is mounted. mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 ubi2:dml_code is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff86114000. Read at address 0x00600018 (0xffff86114018): 0x00000000 Write at address 0x00600018 (0xffff86114018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb72e6000. Read at address 0x00600018 (0xffffb72e6018): 0x00000000 Write at address 0x00600018 (0xffffb72e6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffad7a5000. Read at address 0x00600018 (0xffffad7a5018): 0x00000000 Write at address 0x00600018 (0xffffad7a5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff97842000. Read at address 0x00600018 (0xffff97842018): 0x00000000 Write at address 0x00600018 (0xffff97842018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa7e64000. Read at address 0x00600018 (0xffffa7e64018): 0x00000000 Write at address 0x00600018 (0xffffa7e64018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb4b0d000. Read at address 0x00600018 (0xffffb4b0d018): 0x00000000 Write at address 0x00600018 (0xffffb4b0d018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0d76000. Read at address 0x00600018 (0xffffb0d76018): 0x00000000 Write at address 0x00600018 (0xffffb0d76018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4912000. Read at address 0x00600018 (0xffffa4912018): 0x00000000 Write at address 0x00600018 (0xffffa4912018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8be1f000. Read at address 0x00600018 (0xffff8be1f018): 0x00000000 Write at address 0x00600018 (0xffff8be1f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4c2b000. Read at address 0x00600018 (0xffffb4c2b018): 0x00000000 Write at address 0x00600018 (0xffffb4c2b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa4b69000. Read at address 0x00600018 (0xffffa4b69018): 0x00000000 Write at address 0x00600018 (0xffffa4b69018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb1ad7000. Read at address 0x00600018 (0xffffb1ad7018): 0x00000000 Write at address 0x00600018 (0xffffb1ad7018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93d6c000. Read at address 0x00600018 (0xffff93d6c018): 0x00000000 Write at address 0x00600018 (0xffff93d6c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff92892000. Read at address 0x00600018 (0xffff92892018): 0x00000000 Write at address 0x00600018 (0xffff92892018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2e56000. Read at address 0x00600018 (0xffffb2e56018): 0x00000000 Write at address 0x00600018 (0xffffb2e56018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb01de000. Read at address 0x00600018 (0xffffb01de018): 0x00000000 Write at address 0x00600018 (0xffffb01de018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. ubi1:textures is mounted. mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb25bd000. Read at address 0x00600018 (0xffffb25bd018): 0x00000000 Write at address 0x00600018 (0xffffb25bd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8876f000. Read at address 0x00600018 (0xffff8876f018): 0x00000000 Write at address 0x00600018 (0xffff8876f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb741e000. Read at address 0x00600018 (0xffffb741e018): 0x00000000 Write at address 0x00600018 (0xffffb741e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f0e8000. Read at address 0x00600018 (0xffff9f0e8018): 0x00000000 Write at address 0x00600018 (0xffff9f0e8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8f5e6000. Read at address 0x00600018 (0xffff8f5e6018): 0x00000000 Write at address 0x00600018 (0xffff8f5e6018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cdd9000. Read at address 0x00600018 (0xffff9cdd9018): 0x00000000 Write at address 0x00600018 (0xffff9cdd9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92ec7000. Read at address 0x00600018 (0xffff92ec7018): 0x00000000 Write at address 0x00600018 (0xffff92ec7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9299e000. Read at address 0x00600018 (0xffff9299e018): 0x00000000 Write at address 0x00600018 (0xffff9299e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9b46f000. Read at address 0x00600018 (0xffff9b46f018): 0x00000000 Write at address 0x00600018 (0xffff9b46f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2d0c000. Read at address 0x00600018 (0xffffa2d0c018): 0x00000000 Write at address 0x00600018 (0xffffa2d0c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbde63000. Read at address 0x00600018 (0xffffbde63018): 0x00000000 Write at address 0x00600018 (0xffffbde63018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadb1b000. Read at address 0x00600018 (0xffffadb1b018): 0x00000000 Write at address 0x00600018 (0xffffadb1b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8ad5000. Read at address 0x00600018 (0xffffb8ad5018): 0x00000000 Write at address 0x00600018 (0xffffb8ad5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9aa49000. Read at address 0x00600018 (0xffff9aa49018): 0x00000000 Write at address 0x00600018 (0xffff9aa49018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b45a000. Read at address 0x00600018 (0xffff8b45a018): 0x00000000 Write at address 0x00600018 (0xffff8b45a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff99c12000. Read at address 0x00600018 (0xffff99c12018): 0x00000000 Write at address 0x00600018 (0xffff99c12018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9245f000. Read at address 0x00600018 (0xffff9245f018): 0x00000000 Write at address 0x00600018 (0xffff9245f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1a73000. Read at address 0x00600018 (0xffffb1a73018): 0x00000000 Write at address 0x00600018 (0xffffb1a73018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff915db000. Read at address 0x00600018 (0xffff915db018): 0x00000000 Write at address 0x00600018 (0xffff915db018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5752000. Read at address 0x00600018 (0xffffa5752018): 0x00000000 Write at address 0x00600018 (0xffffa5752018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9cbd6000. Read at address 0x00600018 (0xffff9cbd6018): 0x00000000 Write at address 0x00600018 (0xffff9cbd6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb4990000. Read at address 0x00600018 (0xffffb4990018): 0x00000000 Write at address 0x00600018 (0xffffb4990018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc089000. Read at address 0x00600018 (0xffffbc089018): 0x00000000 Write at address 0x00600018 (0xffffbc089018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff80305000. Read at address 0x00600018 (0xffff80305018): 0x00000000 Write at address 0x00600018 (0xffff80305018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a027000. Read at address 0x00600018 (0xffff8a027018): 0x00000000 Write at address 0x00600018 (0xffff8a027018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa18df000. Read at address 0x00600018 (0xffffa18df018): 0x00000000 Write at address 0x00600018 (0xffffa18df018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff826d6000. Read at address 0x00600018 (0xffff826d6018): 0x00000000 Write at address 0x00600018 (0xffff826d6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Memory mapped at address 0xffff811f4000. Read at address 0x00600018 (0xffff811f4018): 0x00000000 Write at address 0x00600018 (0xffff811f4018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa092f000. Read at address 0x00600018 (0xffffa092f018): 0x00000000 Write at address 0x00600018 (0xffffa092f018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff975ca000. Read at address 0x00600018 (0xffff975ca018): 0x00000000 Write at address 0x00600018 (0xffff975ca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9f62a000. Read at address 0x00600018 (0xffff9f62a018): 0x00000000 Write at address 0x00600018 (0xffff9f62a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaf125000. Read at address 0x00600018 (0xffffaf125018): 0x00000000 Write at address 0x00600018 (0xffffaf125018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae284000. Read at address 0x00600018 (0xffffae284018): 0x00000000 Write at address 0x00600018 (0xffffae284018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbca4a000. Read at address 0x00600018 (0xffffbca4a018): 0x00000000 Write at address 0x00600018 (0xffffbca4a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff80085000. Read at address 0x00600018 (0xffff80085018): 0x00000000 Write at address 0x00600018 (0xffff80085018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbc7b0000. Read at address 0x00600018 (0xffffbc7b0018): 0x00000000 Write at address 0x00600018 (0xffffbc7b0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff890d5000. Read at address 0x00600018 (0xffff890d5018): 0x00000000 Write at address 0x00600018 (0xffff890d5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8c704000. Read at address 0x00600018 (0xffff8c704018): 0x00000000 Write at address 0x00600018 (0xffff8c704018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae8d6000. Read at address 0x00600018 (0xffffae8d6018): 0x00000000 Write at address 0x00600018 (0xffffae8d6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb92bf000. Read at address 0x00600018 (0xffffb92bf018): 0x00000000 Write at address 0x00600018 (0xffffb92bf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffacffc000. Read at address 0x00600018 (0xffffacffc018): 0x00000000 Write at address 0x00600018 (0xffffacffc018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa4d33000. Read at address 0x00600018 (0xffffa4d33018): 0x00000000 Write at address 0x00600018 (0xffffa4d33018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff84a96000. Read at address 0x00600018 (0xffff84a96018): 0x00000000 Write at address 0x00600018 (0xffff84a96018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9815000. Read at address 0x00600018 (0xffffb9815018): 0x00000000 Write at address 0x00600018 (0xffffb9815018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff94862000. Read at address 0x00600018 (0xffff94862018): 0x00000000 Write at address 0x00600018 (0xffff94862018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1924000. Read at address 0x00600018 (0xffffa1924018): 0x00000000 Write at address 0x00600018 (0xffffa1924018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb3de7000. Read at address 0x00600018 (0xffffb3de7018): 0x00000000 Write at address 0x00600018 (0xffffb3de7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb01d2000. Read at address 0x00600018 (0xffffb01d2018): 0x00000000 Write at address 0x00600018 (0xffffb01d2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9a397000. Read at address 0x00600018 (0xffff9a397018): 0x00000000 Write at address 0x00600018 (0xffff9a397018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff97c56000. Read at address 0x00600018 (0xffff97c56018): 0x00000000 Write at address 0x00600018 (0xffff97c56018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb126e000. Read at address 0x00600018 (0xffffb126e018): 0x00000000 Write at address 0x00600018 (0xffffb126e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8f141000. Read at address 0x00600018 (0xffff8f141018): 0x00000000 Write at address 0x00600018 (0xffff8f141018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb14b7000. Read at address 0x00600018 (0xffffb14b7018): 0x00000000 Write at address 0x00600018 (0xffffb14b7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91e44000. Read at address 0x00600018 (0xffff91e44018): 0x00000000 Write at address 0x00600018 (0xffff91e44018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbce86000. Read at address 0x00600018 (0xffffbce86018): 0x00000000 Write at address 0x00600018 (0xffffbce86018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf6a2000. Read at address 0x00600018 (0xffffbf6a2018): 0x00000000 Write at address 0x00600018 (0xffffbf6a2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff993cc000. Read at address 0x00600018 (0xffff993cc018): 0x00000000 Write at address 0x00600018 (0xffff993cc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffad910000. Read at address 0x00600018 (0xffffad910018): 0x00000000 Write at address 0x00600018 (0xffffad910018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa5a57000. Read at address 0x00600018 (0xffffa5a57018): 0x00000000 Write at address 0x00600018 (0xffffa5a57018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffacf1a000. Read at address 0x00600018 (0xffffacf1a018): 0x00000000 Write at address 0x00600018 (0xffffacf1a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffaec2a000. Read at address 0x00600018 (0xffffaec2a018): 0x00000000 Write at address 0x00600018 (0xffffaec2a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff80e46000. Read at address 0x00600018 (0xffff80e46018): 0x00000000 Write at address 0x00600018 (0xffff80e46018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabd9e000. Read at address 0x00600018 (0xffffabd9e018): 0x00000000 Write at address 0x00600018 (0xffffabd9e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff93c29000. Read at address 0x00600018 (0xffff93c29018): 0x00000000 Write at address 0x00600018 (0xffff93c29018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff989c4000. Read at address 0x00600018 (0xffff989c4018): 0x00000000 Write at address 0x00600018 (0xffff989c4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb5ab6000. Read at address 0x00600018 (0xffffb5ab6018): 0x00000000 Write at address 0x00600018 (0xffffb5ab6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb1763000. Read at address 0x00600018 (0xffffb1763018): 0x00000000 Write at address 0x00600018 (0xffffb1763018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f339000. Read at address 0x00600018 (0xffff9f339018): 0x00000000 Write at address 0x00600018 (0xffff9f339018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88dbb000. Read at address 0x00600018 (0xffff88dbb018): 0x00000000 Write at address 0x00600018 (0xffff88dbb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi0:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff95e1f000. Read at address 0x00600018 (0xffff95e1f018): 0x00000000 Write at address 0x00600018 (0xffff95e1f018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffad176000. Read at address 0x00600018 (0xffffad176018): 0x00000000 Write at address 0x00600018 (0xffffad176018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. ubi2:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaabf0000. Read at address 0x00600018 (0xffffaabf0018): 0x00000000 Write at address 0x00600018 (0xffffaabf0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa7bae000. Read at address 0x00600018 (0xffffa7bae018): 0x00000000 Write at address 0x00600018 (0xffffa7bae018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8cec6000. Read at address 0x00600018 (0xffff8cec6018): 0x00000000 Write at address 0x00600018 (0xffff8cec6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a8f8000. Read at address 0x00600018 (0xffff8a8f8018): 0x00000000 Write at address 0x00600018 (0xffff8a8f8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb87bd000. Read at address 0x00600018 (0xffffb87bd018): 0x00000000 Write at address 0x00600018 (0xffffb87bd018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff822e2000. Read at address 0x00600018 (0xffff822e2018): 0x00000000 Write at address 0x00600018 (0xffff822e2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9c9cb000. Read at address 0x00600018 (0xffff9c9cb018): 0x00000000 Write at address 0x00600018 (0xffff9c9cb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8b1af000. Read at address 0x00600018 (0xffff8b1af018): 0x00000000 Write at address 0x00600018 (0xffff8b1af018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a8ee000. Read at address 0x00600018 (0xffff9a8ee018): 0x00000000 Write at address 0x00600018 (0xffff9a8ee018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8b9c6000. Read at address 0x00600018 (0xffff8b9c6018): 0x00000000 Write at address 0x00600018 (0xffff8b9c6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa6499000. Read at address 0x00600018 (0xffffa6499018): 0x00000000 Write at address 0x00600018 (0xffffa6499018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9804c000. Read at address 0x00600018 (0xffff9804c018): 0x00000000 Write at address 0x00600018 (0xffff9804c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9cba8000. Read at address 0x00600018 (0xffff9cba8018): 0x00000000 Write at address 0x00600018 (0xffff9cba8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffabadf000. Read at address 0x00600018 (0xffffabadf018): 0x00000000 Write at address 0x00600018 (0xffffabadf018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa13ec000. Read at address 0x00600018 (0xffffa13ec018): 0x00000000 Write at address 0x00600018 (0xffffa13ec018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe21b000. Read at address 0x00600018 (0xffffbe21b018): 0x00000000 Write at address 0x00600018 (0xffffbe21b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff8e414000. Read at address 0x00600018 (0xffff8e414018): 0x00000000 Write at address 0x00600018 (0xffff8e414018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbe188000. Read at address 0x00600018 (0xffffbe188018): 0x00000000 Write at address 0x00600018 (0xffffbe188018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbdb61000. Read at address 0x00600018 (0xffffbdb61018): 0x00000000 Write at address 0x00600018 (0xffffbdb61018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff82979000. Read at address 0x00600018 (0xffff82979018): 0x00000000 Write at address 0x00600018 (0xffff82979018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9fa9000. Read at address 0x00600018 (0xffffa9fa9018): 0x00000000 Write at address 0x00600018 (0xffffa9fa9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9cb27000. Read at address 0x00600018 (0xffff9cb27018): 0x00000000 Write at address 0x00600018 (0xffff9cb27018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff857e7000. Read at address 0x00600018 (0xffff857e7018): 0x00000000 Write at address 0x00600018 (0xffff857e7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa1de3000. Read at address 0x00600018 (0xffffa1de3018): 0x00000000 Write at address 0x00600018 (0xffffa1de3018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffbf031000. Read at address 0x00600018 (0xffffbf031018): 0x00000000 Write at address 0x00600018 (0xffffbf031018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8522c000. Read at address 0x00600018 (0xffff8522c018): 0x00000000 Write at address 0x00600018 (0xffff8522c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa2826000. Read at address 0x00600018 (0xffffa2826018): 0x00000000 Write at address 0x00600018 (0xffffa2826018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbec03000. Read at address 0x00600018 (0xffffbec03018): 0x00000000 Write at address 0x00600018 (0xffffbec03018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffadd70000. Read at address 0x00600018 (0xffffadd70018): 0x00000000 Write at address 0x00600018 (0xffffadd70018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9dff2000. Read at address 0x00600018 (0xffff9dff2018): 0x00000000 Write at address 0x00600018 (0xffff9dff2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb42f5000. Read at address 0x00600018 (0xffffb42f5018): 0x00000000 Write at address 0x00600018 (0xffffb42f5018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb30bc000. Read at address 0x00600018 (0xffffb30bc018): 0x00000000 Write at address 0x00600018 (0xffffb30bc018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb24ef000. Read at address 0x00600018 (0xffffb24ef018): 0x00000000 Write at address 0x00600018 (0xffffb24ef018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. net.ipv6.conf.all.addr_gen_mode = 0 Memory mapped at address 0xffffa3541000. Read at address 0x00600018 (0xffffa3541018): 0x00000000 Write at address 0x00600018 (0xffffa3541018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb0acb000. Read at address 0x00600018 (0xffffb0acb018): 0x00000000 Write at address 0x00600018 (0xffffb0acb018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a42f000. Read at address 0x00600018 (0xffff8a42f018): 0x00000000 Write at address 0x00600018 (0xffff8a42f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90912000. Read at address 0x00600018 (0xffff90912018): 0x00000000 Write at address 0x00600018 (0xffff90912018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff9007b000. Read at address 0x00600018 (0xffff9007b018): 0x00000000 Write at address 0x00600018 (0xffff9007b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffae398000. Read at address 0x00600018 (0xffffae398018): 0x00000000 Write at address 0x00600018 (0xffffae398018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff97ac2000. Read at address 0x00600018 (0xffff97ac2018): 0x00000000 Write at address 0x00600018 (0xffff97ac2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:animations is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffa8f41000. Read at address 0x00600018 (0xffffa8f41018): 0x00000000 Write at address 0x00600018 (0xffffa8f41018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff92218000. Read at address 0x00600018 (0xffff92218018): 0x00000000 Write at address 0x00600018 (0xffff92218018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa406a000. Read at address 0x00600018 (0xffffa406a018): 0x00000000 Write at address 0x00600018 (0xffffa406a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff96e33000. Read at address 0x00600018 (0xffff96e33018): 0x00000000 Write at address 0x00600018 (0xffff96e33018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb984c000. Read at address 0x00600018 (0xffffb984c018): 0x00000000 Write at address 0x00600018 (0xffffb984c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff926b4000. Read at address 0x00600018 (0xffff926b4018): 0x00000000 Write at address 0x00600018 (0xffff926b4018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2076000. Read at address 0x00600018 (0xffffa2076018): 0x00000000 Write at address 0x00600018 (0xffffa2076018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbb0c4000. Read at address 0x00600018 (0xffffbb0c4018): 0x00000000 Write at address 0x00600018 (0xffffbb0c4018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbc1da000. Read at address 0x00600018 (0xffffbc1da018): 0x00000000 Write at address 0x00600018 (0xffffbc1da018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89c15000. Read at address 0x00600018 (0xffff89c15018): 0x00000000 Write at address 0x00600018 (0xffff89c15018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa8f39000. Read at address 0x00600018 (0xffffa8f39018): 0x00000000 Write at address 0x00600018 (0xffffa8f39018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 234 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffbbdad000. Read at address 0x00600018 (0xffffbbdad018): 0x00000000 Write at address 0x00600018 (0xffffbbdad018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached ubi0:textures is mounted. mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb18ad000. Read at address 0x00600018 (0xffffb18ad018): 0x00000000 Write at address 0x00600018 (0xffffb18ad018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff862ff000. Read at address 0x00600018 (0xffff862ff018): 0x00000000 Write at address 0x00600018 (0xffff862ff018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 233 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8fb3a000. Read at address 0x00600018 (0xffff8fb3a018): 0x00000000 Write at address 0x00600018 (0xffff8fb3a018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9f282000. Read at address 0x00600018 (0xffff9f282018): 0x00000000 Write at address 0x00600018 (0xffff9f282018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9ea3a000. Read at address 0x00600018 (0xffff9ea3a018): 0x00000000 Write at address 0x00600018 (0xffff9ea3a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb4c06000. Read at address 0x00600018 (0xffffb4c06018): 0x00000000 Write at address 0x00600018 (0xffffb4c06018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb4383000. Read at address 0x00600018 (0xffffb4383018): 0x00000000 Write at address 0x00600018 (0xffffb4383018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8d965000. Read at address 0x00600018 (0xffff8d965018): 0x00000000 Write at address 0x00600018 (0xffff8d965018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb9786000. Read at address 0x00600018 (0xffffb9786018): 0x00000000 Write at address 0x00600018 (0xffffb9786018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffacb82000. Read at address 0x00600018 (0xffffacb82018): 0x00000000 Write at address 0x00600018 (0xffffacb82018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff83926000. Read at address 0x00600018 (0xffff83926018): 0x00000000 Write at address 0x00600018 (0xffff83926018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9504c000. Read at address 0x00600018 (0xffff9504c018): 0x00000000 Write at address 0x00600018 (0xffff9504c018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa5a64000. Read at address 0x00600018 (0xffffa5a64018): 0x00000000 Write at address 0x00600018 (0xffffa5a64018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff93e84000. Read at address 0x00600018 (0xffff93e84018): 0x00000000 Write at address 0x00600018 (0xffff93e84018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb2fda000. Read at address 0x00600018 (0xffffb2fda018): 0x00000000 Write at address 0x00600018 (0xffffb2fda018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5d9a000. Read at address 0x00600018 (0xffffa5d9a018): 0x00000000 Write at address 0x00600018 (0xffffa5d9a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff83bb9000. Read at address 0x00600018 (0xffff83bb9018): 0x00000000 Write at address 0x00600018 (0xffff83bb9018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5991000. Read at address 0x00600018 (0xffffa5991018): 0x00000000 Write at address 0x00600018 (0xffffa5991018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 ubi2:dml_code is mounted. net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffac90e000. Read at address 0x00600018 (0xffffac90e018): 0x00000000 Write at address 0x00600018 (0xffffac90e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb8f98000. Read at address 0x00600018 (0xffffb8f98018): 0x00000000 Write at address 0x00600018 (0xffffb8f98018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa3399000. Read at address 0x00600018 (0xffffa3399018): 0x00000000 Write at address 0x00600018 (0xffffa3399018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa62b7000. Read at address 0x00600018 (0xffffa62b7018): 0x00000000 Write at address 0x00600018 (0xffffa62b7018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbf441000. Read at address 0x00600018 (0xffffbf441018): 0x00000000 Write at address 0x00600018 (0xffffbf441018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached ubi0:animations is mounted. mtd32 attached ubi1:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffaa039000. Read at address 0x00600018 (0xffffaa039018): 0x00000000 Write at address 0x00600018 (0xffffaa039018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbe19d000. Read at address 0x00600018 (0xffffbe19d018): 0x00000000 Write at address 0x00600018 (0xffffbe19d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa9787000. Read at address 0x00600018 (0xffffa9787018): 0x00000000 Write at address 0x00600018 (0xffffa9787018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff8dd15000. Read at address 0x00600018 (0xffff8dd15018): 0x00000000 Write at address 0x00600018 (0xffff8dd15018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffbebc9000. Read at address 0x00600018 (0xffffbebc9018): 0x00000000 Write at address 0x00600018 (0xffffbebc9018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi1:animations is mounted. RTNETLINK answers: File exists ubi0:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9b778000. Read at address 0x00600018 (0xffff9b778018): 0x00000000 Write at address 0x00600018 (0xffff9b778018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9f7a0000. Read at address 0x00600018 (0xffff9f7a0018): 0x00000000 Write at address 0x00600018 (0xffff9f7a0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 222 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ed53000. Read at address 0x00600018 (0xffff8ed53018): 0x00000000 Write at address 0x00600018 (0xffff8ed53018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb2b17000. Read at address 0x00600018 (0xffffb2b17018): 0x00000000 Write at address 0x00600018 (0xffffb2b17018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi1:animations is mounted. ubi0:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffab03c000. Read at address 0x00600018 (0xffffab03c018): 0x00000000 Write at address 0x00600018 (0xffffab03c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached RTNETLINK answers: File exists ubi0:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xfffface15000. Read at address 0x00600018 (0xfffface15018): 0x00000000 Write at address 0x00600018 (0xfffface15018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff83a93000. Read at address 0x00600018 (0xffff83a93018): 0x00000000 Write at address 0x00600018 (0xffff83a93018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb5e70000. Read at address 0x00600018 (0xffffb5e70018): 0x00000000 Write at address 0x00600018 (0xffffb5e70018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff857a6000. Read at address 0x00600018 (0xffff857a6018): 0x00000000 Write at address 0x00600018 (0xffff857a6018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb8c4f000. Read at address 0x00600018 (0xffffb8c4f018): 0x00000000 Write at address 0x00600018 (0xffffb8c4f018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff89669000. Read at address 0x00600018 (0xffff89669018): 0x00000000 Write at address 0x00600018 (0xffff89669018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb9647000. Read at address 0x00600018 (0xffffb9647018): 0x00000000 Write at address 0x00600018 (0xffffb9647018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa1716000. Read at address 0x00600018 (0xffffa1716018): 0x00000000 Write at address 0x00600018 (0xffffa1716018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists ubi0:animations is mounted. ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff91878000. Read at address 0x00600018 (0xffff91878018): 0x00000000 Write at address 0x00600018 (0xffff91878018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8a23b000. Read at address 0x00600018 (0xffff8a23b018): 0x00000000 Write at address 0x00600018 (0xffff8a23b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8aca0000. Read at address 0x00600018 (0xffff8aca0018): 0x00000000 Write at address 0x00600018 (0xffff8aca0018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffbd8b2000. Read at address 0x00600018 (0xffffbd8b2018): 0x00000000 Write at address 0x00600018 (0xffffbd8b2018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff88fea000. Read at address 0x00600018 (0xffff88fea018): 0x00000000 Write at address 0x00600018 (0xffff88fea018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8b70d000. Read at address 0x00600018 (0xffff8b70d018): 0x00000000 Write at address 0x00600018 (0xffff8b70d018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff84b4c000. Read at address 0x00600018 (0xffff84b4c018): 0x00000000 Write at address 0x00600018 (0xffff84b4c018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa5927000. Read at address 0x00600018 (0xffffa5927018): 0x00000000 Write at address 0x00600018 (0xffffa5927018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2cf0000. Read at address 0x00600018 (0xffffa2cf0018): 0x00000000 Write at address 0x00600018 (0xffffa2cf0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb6255000. Read at address 0x00600018 (0xffffb6255018): 0x00000000 Write at address 0x00600018 (0xffffb6255018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached ubi0:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaca98000. Read at address 0x00600018 (0xffffaca98018): 0x00000000 Write at address 0x00600018 (0xffffaca98018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa9784000. Read at address 0x00600018 (0xffffa9784018): 0x00000000 Write at address 0x00600018 (0xffffa9784018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaff1c000. Read at address 0x00600018 (0xffffaff1c018): 0x00000000 Write at address 0x00600018 (0xffffaff1c018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi0:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff82aae000. Read at address 0x00600018 (0xffff82aae018): 0x00000000 Write at address 0x00600018 (0xffff82aae018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. ubi2:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff9efaf000. Read at address 0x00600018 (0xffff9efaf018): 0x00000000 Write at address 0x00600018 (0xffff9efaf018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff949cc000. Read at address 0x00600018 (0xffff949cc018): 0x00000000 Write at address 0x00600018 (0xffff949cc018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffa638e000. Read at address 0x00600018 (0xffffa638e018): 0x00000000 Write at address 0x00600018 (0xffffa638e018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff85082000. Read at address 0x00600018 (0xffff85082018): 0x00000000 Write at address 0x00600018 (0xffff85082018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff81145000. Read at address 0x00600018 (0xffff81145018): 0x00000000 Write at address 0x00600018 (0xffff81145018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa603e000. Read at address 0x00600018 (0xffffa603e018): 0x00000000 Write at address 0x00600018 (0xffffa603e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 228 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff90615000. Read at address 0x00600018 (0xffff90615018): 0x00000000 Write at address 0x00600018 (0xffff90615018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists ubi1:textures is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffa141a000. Read at address 0x00600018 (0xffffa141a018): 0x00000000 Write at address 0x00600018 (0xffffa141a018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffffb8545000. Read at address 0x00600018 (0xffffb8545018): 0x00000000 Write at address 0x00600018 (0xffffb8545018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. ubi2:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff8ae01000. Read at address 0x00600018 (0xffff8ae01018): 0x00000000 Write at address 0x00600018 (0xffff8ae01018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 221 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff96b40000. Read at address 0x00600018 (0xffff96b40018): 0x00000000 Write at address 0x00600018 (0xffff96b40018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached RTNETLINK answers: File exists ubi0:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff85e8b000. Read at address 0x00600018 (0xffff85e8b018): 0x00000000 Write at address 0x00600018 (0xffff85e8b018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffba3c2000. Read at address 0x00600018 (0xffffba3c2018): 0x00000000 Write at address 0x00600018 (0xffffba3c2018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff88210000. Read at address 0x00600018 (0xffff88210018): 0x00000000 Write at address 0x00600018 (0xffff88210018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd32 attached mtd24 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:textures is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff97bb6000. Read at address 0x00600018 (0xffff97bb6018): 0x00000000 Write at address 0x00600018 (0xffff97bb6018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 ubi2:animations is mounted. net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff9f626000. Read at address 0x00600018 (0xffff9f626018): 0x00000000 Write at address 0x00600018 (0xffff9f626018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb2e06000. Read at address 0x00600018 (0xffffb2e06018): 0x00000000 Write at address 0x00600018 (0xffffb2e06018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffb5f77000. Read at address 0x00600018 (0xffffb5f77018): 0x00000000 Write at address 0x00600018 (0xffffb5f77018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 224 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:dml_code is mounted. ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffffb76ca000. Read at address 0x00600018 (0xffffb76ca018): 0x00000000 Write at address 0x00600018 (0xffffb76ca018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff911b0000. Read at address 0x00600018 (0xffff911b0018): 0x00000000 Write at address 0x00600018 (0xffff911b0018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff85ecb000. Read at address 0x00600018 (0xffff85ecb018): 0x00000000 Write at address 0x00600018 (0xffff85ecb018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi1:textures is mounted. ubi0:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a8f8000. Read at address 0x00600018 (0xffff9a8f8018): 0x00000000 Write at address 0x00600018 (0xffff9a8f8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffac832000. Read at address 0x00600018 (0xffffac832018): 0x00000000 Write at address 0x00600018 (0xffffac832018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. ubi1:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffaf43b000. Read at address 0x00600018 (0xffffaf43b018): 0x00000000 Write at address 0x00600018 (0xffffaf43b018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi0:textures is mounted. ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff916d5000. Read at address 0x00600018 (0xffff916d5018): 0x00000000 Write at address 0x00600018 (0xffff916d5018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 231 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi0:animations is mounted. ubi1:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff89ed9000. Read at address 0x00600018 (0xffff89ed9018): 0x00000000 Write at address 0x00600018 (0xffff89ed9018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 225 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi0:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff98396000. Read at address 0x00600018 (0xffff98396018): 0x00000000 Write at address 0x00600018 (0xffff98396018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 227 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi1:animations is mounted. ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9a534000. Read at address 0x00600018 (0xffff9a534018): 0x00000000 Write at address 0x00600018 (0xffff9a534018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 232 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd24 attached mtd28 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists ubi1:textures is mounted. ubi2:animations is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffff95539000. Read at address 0x00600018 (0xffff95539018): 0x00000000 Write at address 0x00600018 (0xffff95539018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd28 attached mtd32 attached ubi0:textures is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 /dev/mem opened. Memory mapped at address 0xffff8ef58000. Read at address 0x00600018 (0xffff8ef58018): 0x00000000 Write at address 0x00600018 (0xffff8ef58018): 0x00400040, readback 0x00400040 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. ubi1:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffffa2d0e000. Read at address 0x00600018 (0xffffa2d0e018): 0x00000000 Write at address 0x00600018 (0xffffa2d0e018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 223 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd28 attached mtd24 attached mtd32 attached ubi1:textures is mounted. ubi0:animations is mounted. RTNETLINK answers: File exists ubi2:dml_code is mounted. net.ipv6.conf.all.addr_gen_mode = 1 net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 /dev/mem opened. Memory mapped at address 0xffff9e0d3000. Read at address 0x00600018 (0xffff9e0d3018): 0x00000000 Write at address 0x00600018 (0xffff9e0d3018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 229 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd24 attached mtd32 attached mtd28 attached ubi0:textures is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:animations is mounted. ubi1:dml_code is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done /dev/mem opened. Memory mapped at address 0xffff97ff8000. Read at address 0x00600018 (0xffff97ff8018): 0x00000000 Write at address 0x00600018 (0xffff97ff8018): 0x00400040, readback 0x00400040 net.ipv6.conf.all.addr_gen_mode = 0 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 226 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0 SBL2:1210.0.1.0 j-A NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb-dirty NOTICE: BL31: Built : 23:20:15, Mar 4 2024 INIT: version 2.96 booting INIT: Entering runlevel: 5 mtd32 attached mtd28 attached mtd24 attached ubi0:dml_code is mounted. RTNETLINK answers: File exists net.ipv6.conf.all.addr_gen_mode = 1 ubi2:textures is mounted. ubi1:animations is mounted. net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.eth0.dad_transmits = 0 data.LB_FadeInType0=100 data.CHLH_FadeInType0=0 data.WU_FadeInDelay=0 max_time_out=0 No splash screen stop dss Done net.ipv6.neigh.eth0/2.retrans_time_ms = 0 net.ipv6.conf.all.addr_gen_mode = 0 /dev/mem opened. Memory mapped at address 0xffffb9300000. Read at address 0x00600018 (0xffffb9300018): 0x00000000 Write at address 0x00600018 (0xffffb9300018): 0x00400040, readback 0x00400040 net.ipv6.neigh.eth0/2.retrans_time_ms = 1000 Loaded PowerVR consumer services. Waiting data available... Bsw_Wrapper_Status_isReady 512+0 records in 512+0 records out [GuestOs] setup dev message Starting syslogd/klogd: done [GuestOs] Startup data is sent to dml. GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 BSW_Wrapper_DataIsAvailable BSW_Wrapper_WriteSyslog BSW_Read_DML_PID OK - Save_PID: 230 GuestOS: mOther_API_Value->data_available: 1 GuestOS: BSW_mShmSBInfo[BSW_OTHER_API]->ready: 1 DML Start Esel version: 3.102.0.0-IAA10.27 DML res1: 0 Read DML Algo certificate (mtd31) and save to file Read Success Verifying certificate... Verified OK [Authenticate]: The dataset 1 checks CRC PASSED !!! SBL1:1210.0.1.0